Professional Documents
Culture Documents
Sap TM 9.5 SPS 12 - Rin
Sap TM 9.5 SPS 12 - Rin
SAP Note
Symptom
This note contains information about installing the add-ons SAPTM 160 and SAPTMUI 160 using transaction SAINT or
SOFTWARE UPDATE MANAGER(SUM).
The note also contains information about Delta Upgrade to SAP TM 9.5.
Other Terms
SAINT, add-on, installation, CD, SAP Transportation Management 9.5
SAPTM 160 and SAPTMUI 160 belong to the product version SAP Transportation Management 9.5 (SAP TM 9.5).
Solution
Obtain the current version of this note before you start the installation process.
Contents
1. Change history
b) Installation of SAP TM 9.5 by including SAPTM 160/SAPTMUI 160 in a Delta Upgrade to SAP NETWEAVER 7.5
using SOFTWARE UPDATE MANAGER(SUM)
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 1/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
9. Language support
10. Password
1. Change history
Required release:
SAP NetWeaver 7.5
You may not install the following components or try to install SAPTM in a system where these components are installed:
BBPCRM, SAP_APPL, SCM, SRM_PLUS. See details in note 1951846 - SAP TM Deployment Options .
Import the latest R3trans and tp. Ensure that you have imported the latest kernel version into your system. If a newer
version is available on SAP ServiceMarketplace, import the most recent kernel.
Required software component releases and Support Packages for installing SAPTM 160:
SAP_BASIS 750
EA-IPPE 618
SCM_BASIS 714
SAP_BS_FND 748
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 2/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
MDG_FND 749
SAP_AP 750
SAP_UI 750
SCMBPLUS 714
WEBCUIF 748
SAP_BASIS SAPK-75009INSAPBASIS
EA-IPPE SAPK-61802INEAIPPE
SAP_AP SAPK-75006INSAPAP
SAP_UI SAPK-75009INSAPUI
SCM_BASIS SAPK-71408INSCMBASIS
SAP_BS_FND SAPK-74808INSAPBSFND
MDG_FND SAPK-74909INMDGFND
SCMBPLUS SAPK-71407INSCMBPLUS
WEBCUIF SAPK-74808INWEBCUIF
Please also download the ACP SAPTM=====160 from Service market place along the installation package.
If you have not yet installed these Component Support Packages, you can include them in the SAPTM 160
installation.
Required Software component releases and support packages for installing SAPTMUI 160
SAP_BASIS 750
SAP_UI 750
SAP_BASIS SAPK-75009INSAPBASIS
SAP_UI SAPK-75009INSAPUI
If you have not yet installed these Component Support Packages, you can include them in the SAPTMUI 160
installation.
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 3/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
The material number of the CD which contains the Installation packages for SAPTM 160 / SAPTMUI 160 is:
51052641
Log on as user:
Switch to the directory <DIR_EPS_ROOT> of your SAP system(usually /usr/sap/trans/EPS). The directory
<DIR_EPS_ROOT> is also displayed under DIR_EPS_ROOT after you execute the report RSPFPAR.
Unpack the SAR archive K-160AGINSAPTM.SAR present in the subfolder DATA on the CD using the
following statement:
The PAT file for SAPTM 160 I720020751259_0115914.PAT should now be in the directory <DIR_EPS_ROOT>/in.
Use similar commands to Unpack the SAR archive K-160AGINSAPTMUI.SAR. The pat
file:I720020751259_0115800.PAT should now be in the directory <DIR_EPS_ROOT>/in.
The DVD containing the delta upgrade packages of the re-use components has the material number:51050302. It
can be downloaded from the download page for SAP TM 9.5
There is a separate DVD for the Optimizer content. The material number of the DVD is 51052271. It can be
downloaded from the download page for SAP TM 9.5
If your system does not have the pre-requisite software components(see Chapter 2.) installed; then, you can install
them in the same queue as SAPTM 160/SAPTMUI 160. But, before defining the queue, also kindly refer to the
Installation Notes of the above mentioned components.
User to be used.
Log onto your system in client 000 as a user with SAP_ALL authorization. Do NOT use the SAP* or DDIC users.
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 4/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
Installation of SAPTM 160/SAPTMUI 160 by including SAPTM 9.5 in a Delta Upgrade with Software Update Manager.
The general procedure for the upgrade can be found in the Upgrade Master guide for SAP Netweaver 7.5 in Service
Market place.
