Professional Documents
Culture Documents
Index
Page
1 Print Specification index.
2 Description of the PRINT Specification, Scope, Imprinting and Approved Label Source.
3 Illustrations of the part nomenclature formats that must be followed for Ford and Motorcraft branded labels.
4 Description of the MASTERPACK part nomenclature label.
5 Illustrates the Ford MASTERPACK Carton Label format.
6 Illustrates the Motorcraft MASTERPACK Carton Label format.
7 Illustrates the SELL PACK Carton Label format, placement and I 2 of 5 bar code placement.
8 Ford, Motorcraft, ML2000, and MASTERPACK/SELL PACK Imprint Size Font Table.
9 Ford and Motorcraft Plain Label Imprint Size Font Table.
10 Ford and Motorcraft Poly Bag Imprint Size Font Table.
11 - 12 Bar Code 39 Sizing Table.
13 - 18 Illustrates the standard Ford and Motorcraft part nomenclature labels in the actual label size (F-MFLSER) and (L26/ML26).
19 - 21 Illustrates the ML2000 Motorcraft Tri-Language Series Direct Ship Labels.
22 - 33 Illustrates the Ford and Motorcraft Plain Labels L1 - L11 (F-MFLSER).
34 - 50 Illustrates the Ford and Motorcraft Decorative Folding Cartons Plain Label Placement (F-MFSER).
51 Illustrates the Corrugated Carton Part Nomenclature and Bar Code placement.
52 - 64 Illustrates the Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code placement (F-MFPOLY).
65 Illustrates the Cohesive Pouch Imprint Nomenclature and Bar Code placement (1675).
66 Illustrates the Large Poly Bag Part Nomenclature and Bar Code placement (PB1).
67 - 68 Illustrates the Tape Identification Part Nomenclature and Bar Code placement (L26/ML26).
69 Revision statements.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
SCOPE: This packaging material specification describes the Ford Customer Service Division (FCSD) general use requirements for quality and
legibility of part nomenclature printing and label placement on unit packages and masterpacks. Instructions have been modified with
introduction of bar codes (3 of 9 or UPC), revised label graphics and carton graphics. Ford brand unit packaging requires a 3 of 9 bar code
(reference L1569 FCSD Package Material Specification and bar code sizing table on pages 11 and 12). It is preferred that the 3 of 9 bar code
be centered left to right on label as illustrated on page 3. Motorcraft brand unit packaging requires a UPC symbol (reference L1522 FCSD
Package Material Specification).
A section of this “PRINT” specification is the Motorcraft ML2000 Series trilingual label (reference FCSD Package Material Specification
ML2000) specified exclusively for program supplier dealer and Ford Authorized Distributor (FAD) direct ship product lines, as directed by the
Marketing and Procurement activities. Refer to pages 19 - 21. Normal depot stocked parts require the standard Ford and Motorcraft 47, 1190,
1192, 1193, 1194 Label Series Identification (reference FCSD Package Material Specification F-MFLSER) refer to pages 15 - 18.
IMPRINTING: Refer to the Imprint Size Font Table on pages 8 - 10 for the required sizes of all the different data elements of the part nomenclature,
which must be printed in black ink. All fonts are ARIAL NARROW except SALES PART NUMBER and SERVICE PART NUMBER and the word
MASTERPACK are ARIAL NARROW BOLD. SERVICE PART NUMBER must include dashes separating the part number PREFIX-BASE-SUFFIX. The part
name displayed on the unit container's part nomenclature label must exactly match the part name shown on the Part's Packaging
Specification. Packaging Specitfication Change Request Forms must be submitted for any part name changes. Part names are
not displayed on Tape Identified Part Labels (L26/ML26) or on Masterpack Labels or on Sell Pack Labels. The Imprint Size Font Table has
been designed to fully utilize the available print area on each label, and it is the responsibility of the service parts packager to adhere to this
table without variation. Font sizes referred to on pages 10 -12 are based on 72 points per inch.
Plain packaging materials (corrugated cartons or PB Series poly bags) require the application of graphic part nomenclature labels. Refer
to the FCSD Standard Carton Listing in the FCSD Packaging Information web site (http://web.pkginfo.ford.com) for faster label selection.
Graphic printed decorative folding cartons (F-MFSER), and EA/MEA Series poly bags (F-MFPOLY) can display the part nomenclature
either by direct imprint (preferred) or by application of a plain white label (L1 - L11 series) contained in the F-MFLSER Package
Material Specification. It is the responsibility of the packager to assure the labels are legible, applied to the package uniformly and squarely,
adhere firmly to the package material and bar codes scan at acceptable levels. Tape identified parts, which require the L26/ML26 label
(reference L26/ML26 FCSD Package Material Specification) do not require the quantity or part name in the nomenclature refer to pages 69 - 70.
