Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

BRABUS D6 (III)

Base:
C 320 CDI (W 204)
CLK 320 CDI (W 209)
CLS 320 CDI (C 219)
G 320 CDI (W 463)
GL 320 CDI (X 164)
ML 320 CDI (W 164)
R 320 CDI (W 251)

The D6 (III) kit consists of a processor controlled additional unit for the engine management. It gets
connected to the original wiring by the delivered plug & play wiring harness. The kit is ready to start
out of the box and due to the plug & play system the installation can be done very easily. (Labour time
for installation approx. 30 min)

Technical data:

Displacement cm2 2987


Bore/stroke mm 83,0/92,0
Compression ratio 18,0 : 1
Torque Nm 590 (510)
At min-1 1600-2800
Power output KW/HP 200/272 (165/224)
At min-1 3800

Performance:

Acceleration

0-100 km/h s 6,5 (7,3)* (Figures for C 320 CDI)

Top speed

Vmax: 250 (250) km/h* (Figures for C 320 CDI)

* All listed performance figures are approximate values. They depend on vehicle-specific details such as vehicle-type,
equipment, tare weight, rear axle ratio, wheel-tire combination, transmission type and aerodynamic equipment of the specific
car.

You might also like