Professional Documents
Culture Documents
Draft Technical Sheet - ALS-HM101 - 201
Draft Technical Sheet - ALS-HM101 - 201
Draft Technical Sheet - ALS-HM101 - 201
Product specifications
Hard Hat- Attached
Component Headband Version
Version
Stainless steel wire, TPE,
Headband and Headband Polyester, Polypropylene, N/A
cover/sleeve Acetal
Stainless steel wire,
N/A
Acetal, Polyamide
Hard Hat Attachment Arm
ABS/TPU ABS/TPU
Earcups
PU Foam PU Foam
Earcups insert
Earcup Cushions and PU Foam and PVC PU Foam and PVC
Cushions Covers
Attenuation Values
Frequenzy HZ 125 250 500 1000 2000 3150 4000 6300 8000 NRR
ALS- ALS- ALS- ALS- ALS- ALS- ALS- ALS- ALS- ALS-
Model
HM101 HM101 HM101 HM101 HM101 HM101 HM101 HM101 HM101 HM101
Mean
Attenuaion DB 14.6 18.6 26.2 32.6 26.4 35.2 34.3 34.0 30.9
Standard
22 dB
Deviation DB 2.5 1.8 2.6 3.2 2.0 2.5 3.2 5.0 4.0
Assumed
Protection DB 12.1 16. 23.6 29.4 34.4 32.7 31.1 29.0 26.9
Headband Force = 1.7 Lbs
INSTRUCTION FOR USE ( according to pictures A-H )
1. Attach the adaptors to each side of the helmet by sliding them into the slots (A).
2. Attach the helmet earmuff into the adaptors by sliding the helmet earmuff housing down
into the adaptor (B).
3. Ensure that the helmet earmuff is firmly attached by lifting the arm up and down.
4. Place the helmet on the head and adjust the earmuffs by sliding the cups up or down
(C-D). The ear cushions should seal firmly against the head. For best results. Remove
all hair under the cushions (F-H).
5. These earmuffs features a standby position. To engage this position, just pull the
earmuffs outward until you hear a distinct click. To obtain user position just push the
earmuffs inward (C-D).
17.07.2022 Page 2/3
Technical Datasheet
Applications
The All Safe® HM Series earmuffs are ideal for protection against noise arising from
a wide range of application in the workplace and leisure activity. Examples of typical
application include :
Do not store the earmuffs in temperature above 130° F (+55° C), for example behind a
windshield or window. Inspect earmuffs regularly for cracked or worn parts, especially the
cushions, Replace as needed. Allsafe recommends replacing foam liners and cushions at least
twice a year in order to maintain acceptable noise reduction, hygiene and comfort.
EPA Requirement
The level of noise entering a person’s ear, when hearing protector is worn as
directed, is closely approximated by the difference between the A-weighted
environmental noise level and the NRR Example :
Additional information
! Warning Any question about the product
All hearing protection affords limited protection. Please contact :
The user is responsible for the proper selection, use, PT. WAHANA SAFETY INDONESIA
care and maintenance of this device. Improper Rukan Gold Coast Blok A No.1-2
selection ( Including under/over protection), use or Jl. Pantai Indah kapuk Boulevard
maintenance may lead to serious hearing loss. If Jakarta 14470, Indonesia
there are any questions concerning this product Phone : +62 21 638 55 111, 2257 2141
contact your safety supervisor or manufacturer. www. Wahanasafety.com
17.07.2022 Page 3/3