Note: Packaging Material Specifications are located on the FCSD Packaging Information web site at http://web.pkginfo.ford.com.
Unit Container Part Nomenclature Label
LABEL SELECTION:Refer to the FCSD Standard Carton Listing (located on the FCSD Packaging Information web site at http://web.pkginfo.ford.com).
UNIT PACKAGE:
Imprinted Information
1. Unit of Issue* per FCSD Packaging Specification
*Note: If unit of issue is greater
2. Service Part Number
than one, use the
3. Part Name exactly as appears on FCSD
following:
Packaging Specification ONE PKG OF ** PCS
4. Country of Origin if applicable,
minimum 7 point size (Reference L1287) 2 **Quantity in numerals
****Note on this page.
3
5. Supplier Code (required) ***Note: Date code is in month,
6. Work Order Number (required for Contract 4 8
day, year format without
Packagers, optional for other packagers), 5 6 7
dashes (i.e.) 012411
Industry Number/Standard Parts Locator Code This is the date the part
(if applicable) in minimum 7 point size is packaged.
7. Date Code*** (required) date part is packaged
8. 3 of 9 Bar Code (required, centered). Refer to Note: The Motorcraft ML2000
pages 13 - 14 for bar code sizing. Series Direct Ship
Tri-Language label has
Imprinted Information a unique reduced
imprint size ratio for
1. Unit of Issue* per FCSD Packaging Specification
2. Sales Part Number the quantity and part
3. Service Part Number name lines due to
4. Part Name exactly as appears on FCSD the space required for
Packaging Specification 3 languages. See point
5. Country of Origin if applicable, minimum 7 point size layout on page 8 and
size (Reference L1287) ****Note on this page examples on pages
2 19 - 21.
6. Supplier Code (required)
7. Work Order Number (required for Contract 3 9
Packagers, optional for other packagers), ****Note: If a deviation specification
4
Industry Number/Standard Parts Locator Code 5 is issued, print the word
(if applicable) in minimum 7 point size 7 “deviation” or “dev” #____
6
8. Date Code*** (required) date part is packaged as applicable on the last
9. UPC Bar Code (required) (100% nominal size or line in the part
80% when space is limited) nomenclature label.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
PA
may not always be in the specified masterpack quantity multiples. When this occurs, the residual
R TI
AL
end-of-release odd lot quantity can be packaged in the specified masterpack, or otherwise appropriately ST
OP
PARTIA PART
The end-of-release masterpack quantity must be appropriately modified with a heavy ink marker as illustrated
to show the change from the standard masterpack quantity to the actual quantity in the container. This change ER
20
04
WM85-551750-AB
MASCTK
030105
20
-504
-1750
F6E5Z
must be neat and legible. All partial masterpacks will be sealed with a 2” wide clear plastic tape (3M PA
AF30
W5M08551
B
750-A0105
Specification #375). The tape is repetitively printed in red with the word “partial” and a standard vehicle 65Z-1
7
03
stop sign (see illustration), and can be purchased from Whitlam Label Company, 24800 Sherwood Ave., 0E
Center Line, MI., Ph: (586) 757-5100. This special identified and sealed masterpack should be placed on the
pallet in a location that is readily visible to shipping and receiving activities.
3"
1-1/4"
4-5/8"
6-1/2"
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Note: The 3 of 9 barcode displayed on Masterpack carton labels for Motorcraft Branded parts is always the Ford Service part number and not
the Motorcraft Sales part number.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Typical Sell Pack Label for Spark Plugs Typical Sell Pack Label for Wiper Blades
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 6-8-12
WM-504
F65Z-17508-AB
MADE IN JAPAN
B969F 072405
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 WLC Designed, engineered and recommended
PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY ■ ML26 REV 8/04 by Ford Motor Company.
Motorcraft® is a registered trademark of Ford Motor Company.
L26C
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 ■ PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 ■ PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 ■ PRINTED IN U.S.A. © 2004, FORD
Conforms to Federal Motor Vehicle Safety Standards, if any are applicable. ■ L26C REV 8/04.../......... Conforms to Federal Motor Vehicle Safety Standards, if any are applicable. ■ L26C REV 8/04.../......... Conforms to Federal Motor Vehicle Safety Standards, if any are applicable. ■ L26C RE
ML26C
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
L26W1
ML26W1
WM-504
F65Z-17508-AB
MADE IN JAPAN
B969F 072405
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 WLC Designed, engineered and recommended
PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY ■ ML26W1 REV 8/04 by Ford Motor Company.
Motorcraft® is a registered trademark of Ford Motor Company.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORM: FPS 8066-P PRINTED COPIES ARE UNCONTROLLED REVISION: 1.1
PAGE: 1 OF _ DATE: 6/1/06
Printing Instructions and Label
Package Material Specifications Page 15 of 69 Placement Guide (General Use) PRINT
No.
