Professional Documents
Culture Documents
BG V16.1 System Specifications
BG V16.1 System Specifications
Version 16.1
System Specifications
BroadGate Product Line System Specifications
V16.1
Catalog No: X91206
Drawing No: 426006-2016-013-A08
May 2014
11th Edition
ECI's NPT-1200, NPT-1020, NPT-1021, and NPT-1010 comply with the CE2.0 standard.
ECI's qualification lab is accredited by A2LA for competence in electrical testing according to
the International Standard ISO IEC 17025-2005 General Requirements for the Competence of
Testing and Calibration Laboratories.
Parent Topic
1 About This Manual
Parent Topic
1 About This Manual
WARNING: failure to follow directions could result in bodily harm or loss of life.
LASER WARNING: how to avoid personal injury. All personnel involved in equipment
installation, operation, and maintenance must be aware that laser radiation is invisible.
Therefore, although protective devices generally prevent direct exposure to the beam,
personnel must strictly observe the applicable safety precautions and, in particular, must
avoid staring into optical connectors, either directly or using optical instruments.
ESD: information on how to avoid discharge of static electricity and subsequent damage to
the unit.
TIP: helpful information and handy hints that can make your task easier.
Parent Topic
1 About This Manual
Parent Topic
1 About This Manual
Parent Topic
1 About This Manual
Parent Topic
1 About This Manual
Parent Topic
2.1 Cross-Connect Specifications
Parent Topic
2.1 Cross-Connect Specifications
Parent Topic
2 BG-20 Specifications
2.3 Synchronization
There are five types of timing references available from SDH/PDH multiple timing sources:
From any 2 Mbps PDH tributary interface
From any SDH line
From any GbE port which supports synchronous Ethernet 1
An external input of 2 MHz and 2 Mbps
G.813 internal clock
Synchronization Status Marker (SSM) support is provided per ITU-T G.781, G.783, (G.782).
Parent Topic
2 BG-20 Specifications
Parent Topic
2 BG-20 Specifications
Parent Topic
2 BG-20 Specifications
1
In BG-20, MPoE_12G, ME_2G_4F, and MPS_2G_8F support synchronous Ethernet
Parent Topic
2.6 I/O Interfaces
Parent Topic
2.6 I/O Interfaces
Parent Topic
2.6 I/O Interfaces
Parent Topic
2.6 I/O Interfaces
Parent Topic
2.6 I/O Interfaces
Parent Topic
2.6 I/O Interfaces
2.7 Management
Applicable specifications G.784, G.774, M.3010,
LightSoft (ECI Telecom’s Network Manager) on SUN workstation(s)
server and client for managing all
ECI Telecom equipment
EMS-APT (element manager) on PC or SUN workstation(s)
LCT-APT (local craft terminal) on PC
Parent Topic
2 BG-20 Specifications
Parent Topic
2.7 Management
TRANSMITTER
RECEIVER 3
Min. sensitivity (BER of 1 * 10-12) -28 -34 -34 -37 -42 -42
EOL (dBm)
2
Application code is in reference to ITU-T Recommendation G.691.
3
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
TRANSMITTER
RECEIVER 7
Min. sensitivity (BER of 1 * 10-12) -32 -32 -32 -32 -34 -34
EOL (dBm)
Parent Topic
2.8 SDH Interfaces
4
Application code is in reference to ITU-T Recommendation G.691.
5
BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.
6
BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.
7
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
8
Application code S 4.1 L 4.1 L 4.2 V5 LC5
TRANSMITTER
RECEIVER 9
Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -28 -28 -28 -34 -29
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
8
Application code is in reference to ITU-T Recommendation G.691.
9
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
TRANSMITTER
RECEIVER 11
Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -28 -28 -28 -28
Parent Topic
2.8 SDH Interfaces
10
Application code is in reference to ITU-T Recommendation G.691.
11
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
Orderwire
Rack Alarm Panel
Parent Topic
2 BG-20 Specifications
LCAS mode LCAS and LCAS and LCAS and Non-LCAS (in EoP mode)
Non-LCAS Non-LCAS
Data handling Layer 1 & Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1
Layer 2 (support double (support Layer 2
tagging) (support double tagging and MPLS)
double tagging and MPLS)
LCAS mode LCAS and LCAS and LCAS and LCAS and
Non-LCAS Non-LCAS Non-LCAS Non-LCAS
Maximum frame length 9022 Bytes 9216 Bytes 9216 Bytes 12 KBytes
supported
Data handling Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1 & Layer 2
(support
(support double tagging and MPLS) (support
double tagging and MPLS) double tagging and MPLS)
Parent Topic
2.10 Ethernet Specifications
Transmitter type GbE/FC1/ GbE/FC1/ GbE/FC1/ GbE/FC1/ FX, short-reach FX, short-reach
FICON(2) FICON(2) FICON(2) laser, 1310 laser, 1310 nm,
FICON(2) long-reach laser, very long-reach very long-reach multimode single mode
short-reach 1310 nm, single laser, 1550 nm, laser, 1550 nm,
laser, 850 nm, mode single mode single mode
multimode
Typical Rx LOS -24 -29 -25 -25 < -33 < -28
level (dBm)
Connector LC LC LC LC LC LC
Transmitter type Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional
1310 nm 1490 nm 1310 nm e 1490 nm 1490 nm SFP, 1590 nm
Average receiver < -21 < -21 < -23 < -23 -26 -26
sensitivity (dBm)
Typical Rx LOS level < -22 < -22 < -24 < -24 < -26 < -26
(dBm)
Connector LC LC LC LC LC LC
Fiber lengths 10 km 10 km 40 km 40 km 80 km 80 km
(9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF)
Parent Topic
2.10 Ethernet Specifications
2.10.3 BG-20B_L1
Interface type 10BaseT/100BaseT
Standards compliance IEEE802.3, IEEE802.3u G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Certified Ethernet service EPL as per Metro Ethernet Forum, MEF9
Parent Topic
2.10 Ethernet Specifications
2.10.4 BG-20B_L2
Interface type 10BaseT/100BaseT
Switch capacity 5 Gbps
MAC address table capacity 6,144
Certified Ethernet services EPL as per Metro Ethernet Forum, MEF9 and MEF14, EVPL as per MEF9 and
MEF14, ELAN as per MEF9 and MEF14
Parent Topic
2.10 Ethernet Specifications
2.10.5 BG-20B_L2M
Interface type 10BaseT/100BaseT
Switch capacity 1.3 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094 as per IEEE 802.1ad
Supported MPLS tunnel queues 1000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domain
Supported maximum PWs 4000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI ports per 16
VSI
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Supported maximum multicast groups 128
LAG support up to 7 LAGs with up to 4 port members per LAG
Supported BFD intervals 100 ms, 1000 ms
Parent Topic
2.10 Ethernet Specifications
2.10.6 BG-20C
Interface type 10BaseT/100BaseT
Switch capacity 1.3 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094 as per IEEE 802.1ad
Supported MPLS tunnel queues 1000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domain
Supported maximum PWs 4000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI ports per VSI 16
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Supported maximum multicast groups 128
LAG support up to 7 LAGs with up to 4 port members per LAG
Supported BFD intervals 100 ms, 1000 ms
Maximum number of 100 ms BFD sessions 10
Maximum number of 1000 ms BFD sessions 100
Parent Topic
2.10 Ethernet Specifications
2.10.7 ESW_2G_8F_E
Interface type 10BaseT/100BaseT, 1000Base-SX/LX/ZX/EX
Switch capacity 5 Gbps
MAC address table capacity 6144
Supported VLAN quantity 1024 * 4094 as per IEEE 802.1ad
Flow numbers 512
Policer CIR levels 8
Policer CBS levels 8
Queues in each egress port 4
MSTP instance number 32
LAG support up to 7 LAGs with up to 4 port members per LAG
Standards compliance IEEE 802.1D, IEEE802.1p, IEEE802.1Q, IEEE802.1ad, IEEE802.1w, IEEE802.1s,
IEEE802.3, IEEE802.3ad, IEEE802.3u, IEEE802.3z, G.707, G.783, G.7041 (GFP),
X.86 (LAPS), G.7042 (LCAS)
Certified Ethernet services EPL as per Metro Ethernet Forum, MEF9 and MEF14, EVPL as per MEF9 and
MEF14, ELAN as per MEF9 and MEF14
Parent Topic
2.10 Ethernet Specifications
2.10.8 MPS_2G_8F
Interface type 1000Base-X, 10/100/1000BaseTx
100Base-FX, 10/100Base-Tx,
Switch capacity 3.0 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 2000
Supported Bidirectional LSPs 256
Parent Topic
2.10 Ethernet Specifications
2.10.9 MPoE_12G
Interface type 3 x 1000Base-X/100Base-FX
8 x 10/100/1000Base-Tx with PoE
PSE pin-out IEEE 802.3af, Alternative A
Supported PD type IEEE 802.3at type 1, type 2
Maximum PoE power per card 90 W 12
Switch capacity 10 Gbps
12
With EXT-2U shelf.