To know about the supported "Upgrade Paths", kindly refer to the Release Strategy Note: 1678998
The SAR file: K-160AGINSAPTM.SAR is also relevant for a Delta Upgrade to TM 9.5
Add-on Supplement
When you upgrade an SAP release to SAP NETWEAVER 7.5, the system automatically recognizes that an ABAP add-on
is installed and it requests an additional CD or an upgrade package for the add-on. As a result, the ABAP add-on is also
upgraded to the corresponding release during the standard upgrade.
CAUTION:
If you upgrade an SAP system with the add-on: SAPTM to SAP Netweaver 7.5 without importing the data contained on the
upgrade CD with the material number 51051200 (IS_SELECT phase), the ABAP add-on SAPTM no longer works after the
upgrade. Since the status of the system is inconsistent, SAP can no longer accept any liability. So, kindly ensure that any
upgrade/update of your TM system is carried out using a stack.xml which includes SAP TM in the target.
In the initial release of your system, use the latest version of R3trans, tp, Kernel and SPAM.
If you have downloaded the add-on upgrade package directly from SAP Service Marketplace, unpack it in the directory
<DIR_EPS_ROOT>/in. The file should be in the <DIR_EPS_ROOT>/in directory.
Attention
Before starting the upgrade, make sure that the scheduled batch job for program
/SCMTMS/PROCESS_TRIGGER_BGD runs at least once after all business users have logged off from the system
with the lower release. Alternatively, you can execute the program once manually in the system with the lower
release after all business users have logged off
When using Dangerous Goods, please refer to SAP Note 2550611 - DG Correction Report
(/sap/support/notes/2550611) before starting the upgrade
Phase BIND_PATCH:
This displays which Support Packages are located in the <DIR_EPS_ROOT>/in directory and can be included in the
upgrade. Make sure that you include atleast the support packages mentioned in Chapter: 2
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 5/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
Please also read note 2316985 - Installation of SCM Optimizer Version 13.0 (/sap/support/notes/2316985) when
upgrading the SCM Optimizer to version 13.0.
Please refer to the the following HotNews which is relevant while upgrading to EWM/EM/TM 9.5.
2096457 - Errors in ACT_UPG during SPDD: customer version of table can not be accessed (/sap/support/notes/2096457)
Important Correction to XPRA when upgrading to SAP TM 9.5 Support Package 02 or lower
Support Package 00 or 01
It is highly recommended to implement SAP Note 2629000 during the upgrade, after the import of SAPTM
160 has been finished, and before the XPRA phase is started. Without the correction of this SAP Note it can
happen that data of freight and forwarding order management is not correctly converted. This, finally results in
data inconsistency. Check SAP Note 2629000 (/sap/support/notes/2629000) for further details.
The problem does not occur when upgrading to SAP TM 9.5 Support Package 02 or higher.
Support Package 02 or 01 or 00
It is highly recommended to implement SAP Note 2665856 during the upgrade, after the import of SAPTM
160 has been finished, and before the XPRA phase is started. Without the correction of this SAP Note it can
happen, that far too much memory gets allocated during data conversion of XPRA
/SCMTMS/XPRA_150_BLOCKS. This results in exceptions, what interrupts the upgrade, or the application
servers start swapping, what leads to very bad runtime. Check SAP Note 2665856 (/sap/support/notes/2665856)
for further details.
The problem does not occur when upgrading to SAP TM 9.5 Support Package 03 or higher.
/BCV/MAIN
/BCV/MAIN_1
FND_SOA_REUSE_1
SCM_EHS_DG_CI_1
SCM_SAPTM_SCMB_FND
SCM_SCMB_TM_FND1
SCM_SCMB_TR_NETWORK
To enable SSO for local BSP calls using SAP GUI HTML Control, please refer the Note: 612670
Check if all services in the following SICF paths are activated (with transaction SICF):
/default_host/sap/bc/ui5_ui5/scmtms/gantt_proxy
/default_host/sap/bc/bsp/gntlb
/default_host/sap/bc/bsp/scmtms
/default_host/sap/bc/bsp/tmui
/default_host/sap/bc/apc/sap/fpm_apc
/default_host/sap/public/bc/ui5_ui5/ILMRWC
Please make sure that the active model is created (IMG-Activity: SAP Customizing Implementation Guide -> SAP
Transportation Management -> Transportation Management -> Master Data -> Create Active Version and Model.)
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 6/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
The parameter abap/shared_objects_size_MB should be changed from default value = 20MB to new = 250 MB in
the default profile.
Please check if all WebDynpro Services in the following node are activated (or else activate them): TA SICF
Default host -> sap -> bc -> webdynpro -> scmtms
In order to leverage the full functionality of Visual Business please make sure that all end users have installed
version VB 2.1 on their devices. More information on the installation of Visual Business 2.1 can be found in the
help-portal: http://help.sap.com/visualbusiness21 (http://help.sap.com/visualbusiness21).
