Professional Documents
Culture Documents
Catálogo Motores IEC C.G.
Catálogo Motores IEC C.G.
T
Industrial
MPower
otors
Behind
The Drive
Energy Efficient
LT, TEFC, SCR Motors
Frame 63 to 355
UKAS
ISO 9001
LT INDUSTRIAL MOTORS
Automatic Winding Machine, OLMC - Italy Test Plant, BENNING - Germany Trickle Impregnation
LT, TEFC, SCR MOTORS
FRAME 63 TO 355
1
PERFORMANCE DATA,
50Hz
Voltage : 415 V, 50 Hz, 3 Phase AC Rating : Continuous Duty, S1 Combined Variation : ± 10%
Enclosure : Totally Enclosed Fan Insulation Class : ‘F’ Ambient : 45°C
Cooled (TEFC) Voltage Variation : ± 10% Temprature Rise : max.75°C by
Degree of Protection : IP55 Frequency Variation : ± 5% resistance method
P
OUTPUT EFFICIENCY (%) POWER FACTOR DOL STG. NET
O FRAME FL FL FLT POT GD²
WEIGHT
L SIZE RPM AMPS kg-m 3/4 1/2 3/4 1/2 STG. T STG. C %FLT kgM²
kW HP FL FL kg.
E LOAD LOAD LOAD LOAD %FLC %FLC
0.18 0.25 2 SD63 2700 0.50 0.06 64.0 62.0 58.0 0.79 0.68 0.59 300 500 350 0.001 5.6
4 SD63 1330 0.55 0.13 64.0 62.0 58.0 0.79 0.73 0.60 200 400 250 0.003 5.6
6 SD71 900 0.55 0.19 65.0 64.0 60.0 0.68 0.60 0.50 200 400 250 0.004 7.0
8 SD80 670 1.00 0.26 52.0 46.0 36.0 0.50 0.42 0.32 200 400 250 0.011 10
0.25 0.33 2 SD63 2700 0.65 0.09 68.0 67.0 63.0 0.79 0.72 0.60 275 500 325 0.001 5.6
4 SD71 1350 0.73 0.18 68.0 67.0 63.0 0.70 0.64 0.54 225 400 275 0.004 7.0
6 SD71 890 1.20 0.27 60.0 55.0 48.0 0.60 0.50 0.40 180 400 225 0.004 7.0
8 SD/ND80 670 1.10 0.36 52.0 46.0 36.0 0.50 0.42 0.32 170 400 200 0.011 10/17
0.37 0.50 2 SD71 2820 0.95 0.13 71.5 70.0 66.0 0.79 0.75 0.68 275 500 325 0.002 7.0
4 SD71 1400 1.12 0.26 71.5 70.0 66.0 0.65 0.60 0.53 225 500 275 0.004 7.0
6 SD/ND80 910 1.05 0.40 69.0 68.0 66.0 0.71 0.63 0.52 210 400 250 0.011 10/17
8 SD/ND90S 680 1.40 0.53 65.0 64.0 60.0 0.57 0.50 0.40 170 400 220 0.015 13/22
0.55 0.75 2 SD71 2800 1.30 0.19 73.0 72.0 68.0 0.81 0.76 0.71 275 500 300 0.002 7.0
4 SD/ND80 1410 1.45 0.38 73.0 73.0 69.5 0.73 0.67 0.54 200 500 250 0.007 10/17
6 SD/ND80 910 1.55 0.59 69.0 68.0 66.0 0.71 0.63 0.52 200 400 260 0.011 10/17
8 SD/ND90L 680 1.75 0.79 69.0 68.0 64.0 0.63 0.54 0.45 150 400 200 0.021 13/22
0.75 1.00 2 SD/ND80 2820 1.65 0.26 77.0 76.0 74.0 0.81 0.73 0.62 250 600 300 0.003 10/17
4 SD/ND80 1410 1.75 0.52 77.0 76.0 74.0 0.78 0.75 0.64 200 500 250 0.007 10/17
6 SD/ND90S 935 2.00 0.78 73.0 71.0 69.0 0.72 0.65 0.58 200 400 250 0.015 13/22
8 SD/ND100L 700 2.55 1.04 70.0 69.0 64.0 0.58 0.51 0.41 175 400 225 0.030 19/32
1.10 1.50 2* SD/ND80 2820 2.35 0.38 79.0 78.0 76.0 0.82 0.77 0.70 225 600 275 0.004 10/17
2 SD/ND90S 2830 2.30 0.40 77.0 72.0 64.0 0.82 0.76 0.68 250 600 300 0.006 13/22
4 SD/ND90S 1415 2.50 0.76 78.0 76.0 74.0 0.78 0.75 0.64 200 500 250 0.014 13/22
