Professional Documents
Culture Documents
Oral Questioning Tool
Oral Questioning Tool
Safety Questions
1. Can you give at least three personal protective
equipment necessary in tile setting and how to use it.
2. Identify safety and quality requirements in line with
Occupational Safety and Health Standards (OSHS)
3. What will you do if someone in your workmates
accidentally cut himself?
4. How will you ensure you are complying with OSHS
while working?
Contingency Questions
1. What will you do if you noticed that the miter cut you
will doing is no longer uniform?
Extension/Reflection Questions
1. Approach your supervisor and ask for the work instruction. As the
work instruction was given to you, you can jot it down to your book or
notes. Or if the work instruction was in written form, you can secure
it to a safe storage area. Then Look at it and identify the salient part
of the work instruction. If there are unclear features, ask your
supervisor for clarification.
2. The work instruction is based to the clientele’s request following rules
and laws related to building and construction. Therefore, anchoring
your work plan to work instruction will ensure that you are doing the
right thing and making your future work strong and stable.
3. Approach the area, assess it and have an ocular visit.
4. Prepare all the tools and materials needed then wear PPE. After that
proceed in lay-outing by starting on determining the highest surface.
5. Right tools and materials to be used and proper mixture of the dry
pack.
6. Ply wood, cementitious, polymer based
7. Use right tool for mixing tile adhesive, then with the use of notched
trowel, spread it in the surface where the tile will be installed. Used
rubber mallet to ensure that surfaces are properly aligned.
8. Alignment, mixture of tile adhesive, right tools and, materials, safety
and health of the worker.
9. Use the right tile cutter in cutting. Remove excess parts if there is.
10. Assess the working area and input all the necessary information and
make sure to double check it before submitting to the concern
personnel.
Safety Questions
1. Safety goggles – to protect the eyes from splashes of chemicals. Put
it in your eyes.
Face mask – put it in your face covering the nose, mouth and chin.
To protect the nose, from inhaling dangerous substances. And to
protect the mouth and part of the face on getting dirt.
Safety gloves – wear it in the hands to avoid skin burns, and cuts.
High visibility vest – wear it in your body for you to be easily seen
by your workmates.
Knee pads – put it in the knees to protect it from sand and
pebbles.
Contingency Questions
2. Apply grout remover and remove the grout using grout rake. After
that, brush it and use hot water.
4. With the use of 5S, the working are became safe and good for working
making the workers productive. And with the use of 3Rs, we can help
the environment be sustainable.
5. Always be aware of the pattern. In this case, you may first discover
the pattern by laying the tiles in any surface before laying it to the
designated place.
6. Put a tile adhesive in the surface, make the tile wet, then install it
using a level bar.