Professional Documents
Culture Documents
Mill Probe Ready Installation 2000 2015
Mill Probe Ready Installation 2000 2015
Overview
The probe kit comes with the necessary wires and cables to install a universal probe-ready option to a Haas
mill. This kit is used on machines with or without the 8M-relay option. However it is installed differently if the
mill has the option. The following instructions describe how to install the mill probe kit regardless of options.
Transformer
Power Supply PCB
90B
P3 115VAC
1
2.0"
2
Probe 6 1.0"
P.S. 5
NC NO
COM
M22 1 <White> Skip Signal RTN (Skip RTN)
I/OPCB 34 2 <Black>Skip Signal RTN (Skip RTN)
12 3 <Black>Skip N/O (ISO #7)
1070 4 <Red>Skip N/C (M17 #13)
P22 SKIP 5 <Black> PROBE +24VDC (+24 UDC)
6 <Black> PROBE 24V RTN (CD RTN)
P3 115VAC
2
Transformer
2.0" <Orange>Skip N/O
Probe <White/Orange> Skip RTN
P.S. <Black> Skip N/C
7 6 5 4 3 2 1
1.0" <White/Black> Skip RTN
C OM
NO
NC
<White/Brown> EN RTN
I/OPCB M-Code 1 <White> Skip Signal RTN (Skip RTN) <Brown> Probe EN
M22 2 <Black>Skip Signal RTN (Skip RTN)
Relay 12 <Yellow> 24V
Board 5 6 3 <Black>Skip N/O (ISO #7)
1070 4 <Red>Skip N/C (M17 #13) <White/Yellow> 24V RTN
34 5 <Black> PROBE +24VDC (+24 UDC)
P22 SKIP
6 <Black> PROBE 24V RTN (CD RTN)