6 SD/ND90L 935 2.85 1.15 76.0 76.0 74.0 0.72 0.66 0.58 200 500 250 0.021 16/25
8 SD/ND100L 700 3.30 1.53 72.5 71.0 68.0 0.63 0.54 0.44 175 400 225 0.034 19/35
1.50 2.00 2 SD/ND90S 2830 3.10 0.52 80.0 79.0 77.0 0.82 0.77 0.70 225 600 275 0.006 13/22
4 SD/ND90L 1415 3.20 1.03 80.0 79.0 77.0 0.81 0.78 0.71 200 500 250 0.019 16/25
6 SD/ND100L 935 3.70 1.56 78.0 78.0 76.0 0.72 0.66 0.58 200 400 250 0.030 19/32
8 SD/ND112M 700 4.00 2.09 77.0 77.0 75.0 0.68 0.60 0.52 190 400 240 0.057 29/45
2.20 3.00 2 SD/ND90L 2830 4.60 0.76 81.0 80.0 78.0 0.82 0.77 0.70 250 600 300 0.008 16/25
4 SD/ND100L 1440 4.50 1.49 82.0 81.0 79.0 0.82 0.78 0.72 200 600 250 0.030 19/32
6 SD/ND112M 935 5.10 2.29 80.0 80.0 78.0 0.75 0.71 0.63 200 500 250 0.048 29/42
8 SD/ND132S 710 5.40 3.02 78.0 78.0 76.0 0.73 0.68 0.61 180 450 230 0.174 42/68
3.00 4.0 2 SD/ND100L 2865 6.00 1.03 83.0 82.0 80.0 0.85 0.81 0.73 250 600 300 0.022 19/32
4 SD/ND100L 1425 6.10 2.05 83.0 82.0 80.0 0.82 0.78 0.72 200 600 250 0.034 19/36
6 SD/ND132S 940 6.30 3.10 84.0 83.0 80.0 0.79 0.75 0.68 200 500 250 0.174 42/68
8 SD/ND132M 710 7.00 4.17 80.0 79.0 77.0 0.74 0.70 0.62 170 500 220 0.214 45/79
3.70 5.00 2 SD/ND100L 2840 7.20 1.25 84.5 84.3 82.0 0.85 0.81 0.73 250 600 300 0.022 19/36
4 SD/ND112M 1430 7.40 2.50 85.0 85.0 83.0 0.82 0.78 0.72 200 600 250 0.052 29/42
6 SD/ND132S 950 7.70 3.79 85.0 84.0 82.0 0.79 0.73 0.63 200 600 250 0.174 42/68
8 SD/ND132M 710 8.40 5.08 83.0 83.0 81.0 0.74 0.70 0.62 180 600 230 0.214 45/79
8 ND160M 710 8.00 5.08 83.0 83.0 81.0 0.74 0.70 0.62 150 500 200 0.460 125
4.00 5.5 2 SD112M 2865 7.50 1.35 83.0 82.0 79.0 0.88 0.84 0.75 250 650 300 0.030 27
4 SD112M 1430 8.50 2.72 85.0 84.0 81.0 0.81 0.76 0.69 200 600 250 0.057 29
6 SD132M 945 8.50 4.12 84.0 83.0 80.0 0.79 0.75 0.68 200 550 250 0.214 53
8 ND160M 710 8.00 5.48 83.0 83.0 81.0 0.74 0.70 0.62 150 500 200 0.460 121
5.50 7.50 2* ND112M 2880 10.00 1.86 86.0 86.0 84.0 0.89 0.85 0.80 250 650 300 0.034 45
2 SD132S 2865 10.50 1.86 86.0 85.0 83.0 0.85 0.82 0.76 200 600 300 0.034 42
2 ND132S 2865 10.50 1.90 84.0 82.0 79.0 0.89 0.84 0.76 250 600 300 0.062 68
4 SD/ND132S 1450 10.10 3.69 86.0 85.0 83.0 0.88 0.85 0.75 225 600 275 0.131 42/68
6* SD/ND132M 950 11.30 5.64 85.0 84.0 82.0 0.80 0.75 0.68 200 600 250 0.214 45/79
6 ND160M 970 11.00 5.52 86.0 86.0 84.0 0.80 0.76 0.68 200 550 250 0.460 125
8 ND160M 710 12.00 7.55 85.0 85.0 83.0 0.74 0.70 0.62 150 500 200 0.460 125
2
PERFORMANCE DATA,
50Hz
3
PERFORMANCE DATA,
50Hz
NOTES : 1. All performance figures are subject to tolerances as per IEC 60034-1
2. FL - Full Load, STG = Starting, C - Current, T - Torque, DOL - Direct on line, S/D - Star/Delta
3. * With class ‘F’ temperature rise. (90° C rise)
4. **These Frames are for Australian Standards AS1359 / AS1360 or South African Standard SABS 948 Part I-1978.