Parent Topic
2.10 Ethernet Specifications
2.10.10 MEoP_4/MEoP_4H
LAN Interface 4 x 10BaseT/100BaseT
Network interface 16 x EoP channels
Supported VLAN ID 4094 * 4094 as per IEEE 802.1ad
Standards compliance IEEE802.3, IEEE802.3x, IEEE802.3u, 802.3Q G.704, G.7043 (PDH VCAT), G.8040
(GFP mapping into PDH)
Certified Ethernet services EPL as per Metro Ethernet Forum, MEF9 and MEF14, EVPL as per MEF9 and
MEF14,
Parent Topic
2.10 Ethernet Specifications
2.10.11 MGE_1_L1
Interface type 1000Base-SX/LX/ZX/EX
1000BaseT
Standards compliance IEEE802.3, IEEE802.3z, G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Parent Topic
2.10 Ethernet Specifications
2.10.12 ME_2G_4F
Interface type 1000Base-X, 10/100/1000BaseTx
10/100Base-Tx
100Base-FX
Switch capacity 3 Gbps
MAC address table capacity 32768
Supported VLAN quantity 1024 * 4094 as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 2000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domain
Supported maximum PWs 8000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
Number of Sync-E ports 2 GbE ports
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI port per VSI 16
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Supported maximum multicast groups 250
LAG support up to 7 LAGs with up to 4 port members per LAG
Supported BFD intervals 100 ms, 1000 ms
Maximum number of 100 ms BFD sessions 10
Maximum number of 1000 ms BFD 100
sessions
Standards compliance IEEE802.1p, IEEE802.1Q, IEEE802.1ad, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah, IEEE802.3u,
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090 RFC5586,
RFC5654, RFC5880, RFC5921, RFC6428 Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7041 (GFP), G.7042 (LCAS),
G.8032 MEF9, MEF10, MEF14
Parent Topic
2.10 Ethernet Specifications
2.10.13 DMCE1_32
Interfaces 32 x E1
1 x GbE Combo
CES service Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)
Number of CES service 32
Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP
Encapsulation Protocol in integration mode CESoETH, CESoMPLS
CES clock recovery mechanism Adaptive
Differential
Reference clock frequency for DCR RTP 19.44 MHz
timestamp 25 MHz
Adaptive timing domain 32
Differential timing domain 32
Tx Timing mode Recovered from CES stream
System timing
Loop timing
Payload time 125~8000us@125us
Jitter buffer Max delay var 1000-64000 @1000 µsec
Jitter buffer Min latency 500-32000 @500 µsec
Standards compliance IEFT RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.703
Parent Topic
2.10 Ethernet Specifications
Parent Topic
2 BG-20 Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
2.11.3 Timing
Any of the following clock sources can be selected as a timing reference:
Any Dslot (SM_CODIR_4E, SM_V35_V11)
Internal clock source
SDH distributed timing
Two of 32 possible clocks derived from the card’s E1 mappers and framers
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
Parent Topic
2.11 SM_10E Specifications
2.11.13.1 General
Maximum number of channels per 2
module
Maximum number of channels per 6
card
Maximum number of channels per 18
shelf
Power consumption 3W
Parent Topic
2.11.13 SM_C37.94S Specifications
Parent Topic
2.11.13 SM_C37.94S Specifications
Parent Topic
2.11.13 SM_C37.94S Specifications
Parent Topic
2.11 SM_10E Specifications
M_EoP 13
Parent Topic
2.11 SM_10E Specifications
13
For SM_10E only.
2.12.1 Dimensions (H x W x D)
BG-20C-DC/AC shelf 44 mm x 223.5 mm x 224 mm
BG-20B_L1/L2/L2M shelf 44 mm x 440 mm x 243 mm
BG-20B shelf traffic daughter module 44 mm x 87 mm x 160 mm
INF_20B/AC_CONV-20B 44 mm x 98 mm x 203 mm
BG-20EH shelf 88.9 mm x 440 mm x 243 mm
BG-20E/BG-20EH expansion card 25.4 mm x 265 mm x 210 mm
INF_20E/AC_CONV-20E 44 mm x 98 mm x 210 mm
INF_E2U 26.6 mm x 111.2 mm x 222 mm
FCU_20EH 85.4 mm x 41 mm x 222 mm
Racks 2200/2600 mm x 600 mm x 300 mm
Parent Topic
2.12 Physical Specifications
2.12.2 Weight
BG-20B fully populated 5 kg
BG-20E fully populated 8 kg
BG-20EH fully populated 8 kg
BG-20C 2.5 kg
Parent Topic
2.12 Physical Specifications
2.12.3 Power
Applicable specification ETSI 300 132-2
Input DC voltage -40 VDC to -72 VDC
Nominal DC power source -48 VDC or -60 VDC
Input AC voltage 110 VAC to 230 VAC; 50 Hz/60 Hz
Nominal AC power source 220 VAC or 110 VAC
BG-20B power consumption Maximum 70 W
Parent Topic
2.12 Physical Specifications
Parent Topic
2.12 Physical Specifications
2.12.5 AC_PS-E2U
AC input voltage range 100 VAC to 240 VAC; 50 Hz/60 Hz
DC output voltage -48 VDC to -70 VDC
Maximum output load power 200 W
Working temperature -5° C to +55° C
Storage temperature range -40° C to +70° C
Parent Topic
2.12 Physical Specifications
2.12.6 INF_20B
DC output voltage -48 VDC to -70 VDC
Maximum output load power 70 W
Working temperature -25° C to +70° C
Storage temperature range -40° C to +70° C
Parent Topic
2.12 Physical Specifications
2.12.7 INF_E2U
DC output voltage -48 VDC to -70 VDC
Maximum output load power 511 W (including PoE)
Working temperature -25° C to +70° C
Storage temperature range -40° C to +70° C
Parent Topic
2.12 Physical Specifications
Parent Topic
2.12 Physical Specifications
Parent Topic
2.12 Physical Specifications
2.12.10 EMC
Applicable specifications EN 300 386/2000
Applicable directive EMC directive 89/336 EEC
Parent Topic
2.12 Physical Specifications
2.12.11 Safety
Applicable specifications EN 60950/2000
Applicable CE directive LVD directive 73/23/EEC
Parent Topic
2.12 Physical Specifications
Parent Topic
2.12 Physical Specifications
2.12.13 Reliability
2.12.13.1.1 Life
Expected lifetime of the 15 years
BG-20
2.12.13.1.2 Availability
Availability of service for an end-to-end better than 99.999%
service trail passing through a protected
SDH network
Parent Topic
2.12 Physical Specifications
Parent Topic
3.1 Cross-Connect Specifications
Parent Topic
3.1 Cross-Connect Specifications
14
Requires the use of XIO30Q_1&4 cards
Parent Topic
3.1 Cross-Connect Specifications
3.2 Redundancy
DC power system INF-30B//INF-B1U/INF-30E/INF-E2U 1+1 redundancy
Cross-connect matrix XIO30 1+1 redundancy
TMU XIO30 1+1 redundancy
Parent Topic
3 BG-30 Specifications
Parent Topic
3 BG-30 Specifications
3.4 Synchronization
There are five types of timing references available from SDH/PDH multiple timing sources:
From any 2 Mbps PDH tributary interface
From any SDH line
From any GbE port that supports synchronous Ethernet 15
An external input of 2 MHz and 2 Mbps
G.813 internal clock
1588v2 PTP Ordinary Clock (DMXE_22_L2 and MPoE_12G)
Synchronization Status Message (SSM) is provided
Parent Topic
3 BG-30 Specifications
Parent Topic
3 BG-30 Specifications
Parent Topic
3 BG-30 Specifications
15
In BG-30, MPS_2G_8F, MPoE_12G, DMXE_22_L2, and DMGE_4_L2 support synchronous Ethernet.
