Professional Documents
Culture Documents
Minimized Cable Winder 3 Sizes
Minimized Cable Winder 3 Sizes
LY
N
O
EL
Winder [3 Sizes]
D
O
M
3D
secv
VIEW IN BROWSER
Summary
A simplified cable organizer that uses less material and prints faster.
Make sure to like and rate the file if you found it useful!
Tips are also appreciated if you'd like to see more files
from me or if you would like to request changes or
updates to files!
A simplified cable organizer that uses less material and prints faster.
Print Settings:
• Print a pin. Place the flat side on the build plate, not the prongs. Use
at least 3 walls. Infill is not required but will improve the quality of
bridges.
◦ Use the 3mm gap pin for small/normal cables. Use the 5mm pin
for larger cables. Either pin will work in all bodies.
• Print a body. Place the body on its side, open side flat on the build
plate. Use at least three walls. No infill is required.
◦ Use the 50mm body for short cables.
◦ Use the 75mm body for average cables.
◦ Use the 100mm body for long cables.
• (Optional) Print a key. You can insert the key into the gap of the
pin to help you wind your cable.
Model files
cordroll_body50mm.stl
cordroll_body75mm.stl
cordroll_body100mm.stl
cordroll_pin3mm.stl
cordroll_pin5mm.stl
cordroll_key.stl
License
Attribution