Professional Documents
Culture Documents
EN - Bluetooth Ampli-Summary
EN - Bluetooth Ampli-Summary
EN - Bluetooth Ampli-Summary
Ampli summary
1/3
Amplifier schematic
2/3
Functional overview
The circuit consists of a Bluetooth reception module that delivers the audio signal
received via Bluetooth as stereo outputs on the 2 channels A_DR (right) and A_GA
(left), an amplifier stage based on OPAmp and a power stage based on transistors.
To simplify the circuit, the amplifier is a single channel. The 2 audio channels A_DR
and A_GA are added to the amplifier input through link capacitors. A voltage
divider is used to adapt the audio output of the Bluetooth module to the input of
the amplifier.
The amplifier has a gain of about 10 on the realized circuit. It is possible to modify
this gain according to the desired application by changing the resistor R3.
The NE5534 amplifier cannot provide enough power for the loudspeaker. The
transistor-based power stage allows this limit of the NE5534 amplifier to be
overcome.
3/3