Parent Topic
3 BG-30 Specifications
Parent Topic
3.8 I/O Interfaces
Parent Topic
3.8 I/O Interfaces
Parent Topic
3.8 I/O Interfaces
Parent Topic
3.8 I/O Interfaces
Parent Topic
3.8 I/O Interfaces
Parent Topic
3.8 I/O Interfaces
Parent Topic
3.8 I/O Interfaces
3.9 Management
Applicable specifications G.784, G.774, M.3010, M.3100
LightSoft (ECI Telecom Network on SUN workstation(s)
Manager) server and client for
managing all ECI Telecom
equipment
EMS-APT (element manager) on PC or SUN workstation(s)
LCT-APT (local craft terminal) on PC
Parent Topic
3 BG-30 Specifications
Parent Topic
3.9 Management
Parent Topic
3.9 Management
SFP transceiver name OTR1_S3 OTR1_L3 OTR1_L5 OTR1_X3 OTR1_X5 OTR1_VL5 OTR1_VLC5
Operating wavelength (nm) 1261-1360 1263-1360 1480-1580 1270-1360 1500-1520 1500-1520 1544.5-1557.5
TRANSMITTER
RECEIVER 17
Min. sensitivity (BER of -28 -34 -34 -37 -35 -42 -42
1 * 10-12) EOL (dBm)
16
Application code is in reference to ITU-T Recommendation G.691.
17
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
TRANSMITTER
RECEIVER 21
Min. sensitivity (BER of 1 * 10-12) -32 -32 -32 -32 -34 -34
EOL (dBm)
Parent Topic
3.10 SDH Interfaces
18
Application code is in reference to ITU-T Recommendation G.691.
19
BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.
20
BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.
21
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
22
Application code S 4.1 L 4.1 L 4.2 V5 LC5
TRANSMITTER
Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -28 -28 -28 -34 -29
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
22
Application code is in reference to ITU-T Recommendation G.691.
23
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
NOTE: OTR16 bidirectional SFPs (in the following table) are multirate transceivers that
support both STM-4 and STM-16.
TRANSMITTER
Parent Topic
3.10 SDH Interfaces
24
Application code is in reference to ITU-T Recommendation G.691.
25
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
TRANSMITTER
RECEIVER 27
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
26
Application code is in reference to ITU-T Recommendation G.691.
27
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
TRANSMITTER
RECEIVER 29
Max. dispersion - - - - -
(ps/nm)
Max. discrete - - - - - -
reflectance (dB)
Parent Topic
3.10 SDH Interfaces
28
Application code is in reference to ITU-T Recommendation G.691.
29
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
CWDM DWDM
TRANSMITTER
RECEIVER 30
Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -21.5 -28 -28 -28
Parent Topic
3.10 SDH Interfaces
30
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
LCAS mode LCAS and Non-LCAS LCAS and LCAS and Non-LCAS LCAS and Non-LCAS
Non-LCAS
Maximum frame length 9600 Bytes 12 KBytes 9600 Bytes 9216 Bytes
supported
Data handling Layer 1 & Layer 2 (supports Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1 & Layer 2
double (supports double (supports double (supports double
tagging and MPLS) tagging) tagging) tagging and MPLS) (supports double
tagging and MPLS)
VCAT mode 252 x VC-12 E1-X/v 252 x VC-12 252 x VC-12 504 x VC-12
12 x VC-3 12 x VC-3 12 x VC-3 48 x VC-3
4 x VC-4 4 x VC-4 4 x VC-4 14 x VC-4
LCAS mode LCAS and Non-LCAS LCAS and LCAS and LCAS and Non-LCAS LCAS and Non-LCAS
Non-LCAS Non-LCAS
Maximum frame length 9216 Bytes 12 KBytes 9022 Bytes 9216 Bytes 9216 Bytes
supported
Data handling Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1 & Layer 2
(supports double tagging and MPLS) (supports double tagging and (supports double tagging and
MPLS) MPLS)
LCAS mode LCAS and Non-LCAS LCAS and Non-LCAS LCAS and Non-LCAS
Parent Topic
3 BG-30 Specifications
3.11.1 DMFE_4_L1/DMFX_4_L1
Interface type of DMFE_4_L1 10BaseT/100BaseT
Interface type of DMFX_4_L1 100Base-FX
Standards compliance IEEE802.3, IEEE802.3u
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Certified Ethernet service EPL as per Metro Ethernet Forum, MEF9
Data handling Layer 1
Network interfaces EoS
Total WAN bandwidth 4 x VC-4
Encapsulation mode GFP
VCAT mode VC-12-X/v, VC-3-X/v, VC-4-X/v
LCAS mode LCAS and Non-LCAS
Differential delay compensation Up to 64 ms
Maximum frame length supported 9600 Bytes
Parent Topic
3.11 Ethernet Specifications
3.11.2 DMFE_4_L2/DMFX_4_L2
Interface type of DMFE_4_L2 10BaseT/100BaseT
Interface type of DMFX_4_L2 100Base-FX
Switch capacity 1.2 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 1000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported maximum PWs 4000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI port per VSI 16
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Supported maximum multicast groups 128
LAG support up to 6 LAGs with up to 4 port members per LAG
Supported BFD intervals 100 msec, 1000 msec
Maximum number of 100 ms BFD sessions 10
Maximum number of 1000 ms BFD sessions 100
Standards compliance IEEE802.1p, IEEE802.1Q, IEEE802.1ad,IEEE802.1w, IEEE802.1s,
IEEE802.1ag,EEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428
Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14
Parent Topic
3.11 Ethernet Specifications
3.11.3 ESW_2G_8F_E
Interface type 10BaseT/100BaseT, 1000Base-SX/LX/ZX/EX
Switch capacity 5 Gbps
MAC address table capacity 6,144
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Flow numbers 512
Policer CIR levels 8
Policer CBS levels 8
Queues in each egress port 4
MSTP instance number 32
LAG support up to 7 LAGs with up to 4 port members per LAG
Standards compliance IEEE802.1p, IEEE802.1Q, IEEE802.1ad, IEEE802.1s,
IEEE802.3, IEEE802.3ad, IEEE802.3u, IEEE802.3z,
G.707, G.783, G.7041 (GFP), X.86 (LAPS), G.7042 (LCAS)
Parent Topic
3.11 Ethernet Specifications
3.11.4 MPS_2G_8F
Interface type 1000Base-X, 10/100/1000BaseTx
100Base-FX, 10/100Base-Tx,
Switch capacity 3.0 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 2000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported maximum PWs 8000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
Number of Sync-E ports 2 GbE ports
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum Number of UNI/NNI port per 16
VSI
Parent Topic
3.11 Ethernet Specifications
3.11.5 MPoE_12G
Interface type 3 x 1000Base-X/100Base-FX
8 x 10/100/1000Base-Tx with PoE
PSE pin-out IEEE 802.3af, Alternative A
Supported PD type IEEE 802.3at type 1, type 2
Maximum PoE power per card 90 W 31
Switch capacity 10 Gbps
MAC address table capacity 128 K
MAC address table capacity per VSI 64 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported C-VLAN groups 16000
Supported MPLS P2P tunnel queues 8000
Supported Bidirectional LSPs 2048
Supported MPLS P2MP tunnels 32
Supported maximum PWs 16000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 128
31
With EXT-2U shelf.
