Professional Documents
Culture Documents
Symbol: PW X ×XF
Symbol: PW X ×XF
Symbol: PW X ×XF
Symbol
PWM
Input quantity -- X N2 B1 QP -- Output for positive pulse
Gain factor -- XF QN -- Output for negative pulse
Period duration -- TP T2
Max. pulse width -- TU
Min. pulse width -- TL
Enable -- EN B1
Pulse diagram
PW = X ×XF
QP=1
with the boundary conditions TL £PW £TU. The pulse (QN)
width PW has the unit ms.
If the sign of X ×XF is positive, pulses are output at QP,
and if the sign is negative, pulses are output at QN.
The time interval can be defined via inputs TL and TU (QN)
within whose limits the pulse width can vary. QP=0
TL t
For EN=1, the function block is enabled, for EN=0, PW
inhibited. TU
When configuring, it should be ensured that TP
TL± PW± TU<TP.
PW = pulse width
TP is dominant over TU, TL and PW. A new period = illegal zones outside the limits
starts, independent of TU, TL and PW, after expiration of
Technical data
TP.
Computation time 10 ms
Remarks
TU, TL and TP are internally limited as follows:
0.0 £ TU,TL,TP £ (232--1)×TA