Professional Documents
Culture Documents
LA Ravi Sir NC 2
LA Ravi Sir NC 2
of assessment: 1 sep
Name of the NG
0.026 mm
7
trtrffiffiffi +0.004 mm
?9&
r0.004@
14. 0.046mm
1
+0.004@0.026
17
Ps
Signature, Date & Name Signature, Date & Name
Signature, Date &
of of Lead
of CAB
p" s.
cEo
Form72
Permanent Location:
Disci line: Mechan *Test Method *Measurement Assessment
or Products Component, Range of
parameter or Specification Testing/ Limits Uncertainty Technique
tested expressed as used by
characteristic tested/ against which of detection
tests are (r) at observed Assessor(s)
Specific Test Oest Witness ) Dbcument
Performed/ Tests or performed Value review /lnteMiewing / File
type of tests and/or the Review (Record Review)
performed techniques/
equipment used
1. Ferrous & Non-Ferrous Charpy Impact Test
Iso 148 (part 1): 2Jto300J 1.s63 J @78.7 I
Materials & AlloYs 2016
2. Welds & Welded Test Hardness Test on arc ISO 9015 (part l) HV5
Specimen welded joints 2013 ww
3 Welds & Welded Test Hardness Test on arc ISO 9015 (part 1): HVIO
6frf:wt!#
Specimen welded joints 2013 *tffiffvtq
4.
wtrd{&r,ryp1484.tr#' W#,.W 'ffi.rffi ru
Spgcime,
16 Specimen size of
(Transverse +12.35 mm
Welds & Welded Test Quantative Up to
,Longitudinal, Tensile, W28 (IACS):2012
Specimen 300mm
Bend, Macro test piece.
Position ofV notch)
17 Welds & Welded Test Fracture Test W28 (IACS):2012 Qualitative
Specimen
Welds & Welded Test Bend Test (Welds in ISO 5173: 2023 Qualitative @
SPecimen Metallic Materials)
r9. Welds & Welded Test Fracture Test (Welds ln ISO 9017: 2017 Qualitative @
SPecimen metallic materials)
to
20. assessor to check
that we have
Qualitative
Welds & Welded Test Quality Levels for ISO 5817:2023 @ applied in ISO
imperfections :Qualitative test
Specimen method instead of
IS
Requested to
21 assessor to check
tliat we have
Qualifrcation testing of BS EN ISO 9606
Welds & Welded Test Qualitative @ applied in ISO
welders (fusion welding) (part - 1): 2017
Specimen method instead of
IS
23 Welding Procedure
Test(Arc & gas Welding ISO 15614 (pat1-
Welds & Welded Test of steel and Arc welding Qualitative @
1):2017
Specimen ofnickel & nickel
alloys)
24. ts 2629 Cl. 6.4:
Adhesion Test Qualitative
Zinc coated lron & steel article 1 985
26.
(part 2) +12.35 micron
lS 73 18
Al & Al AlloY Welded Test
1974
CouPon
28
ffW Ps:ztffp&-r& ifr
NM
Wffi @
29.