Parent Topic
3.11 Ethernet Specifications
3.11.6 DMEoP_4
LAN Interface 4 x 10/100BaseT
Network interface 16 x EoP channels
Supported VLAN ID 4094 * 4094 as per IEEE 802.1ad
Parent Topic
3.11 Ethernet Specifications
3.11.7 DMGE_1_L1
Interface type 1000Base-SX/LX/ZX/EX (SFP)
1000BaseT (RJ45)
Standards compliance IEEE802.3, IEEE802.3z,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Certified Ethernet service EPL, as per Metro Ethernet Forum, MEF9
Data handling Layer 1
Network interfaces EoS
Total WAN bandwidth 4 x VC-4
Encapsulation mode GFP
VCAT mode VC-12-X/v, VC-3-X/v, VC-4-X/v
LCAS mode LCAS and Non-LCAS
Differential delay compensation Up to 64 ms
Maximum frame length supported 9600 Bytes
Parent Topic
3.11 Ethernet Specifications
3.11.8 DMGE_4_L1
Interface type 1000Base-SX/LX/ZX/EX
10/100/1000BaseT
Standards compliance IEEE802.3, IEEE802.3z,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Certified Ethernet service EPL, as per Metro Ethernet Forum, MEF9
Data handling Layer 1
Network interfaces EoS
Total WAN bandwidth 16 x VC-4
Encapsulation mode GFP
VCAT mode VC-12-X/v, VC-3-X/v, VC-4-X/v
LCAS mode LCAS and Non-LCAS
Parent Topic
3.11 Ethernet Specifications
3.11.9 DMGE_2_L2
Interface type 1000Base-X/SX/LX/ZX/EX/BD
10/100BaseT/1000BaseT (SFP)
Switch capacity 3.0 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 2000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported maximum PWs 8000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI port per VSI 16
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Supported maximum multicast groups 250
LAG support up to 7 LAGs with up to 4 port members per LAG
Supported BFD intervals 100 ms, 1000 ms
Maximum number of 100 ms BFD sessions 10
Maximum number of 1000 ms BFD sessions 100
Parent Topic
3.11 Ethernet Specifications
3.11.10 DMGE_4_L2
Interface type 1000Base-X (with optical SFP)
10/100/1000Base-T (with electrical SFP)
Switch capacity 6.5Gbps
MAC address table capacity 128 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported CVLAN groups 16000
Supported MPLS P2P tunnel queues 8000
Supported Bidirectional LSPs 2048
Supported MPLS P2MP tunnels 32
Maximum number of LSP1:1 Linear 1024
Protection Domains
Supported maximum PWs 16000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64 Kbps (0~2Mb/s)
1 Mbps (2Mb/s~full port rate)
CIR granularity of high CoS Shaper 1~16Mbps@1Mbps
16~32Mbps@2Mbps
32~80Mbps@8Mbps
80~128Mbps@16Mbps
128~896Mbps@32Mbps
896, 960, 1280Mbps
Parent Topic
3.11 Ethernet Specifications
3.11.11 DMXE_22_L2
10 GbE interface type (SFP+) 10GBase-SR, LR, LRM, ER, ZR, BD
10GBase-SW, LW, EW, ZW, color
GbE interface type (SFP) 1000Base-SX, LX, EX, ZX, BD (with optical SFP)
10/100/1000Base-T (with electrical SFP)
Number of Sync-E ports 4 (all 10GbE/GbE ports)
Supported types of 1588v2 PTP Clock OC (slave or master)
Two-step TC
Switch capacity 24 Gbps (for IMIX)
MAC address table capacity per switch 128 K
MAC address table capacity per VSI 64 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported C-VLAN groups 8000
Supported MPLS P2P tunnels queues 8000
Supported Bidirectional LSPs 2048
Maximum number of LSP1:1 Linear 1024
Protection Domains
Supported Bidirectional LSPs 2048
Tunnel incoming label space for pass 3072~4095
through
Tunnel incoming label space for drop 16~3071
Supported maximum PWs 8000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Parent Topic
3.11 Ethernet Specifications
3.11.12 DMCES1_4
Interfaces 4 x channelized STM-1(SFP)
1 x channelized STM-4 (SFP)
1 x GbE SFP
CES service Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)
Number of CES service 252
Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP
Encapsulation Protocol in integration mode CESoETH and CESoMPLS
CES clock recovery mechanism Adaptive Clock Recovery (ACR)
Differential Clock Recovery (DCR)
Reference clock frequency for DCR RTP 19.44 MHz
timestamp 25 MHz
Number of ACR domains 32
Number of DCR domain 252
E1 Tx Timing mode Recovered from CES stream
System timing
Loop timing
Payload time 125~8000us@125us
Jitter buffer Max delay var 1000-64000 @1000 µsec
Jitter buffer Min latency 500-32000 @500 µsec
Standards compliance IEFT RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.707, G.783
Parent Topic
3.11 Ethernet Specifications
3.11.13 DMCE1_32
Interfaces 32 x E1
1 x GbE Combo
CES service Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)
Number of CES service 32
Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP
Encapsulation Protocol in integration mode CESoETH, CESoMPLS
CES clock recovery mechanism Adaptive
Differential
Reference clock frequency for DCR RTP 19.44 MHz
timestamp 25 MHz
Adaptive timing domain 32
Differential timing domain 32
Tx Timing mode Recovered from CES stream
System timing
Loop timing
Payload time 125~8000us@125us
Jitter buffer Max delay var 1000-64000 @1000 µsec
Jitter buffer Min latency 500-32000 @500 µsec
Standards compliance IEFT RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.703
Parent Topic
3.11 Ethernet Specifications
Transmitter type GbE/FC1/ GbE/FC1/ GbE/FC1/ GbE/FC1/ FX, short-reach FX, short-reach
FICON(2) FICON(2) FICON(2) laser, 1310 laser, 1310 nm,
FICON(2) long-reach laser, very long-reach very long-reach multimode single mode
short-reach 1310 nm, single laser, 1550 nm, laser, 1550 nm,
laser, 850 nm, mode single mode single mode
multimode
Typical Rx LOS -24 -29 -25 -25 < -33 < -28
level (dBm)
Connector LC LC LC LC LC LC
Transmitter type Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional
1310 nm 1490 nm 1310 nm e 1490 nm 1490 nm SFP, 1590 nm
Average receiver < -21 < -21 < -23 < -23 -26 -26
sensitivity (dBm)
Typical Rx LOS level < -22 < -22 < -24 < -24 < -26 < -26
(dBm)
Connector LC LC LC LC LC LC
Fiber lengths 10 km 10 km 40 km 40 km 80 km 80 km
(9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF)
Parent Topic
3.11 Ethernet Specifications
TRANSMITTER
Spacing (GHz) NA NA NA NA NA NA -
RECEIVER
Min. Attenuation 5 5 11 0 0 0 -
(dB)
Min. sensitivity (BER -14.1 -14.1 -24 -11 -12.6 -6.5 -22
of 1*10-12)
EOL (dBm)
32
Application code is in reference to ITU-T Recommendation G.691.
