Professional Documents
Culture Documents
Practice Mtcre Test
Practice Mtcre Test
1. When sending out an ARP request, an IP host is expecting what kind of address for
an answer?
A. VLAN ID
B. 802.11g
C. IP address
D. MAC Address
2. When adding a static route, you must always ensure that you add both the gateway and
the interface.
true
3. A MikoTik PPPoE Server can be used only within a broadcast domain, that is, users can
not run PPPoE protocol with a server if there is a router between the customer and that PPPoE
server.
true
4. Router A and B are both running as PPPoE servers on different broadcast domains of
your network. Is it possible to set Router A to use “/ppp secret” accounts from Router B to
authenticate PPPoE customers ?
false
5. What is the protocol number used by the EoIP tunnel, to encapsulate Ethernet frames
and send them to the remote side of the EoIP tunnel
A. 47
x
B. 1194
C. 1723
D. 500
6. ECMP provides:
A. per src address load balancing to multiple
gateways
B. per connection load balancing to multiple
gateways
C. per packet load balancing to multiple
gateways
D. per src/dst address pair load balancing to
multiple gateways
7. A MikroTik system administrator implemented OSPF Routing protocol in the network. But
realized that he has a static route on the routers. What can be done to make the static route
work as a failover whenever the dynamic routing protocol fails.
A. He should use “netwatch” to trigger static
8. When adding a user to your local ppp secrets/ppp profiles database, it is possible to
A. Allow/deny use of more than one login by
this user
B. Allow only pppoe login
login by l2tp
D. Set max values for total transferred bytes
10. You want to create a route to the network 192.168.0.0/24. Which of the following is a
legal gateway?
A. 192.168.100.1
B. pppoe-out1
C. 192.168.0.1
D. ether1
confirmation
B. Request, Initialization, Session confirmation
and Offer
C. Initialization, Session confirmation, Request
and Offer
D. Initialization, Offer, Request and
Session confirmation
12. It is possible to have OSPF and BGP configured on the same router?
C. 30
D. 10
14. Consider the following output from the command “/ip address print”:Flags: X – disabled, I –
invalid, D – dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 10.10.10.1/32 10.10.10.2 0.0.0.0 pppoe-1
1 10.10.10.1/32 10.10.10.3 0.0.0.0 pppoe-2This configuration is invalid because of the duplicate
IP’s.
15. Which routing table is used to apply recursive routing at MikroTik RouterOS
A. It is only possible on the x86 platform
B. It is not possible
installed in a router
D. It is only possible in the main routing table
16. There are 6 routers running OSPF and connected with each other using point-to-
point network types. How many Designated Routers are there among them?
A. 15
B. 1
C. 6
D. 0
18. True or False: BGP can be used for internal routing, using one internal AS number.
19. Router has two gateways to reach a certain network both with check gateway
activated. Choose the option you can use to control active and backup gateway.
A. Scope
B. Interface
C. Routing mark
D. Distance
gateway=10.10.0.2
B. /ip route add dst-address=172.16.0.0/24
gateway=10.10.0.2
D. /ip route add dst-address=172.16.0.0/24
21. OSFP area ID does not need to be unique within the AS.
22. Consider the following diagram. We want to communicate from a device on LAN1 to a
device on LAN2. Assuming that all necessary configurations are already included on R2,
which of the following configurations in R1 would enable this communication?
A. /ip route add dst-address=0.0.0.0/0
gateway=192.168.99.2
B. /ip route add dst-address=0.0.0.0/0
gateway=Ether1
C. /ip route add dst-address=192.168.0.0/24
gateway=192.168.0.1
D. /ip route add dst-address=192.168.1.0/24
gateway=192.168.99.2
E. /ip route add dst-address=192.168.1.0/24 src-
address=192.168.0.0/24 gateway=192.168.99.2
23. When using the “check gateway” function in creating a route, the following protocols can be
utilized to ensure the gateway address is reachable (choose all correct answers):
A. ICMP
B. UDP
C. MNDP
D. ARP
device
C. packet will always reach its destination
25. Which is the correct way to set a comment in a OSPF dynamic route:
A. It can be configured by setting up Routing
filters
B. It can be configured manually in the Routing
Table
C. A comment cannot be configured in
a dynamic route