Professional Documents
Culture Documents
1 KEMA N.C Paint Nitrocellulose Paint 1 - 2
1 KEMA N.C Paint Nitrocellulose Paint 1 - 2
Product description
KEMA N.C Paint is a high gloss or matt paint based on nitrocellulose resin. KEMA N.C Paint is
a fast drying topcoat with excellent coverage. It is used for outdoor and indoor repair for metal
or wood surfaces.
Substrates
KEMA N.C paint is used for wood, and metal surfaces, and can be applied over old paints in
good conditions like NC putties, 1K fillers and 2K fillers. The surface should be properly
prepared and thoroughly degreased before application.
Application
Mixing ratio/ volume: 1 KEMA N.C Paint
1:1 1 N.C thinner
Note:
Dryig time :
These products are for the professional painting of automotive vehicles only after reference to
the manufacturer’s Material Safety Data Sheets (MSDS). Revised Jan. 2017
Viscosity :
18-22 sec (F4 at 20°C)
Fluid tip :
1.3 mm
Pressure: 3.0-3.5 bar/ 45-50 psi inlet
NOTE: Refer to manufacturer’s recommendation.
Fluid tip
1.3 mm
Pressure: 2 bar/30 psi inlet
NOTE: Refer to manufacturer’s recommendation.
2 full coats
Recommended dry film thickness is 40-50 microns.
1. For full Health and Safety information please refer to Material Safety Data Sheet (MSDS).
2. Observe the precautionary notices displayed on the container.
3. Goggles and suitable protective equipment must be worn while using these products.
4. Good ventilation must be provided in the working environment.
IMPORTANT NOTE: These products are for professional use only. The information in this
Technical Data Sheet is based on our best knowledge and given for information purposes
only without any obligation as we do not have control over the quality and conditions of the
surface, or over many factors affecting the use and application of the product. Always read
the Material Safety Data Sheet and the Technical Data Sheet for this product if available.
These products are for the professional painting of automotive vehicles only after reference to
the manufacturer’s Material Safety Data Sheets (MSDS). Revised Jan.
2017