OPTICAL PATH
BETWEEN S & R
Source type CWDM DFB CWDM DFB CWDM DFB CWDM DFB
33
Application code is in reference to ITU-T Recommendation G.691.
APPLICATION CODE 34 PS AL
TRANSMITTER
Operating wavelength (nm) 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1529.55-1561.61
1611
Modulation - -
RECEIVER
34
Application code is in reference to ITU-T Recommendation G.691.
Parent Topic
3.11 Ethernet Specifications
Connector RJ-45
Parent Topic
3 BG-30 Specifications
NOTE: The suffix xx in the module name designates the distance (nominal compensation
length) in km.
Module name Dispersion [ps/nm] Insertion loss [dB] Application (16ps x nm/Km)
Parent Topic
3 BG-30 Specifications
Parent Topic
3 BG-30 Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
3.14.3 Timing
Any of the following clock sources can be selected as a timing reference:
Any Dslot (SM_CODIR_4E, SM_V35_V11)
Internal clock source
SDH distributed timing
Two of 32 possible clocks derived from the card’s E1 mappers and framers
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3.14 SM_10E Specifications
3.14.15.1 General
Maximum number of channels per 2
module
Maximum number of channels per 6
card
Maximum number of channels per 18
shelf
Power consumption 3W
Parent Topic
3.14.15 SM_C37.94S Specifications
Parent Topic
3.14.15 SM_C37.94S Specifications
Parent Topic
3.14.15 SM_C37.94S Specifications
Parent Topic
3.14 SM_10E Specifications
Parent Topic
3 BG-30 Specifications
3.16.1 Dimensions (H x W x D)
BG-30B shelf 44.4 mm x 440 mm x 243 mm
MCP30/MCP30B 20 mm x 105 mm x 222 mm
XIO30 20 mm x 105 mm x 222 mm
BG-30B shelf traffic daughter 20 mm x 105 mm x 222 mm
module
INF-30B/INF-30BH/INF-B1U 20 mm x 76 mm x 222 mm
FCU-30B/FCU-30BH 41 mm x 44 mm x 222 mm
BG-30E/EXT-2U shelf 88.9 mm x 443.4 mm x 243 mm
BG-30E/EXT-2U shelf traffic card 26 mm x 283 mm x 222 mm
INF-30E/INF-E2U 26 mm x 111 mm x 222 mm
FCU-30E/FCU-E2U 85 mm x 40 mm x 222 mm
Racks 2200/2600 mm x 600 mm x 300 mm
Parent Topic
3.16 Physical Specifications
3.16.2 Weight
BG-30B fully populated 5 kg
BG-30E fully populated 8 kg
EXT-2U fully populated 8 kg
Parent Topic
3.16 Physical Specifications
3.16.3 Power
Applicable specification ETSI 300 132-2
Input DC voltage -40 VDC to -72 VDC
Nominal DC power source -48 VDC
Input AC voltage 110 VAC to 230 VAC; 50 Hz/60 Hz
Nominal AC power source 220 VAC or 110 VAC
BG-30B (with INF-30B) power Maximum 130 W
consumption
BG-30B (with INF-30B/INF-B1U) Maximum 200 W
power consumption
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
3.16.8 INF_E2U
DC output voltage -48 VDC to -70 VDC
Maximum output load power 511 W (including PoE)
Working temperature -25° C to +70° C
Storage temperature range -40° C to +70° C
Parent Topic
3.16 Physical Specifications
3.16.9 AC_PS-E2U
AC input voltage range 100 VAC to 240 VAC; 50 Hz/60 Hz
DC output voltage -48 VDC to -70 VDC
Maximum output load power 200 W
Working temperature -5° C to +55° C
Storage temperature range -40° C to +70° C
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
3.16.12 EMC
Applicable specifications EN 300 386/2000
Applicable directive EMC directive 89/336 EEC
Parent Topic
3.16 Physical Specifications
3.16.13 Safety
Applicable specifications EN 60950/2000
Applicable CE directive LVD directive 73/23/EEC
Parent Topic
3.16 Physical Specifications
Parent Topic
3.16 Physical Specifications
3.16.15 Reliability
3.16.15.1.1 Life
Expected lifetime of the BG-30 15 years
3.16.15.1.2 Availability
Availability of service for an end-to-end better than 99.999%
service
trail passing through a protected SDH network
Parent Topic
3.16 Physical Specifications
Parent Topic
4.1 Cross-Connect Specifications
Parent Topic
4 BG-64 Specifications
4.3 Redundancy
DC power system INF-64/INF-64H/INF-30E/INF-E2U 1+1 redundancy
Cross-connect matrix XIO64 1+1 redundancy
XIO16_4 1 + 1 redundancy
TMU XIO64 1+1 redundancy
XIO16_4 1 + 1 redundancy
Parent Topic
4 BG-64 Specifications
Layer 2 cards 1:1 for DMGE_4_L2 with optical and/or copper ports
1:1 for DMGE_8_L2 with optical and/or copper ports
1:1 for DMGE_2_L2 with optical ports
1:1 for DMXE_48_L2 with optical and/or copper ports
1:1 for DMXE_22_L2 with optical and/or copper ports
Parent Topic
4 BG-64 Specifications
4.5 Synchronization
There are five types of timing references available from SDH/PDH multiple timing sources:
From any 2 Mbps PDH tributary interface
From any SDH line
From any GbE/10GbE port which supports synchronous Ethernet 35
An external input of 2 MHz and 2 Mbps
G.813 internal clock
1588v2 Ordinary Clock (on MPoE_12G, DMXE_48_L2 and DMXE_22_L2)
Synchronization Status Marker (SSM) is provided.
Parent Topic
4 BG-64 Specifications
Parent Topic
4 BG-64 Specifications
Parent Topic
4 BG-64 Specifications
35
In BG-64, DMGE_4_L2, DMGE_8_L2 and MPS_2G_8F support synchronous Ethernet.
