Professional Documents
Culture Documents
(ESI 20-FE-H001) Pump Seal Replacement
(ESI 20-FE-H001) Pump Seal Replacement
Shaft
STEP 1. Assemble the mechanical seal
• Check the surface of the shaft and remove the dust.
• Assemble the "B" onto the casing front cover.
MECHANICAL SEAL
A B
Seal
CAUTION! : All rights are Reserved. No part of this document may be reproduced or translated in whole or in part (Ref: EDCS-A040-F08)
SERVICE INFORMATION
ESI 20-FE-H001 May 21th, 2020
O-ring
Before
After
CAUTION! : All rights are Reserved. No part of this document may be reproduced or translated in whole or in part (Ref: EDCS-A040-F08)
SERVICE INFORMATION
ESI 20-FE-H001 May 21th, 2020
• When insert the springs(8 units), use the grease to secure the springs.
• The springs presses the seal to prevent leakage.
Therefore, please be careful not to let the spring out during assembly.
CAUTION! : All rights are Reserved. No part of this document may be reproduced or translated in whole or in part (Ref: EDCS-A040-F08)