SERIES 65-8 To 70-8
Floating Ball Valves for Refinery Applications
Two-Piece, Full And Reduced Port
DelVal*
Flow Controls
delvalflow.com z,)
1-833-DE1VALSTANDARD FEATURES
Quality & Performance
Delval Flow Controls provides a wide range of quality products with the reliability you can count on. All Series 65-8 to 70-8
floating side entry ball valves are manufactured in ISO 9001 certified facilities with a robust quality management system and
according to ASME B16.34 and API 608 standards.
Design Construction and Features
1. Stem Connection
‘Stem connection is available in standard DelVal sizes.
2. Top Flange Drilling
Integral Top Flange is designed as per 1S0 5211 for
direct mounting of actuators and gear operators. Top
flange design provides easy access for adjustment of
Gland boles when the valve is mounted with actuators.
3. Valve Body
Flanged, two-piece design in cast construction. Flanges
are raised face and serrated and dimensions conform to
ASME 8 16.5. Carbon steel valve bodies are finished with
two coats of hard, zinc-rich epoxy for excellent corrosion
resistance
4. Ball
Floating design, precision machined ball with super
finish and sphericity ensures extended seat life and low
‘operating torques. The combination of the balanced seat
design and ball ensures consistent and dependable leak
tightness.
5. Stem
Stem in stainless steel, heavy-duty construction with
double "D" or round and keyed configuration for
positive engagement with all types of valve operator.
‘The lower end of the stem is designed with an integral
collar to be blowout-proof.
6. Seat
Seat is contoured to ensure that all stresses due to the
line pressure are counterbalanced and that the
extrusion of the seat into the body cavity due to sealing
forces is eliminated.
7. Stem Seal
Heavy-duty engineered seal is provided to absorb side
and thrust loads. It also reduces stem torque, protects
stem packing frurn deformation anid gives extended
stem sealing life.
8 Live Loaded Gland Flange
‘Sem packing assembly is live loaded with
Belleville Springs. This ensures continuous compression
(of packing and sealing against internal pressure.
Rocker shaped gland bridge compensates for uneven
adjustment of gland bolts. Adjustable stem packing
‘with multiple graphite rings seal on high surface finish
of the stem and ensures tight sealing, suitable for
fugitive emission control.
‘9. Stem Sealing
‘Stem packing in graphite is live loaded with the gland
‘assembly to ensure positive and trouble free sealing,
‘Adjustment of packing gland is accessible without
disassembly of valve or operator parts.
10. Body Joints
Double seal combination of O-ring and fire safe gasket
ensures perfect body joint sealing and meet or exceed
the fugitive emission requirements across the wide
range of pressure and temperature applications.
11. antistatic Device
‘Al valves include dual grounding systems from stem to
ball and stem tu body. An antistatic Feature is provided
to ensure electrical continuity for assured stem sealing.ENGINEERING SPECIFICATIONS
Pressure-Temperature Rating *Temperature Limits
1500 |ctass 600 Pees aaa
2 103 Material
& roo
z5 69 wee 20) 29) B00 485
BE ony LB 50-45 650345
6 38 Rody crB/CFBM 320-196 1000538
5 A CFBM/CF3M -320 -196 1000538.
0 100 200 300 400 500 PTFE 40 0 352 200
0 38 93° 149 204 260 RPTFE $850 428 220
at ae ULTRA se 50 500 260
FC seat
ULTRAX 5850500260
DEVLON —-58-50-—«302—*150
PEEK “8-50 500260
HNBRAED — -50 -46 302150
Seal VITON"AED 5 “15 392 200
VITON® B 4 20 392 200
srewanesemoertng ing sal ster ofthe hl etn rhe sa
‘ing rset ron.
Note: Tere rans area guid for general sere
Pease consul eal or spec recente
ULTRA Seat
‘An engineered fluorocarbon polymer that is rated for 260°C/500'F. Excellent for handling aggressive fluids at high pressures,
Ultra is recommended for extended service in hostile environments invalving chemical, thermal, and mechanical stress, Ultra
has excellent thermal stability and is ideal for steam, hot gases and a variety of process chemicals where service can also be
subject to pressure cycling.
Standards and Specifications
Delval Series 65-8 to 70-8 Floating Side Entry Ball Valves are designed and manufactured to meet the requirements of the
following industry standards:
Design: API 608, ASME B16.24 Fire Safe Certified: API 6FA/API 607
Face to Face: ASME 816.10 Fugitive Emission: API 641/1SO 15848-182
‘Testing: AP] 598, ISO 5208 ance: PED 2014/68/EU
Pressure Temperature: ASME B16.34 Body Style: Flanged ena/Butt weld end
Rating: Class 150 to Class 300
Flange Accommodation: ASME 816.5, BS EN 1092 “Temp Range: -46°C to 200°C
Butt Weld Ends: ASME B16.25 “SOF to 392°F
NACE: ANSI/ASME MR 0175/ISO 15156-1 **Size Range: 1/2" to 8"
‘Pressure temperature rating shallbe the lesser of the shell rating or the seat rating or the sea ating
“Consult Deval for 2e= not avalabe in the bulletin.DIMENSIONS AND WEIGHTS (FULL PORT)
REFER TO CHART FOR
TOP FLANGE DRILLING
Oe
REFER TO CHART FOR,
LANGE DRILLING
oe
ia
anes oe
SSS
achat teehee
an alele las
Bedseceus
ASME Class 300 (Series 66-8)
Bae tee ea ee arp ieee
a
alsa sae rh lp
a mm pa
pense a ee ery beer es erent alps ert hh
Dimensions (Inch) ASME Class 150 (Series 65-8)
rans
ASME Class 360 (Series 66-8)
[sor Tne one tay aan | ase aas [area pomp oar pan =e a ase ea
on) 50 eo aaron :
tae ace t
Tae) ar 19 eae | Too} Ta | t ¢
a a ae rr ln
Delval reserves rights to change the contents without notice.DIMENSIONS AND WEIGHTS (REDUCED PORT)
REFERTO CHART FOR
TOP FLANGE ORILLING
FLANGE DRILLING
we [w|i [iol [is [ao [sos [vs [as | xe | a | wo | 6 [am | ms [wo] 7 [a | ae
ww ae | wo [mal a | as | mol os asf) mz) ae | nfo | es [so] 7 a)
‘ASME Class 300 (Series 70-8)
Delval reserves rights to change the contents without notice.STANDARD MATERIALS OF CONSTRUCTION
@
|
Part List
Se en See een
nee Description
Cree Eee Coo Stainless Stee!