4
PERFORMANCE DATA,
60Hz
5
PERFORMANCE DATA,
60Hz
6
PERFORMANCE DATA,
60Hz
7
DIMENSIONS,
FOOT MOUNTING - B3
AD
AC L
TAPPED HOLE
Y × DEPTH
F HD ED
X
X
ØD HC ØD ØD
ED
H
GD KK
G
AA S BA
HA A E C B E
AB BB
4 HOLES OF ØK
All dimensions in mm.
2 Nos. 1”
ND160L 254 254 108 160 73 308 76 298 15 22 42 110 80 12 37 8 M16×32 275 318 650 376
ND180M 279 241 121 180 84 348 95 286 15.5 22 48 110 80 14 42.5 9 M16×32 295 352 677 418
ND180L 279 279 121 180 84 348 95 323 15.5 22 48 110 80 14 42.5 9 M16×32 295 352 715 418
ND200L 318 305 133 200 66 381 115 356 19 25 55 110 80 16 49 10 M20×40 345 428 805 480
ND225S 356 286 149 225 70 425 102 375 19.5 25 60 140 110 18 53 11 M20×40 375 470 880 534 2 Nos. 1.5”
ND225M 356 311 149 225 70 425 102 375 19.5 25 60 140 110 18 53 11 M20×40 375 470 880 534
ND250S 406 311 168 250 80 483 135 419 24 32 65 140 110 18 58 11 M20×40 405 500 940 598
ND250M 406 349 168 250 80 483 135 419 24 32 65 140 110 18 58 11 M20×40 405 500 940 598
ND280S 457 368 190 280 100 538 167 487 24 35 75 140 110 20 67.5 12 M20×40 430 536 1085 642
ND280M 457 419 190 280 100 538 167 487 24 35 75 140 110 20 67.5 12 M20×40 515 536 1085 642
2 Nos. 2”
ND315S 508 406 216 315 110 597 164 533 28 38 80 170 140 22 71 14 M20×40 510 588 1230 725
ND315M 508 457 216 315 110 597 164 533 28 38 80 170 140 22 71 14 M20×40 510 588 1230 725
ND315L 508 508 216 315 110 610 230 740 28.5 35 90 170 140 25 81 14 M24×50 570 655 1375 755
ND355S 610 500 254 355 110 710 253 745 28.5 40 100 210 160 28 90 16 M24×50 420 672 1513 760
2 Nos. 2.5”
ND355M 610 560 254 355 110 710 253 745 28.5 40 100 210 160 28 90 16 M24×50 560 672 1513 760
ND355L 610 630 254 355 110 710 253 745 28.5 40 100 210 160 28 90 16 M24×50 560 672 1513 760
ND355LX 610 630 254 354.5 110 710 250 880 28.5 40 100 210 160 28 90 16 M24×50 600 720 1570 827
1. In foot mounted SD frames, up to SD132S/M the terminal box is on top and eye bolt is not provided. 2. Eye bolt is suitably located on the motor
body and a second eye bolt is provided as necessary. 3. In frames 200 and above, an auxiliary terminal box is provided for space heater and
thermistors, when specified. 4. Please call for certified drawings for specific contractual details. 5. 'HD' indicates height up to eyebolt or terminal box,
as applicable and whichever is higher. 6. Dimension 'X' is 2.5mm in frame SD63 and 71. In all other frames, it is zero i.e. the keyway is open. 7. One
cable entry shall be for DOL starting and two for star /delta starting and multispeed motors. 8. Compression type cable glands can be fitted when
specified. 9. KK is the conduit entry diameter. 10. 2 pole motors in frame 225 and above have smaller dia. shaft, as per table on page 10.
