Professional Documents
Culture Documents
SJ-20120319104909-013-ZXUR 9000 UMTS (V4.11.20) MML Command Reference
SJ-20120319104909-013-ZXUR 9000 UMTS (V4.11.20) MML Command Reference
Version: V4.11.20
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
I
2.2.11 BLK ATERPCM .................................................................................... 2-28
2.2.12 BLK ATERTRUNK ................................................................................ 2-29
2.2.13 BLK ATRUNK....................................................................................... 2-31
2.2.14 BLK BVC ............................................................................................. 2-32
2.2.15 BLK CELL............................................................................................ 2-33
2.2.16 BLK CUTRX......................................................................................... 2-34
2.2.17 BLK FUTRX ......................................................................................... 2-35
2.2.18 BLK IPA ............................................................................................... 2-36
2.2.19 BLK NSVC........................................................................................... 2-37
2.2.20 BLK TS................................................................................................ 2-38
2.2.21 BTS ACTIVE VERSION ........................................................................ 2-39
2.2.22 BTS ADD VERSION ............................................................................. 2-41
2.2.23 BTS DELETE VERSION ....................................................................... 2-41
2.2.24 BTS DOWNLOAD VERSION ................................................................ 2-42
2.2.25 BTS QUERY ALLPKG .......................................................................... 2-43
2.2.26 BTS QUERY COMMPKG...................................................................... 2-44
2.2.27 BTS QUERY SPECPKG ....................................................................... 2-45
2.2.28 BTS QUERY VERFILE ......................................................................... 2-46
2.2.29 BTS SPECACTIVE VERSION............................................................... 2-47
2.2.30 BTS SPECDEACTIVE VERSION .......................................................... 2-48
2.2.31 BTS UPDATE VERSION....................................................................... 2-50
2.3 C..................................................................................................................... 2-51
2.3.1 CHECK LICENSE .................................................................................. 2-51
2.3.2 CHG CELLTOSLAVE.............................................................................. 2-52
2.3.3 CHK RESOURCE .................................................................................. 2-53
2.3.4 CLEAR ALARM...................................................................................... 2-54
2.3.5 CMIMPORT ........................................................................................... 2-55
2.3.6 CONFIRM VERSION.............................................................................. 2-55
2.3.7 COPY.................................................................................................... 2-56
2.3.8 CREATE ................................................................................................ 2-58
2.3.9 CREATE VERSION ................................................................................ 2-59
2.4 D..................................................................................................................... 2-60
2.4.1 DEACTIVE VERSION............................................................................. 2-60
2.4.2 DEBUG MODE ...................................................................................... 2-61
2.4.3 DELETE ................................................................................................ 2-61
2.4.4 DELETE VERSION ................................................................................ 2-62
2.4.5 DEL POLICY ......................................................................................... 2-63
II
2.4.6 DEL TASK ............................................................................................. 2-64
2.4.7 DISPLAY RESULT ................................................................................. 2-65
2.5 E ..................................................................................................................... 2-65
2.5.1 EQP APCM............................................................................................ 2-65
2.5.2 EQP ARESPCM..................................................................................... 2-66
2.5.3 EQP ATERPCM ..................................................................................... 2-67
2.5.4 EXECUTE POLICY INSTANTLY ............................................................. 2-68
2.5.5 EXPORT ............................................................................................... 2-69
2.6 F ..................................................................................................................... 2-70
2.6.1 FRESH LICENSE................................................................................... 2-70
2.7 G..................................................................................................................... 2-71
2.7.1 GET BOOT ............................................................................................ 2-71
2.7.2 GETCMDLOG........................................................................................ 2-72
2.7.3 GET COUNTER ..................................................................................... 2-74
2.7.4 GETCPURATIO ..................................................................................... 2-75
2.7.5 GETDBRATIO........................................................................................ 2-76
2.7.6 GET EAMSTATUSRPT........................................................................... 2-77
2.7.7 GET EMSRM ......................................................................................... 2-77
2.7.8 GETHDUSAGE...................................................................................... 2-78
2.7.9 GETHDUSAGEBYNAME........................................................................ 2-79
2.7.10 GET LICENSE ..................................................................................... 2-80
2.7.11 GET MEASOBJ.................................................................................... 2-81
2.7.12 GET MEASOBJTYPE ........................................................................... 2-82
2.7.13 GET MEASTYPE ................................................................................. 2-82
2.7.14 GET NELOC ........................................................................................ 2-83
2.7.15 GET PARAM ........................................................................................ 2-84
2.7.16 GETRAMUSAGE ................................................................................. 2-85
2.7.17 GETSECLOG....................................................................................... 2-86
2.7.18 GET SITEMS ....................................................................................... 2-88
2.7.19 GETSYSLOG....................................................................................... 2-89
2.7.20 GET TASKLIST .................................................................................... 2-90
2.7.21 GET TYPELIST.................................................................................... 2-91
2.8 I ...................................................................................................................... 2-93
2.8.1 IMPORT ................................................................................................ 2-93
2.9 K ..................................................................................................................... 2-94
2.9.1 KILL IPA ................................................................................................ 2-94
2.9.2 KILLMSG............................................................................................... 2-95
III
2.9.3 KILL MUTEXRIGHT ............................................................................... 2-95
2.10 L ................................................................................................................... 2-96
2.10.1 LSN IMSI ............................................................................................. 2-96
2.11 M................................................................................................................... 2-97
