Professional Documents
Culture Documents
Tf21ipt Pga01 B Dapt4y5
Tf21ipt Pga01 B Dapt4y5
Controller
3
LINE (A Side)
3
HLT FL HLT FL
to the devices. 50 50
COLD COLD
LOAD HCL 50BF LOAD HCL 50BF
PICKUP TCL PICKUP TCL
1 1
eFS 79 79
74TC 74TC
52 74CC 52 74CC
25 25
1 3 27 59
www.ingeteam.com
powergridautomation@ingeteam.com
Overview
Tests Main features
The technical data in this document is subject to change without prior notice. FTF21IPT_PGA01_B/092022
measurement IEC 60255-27
∙ Voltage impulse IEC 60255-27 ∙ Wide range current inputs allowing the same device to be connected to 1A and 5A CT secondary
∙ Electrostatic discharge immunity IEC 61000-4-2 ∙ Sensor voltage inputs or conventional transformers
∙ Radiated radiofrequency ∙ User logic signals according to the IEC 61131-3 standard
electromagnetic field immunity IEC 61000-4-3 ∙ Different options for programmable digital inputs and outputs number
∙ Electrical fast transient / ∙ Local signaling through programmable LED indicators
burst immunity IEC 61000-4-4
∙ Circuit breaker and operation monitor
∙ Surge immunity IEC 61000-4-5
∙ Fault Passover Detection (FPD)
∙ Immunity to conducted
disturbances, induced by ∙ Fault location
radiofrequency fields IEC 61000-4-6
∙ Faults and events recording
∙ Power frequency magnetic
field immunity IEC 61000-4-8
∙ Automatic reclosing function, for application in overhead lines
∙ Impulse magnetic field immunity IEC 61000-4-9
∙ Secure access using password
∙ Damped oscillatory magnetic
field immunity IEC 61000-4-10
∙ Immunity to conducted, common Options
mode disturbances IEC 61000-4-16
∙ Ripple on DC input power port IEC 61000-4-17
∙ With display, for flush mounting or without display, for back plate surface mounting
∙ Damped oscillatory wave
immunity IEC 61000-4-18 ∙ Supply voltage: 24/48 Vdc
∙ Voltage dips, short interruptions ∙ Voltage inputs from Voltage transformers or from sensors / resistive or capacitive dividers
and voltage variations immunity IEC 61000-4-29
∙ Optional 7V sensor inputs with Loop Automation function (only DA PT5)
∙ Withstand to radiated
electromagnetic interference
∙ PRP/HSR redundant communications
from transceivers IEEE 37.90.2
Climatic Applications
∙ Cold IEC 60068-2-1
∙ Dry heat IEC 60068-2-2
∙ Reclosers management
∙ Change of temperature IEC 60068-2-14
∙ Load Break Switches management
∙ Damp heat cyclic IEC 60068-2-30
∙ Damp heat steady IEC 60068-2-78
∙ External protection level IEC 60529
Mechanical
∙ Vibrations IEC 60255-21-1
∙ Shock and bump IEC 60255-21-2
∙ Seismic IEC 60255-21-3
∙ Random vibrations IEC 60068-2-64
www.ingeteam.com
powergridautomation@ingeteam.com