Professional Documents
Culture Documents
LS48V100Ah Module Specification
LS48V100Ah Module Specification
LS48V100Ah
Product Specification
1
Menu
1 Overview.................................................................................................................................. 3
2 Important safety instructions ........................................................................................... 3
3 Technical Indicators............................................................................................................ 5
4 Battery Module Appearance and Assembly..................................................................6
5 Battery Pack Performance Inspection and Testing.....................................................8
6 Marking, packaging and transportation .......................................................................16
7 Storage and Others ............................................................................................................ 16
Control by
3.4 Charging Cut-off Voltage 3.65V individual
voltage
Control by
3.5 Discharging Cut-off Voltage 2.0V individual
voltage
Charging 0~45℃
3.13 Operating
Temperature Discharging -20~60℃
1 year -20℃~25℃
Storage
3.14
Temperature 3 months -20℃~45℃
The sampling harness has a total of 4 interfaces, the length of the harness out of the module is
450mm, and the interface is defined as follows:
Unless otherwise specified, the environmental conditions for all tests are as follows:
Temperature: 25 ± 2 ℃ ; Relative Humidity: ≤ 90%; Atmospheric Pressure: 86-106 KPa. Room
temperature, as mentioned herein, refers to 25°C±2℃。
5.1.2 Measuring Instrument Requirements
Voltage measuring device: not less than 0.5 grade
Current measuring device: not less than 0.5 grade
Temperature measuring device:±0.5℃
Time measuring device:±0.1%
Dimension measuring device:±0.1%
Mass measuring device:±0.1%
5.1.3 Initial Charging
5.2 Performance
6.2 Packaging
The products are packed in cardboard boxes with product certificates, packing lists, and product
description information.
6.3 Transportation
Packing boxes containing products should be loaded, unloaded and transported in accordance
with GB/T191. It should be handled gently and should not be thrown. During transportation, it
should be prevented from violent vibration, impact or extrusion, and should not be exposed to
sunshine or rain, and it is strictly prohibited to be mixed with flammable goods and active
chemicals.
7.2 Others
Any matter not referred to in this Prospectus shall be subject to negotiation between the
parties.