Wffi wwii @
30. 'ffffi\WWffi, ,W @
31
ww,$%
{iw
+12.35 micron
32. Wffi
,W 'ffiffiffiffi
33 Yffi:ffi Wffi @
/,
W +12.35 micron
38 0.57',mm@ withdrawn
Ferrous Materials AlloYs and Lay tength of WireroPe 5 mmrfo900mm
70.!.l2.mm
Products
39. 0.57 mm@
Lay Length of WireroPe IS 1835:1976 5 mm to 900 mm
Steel Wire RoPe 70.112 mm
40 0.57 mm@70.112
Lay Length of WireroPe IS 6594: 2001 5 mm to 900 mm
Steel Wire RoPe mm
48. Ferrous Materials AlloYs and Proof Load &Breaking IS 1608 part -l Qualitative :Upto
@
Products Load Test 2022 1000 kN
Wffi
Load Test
,W ffi *W*luffiHm@
58. Ferrous Materials AlloYs and Drift Expanding test for Qualitative ::Upto
1S 2335: 2005
Tube & Socket I5ONB
Products
.l
63 ,ffi
Qualitative
64 :Qualitative :using
UTM in
compression mode
Ferrous Materials Alloys and Bend Test IS 1599 ::2019 @
and Mandrels
Products
Dia(l0,12,16,20,2
5,30,32.36.40.44.4
8,50,60,75,84)
W
i#,#ffi up,zs
Dia(10,12,16,20,2
5,30,32.36.40.44.4
8.50,60,75,84)
IS 1500 ( part 1) 70 HBW to 650 6.35 HBW @ 388
56 Ferrous Materials AlloYs and Brineli Hardness
2019 HBW HBW
Products Test(Load l0/3000kgf)
ASTM A 370:: 70 HBW to 650 6.30 HBW @ 392
67 Ferrous Materials AlloYs and Brinell Hardness
2022 HBW HBW
Products Test(Load 10/3000 kgf)
Qualitative :UPto
Ferrous Materials AlloYs and Flattening ASTM 4370: 2022 @
45ONB
Products
69 Qualitative ::UPto
Ferrous Materials Alloys and Flattening lS 2328: 2005 NB
450
Products
70
7',|
xhffi wiffi W
72.
ffi W W W
73
W
74. W{ffi
75 ferrous & Non-Ferrous
Materials & AlloYs of Impact test charPY &
ASTM E 23 2016 2Jto300J t.s6t @78.7 t Withdrawn
Tube/wire/squarebar/Hexagon Izod irnpact test (V-
albar/Angle/channel, ,weldingPl Notch & U- Notch)
ound
B,87!?:L;:(ffiirti%,i
2 J to 3OQ,iiJ 1.56t @78;7 J withdrawn
l:912
85.
ffiffir*ffiffiLry$ffiffi "gtffiffiv,e w
{&
*,M9,
86.
ffiffiffiffitrfrfr
W&
W t12.35 micron
87
88.
89
+12.35 micron
Uplo$O$ffi*
I
,ffi
Wffi
91
W YW +12.35 micron
isa{si
D6#iri;iiit
ffffi,*
93.
1rr/ffiliffiiffi
94. Ferrous Materials AlloYs and Tensile (YS, TS, IS 1608: 2022 0.5 kN to 1000 kN 2%@480lvlPa
Products Breaking Load Test)
95 Ferrous Materials AlloYs and Tensile (YS, TS, ASTM A 370 2022 0.5 kN to 1000 kN 1.9%@540MPa
I Products Breaking Load Test)
IS 2121(part 1)
96. Ferrous Materials AlloYs and Visual Examination Qualitative
I 981
Products
Qualitative ::LaY
97 Length: 5mm to
Ferrous Materials AlloYs and Lay Length and LaY IS 6594:: 2018 900mm/
Products Ratio
Ratio:2 to 28
Qualitative ::LaY
98 Lenth:5mm to
Ferrous \'laterials AlloYs and Lay Length and LaY IS 1835: 1976
Ratio 900mm/ LaY
Products
Ratio: 2 to 28
Qualitative :LaY
99 length :5mm to withdrawn
Lay Length and LaY IS 1367(part 5):
Fenous Materials AlloYs and 900mm / LaY
Ratio 2018
Products
Ratio: 2 to 28
00. lS 2121(pat13):
1 Ferrous Materials AlloYs and Visual Examination Qualitative
1992
Products
IS 2121( part )
01 Ferrous Materials AlloYs and Visual Examination Qualitative
1991
Products
{#tA
ffi
104.
ffi#iirwffi
we*
ffiffi +12.35 micron
105
106. IS 7318(part 1)
Qualitative
Ferrous welded test couPons 191 4
Quantative:UP *3.593g
107 to10000g, UP to
High strength deformed steel Mass per Meter, IS 1786:2008 *120tl
bars and wires 3000mm
8mm to3Omm
113.