Parent Topic
4.8 I/O Interfaces
Parent Topic
4.8 I/O Interfaces
Parent Topic
4.8 I/O Interfaces
Frame G.707
Line code CMI
Parent Topic
4.8 I/O Interfaces
Parent Topic
4.8 I/O Interfaces
Parent Topic
4.8 I/O Interfaces
Parent Topic
4.8 I/O Interfaces
Parent Topic
4.8 I/O Interfaces
4.9 Management
Applicable specifications G.784, G.774, M.3010, M.3100
LightSoft (ECI Telecom Network on SUN workstation(s)
Manager) server and client for
managing all ECI Telecom
equipment
EMS-APT (element manager) on PC or SUN workstation(s)
LCT-APT (local craft terminal) on PC
Parent Topic
4 BG-64 Specifications
Parent Topic
4.9 Management
Parent Topic
4.9 Management
SFP transceiver name OTR1_S3 OTR1_L3 OTR1_L5 OTR1_X3 OTR1_X5 OTR1_VL5 OTR1_VLC5
Operating wavelength (nm) 1261-1360 1263-1360 1480-1580 1270-1360 1500-1520 1500-1520 1544.5-1557.5
TRANSMITTER
RECEIVER 37
Min. sensitivity (BER of -28 -34 -34 -37 -35 -42 -42
1 * 10-12) EOL (dBm)
36
Application code is in reference to ITU-T Recommendation G.691.
37
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
SFP transceiver name OTR1_S3 OTR1_L3 OTR1_L5 OTR1_X3 OTR1_X5 OTR1_VL5 OTR1_VLC5
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
TRANSMITTER
Min. sensitivity (BER of 1 * 10-12) -32 -32 -32 -32 -34 -34
EOL (dBm)
38
Application code is in reference to ITU-T Recommendation G.691.
39
BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.
40
BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.
41
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
Parent Topic
4.10 SDH Interfaces
TRANSMITTER
Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -28 -28 -28 -34 -29
42
Application code is in reference to ITU-T Recommendation G.691.
43
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
NOTE: OTR16 bidirectional SFPs (in the following table) are multirate transceivers that
support both STM-4 and STM-16.
TRANSMITTER
44
Application code is in reference to ITU-T Recommendation G.691.
Parent Topic
4.10 SDH Interfaces
TRANSMITTER
45
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
46
Application code is in reference to ITU-T Recommendation G.691.
RECEIVER 47
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
TRANSMITTER
47
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
48
Application code is in reference to ITU-T Recommendation G.691.
RECEIVER 49
Max. dispersion - - - - -
(ps/nm)
Max. discrete - - - - - -
reflectance (dB)
Parent Topic
4.10 SDH Interfaces
CWDM DWDM
TRANSMITTER
49
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
CWDM DWDM
RECEIVER 50
Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -21.5 -28 -28 -28
Parent Topic
4.10 SDH Interfaces
50
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.
TRANSMITTER
Spacing (GHz) NA NA NA NA NA
RECEIVER
51
The OTR64I_PI3 and OTR64I_PS3 have respectively, the same parameters as the OTR64_PI3 and OTR64_PS3, but feature an extended operating
temperature range from -40°C to +85°C.
52
The OTR64I_PI3 and OTR64I_PS3 have respectively, the same parameters as the OTR64_PI3 and OTR64_PS3, but feature an extended operating
temperature range from -40°C to +85°C.
53
Application code is in reference to ITU-T Recommendation G.691.
TRANSMITTER
RECEIVER
Min. sensitivity (BER -24 -24 S band, C band S band, C band -24 -28 55
of 1*10-12) -16 -16
EOL (dBm)
L band -15 L band -15
OPTICAL PATH
BETWEEN S & R
54
Application code is in reference to ITU-T Recommendation G.691.
55
With FEC/EFEC enabled.
XFP TRANSCEIVER
OTR64_S27BD OTR64_S33BD OTR64_L27BD OTR64_L33BD OTR64_E27BD OTR64_E33BD
NAME
TRANSMITTER
Maximum attenuation 9 9 16 16 21 21
(dB)
Minimum attenuation 0 0 5 5 11 11
(dB)
RECEIVER
Max. receiver
reflectance (dB)
56
Application code is in reference to ITU-T Recommendation G.691.
XFP TRANSCEIVER
OTR64_S27BD OTR64_S33BD OTR64_L27BD OTR64_L33BD OTR64_E27BD OTR64_E33BD
NAME
OPTICAL PATH
BETWEEN S & R
Max. discrete -- -- -- --
reflectance (dB)
Parent Topic
4.10 SDH Interfaces
Data handling Layer 1 & Layer 2 (supports Layer 1 & Layer 2 (supports Layer 1 & Layer 2 Layer 1 & Layer 2
double double
tagging and MPLS) tagging and MPLS) (supports double tagging (supports double tagging
and MPLS) and MPLS)
VCAT mode 252 x VC-12 252 x VC-12 504 x VC-12 504 x VC-12
12 x VC-3 48 x VC-3 48 x VC-3
12 x VC-3 4 x VC-4 14 x VC-4 16 x VC-4
4 x VC-4
LCAS mode LCAS and Non-LCAS LCAS and Non-LCAS LCAS and Non-LCAS LCAS and Non-LCAS
Maximum frame length 9216 Bytes 9216 Bytes 9216 Bytes 9736 Bytes
supported
Service interfaces 2 x GbE Combo + 6 x GbE 4 x 10 GbE + 8 x GbE 2 x 10 GbE + 2 x GbE 4 x GbE optical + 8 x GbE
electrical
Data handling Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1 & Layer 2 Layer 1 & Layer 2
(supports double tagging (supports double tagging (supports double tagging (supports double tagging
and MPLS) and MPLS) and MPLS) and MPLS)
VCAT mode 504 x VC-12 504 x VC-12 504 x VC-12 252 x VC-12
96 x VC-3 96 x VC-3 96 x VC-3 48 x VC-3
32 x VC-4 32 x VC-4 32 x VC-4 16 x VC-4
LCAS mode LCAS and Non-LCAS LCAS and Non-LCAS LCAS and Non-LCAS LCAS and Non-LCAS
Maximum frame length 9736 Bytes 9736 Bytes 9736 Bytes 9736 Bytes
supported
Parent Topic
4 BG-64 Specifications
4.11.1 DMFE_4_L1/DMFX_4_L1
Interface type of DMFE_4_L1 10BaseT/100BaseT
Interface type of DMFX_4_L1 100Base-FX
Standards compliance IEEE802.3, IEEE802.3u
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Certified Ethernet service EPL as per Metro Ethernet Forum, MEF9
Data handling Layer 1
Network interfaces EoS
Total WAN bandwidth 4 x VC-4
Encapsulation mode GFP
VCAT mode VC-12-X/v, VC-3-X/v, VC-4-X/v
LCAS mode LCAS and Non-LCAS
Differential delay compensation Up to 64 ms
Maximum frame length supported 9600 Bytes
Parent Topic
4.11 Ethernet Specifications
4.11.2 DMFE_4_L2/DMFX_4_L2
Interface type of DMFE_4_L2 10BaseT/100BaseT
Interface type of DMFX_4_L2 100Base-FX
Switch capacity 1.2 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 1000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported maximum PWs 4000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI port per VSI 16
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Parent Topic
4.11 Ethernet Specifications
4.11.3 MPS_2G_8F
Interface type 1000Base-X, 10/100/1000BaseTx
100Base-FX, 10/100Base-Tx,
Switch capacity 3.0 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 2000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported maximum PWs 8000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
Number of Sync-E ports 2 GbE ports
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum Number of UNI/NNI port per 16
VSI
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Parent Topic
4.11 Ethernet Specifications
4.11.4 MPoE_12G
Interface type 3 x 1000Base-X/100Base-FX
8 x 10/100/1000Base-Tx with PoE
PSE pin-out IEEE 802.3af, Alternative A
Supported PD type IEEE 802.3at type 1, type 2
Maximum PoE power per card 90 W 57
Switch capacity 10 Gbps
MAC address table capacity 128 K
MAC address table capacity per VSI 64 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported C-VLAN groups 16000
Supported MPLS P2P tunnel queues 8000
Supported Bidirectional LSPs 2048
Supported MPLS P2MP tunnels 32
Supported maximum PWs 16000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 128
57
With EXT-2U shelf.
