Professional Documents
Culture Documents
User Instruction: Warning
User Instruction: Warning
WARNING:
1. Press the "MODE" button to enter the Bluetooth mode. Turn on the device's Bluetooth, search for "EARISE
T29", and click to pair. A beep indicates a successful connection.
2. To adjust the volume of music, you can adjust the master volume knob on the speaker or adjust the volume
on the Bluetooth device.
3. To adjust the volume of the microphone, please press and hold the " " or " " button.
AUX IN
1. There is a "AUX IN" jack on the speaker for the connection of non-bluetooth devices.
2. (Not including cable) One end of the cable is plugged into the "AUX IN" jack, and the other end is connected
to the audio output port of the device, such as a computer, mobile phone and amplifier.
3. The speaker will automatically switch to AUX IN mode. Alternatively, you can switch to the AUX IN mode by
pressing the "MODE" button.
USB
1. Insert a USB flash drive and the speaker will automatically play existing music.
2. The song file format must be MP3.
3. The USB flash drive must have a capacity of 8G to 32G.
4. The USB flash drive must be USB 2.0 and the file system must be FAT32.
5. If the USB flash drive is formatted and the file system is not FAT32, it will not work properly.
TF CARD
1. Insert the TF card and the speaker will automatically play the existing music.
2. The song file format must be MP3.
3. The capacity of the TF card must be 8G to 32G.
4. The file system of the TF card must be FAT32.
REPEAT
1. The repeat function only works with the USB flash drive or TF card inserted. When connect with Bluetooth
or AUX, it doesn’t work.
2. Press the "REP" button to put the current song on a loop.
RECORD
1. Insert the TF card or USB flash drive, the speaker will automatically switch to USB / TF mode.
2. Before recording, make sure that you have sufficient recording storage space.
3. Please make sure there is at least one song in the TF card or USB flash drive, otherwise the recording
function will not work.
4. Press and hold the "REC" button to start recording.
5. Press the "REC" button to pause or resume recording.
6. Press and hold the "REC" button again to complete the recording.
7. After recording, press the "REC" button to listen to the recorded file.
8. Deleting a recording file: When playing a recording file, press and hold the "MODE" button to delete the
current recording file.
9. The recording file format is MP3.
10. Please note that it cannot play music in recording mode.
11. When using the Bluetooth or AUX function, the recording function does not work.
THE MICROPHONE
Key Function
① Power Switch Turn on/off the microphone.
② EQ1 Built-in 6 background sound effects, the default sound effect is applause. Press
this button to play the sound effect. Press and hold the button for 2s to switch
among 6 sound effects.
③ EQ2 Also built-in 6 background sound effects which are different from EQ1. The
default sound effect is laughter. The operation is the same as EQ1.
④ Voice Changer Press this button to voice effects, the order is original voice, male to female,
female to male, monster and shrill voice. There will be a beep every time you
switch.
Volume Press and hold the " " or " " button to adjust the volume of microphones.
Echo When the microphone is connected, the reverb is default on, press and hold the
"MODE" button to turn on/off the reverb.
THE REMOTE CONTROL
Key Function
STBY Standby
VOL+ Volume up
MODE Switch mode: Bluetooth, USB, TF, AUX In. Press and hold to turn on/off the reverb.
Play/Pause
Previous song
Next song
VOL- Volume down
Backtrack
0~9 When playing music via USB flash drive or TF card, you can select the song you want quickly.
For example, you need to select the 258th song, you need to press the "2", "5", "8" three butto
ns in sequence and wait for 1 second, then it will automatically switch to the 258th song.
CHARGING INSTRUCTION
1. Use the included USB cable to charge the speaker. One end of the USB cable is connected to the USB 5V
charging port on the speaker and the other end is connected to the power outlet. (The adapter is not
included)
2. During charging, the charging indicator lights up and turns off when fully charged.
3. When using for the first time, the charging time should not be less than 12 hours.
SPECIFICATION
Power Output: 6W
Frequency: 90Hz-20KHz
Speaker Unit: 4"2Ω*1
S/N Ratio: ≥60dB
Power Input: USB 5V
Dimension: 11.3” x 5.3” x 11.4”
WARRANTY
EARISE guarantees one and a half years warranty and 60 days hassle-free return. We provides lifetime technical
support. Please reach us via support@earise.cn.