L1190 ML1190
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
L47 ML47
ONE
E90Y-5445422222-A2P
COVER
CONTENTS MADE IN MEXICO
B969F 072405
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORM: FPS 8066-P PRINTED COPIES ARE UNCONTROLLED REVISION: 1.1
PAGE: 1 OF _ DATE: 6/1/06
Printing Instructions and Label
Package Material Specifications Page 17 of 69 Placement Guide (General Use) PRINT
No.
Ford and Motorcraft Label Examples
(Actual label and font size shown)
L1192 ML1192
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
L1194/L1194S ML1194
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
ML2000A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
ML2000B ML2000C
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
ML2000F ML2000G
Contents conform to U. S. Federal Motor Vehicle Safety
Standards, if any are applicable.
Le contenu est conforme aux normes fédérales des É.-U.
de sécurité des véhicules éventuellement applicables.
El contenido satisface las normas federales de seguridad
para los vehículos motorizados de los EE. UU.
de A., si algunas de las normas aplican.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Note: Refer to Package Material Specification Note: In all cases the label must be placed on a flat
F-MFLSER for the approved plain labels surface of the carton to insure bar code scanability.
(L1 - L10 series) and to F-MFSER for which Flat application of bar codes applicable to Option 2.
of those labels to apply on each folding carton.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Decorative Folding Carton Part Nomenclature and Bar Code Placement (continued)
Actual label and font size shown. Bar code shown for position only,
for actual bar code sizing refer to bar code 39 sizing table on page 11 - 12.
Option 3: Option 4:
Ford or Motorcraft Cartons Ford or Motorcraft Cartons
Part number data printed on one label and Part number and bar code information printed directly on
applied to end flap. Bar code printed on carton and in the same font and point size as the imprint label
second label and applied to major panel. number specified for the affected carton number.
ONE
4454 22-A2P O
E90Y-5
R XIC 102802
COVE IN ME
NTS MADE
CONTE
B969F
5Z-1750MOTOR
F6 WIPER IN MEXI
MADE 6
CO 072400
ENTS 12345
CONT
B969F
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
80 FORD CARTON
USING L6 LABEL
WRAP AROUND STYLE
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Printing Instructions and Label
Package Material Specifications Page 39 of 69 Placement Guide (General Use) PRINT
No.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
ONE 22-A2P
-54454
E90Y COVER E IN MEXIC 102802
O
MAD
ENTS
CONT
B969F
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 n PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY n 125 REV 8/04
Contents Conform to Federal Motor Vehicle Safety Standards, if any are applicable.
WLC
D L5
FCS
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
ndedny.
comme mpa
and re tor Co
gineerebyd Ford Mo
ned, en
Desig
ONE
-5024-A2P
Contents conform to Federal Motor Vehicle Safety Standards,
WM 2
4454 R
90Y-5
PRINTED IN USA © 2004, FORD MOTOR COMPANY n MF149 REV 8/04
OTO ICO
C
WL
Motorcraft ®is a registered trademark of Ford Motor Company.
02 L4
E ER M MEX 1028
if any are applicable.
FCSD
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121
WIP MADE IN
ENTS
CONT
F
B969
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
C
WL
L1
FCSD
Des
igne
b d, e
ineey Ford ng
red M
and otor C
rec omp
omm a
endny.
ed
Contents conform to Federal Motor Vehicle Safety Standards, if any are applicable.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORM: FPS 8066-P PRINTED COPIES ARE UNCONTROLLED REVISION: 1.1
PAGE: 1 OF _ DATE: 6/1/06
Printing Instructions and Label
Package Material Specifications Page 49 of 69 Placement Guide (General Use) PRINT
No.
ONE 2-A2P
4454VE2 R MEXICO
E90Y-5 102802 048-AB
W5MZ-5
CO ONE
DE IN
-1750MOTOR
MA
ENTS
CONT 072400
F6
XICO
WIP ER MADE IN ME
B696F CONTEN
TS
123456
B969F
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121
PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY
1
NY 12
PA
M N 48
CO GA
OR HI
OT IC
M ,M
RDBORN
, FOAR
04, DE
04© 20NY
V 8/ A PA
RE USCOM
400 REV 8/04
00 IN
F4 D OR
M INTEMOT
PRRD
FO
le. cle
ab hi
plicor
Ve
e lap
M
ot
C y arra
WL an de
L4
if Fe
s,
FCSD
rd to
da m
an nfor C
St co WL
L4
ty
fe ts
Santen
FCSD
Co
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORM: FPS 8066-P PRINTED COPIES ARE UNCONTROLLED REVISION: 1.1
PAGE: 1 OF _ DATE: 6/1/06
Printing Instructions and Label
Package Material Specifications Page 50 of 69 Placement Guide (General Use) PRINT
No.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E3A ME3A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E3AS ME3AS
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E8A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
ME8A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E10AS
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E20A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E23A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E24A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E25A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E28AC
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
ME31A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
ME32A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
Ford and Motorcraft Poly Bag Imprint Part Nomenclature and Bar Code Placement
E34A
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-11 8-28-15
Large Poly Bag (PB1 Series) Part Nomenclature and Bar Code Placement
Actual label and font size shown. Bar code shown for position only,
for actual bar code sizing refer to bar code 39 sizing table on page 11 - 12.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
WM-504
F65Z-17508-AB
MADE IN MEXICO
B969F 072405
FORD MOTOR COMPANY, DEARBORN, MICHIGAN 48121 WLC Designed, engineered and recommended
PRINTED IN U.S.A. © 2004, FORD MOTOR COMPANY ML26 REV 8/04 by Ford Motor Company.