Parent Topic
4.11 Ethernet Specifications
4.11.5 DMGE_4_L1
Interface type 1000Base-SX/LX/ZX/EX
10/100/1000BaseT
Standards compliance IEEE802.3, IEEE802.3z,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)
Certified Ethernet service EPL, as per Metro Ethernet Forum, MEF9
Parent Topic
4.11 Ethernet Specifications
4.11.6 DMGE_2_L2
Interface type 1000Base-X/SX/LX/ZX/EX/BD
10/100BaseT/1000BaseT (SFP)
Switch capacity 3.0 Gbps
MAC address table capacity 32,768
Supported VLAN quantity 1024 * 4094, as per IEEE 802.1ad
Supported MPLS P2P tunnel queues 2000
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported Bidirectional LSPs 256
Maximum number of LSP1:1 Linear 128
Protection Domains
Supported maximum PWs 8000
Supported maximum VSIs 1000
Supported maximum policers 2000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Maximum sites per VPLS instance 32
Maximum number of UNI/NNI port per VSI 16
Maximum number of CoSs 8
MSTP/ERPS instance number 32
Supported maximum multicast groups 250
LAG support up to 7 LAGs with up to 4 port members per LAG
Supported BFD intervals 100 ms, 1000 ms
Parent Topic
4.11 Ethernet Specifications
4.11.7 DMGE_4_L2
Interface type 1000Base-X (with optical SFP)
10/100/1000Base-T (with electrical SFP)
Switch capacity 6.5Gbps
MAC address table capacity 128 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported CVLAN groups 16000
Supported MPLS P2P tunnel queues 8000
Supported Bidirectional LSPs 2048
Supported MPLS P2MP tunnels 32
Maximum number of LSP1:1 Linear 1024
Protection Domains
Supported maximum PWs 16000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 128
CIR/EIR granularity of policer 64 Kbps (0~2Mb/s)
1 Mbps (2Mb/s~full port rate)
CIR granularity of high CoS Shaper 1~16Mbps@1Mbps
16~32Mbps@2Mbps
32~80Mbps@8Mbps
80~128Mbps@16Mbps
128~896Mbps@32Mbps
896, 960, 1280Mbps
Parent Topic
4.11 Ethernet Specifications
4.11.8 DMGE_8_L2
Interface type 1000Base-X (with optical SFP)
10/100/1000Base-T (with copper SFP)
Switch capacity 10 Gbps
Parent Topic
4.11 Ethernet Specifications
4.11.9 DMXE_22_L2
10 GbE interface type (SFP+) 10GBase-SR, LR, LRM, ER, ZR, BD
10GBase-SW, LW, EW, ZW, color
GbE interface type (SFP) 1000Base-SX, LX, EX, ZX, BD (with optical SFP)
10/100/1000Base-T (with electrical SFP)
Number of Sync-E ports 4 (all 10GbE/GbE ports)
Supported types of 1588v2 PTP Clock OC (slave or master)
Two-step TC
Switch capacity 24 Gbps (for IMIX)
MAC address table capacity per switch 128 K
MAC address table capacity per VSI 64 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported C-VLAN groups 8000
Supported MPLS P2P tunnels queues 8000
Supported Bidirectional LSPs 2048
Maximum number of LSP1:1 Linear 1024
Protection Domains
Supported Bidirectional LSPs 2048
Tunnel incoming label space for pass 3072~4095
through
Tunnel incoming label space for drop 16~3071
Supported maximum PWs 8000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 128
Parent Topic
4.11 Ethernet Specifications
4.11.10 DMXE_48_L2
10 Gb interface type (SFP+) 10GBase-SR, LR, LRM, ER, ZR, BD
10GBase-SW, LW, EW, ZW
GbE interface type (SFP) 1000Base-SX, LX, EX, ZX, BD (with optical SFP)
10/100/1000Base-T (with electrical SFP)
Number of Sync-E ports 12 (all 10GbE/GbE ports)
Supported types of 1588v2 PTP Clock OC (slave or master)
Two-step TC
Switch capacity 50 Gbps (for IMIX)
MAC address table capacity per switch 128 K
MAC address table capacity per VSI 64 K
Supported VLAN quantity 4000 * 4094, as per IEEE 802.1ad
Supported C-VLAN groups 16000
Supported MPLS P2P tunnels queues 16000
Supported Bidirectional LSPs 2048
Maximum number of LSP1:1 Linear 1024
Protection Domains
Supported Bidirectional LSPs 2048
Supported MPLS P2MP tunnels 32
Supported maximum PWs 16000
Supported maximum VSIs 4000
Supported maximum policers 4000
Supported maximum policer profiles 256
CIR/EIR granularity of policer 64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)
Parent Topic
4.11 Ethernet Specifications
4.11.11 DMCES1_4
Interfaces 4 x channelized STM-1(SFP)
1 x channelized STM-4 (SFP)
1 x GbE SFP
CES service Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)
Number of CES service 252
Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP
Encapsulation Protocol in integration mode CESoETH and CESoMPLS
CES clock recovery mechanism Adaptive Clock Recovery (ACR)
Differential Clock Recovery (DCR)
Reference clock frequency for DCR RTP 19.44 MHz
timestamp 25 MHz
Number of ACR domains 32
Number of DCR domain 252
E1 Tx Timing mode Recovered from CES stream
System timing
Loop timing
Payload time 125~8000us@125us
Jitter buffer Max delay var 1000-64000 @1000 µsec
Jitter buffer Min latency 500-32000 @500 µsec
Parent Topic
4.11 Ethernet Specifications
4.11.12 DMCE1_32
Interfaces 32 x E1
1 x GbE Combo
CES service Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)
Number of CES service 32
Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP
Encapsulation Protocol in integration mode CESoETH, CESoMPLS
CES clock recovery mechanism Adaptive
Differential
Reference clock frequency for DCR RTP 19.44 MHz
timestamp 25 MHz
Adaptive timing domain 32
Differential timing domain 32
Tx Timing mode Recovered from CES stream
System timing
Loop timing
Payload time 125~8000us@125us
Jitter buffer Max delay var 1000-64000 @1000 µsec
Jitter buffer Min latency 500-32000 @500 µsec
Standards compliance IEFT RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.703
Parent Topic
4.11 Ethernet Specifications
Transmitter type GbE/FC1/ GbE/FC1/ GbE/FC1/ GbE/FC1/ FX, short-reach FX, short-reach
FICON(2) FICON(2) FICON(2) laser, 1310 laser, 1310 nm,
FICON(2) long-reach laser, very long-reach very long-reach multimode single mode
short-reach 1310 nm, single laser, 1550 nm, laser, 1550 nm,
laser, 850 nm, mode single mode single mode
multimode
Typical Rx LOS -24 -29 -25 -25 < -33 < -28
level (dBm)
Connector LC LC LC LC LC LC
Transmitter type Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional SFP, Bidirectional
1310 nm 1490 nm 1310 nm e 1490 nm 1490 nm SFP, 1590 nm
Average receiver < -21 < -21 < -23 < -23 -26 -26
sensitivity (dBm)
Typical Rx LOS level < -22 < -22 < -24 < -24 < -26 < -26
(dBm)
Connector LC LC LC LC LC LC
Fiber lengths 10 km 10 km 40 km 40 km 80 km 80 km
(9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF) (9 µm SMF)
Parent Topic
4.11 Ethernet Specifications
TRANSMITTER
Spacing (GHz) NA NA NA NA NA NA -
58
Application code is in reference to ITU-T Recommendation G.691.
