Professional Documents
Culture Documents
LogFileMode Acara 3
LogFileMode Acara 3
LogFileMode Acara 3
Command: *Cancel*
_RIBBON
*Cancel*
COMMANDLINE
Command:
Command:
Command: LOGFILEMODE
Command: LOGFILEMODE
Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]: @800,800
Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]: 80
Command:
Command:
Command: _copy
Select objects: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 52
Command:
Command: _erase
Crossing Lasso Press Spacebar to cycle options2 found
Select objects:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]: @200,200
Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: *Cancel*
Command:
Command: _copy
Select objects: 1 found
Select objects:
Command:
Command: _move
Select objects: 1 found
Select objects:
Select objects:
Select objects:
Select objects:
Command:
Command:
Command: _copy
Select objects: 1 found
Select objects:
Command:
Command: _move
Select objects: 1 found
Select objects:
Command:
Command: _move
Select objects: 1 found
Select objects:
Select objects:
Select objects:
Select objects:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 10
Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 12
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 14
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 14
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 15
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 18
Command:
Command:
Command: _line
Specify first point: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 8
Command:
Command:
Command:
Command:
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select cutting edges ...4 found
Command:
Command: _line
Specify first point: *Cancel*
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _LINETYPE
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _properties
Command:
Command:
Command:
Command:
Command: _move 6 found
Command:
Command:
Command:
Command:
Command:
Command: _move 2 found
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
Command: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Automatic save to C:\Users\acer\AppData\Local\Temp\Drawing1_1_4940_b42b579f.sv$ ...
Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 16
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 16
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 60
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]: d
Specify diameter of circle: 60
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <30.0000>: d
Specify diameter of circle <60.0000>: 32
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 12
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 8
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point: _u
Invalid point.
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command: _copyclip
Select objects: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 73.55
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 73.55
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 21
Command:
Command:
Command:
Command:
Command:
Command:
Command: _properties
Automatic save to C:\Users\acer\AppData\Local\Temp\Drawing1_1_4940_b42b579f.sv$ ...
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command: _line
Specify first point: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point: *Cancel*
Command:
Command: _move
Crossing Lasso Press Spacebar to cycle options31 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>: 10
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 16
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <16.0000>: d
Specify diameter of circle <32.0000>: 16
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <8.0000>: d
Specify diameter of circle <16.0000>: 32
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 50
Command:
Command:
Command: _line
Specify first point: _u
Invalid point.
Command: _u LINE
Command: _u GROUP
Command: _u LINE GROUP
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 50
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 22
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 12
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 10
Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 20
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <16.0000>: d
Specify diameter of circle <32.0000>: 18
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 52
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 8
Command:
Command:
Command:
Command:
Command:
Command: _line
Specify first point: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 14
Command:
Command:
Command: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _properties
Command:
Command: *Cancel*
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _move
Crossing Lasso Press Spacebar to cycle options1 found
Command:
Command:
Command: _move
Select objects: Specify opposite corner: 32 found
Select objects:
Command:
Command:
Command: _LINETYPE
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: _u
All segments already undone.
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _options
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _properties
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: LINE
Command:
Command:
Command: LINE
Select objects:
Command: LINE
Command:
Command: gambar Unknown command "GAMBAR". Press F1 for help.
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command:
Command: _properties
Command: LINE
Command:
Command:
Command:
Command: LINE
Command: LINE
Command:
Command:
Command:
Command:
Command: _LINETYPE
Command:
Command:
Command:
Command:
Command: _LINETYPE
Command:
Command:
Command:
Command:
Command:
Command: LINE
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command: LINE
Command: LINE
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command: linr
Unknown command "LINR". Press F1 for help.
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: LINE
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command:
Command:
Command: _line
Specify first point: *Cancel*
Command:
Command:
Command:
Command:
Command: _properties
Command: *Cancel*
Command:
Command:
Command: *Cancel*
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: LINE
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]: *Cancel*
Command: LINE
Command: LINE
Command: LINE
Command:
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: '_.zoom
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _e Regenerating
model.
Command: ARC
Command: ARC
Command: LINE
Command: _u LINE
Command:
Command:
Command: _move
Window Lasso Press Spacebar to cycle options0 found
Select objects: Specify opposite corner: 54 found
Select objects:
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command: ARC
Command: LINE
Command: ARC
Command:
Command: LINE
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Command:
Command:
Command: _mirror
Window Lasso Press Spacebar to cycle options44 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: N
Command:
Command:
Command: _mirror
Crossing Lasso Press Spacebar to cycle options55 found
Command:
Command:
Command: _mirror
Select objects: 1 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: N
Command:
Command:
Command: _mirror
Crossing Lasso Press Spacebar to cycle options14 found
Command:
Command:
Command: _mirror
Select objects: 1 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: N
Command:
Command:
Command: _mirror
Crossing Lasso Press Spacebar to cycle options14 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: N
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: _u LINE
Command: _u LINE
Command: _u LINE
Command: _u LINE
Command: _u LINE
Command: _u LINE
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command:
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: ARC
Specify start point of arc or [Center]: c
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Command: ARC
Specify start point of arc or [Center]: c
Command: ARC
Command:
Command: _mirror
Window Lasso Press Spacebar to cycle options0 found
Select objects: *Cancel*
Command:
Command: _mirror
Crossing Lasso Press Spacebar to cycle options14 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: *Cancel*
Command:
Command:
Command: _mirror
Crossing Lasso Press Spacebar to cycle options14 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: N
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: LINE
Command: LINE
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project/eRase
Command: LINE
Command: LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command:
Command: LINE
Command: LINE
Command: LINE
Command: LINE
Command: *Cancel*
Command: *Cancel*
Command: _quit
Command:
Command:
Command: _SAVEAS
Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application or Autodesk
licensed application.
Command:
Command:
Window Lasso Press Spacebar to cycle options
Window Lasso Press Spacebar to cycle options
Window Lasso Press Spacebar to cycle options
Crossing Lasso Press Spacebar to cycle options
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command:
Command:
Command:
Command: *Cancel*
Command:
Command:
Command: _PLOT
Command:
Command:
Command: _PLOT
Specify window for printing
Specify first corner: Specify opposite corner: Effective plotting area: 940.01 wide by 1280.00
high
Plotting viewport 2.
Command: *Cancel*
Command: *Cancel*
Command: _quit
Command: