Professional Documents
Culture Documents
Potted Configuration Module Installation Into A Backshell
Potted Configuration Module Installation Into A Backshell
List of Parts: Below is a list of parts needed to install a Configuration Module. Parts for
this installation are included in this Configuration Module installation kit along with
other Garmin installation kits, and some are to be provided by the OEM/installer.
Step 2: Insert newly crimped pins (or sockets) and wires (items 3 + 4) into the
appropriate connector housing (item 5) location as specified by the installation
specific wiring diagram.
Step 3: Plug the four conductor wire harness (item 3) into the connector on the module
(item 1).
Step 4: Insert the module (item 1) into the backshell (item 6) recess.
Step 5: Orient the connector housing (item 5) so that the inserted four conductor wire
harness (item 3) is on the same side of the backshell (item 6) as the inserted
module (item 1)—as shown in drawing.
Step 6: Attach cover (item 7) to backshell (item 6) using screws (item 8).