RECEIVER
Min. Attenuation 5 5 11 0 0 0 -
(dB)
Min. sensitivity (BER -14.1 -14.1 -24 -11 -12.6 -6.5 -22
of 1*10-12)
EOL (dBm)
OPTICAL PATH
BETWEEN S & R
Source type CWDM DFB CWDM DFB CWDM DFB CWDM DFB
59
Application code is in reference to ITU-T Recommendation G.691.
APPLICATION CODE 60 PS AL
TRANSMITTER
Operating wavelength (nm) 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1529.55-1561.61
1611
Modulation - -
60
Application code is in reference to ITU-T Recommendation G.691.
RECEIVER
Parent Topic
4.11 Ethernet Specifications
Connector RJ-45
Parent Topic
4 BG-64 Specifications
NOTE: The suffix xx in the module name designates the distance (nominal compensation
length) in km.
Module name Dispersion [ps/nm] Insertion loss [dB] Application (16ps x nm/Km)
Parent Topic
4 BG-64 Specifications
MXP10 1 Base card for multirate combiner, transponder or ADM on Card supporting 12 CSFP
(6 x SFP) ports of GbE, FC1/2/4, STM-1/4/16/64, OTU1. Supports FEC and EFEC on
the line side.
Parent Topic
4 BG-64 Specifications
OM_AOC4 Optical module for up to 4 x SFP based ports , one module per MXP10 card
OTP10C_PSxx
OTP10D_ALxx
OTP10_AT
OTGBE_LX Optical GbE/FC/FICON transceiver, long reach, 1310 nm single mode fiber
Function/
Card
Description
OTGBE_ZX Optical GbE/FC/FICON transceiver, very long reach, 1550 nm single mode fiber
OTGBE_S3BD Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Short Range (10km)
OTGBE_S5BD Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Short Range (10km)
OTC25_PSxx 2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver
OTC25_ALxx 2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver
OTR25_AVxx DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors
OTR25_ABxx DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors
Parent Topic
4.14 MXP10 Base Card Configurations
Parent Topic
4 BG-64 Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
4.15.3 Timing
Any of the following clock sources can be selected as a timing reference:
Any Dslot (SM_CODIR_4E, SM_V35_V11)
Internal clock source
SDH distributed timing
Two of 32 possible clocks derived from the card’s E1 mappers and framers
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4.15 SM_10E Specifications
4.15.13.1 General
Maximum number of channels per 2
module
Maximum number of channels per 6
card
Maximum number of channels per 18
shelf
Power consumption 3W
Parent Topic
4.15.13 SM_C37.94S Specifications
Parent Topic
4.15.13 SM_C37.94S Specifications
Parent Topic
4.15.13 SM_C37.94S Specifications
Parent Topic
4.15 SM_10E Specifications
Parent Topic
4 BG-64 Specifications
4.17.1 Dimensions (H x W x D)
BG-64 shelf 88.9 mm x 442.4 mm x 243 mm
MCP64 20 mm x 181 mm x 222 mm
XIO64 20 mm x 210 mm x 222 mm
XIO16_4 20 mm x 210 mm x 222 mm
INF-64/INF-64H 31 mm x 76 mm x 222 mm
FCU-6/FCU-64H4 86 mm x 44 mm x 222 mm
BG-30E/EXT-2U shelf 88.9 mm x 443.4 mm x 243 mm
BG-30E/EXT-2U shelf traffic card 26 mm x 283 mm x 222 mm
INF-30E/INF-E2U 26 mm x 111 mm x 222 mm
FCU-30E/FCU-E2U 85 mm x 40 mm x 222 mm
Racks 2200/2600 mm x 600 mm x 300 mm
Parent Topic
4.17 Physical Specifications
4.17.2 Weight
BG-64 fully populated 9 kg
BG-30E fully populated 8 kg
EXT-2U fully populated 8 kg
Parent Topic
4.17 Physical Specifications
4.17.3 Power
Applicable specification ETSI 300 132-2
Input DC voltage -40 VDC to -72 VDC
Nominal DC power source -48 VDC
BG-64 power consumption Maximum 360 W
BG-64 HP (High Power, with INF_64H and Maximum 450 W
FCU_64H)
BG-30E power consumption Maximum 130 W
EXT-2U power consumption Maximum 511 W (including PoE)
Parent Topic
4.17 Physical Specifications
Parent Topic
4.17 Physical Specifications
Parent Topic
4.17 Physical Specifications
Parent Topic
4.17 Physical Specifications
Parent Topic
4.17 Physical Specifications
4.17.8 EMC
Applicable specifications EN 300 386/2000
Applicable directive EMC directive 89/336 EEC
Parent Topic
4.17 Physical Specifications
4.17.9 Safety
Applicable specifications EN 60950/2000
Applicable CE directive LVD directive 73/23/EEC
Parent Topic
4.17 Physical Specifications
Parent Topic
4.17 Physical Specifications
4.17.11 Reliability
4.17.11.1.1 Life
Expected lifetime of the BG-64 15 years
4.17.11.1.2 Availability
Availability of service for an end-to-end better than 99.999%
service
trail passing through a protected SDH network
Parent Topic
4.17 Physical Specifications
Parent Topic
5 Standards and References
ETS 300 462 (Parts 1, 2, 3, 4, 5): Transmission and Multiplexing (TM) - Generic Requirements for
Synchronization Networks; Synchronization Network Architecture; The Control of Jitter and Wander
within Synchronization; Timing Characteristics of Slave Clocks Suitable for Operation in Synchronous
Digital Hierarchy (SDH) Equipment.
ETS 300 746: Transmission and Multiplexing; Synchronous Digital Hierarchy; Network Protection
Schemes; Automatic Protection Switch (APS) Operation.
Parent Topic
5 Standards and References
Parent Topic
5 Standards and References
802.3: IEEE Standard for Information Technology - Telecommunications and Information Exchange
Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier
Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer
Specifications.
802.3ah: Ethernet in the First Mile, Link OAM.
802.3x: Flow Control and Backpressure.
IEEE C37.94: IEEE Standard for N Times 64 Kilobit per Second Optical Fiber Interfaces Between
Teleprotection and Multiplexer Equipment.
IEEE 1588 rev 2.
IEEE 1613: Environmental and Testing Requirements for Communication Networking Devices in
Electric Power Stations (Class B).
Parent Topic
5 Standards and References
Parent Topic
5 Standards and References
Parent Topic
5 Standards and References
Parent Topic
5 Standards and References
Parent Topic
5 Standards and References