Professional Documents
Culture Documents
Electrical Work Takeoff Sheet
Electrical Work Takeoff Sheet
Electrical Work Takeoff Sheet
T D S
37
13
15
1
6
15
34
18
5
5
15
25
Electrical Installation Takeoff sheet
Description
1) ELECTRICAL INSTALLATION
1) Distribution board
1.1) MDB (Main Distribution Board) of 15A/ 1-Phase (No.)
2) Light Points.
2.1) Light point fed through PVC insulated conductors of 2 X 2.5mm 2, inside PVC
conduit of 16mm diameter, including junction boxes with cover, insulating screw
cap connectors, all for flush mounting.LIGHTING (No.)
2.2) Extra over light points:(Type Legrand Mosaic or Equivalent complete with boxes,
screw type plates and accessories) SWITCHES
3.1) wall mounted luminaire RZB 56225+056150 with energy saving lamp
3.7) Fluorescent fitting type PHILIPS TMS 012/236 with 2XTLD 36W
3.8) Fluorescent fitting type PHILIPS TMS 012/236 with 1XTLD 36W
4) Socket outlets.
4.1) Socket out lets of flush mounting fed through PVC conductors of 3x2.5mm 2,
inside PVC conduit of 16mm diameter, including junction boxes with cover,
insulating screw cap connectors, all for flush mounting.
(No.)
4.2) Extra Over Socket outlet Points (Type Legrand Mosaic or Equivalent complete
with boxes, screw type plates and accessories)
5)TEL/Data System
5.1) Telecom points fed through 1x(twisted pair category 5E UTP cable ) inside PVC
conduit of 20mm diameter. (No.)
6) TV System
6.1) TV point fed through 75Ohms Co-axial cable suitable for VHF-UHF signal
distribution inside PVC conduit of 20mm diameter including spilitters ,connectors
and terminal type. (No.)
6.2) TV socket outlet for flush mounting (No.)
8.2) Feeder PVC sheathed insulated power cable of 5X4mm 2 inside PVC conduit of
21mm diameter from MDB to SDB-GF. (ML)
8.2) Feeder PVC sheathed insulated power cable of 5X4mm 2 inside PVC conduit of
21mm diameter from MDB to SDB-1F. (ML)