Motorcraft is a registered trademark of Ford Motor Company.
®
Note: In all cases the label must be placed on a flat surface of Note: Continuous tape ML-26C flagged around the part showing the
the part to insure bar code scanability. Flat application of full bar code on the tail of the tape. Locate tape consistently
bar codes applicable to both Ford and Motorcraft. approximately 3” from either part end. Tape must be applied to
part so no adhesive is showing. Reduced size examples.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15
8-28-15 (KLD) Added statement to second note on page 51" Select the largest label size that will fit on the smallest container panel". Defined Ford and Motorcraft labels for Masterpack and
Sell Pack font table on page 8.
6-8-12 (KLD) Revised L1193 barcode characters on page 12.
7-11-11 (KLD) Added date code statement, "date part is packaged" to page 3. Added note at the bottom of page 6 that Masterpack label barcode on Motorcraft branded parts is always the
Ford Service part number.
4-25-11 (KLD) Added label application for Poly Bags to Bar Code 39 sizing table.
3-30-11 (KLD) Added Industry Number/Standard Parts Locator Code requirement, Removed size ratio (X) formula, added Ford branded Masterpack requirement and illustrations. Adjusted
font sizing table for Masterpack/Sell Pack to accommodate bar codes, added Bar Code 39 Sizing Table. Added page headings to reference bar code 39 sizing table.
Ford 291 carton label orientation revised. Removed all Heavy Duty "H" decorative folding cartons due to consolidation.
4-26-10 (KLD) Revised requirement on page 3. Part name should be printed exactly as it appears on FCSD Packaging Specification. Added note under MASTERPACK on page 4.
10-15-09 (KLD) Added deviation note on page 3.
5-18-09 (KLD) Revised verbiage on L26/ML26 labels from CONTENTS MADE IN to MADE IN on pages 9, 10 and 66.
5-6-09 (KLD) Added requirement that the part name printed on the part nomenclature label must exactly match the part name shown on the part's specification. Refer to pages 2 and 3.
7-30-07 (KLD) Corrected odd lot residual partial masterpack illustration.
6-28-07 (GPL) Added requirement for Contract Packagers to print work order number as a part of part nomenclature.
3-21-06 (DVB) Added new Sell Pack label verbiage. Corrected remanufacture of w/att’g parts statements within font tables.
10-26-05 (DVB) Revised 400 and MF400 carton graphics to include white-out panel for bar code.
7-12-05 (DCM) Revised all Ford and Motorcraft graphics for all branded packaging materials. Added plain label placement illustrations for decorative cartons. Added additional font tables for
Ford and Motorcraft plain labels, MASTERPACK labels and poly bags.
7-15-04 (KLG) Revised Unit Package Information and Font Tables on pages 2 and 3. Added footnote on page 3.
7-14-03 (DCM) Added statement to Imprinting requirements regarding plain labels on pre-branded packaging materials.
6-6-03 (DVB) Removed ML2000E and reformatted ML2000A, B, C, D, F and G.
5-16-03 (DVB) Added ML2000G label font sizes and illustration.
12-9-02 (JRH) Added plain labels and poly bag font sizes and examples.
10-28-02 (JRH) Clarified page 2 unit package imprint work order number as optional and date code required.
7-2-02 (JRH/DVB) Added Imprint Size Font Tables and ML2000 Series Motorcraft label nomenclature examples.
10-22-01 (JRH/DVB) Revised graphics, Motorcraft UPC bar code layout and added dashes in part number requirement.
1-15-01 (DVB) Revised Master Carton Label information.
FORD MOTOR COMPANY, PACKAGING ENGINEERING, FORD CUSTOMER SERVICE DIVISION, 16800 EXECUTIVE PLAZA DRIVE, DEARBORN, MICHIGAN 48126
Designed Approved Date Revised
JWS W. F. Schmude 10-18-00 8-28-15