Delivery Customizing:
Delivery Customizing is imported into client 000 and may have to be copied to other clients. Please notice that
copying customizing from client 000 into a productive client may result in data loss if you have changed already
existing delivery customizing. In case you need to copy delivery customizing into a productive client please use
transaction SCU0 to copy only required entries selectively (you may reduce the scope of the comparison to
application area Transportation Management and SAP Business Partner which carry most important updates). For
more information, see Note 337623.
Support Packages:
After installation, install the available Support Packages (SPs) for SAPTM 160/SAPTMUI 160 in your system.
Download all available Support Packages from the SAP Software Center at http://service.sap.com/patches and
install them using transaction SPAM. Pay attention to any specific points made in the relevant Support Package
note.
Generation errors:
There are no generation errors as regards to either SAPTM 160 or SAPTMUI 160
Batch Jobs
after the installation is completed several periodic tasks have to be setup. This is required in order to assure a
stable and fully functional operability. Follow the steps described in chapter "4.5 Periodic Tasks" in the Application
Operations Guide for SAP TM 9.5 which can be downloaded from this
page:https://service.sap.com/~form/sapnet_SHORTKEY=01200252310000106954&_SCENARIO=01100035870000000202&
(https://service.sap.com/~form/sapnet?
_SHORTKEY=01200252310000106954&_SCENARIO=01100035870000000202&)
Read the referenced notes and especially the latest version of note 2519997 (/sap/support/notes/2519997) SAP TM 9.5-
Collection of SAP Notes recommended to be implemented.
After an upgrade to SAP TM 9.5 SP 01 or lower, it is recommended to implement SAP Note 2654211
(/sap/support/notes/2654211). Without this correction you might face very high database load and bad system
performance.
9. Language support
Arabic
Czech
Danish
German
English
Spanish
Finnish
French
Hebrew
Hungarian
Italian
Japanese
Korean
Dutch
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 7/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
Polish
Portuguese
Russian
Swedish
Turkish
Chinese trad.
Chinese
All language-dependent parts of SAPTM 160/SAPTMUI 160 are contained in the installation package of the add-on. If the
relevant default language is in the system when you import SAPTM 160/SAPTMUI 160, the language part of the add-on is
imported automatically. You do not have to import a language transport separately.
If you import a new standard language into your system after you install SAPTM 160/SAPTMUI 160, you must manually
ensure that the corresponding language-dependent part of the add-on is imported. For more information, see Note
195442.
10. Password
If the transaction SAINT is used to install the add-on: SAPTM 160, the system prompts you to enter a password. This
password is: FCD7A1734F
If the transaction SAINT is used to install the add-on: SAPTMUI 160, the system prompts you to enter a password. This
password is: FCD7D41A4F
During the installation of SP07 (SAPK-16007INSAPTM) ,the below generation errors may occur for several programs,if
SAP_BS_FND level is below SAPK-74816INSAPBSFND
OR
None so far.
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 8/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
Manual Activities
Software Components
Software Component And subsequent
SAPTM
SAPTM
SAPTM
SAPTM
SAPTM
SAPTM
SAPTM
SAPTM X
2665856 XPRAs are allocating too much memory during system upgrade (/sap/support/notes/2665856)
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 9/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
2160716 Additional steps after having upgraded SAP TM to a new release (/sap/support/notes/2160716 )
2910642 Updated maintenance timelines for SAP Transportation Management Business Suite Releases
(/sap/support/notes/2910642 )
2770945 Exception "Snapshot too old" when running migration program /SCMTMS/MIGR_160_TOR_NODES
(/sap/support/notes/2770945 )
2695987 After upgrade to SAP TM 9.5 SP01 or SP02: Exceptions and failing XI messages because of address or one-
time-address issues (/sap/support/notes/2695987 )
2693842 XPRA: Sub node packaging is not working correctly cross client (/sap/support/notes/2693842 )
2169544 Mass-Recalculation of the Document Lifecycle Status for Forwarding Orders and Transportation Requirements
(/sap/support/notes/2169544 )
2665856 XPRAs are allocating too much memory during system upgrade (/sap/support/notes/2665856 )
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 10/11
4/30/23, 8:41 AM 2512482 - Installation/Delta Upgrade note for SAP TM 9.5
https://userapps.support.sap.com/sap/support/sfm/notes/print/0002512482?language=E&token=2439C48D296A39BC77BF6D2771D31161 11/11