[ASTM AZT6 WCB, ASTM A352 ASTMIAS51 CF8M/CF8/CF3ICF3M. Graphite sree:
ice ASTM A995 4N/SAVEA #97 |pody Gasket 5$316+Graphice SS276-Graphite/S21003+
1 Body
‘Graphite (fom 6°
> le commaun ASTM ADIG WCB, ASTI AS? ASTMAGS CFMICFAICEIFAM (om 6" onwards) op
— {ASTM A995 AA/SA/EA 8 Stud ASTM A193 B7/L7 ASTM A193 88/B8M_
etapa 9 Nut ASTM A194 2H/Gr.7 ASTM A194 6/8M_
astmsosicreujee —croWoRICRIcraM
3 lean [ASTI A995 ANSE ‘10 |Stem Seal RPTFULTRAPEEK _ RPTEE/ULTRNPEEK
ASTM AtR2 T6308
Se Aenean ‘**11 Stem Packing Graphite Graphite
F316L/F51/F53/ FSS = = 7
ASTM A479 5916/5164,
12 lana astm aaro soe
4 Seat PTFE/RPTFE/ULTRA/PEEK —PTFE/RPTFE/ULTRA/PEEK (ASTM A182 F51/F53/F55
+e Ganenange | ASTHAREWCB—ASTMA951 CFe/crBM
sma narassaissoicyy ASTMAMTS 19° ASTMASIG Gr.70 ASTM A240 55304/SS316
Ssospa9/se03 14 sud ASTMAISS O77 ASTM 199 88/88M
Sem STM ASH PTY 60 crap 7 4H Type 0 AST 7 GR 718
ASTM ANE ESI/ES/rs ASTM ASEA 17.4 Type ani eleile 1BES7GR 78 gry 8637 GR 718
‘washer S508) Ast A479 SS204/SS216
Body Sea sss
fe ee a acre mee 16 [Nut ASTMAISé 24/6r7 |ASTMATB4/@M
~oxher materia from 6" and above may be avaable upon request
‘sRecommended spares.TORQUE DATA (Nm/Lbf-Inch)
Peg
et) SCO ad
fee i
4
= ae ec 3 a 5 a
ve is 810 5 53 8 n
FIC 5 4 6 53
80 10 89 5 133
ot ere 8 n 2 106
810 20 v7 32 28
at bad fc 16 az 26 230
80 25 221 40 354
id er Ic 20 7 32 283
= 810 40 354 60 531
ec 32 283 48 a5,
a a 80 6s 575 100 85
Gd 52 460 20 708
sro 110 974 170 1505
= = Gd 88 78 136 1204
- a 80 330 2521 460 2071
ec 264 2336 368 2257
810 750 5638 500 7365,
: ae ETc 600 5310 720 «72
[BTO: Break To Open Torque ETC: End To Close Torque
Notes:
‘WTorque values are at ambient temperature, media being clear water without any factor of safety
2)For PEEK seated valve torque multiply above valves by 2.
3)Above torque values are indicative and for reference only. Actuator sing torque will depend on service media
4)For reduced port valves, consider torque values corresponding to the lower size e.g, for 8°x 6" reduced port value consider torque value
corresponding to 6
Deval reserves rights to change the content without notice.
Operator Information
Lever Operated Gear Operated Actuator Operated
Valves up to size 6" FP and 8” RP Class 150, Valves ofallsies canbe mounted with _allalves can be mounted with pneumatic or
4° FP and 6° RP Class 300 can be supplied ‘gear operaters for manual operation. electric actuators for complete on-off
with handles for manual operation. Pad Gear operators an also be attached automation Valves can be also mounted with
locking arrangement is provided 2s an wth cnain-wheel operators to open or manual overrides.
option to prevent unauthorized operation close valves located an pipelines at
high elevations.y
100% TESTING
100% SERIALIZATION
CERTIFICATES
= RO,
rth
a
a
ao
‘Manufacturing & Sales- International Manufacturing & Sales -Americas DelVal Arizona International Projects
Delval Flow Controls Pvt. Ltd DelVal Flow Controls USA. Delval Flow Controls USA __DelVal Flow Controls USA
Gat No: 25, Kavathe 6068 Highway 73 1120 W Alameda Dr, Suite3 77 Sugar Creek Center Blvd,
Post javale, Tal. Khandala Geismar, Louisiana 70734 | USA Tempe, Arizona 85282 | USA Suite 600
Dit, Satara Pin-412801 | India 1:1 833:DELVALT 1:41 623-215-7146 Sugar Land, Texas 77478 | USA,
salesindla@delvaliow.com F41 205-744-4328 F:+1 623.215.7187 T: #1 833-DELVALT
sales@deWvaliow.com sales@delvaiow.com projects@delvaliow.com
PC.BLY.018.01_ 09/2023
we