Professional Documents
Culture Documents
Procedure For Bolt Torquing of Thermoplastic and RTR Flange Joint of Force Main Piping
Procedure For Bolt Torquing of Thermoplastic and RTR Flange Joint of Force Main Piping
BI No.: BI-10-00675
TKSA-RMB-0018_rev.01/24.03.2014
BI No.
REPLACE MAINTENANCE BUILDINGS AT RAS TANURA BI-10-00675
TABLE OF CONTENTS
DESCRIPTION PAGE
1. SCOPE --------------------------------------------------------------------------------------------------------3
2. REFERENCES ------------------------------------------------------------------------------------------------3
4. PROCEDURE ------------------------------------------------------------------------------------------------3
5. INSPECTIONS ----------------------------------------------------------------------------------------------4
6. ATTACHMENTS --------------------------------------------------------------------------------------------5
6.2 Torque Value as per size and material to be used ------------------------Annex "B"
1. SCOPE:
This procedure describes the steps to be followed in tightening the bolts during the assembly of
thermoplastic and RTR flat-face flange joints.
2. REFERENCES:
3. TOOLS/EQUIPMENTS:
5. INSPECTION:
6. ATTACHMENTS:
Annex "A"
(SAIC-L-2002, Rev. 07)
BI No.
REPLACE MAINTENANCE BUILDINGS AT RAS TANURA BI-10-00675
Annex "B"
(Torque Values as per size and
materials to be used)
BI No.
REPLACE MAINTENANCE BUILDINGS AT RAS TANURA BI-10-00675
Annex "C"
(IFC Drawing)