8
DIMENSIONS, FLANGE
MOUNTING - B5
AD L
45° R LB
TAPPED HOLE
Y × DEPTH HB
X ED ED X
F
ØN
SPIGOT ØAC
ØD
ØD ØD
KK
G GD BS CONDUIT
4 HOLES, ØS
ØP DRILLED EQUALLY E E
SPACED ON
ØM CIRCLE T LA
2Nos.
ND160MD 660 213
-1”
42 110 80 12 37 8 275 318 210
ND160LD 705 235
300 250 350 0 19 5 18 M16×32
ND180MD 746 241.5
48 110 80 14 42.5 9 295 352 239
ND180LD 784 260.5
ND200LD 350 300 400 0 19 5 15 55 110 80 16 49 10 M20×40 345 428 873 285.5 278
2Nos. 1.5”
ND225SD
400 350 450 0 19 5 19 60 140 110 18 53 11 M20×40 375 470 955 304.5 309
ND225MD
ND250SD
65 140 110 18 58 11 405 500 1020 342.5 344
ND250MD
500 450 550 0 19 5 19 M20×40
ND280SD 430
75 140 110 20 67.5 12 536 1170 444.5 361
ND280MD 515
2Nos. 2”
ND315SD
80 170 140 22 71 14 M20×40 510 588 1340 444.5 406
ND315MD 600 550 660 0 24 6 25
ND315LD 90 170 140 25 81 14 M24×50 570 655 1490 530.5 440
2Nos.
ND355S/M/L 740 680 800 0 24 6 28 100 210 160 28 90 16 M24×50 600 670 1513 570 760
2.5”
ND355LX 740 680 800 0 24 6 28 100 210 160 28 90 16 M24×50 600 720 1570 591 827
1) In frames 200 and above, an auxiliary terminal box is provided for space heater and thermistors, when specified. 2) Please call for certified drawings
for tolerances and specific contractual details. 3) In flange mounted SD frames up to 112M, eyebolt is not provided, hence dimension HB is "Not
Applicable". 4) Dimension 'X' is 2.5mm in frame SD63 and 71. In all other frames, it is zero i.e. the keyway is open. 5) KK is the conduit entry
diameter. 6) Frames 200 and above to have 8 equally spaced holes on the flange instead of 4 shown in Drg. 7) Second eyebolt is provided for motors
in frame 160 and above. 8) 2 Earthing terminals of M8 size are provided on Frame 160 upto 250 and M12 size for 280/315. 9) Please refer to page 10
for shaft dimensions of in 2 pole, 225 and higher frame motors.
9
DIMENSIONS,
FACE MOUNTING - B14B
L
225 and higher frames, 2 pole Frame ØD E ED F G GD S M L
motors running at 3000 syn. rpm ND 225 55.00 110.00 80.00 16.0 49.0 10.0 850 850 -
have smaller shafts as shown ND 250 60.00 140.00 110.0 18.0 53.0 11.0 940 940 -
here ND 280 65.00 140.00 110.0 18.0 58.0 11.0 1085 1085 -
ND315 65.00 140.00 110.0 18.0 58.0 11.0 1200 1200 -
ND 315 70.00 140.00 110.0 20.0 62.50 12.0 - - 1345
ND 355* 75.00 170.00 140.00 20.0 67.50 12.0 - - 1530
*Yx Depth = M20×40. All dimensions in mm.