W W
114. IS 1367 (pat16) Qualitative
Steel Fasteners ProofLoad Test ::Uptol000KN,
201 8
Size: M6 to M39
115 IS 1367 ( part 3): Quantative :0.5KN
Steel Fasteners Tensile Test 2%@480lvPa
2002 -1000KN
116 Proofload Test,
IS 1367 ( part 3)
Steel Fasteners Wedgeload & Qualitative
2002
HeadSoundness Test
117 Steel Fastemers ( Quantative :0.5KN
Tensile Test, IRS T10: : 2000 2%@480MPa
Bolt,Nut,Stud, Screw) -t000KN
118. , Proofload Test,
Steel Fasterners (
Wedgeload & IRS T10: : 2000 Qualitative
Bolt,Nut,Stud, Screw)
HeadSoundness Test
119 Steel Fasterners (Bolt,Stud, Quantative :0.5KN
Tensile Test , ISO 898-l: 1999 2%@480NIPa
Screw) -l000KN
120. Proofload Test,
Steel Fasterners (Bolt,Stud,
Wedgeload & ISO 898-1: 1999 Qualitative
Screw)
HeadSoundness Test
121 Steel Fasterners (Bolt,But, Quantative :0.5KN
Tensile Test IRS T23:: 1967 2%@480MPa
Stud, Screw -1000KN
122 Proofuoad Test,
Steel Fasterners (Bolt,But, Qualitative
Wedgeload & IRS T23:: 1967
Stud, Screw
HeadSoundness Test
123 Qualitative ::Upto
Steel Fasterners (Nut) Proofload Test ISO 898-2: : 1992 1000KN, size: M8
to M39
124. Qualitative:5 mm
lS 2329 :2005 RA:
Steel Tubes Pipe Bend Test to 50 mm @
201'7
Diameter Pipes
125 Tension Clamp Fittings BS 3288, part-l:
Failing Load Qualitative
Conductor 2014
126. Tension Clamp Fittings BS 3288,pafi-l
Tensile Strength Qualitative
Conductor 2014
127 Tension Clamp Fittings BS 3288 Part-I:
Dimension Verification Qualitative
Conductor 2014
'128. Tension Clamp Fittings BS 3288 part-I
Mechanical Load Test Qualitative
Conductor 2014
Tension Clamp Fittings Slip Strength Test of 3.37 kN @ 54.08
BS 3288 P-l: 2014 6 kN to 600 kN
Conductor Tension Clamp KN
1 30. Tension Clamp Fittings Slip Strength Test of IS 2486 Part-l: 3.37 KN @) 54.08
6 kN to 600 kN
Conductor Tension Clamp 1 993 KN
131 Tension Clamp Fittings
UTS of polling Loop BS:1490:1988 Qualitative
Conductor
132. Tension Clamp Fittings BS:3288 Part - I:
Visual Verification Qualitative
Conductor 2014
1 33. IS:2121(P-1) Cl.
Transmission Line Hardware
Bend Test 7.10, IS:2486 (P-4) Qualitative @
& Accessories
Cl.3.3: l98l
134. Transmission Line Hardware IS: 2121 (P-3):
Slip Test Qualitative @
& Accessories 1992
1 35. Transmission Line Hardware IS 2486, BS 3288 Qualitative :Slip
Slip Testing @
& Accessories 2018 Testing
1 36. IS: 2486 (P-1), IS
Transmission Line Hardware
Tensile Test 2r21 (P-l), BS: Qualitative @)
& Accessories
3288:1981
137 IS: 2486 (P-1), (P-
2), (P-3) Cr. 5.2, (P-
Transmission Line Hardware Veriflcation of 4) C1.6.3, IS: 556
Qualitative @
& Accessories Dimension Cl. 14,1S:2121(P-
r) cr.7.3, rS:
10162 CI.5.3: 1993
138 IS: 2486 (P-l), (P-
Transmission Line Hardware
Visual Examination 4), IS:2121 (P-1), Qualitative @
& Accessories (P-2). (P-3): l98l
"When referring to publications like APHA, CLSI, lP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as
appropriate.
tThe
value at which uncertainty of measurement estimated shall also be specified.
CAB performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent facility and / or at site. Refer
NABL 130 for details.
?.
& Name Signature, Date & l.lame Signature, Date & Name
of CAB of of Lead Assessor
r P. S. Bhattach,Blva
i cEo '--
,ftrrD
,t,l t08