BEARING REFERENCES, B3
FRAME POLARITY DE BEARING ODE BEARING FRAME POLARITY DE BEARING ODE BEARING
SD63 2/4 6201ZZ 6201ZZ ND225 S/M 2/4/6/8 6313 - 2RS 6313 - 2RS
SD71 2/4 6203ZZ 6203ZZ ND250 S/M 2 6314 - C3 6314 - C3
SD/ND80 2/4/6/8 6204ZZ 6204ZZ ND250 S/M 4/6/8 6314 - C3 6314 - C3
SD/ND90 S/L 2/4/6/8 6205ZZ 6205ZZ ND280 S/M 2 6314 - C3 6314 - C3
SD/ND100L 2/4/6/8 6206ZZ 6206ZZ/6205ZZ ND280 S/M 4/6/8 6318 - C3 6318 - C3
SD/ND112M 2/4/6/8 6306ZZ 6205ZZ 2 6315 - C3 6315 - C3
SD/ND132 S/M 2/4/6/8 6308ZZ 6208ZZ/6305ZZ ND315 S/M/L
4/6/8 6319 - C3 6319 - C3
ND160 M/L 2/4/6/8 6309ZZ 6309ZZ
ND180 M/L 2/4/6/8 6310ZZ 6310ZZ ND355 L 2 6316 - C3 6316 - C3
ND200L 2/4/6/8 6312ZZ 6312ZZ 4/6/8 6321 - C3 6321 - C3
SHIPPING SPECIFICATIONS
TEFC, SCR, FOOTED MOUNTED MOTORS
FRAME TYPE OF NET WT. GROSS WT. LENGTH BREADTH HEIGHT VOLUME
SIZE PACKING (kgs) (kgs) (mm) (mm) (mm) (cu.m.)
ALUMINIUM FRAME MOTORS TERMINAL BOX ON TOP
SD63 CARTON 5.6 7.5 295 190 230 0.0130
SD71 CARTON 7.0 9.0 295 190 230 0.0130
SD80 CARTON 10.0 13.0 340 230 250 0.0190
SD90S CARTON 13.0 17.0 400 235 305 0.0290
SD90L CARTON 16.0 20.0 400 235 305 0.0290
SD100L CARTON 19.0 24.0 430 265 330 0.0380
SD112M CARTON 29.0 32.0 450 370 325 0.0542
SD132S WOODEN 46.0 56.0 620 395 420 0.1030
SD132M WOODEN 53.0 63.0 620 395 420 0.1030
CAST IRON FRAME MOTORS TERMINAL BOX ON TOP
ND160M WOODEN 120 184 826 500 615 0.0254
ND160L WOODEN 146 206 826 500 615 0.0254
ND180M WOODEN 174 246 930 525 655 0.0320
ND180L WOODEN 205 276 930 525 655 0.0320
ND200L WOODEN 270 368 1275 725 790 0.0730
ND225S WOODEN 350 464 1275 725 790 0.0730
ND225M WOODEN 380 494 1275 725 790 0.0730
ND250S WOODEN 460 601 1530 785 890 1.0600
ND250M WOODEN 465 641 1530 785 890 1.0600
ND280S WOODEN 620 761 1350 785 890 1.0600
ND280M WOODEN 700 841 1350 785 890 1.0600
ND315S WOODEN 1056 1306 1730 1052 1065 1.9400
ND315M WOODEN 1130 1380 1730 1052 1065 1.9400
ND315L WOODEN 1200 1480 1830 1102 1115 2.2500
ND355L WOODEN 2020 2425 1900 1375 1325 3.4600
ND355LX WOODEN 2150 2555 2000 1375 1325 3.6437
10
SHIPPING
SPECIFICATIONS
TEFC, SCR, FOOTED MOUNTED MOTORS (Contd.)
TYPE OF NET WT. GROSS WT. LENGTH BREADTH HEIGHT VOLUME
FRAME PACKING (Kgs) (Kgs) (mm) (mm) (mm) (cu.m.)
CAST IRON FRAME MOTORS, TERMINAL BOX ON SIDE
ND80 CARTON 17 21 360 295 245 0.0260
ND90S CARTON 22 26 410 310 270 0.0340
ND90L CARTON 25 29 410 310 270 0.0340
ND100L CARTON 32 37 465 345 290 0.0470
ND100L CARTON 35 40 465 345 290 0.0470
ND112M CARTON 45 51 495 370 320 0.0590
WOODEN 45 62 525 410 355 0.0760
ND132S CARTON 68 76 600 430 380 0.0980
WOODEN 68 92 600 410 390 0.0954
ND132M CARTON 79 88 600 430 380 0.0980
WOODEN 79 103 600 410 390 0.0954
ND160M WOODEN 120 179 826 615 535 0.2700
ND160L WOODEN 146 204 826 615 535 0.2700
ND180M WOODEN 170 250 935 715 570 0.3800
ND180L WOODEN 205 280 935 715 570 0.3800
ND200L WOODEN 270 366 1025 825 700 0.5900
ND225S WOODEN 350 462 1025 825 700 0.5900
ND225M WOODEN 380 492 1025 825 700 0.5900
ND250S WOODEN 460 586 1150 845 710 0.6900
ND250M WOODEN 465 628 1150 845 710 0.6900
ND280S WOODEN 620 766 1500 1067 850 1.3600
ND280M WOODEN 700 846 1500 1067 850 1.3600
ND315S WOODEN 1056 1319 1730 1170 925 1.8800
ND315M WOODEN 1130 1393 1730 1170 925 1.8800
ND315L WOODEN 1200 1475 1730 1170 925 1.8800
ND355L WOODEN 2020 2300 1730 1170 925 1.8800
ND355LX WOODEN 2150 2430 1830 1170 925 1.9800
The standard packing is in carton The carton packing is for full mounting motors would be similar to
when available, alternatively it is container shipment. those of foot mounting motors for
wooden. The shipping specifications for face frames up to 132.
12
The Widest Range of Motors,
AC Generators & Pumps
■ From 0.18kW to 400kW, SCR and SR to ■ For 110 to 660V, 50/60Hz supply.
IEC in frames 63 to 355L and to NEMA ■ Standard TEFC, SCR motors conforming
frames 143 to 405. to EFF2, efficiency levels as per CEMEP
■ DP, TEFC, TE, Flame proof (Type 'd'), Agreement with EU for Energy Efficient
Increased Safety (Type 'e'), Motors, optionally with EFF1
Non-sparking (Type 'N'), Pressurized (High Efficiencies) on request.
(Type 'p') enclosures etc. ■ NEMA Motors certified by CSA, Canada to
■ Flame proof motors are certified by EPACT for Energy Efficient Motors, with
BASEEFA and increased safety motors to CC No. CC047A by DoE, CSA.
IEC 60079-0 Edition 3.1:2000 - 06 and ■ With c-CSA-us mark for Canada and USA
IEC 60079-7 Edition 3.2:2001 - 11 by CSA and with CE mark for Europe.
Canada ■ S1 to S9 duty cycles for all applications.
■ Upto 1500HP, SCR and SR. ■ For 400 to 690 volts, 50/60 Hz supply.
■ Frames upto 560, 2 pole to 12 poles. ■ S1 to S8 duty cycles for all applications.
■ TEFC, DP, Type 'd', Type 'e', Type 'N', ■ Standard Re-Rolling Mill Duty motors and
Type 'p' enclosures. Special Dual Speed Induction
■ Vertical and horizontal mounting. Generators for Windmill.
AC Generators
For Brushless
Pumps
13
Expressions
of Power
Crompton Greaves Limited, established in Power Systems
• Transformers
1937, has witnessed over six decades of • Switchgear
Digital
unparalleled growth to have current sales of • Informatics • Engineering Projects
over Rs. 18 Billion (US $ 400 Million approx.). • Telecom 40%