2.11.1 MAN BCCHEX ..................................................................................... 2-97
2.11.2 MAN FORCHANDOVER ....................................................................... 2-98
2.12 N ..................................................................................................................2-100
2.12.1 NORMAL MODE .................................................................................2-100
2.12.2 NTP SYNC .........................................................................................2-100
2.13 O..................................................................................................................2-101
2.13.1 OBSERVE CELLCHANNEL .................................................................2-101
2.13.2 OBSERVE IUBLINK ............................................................................2-102
2.13.3 OBSERVE UTRANCELLFDD...............................................................2-103
2.13.4 OMMBACKUP ....................................................................................2-104
2.13.5 OMM CMD..........................................................................................2-105
2.13.6 OMMRREPORT ..................................................................................2-106
2.13.7 OMMRSYNC ......................................................................................2-107
2.13.8 OPERATE DDM ..................................................................................2-108
2.14 Q..................................................................................................................2-109
2.14.1 QRY ABIS...........................................................................................2-109
2.14.2 QRY ABISDEV.................................................................................... 2-110
2.14.3 QRY ABISUSE.................................................................................... 2-111
2.14.4 QRY ACL4 ALL TABLE........................................................................ 2-112
2.14.5 QRY ACL4 GROUP............................................................................. 2-113
2.14.6 QRY ACL4 SPECIFIC TABLE .............................................................. 2-114
2.14.7 QRY AH IF EPU .................................................................................. 2-116
2.14.8 QRY AH IF RPU.................................................................................. 2-117
2.14.9 QRY ALCAP DATA .............................................................................. 2-118
2.14.10 QRY ALL BLOCK RUP UNIT .............................................................2-120
2.14.11 QRY ALL BLOCK SLAVE SUNIT ........................................................2-121
2.14.12 QRY ALLLINK STATUS .....................................................................2-122
2.14.13 QRY APCM.......................................................................................2-122
2.14.14 QRY ARESPCM................................................................................2-123
2.14.15 QRY ARESTRUNK............................................................................2-124
2.14.16 QRY ARP PORT ...............................................................................2-125
2.14.17 QRY ARP STATIC .............................................................................2-127
2.14.18 QRY ASPSTATUS .............................................................................2-128
IV
2.14.19 QRY ASSTATUS ...............................................................................2-129
2.14.20 QRY ATERPCM ................................................................................2-130
2.14.21 QRY ATERTRUNK ............................................................................2-131
2.14.22 QRY ATRUNK ...................................................................................2-133
2.14.23 QRY BATCHASPSTATUS ..................................................................2-134
2.14.24 QRY BATCHASSTATUS ....................................................................2-134
2.14.25 QRY BATH QUERY GROUP STATE...................................................2-135
2.14.26 QRY BATH QUERY LINK STATE .......................................................2-136
2.14.27 QRY BATH QUERY TC STATE ..........................................................2-138
2.14.28 QRY BFD BRIEF EPU .......................................................................2-139
2.14.29 QRY BFD BRIEF RPU .......................................................................2-141
2.14.30 QRY BFD CHANGOVER PORT EPU .................................................2-142
2.14.31 QRY BFD DAMP RPU .......................................................................2-143
2.14.32 QRY BFD DETAIL EPU......................................................................2-144
2.14.33 QRY BFD DETAIL RPU .....................................................................2-147
2.14.34 QRY BOARDINFO ............................................................................2-150
2.14.35 QRY BVC .........................................................................................2-151
2.14.36 QRY CEID STATUS...........................................................................2-152
2.14.37 QRY CEID STATUS ALL ....................................................................2-153
2.14.38 QRY CELL ........................................................................................2-154
2.14.39 QRY CELLSBYSLAVE.......................................................................2-155
2.14.40 QRY CHANINCELL ...........................................................................2-156
2.14.41 QRY CHANINMODULE .....................................................................2-157
2.14.42 QRY CONNBYIMSI ...........................................................................2-158
2.14.43 QRY CONNBYTS..............................................................................2-159
2.14.44 QRY CPUUSERATE..........................................................................2-160
2.14.45 QRY DHCP CLIENT INFO .................................................................2-161
2.14.46 QRY DISK.........................................................................................2-162
2.14.47 QRY DPISTATUS ..............................................................................2-164
2.14.48 QRY DRPATTRIBUTE .......................................................................2-165
2.14.49 QRY EAM .........................................................................................2-166
2.14.50 QRY ENDPOINT ...............................................................................2-166
2.14.51 QRY EPU INTERFACE......................................................................2-167
2.14.52 QRY EPU ROUTE .............................................................................2-169
2.14.53 QRY ETHOAM DISC .........................................................................2-171
2.14.54 QRY ETHOAM LINKMONI .................................................................2-173
2.14.55 QRY ETHOAM STATICS....................................................................2-176
V
2.14.56 QRY FREQUENCY ...........................................................................2-178
2.14.57 QRY GET IMAGROUP TEST RESULT ...............................................2-179
2.14.58 QRY GPSSTATUS.............................................................................2-181
2.14.59 QRY HARDVERINFO ........................................................................2-182
2.14.60 QRY IMAGRP STATUS......................................................................2-184
2.14.61 QRY IMALINK STATE........................................................................2-185
2.14.62 QRY IMSILCLS .................................................................................2-186
2.14.63 QRY INTERFBAND ...........................................................................2-187
2.14.64 QRY IPA ...........................................................................................2-189
2.14.65 QRY IPASPCONN .............................................................................2-190
2.14.66 QRY LACP COUNTERS ....................................................................2-191
2.14.67 QRY LACP INTERNAL ......................................................................2-192
2.14.68 QRY LACP NEIGHBOURS ................................................................2-194
2.14.69 QRY LACP PORTCHNL ....................................................................2-195
2.14.70 QRY LACPU USERATE.....................................................................2-196
2.14.71 QRY LED STATUS ............................................................................2-197
2.14.72 QRY LSWITCHNUMBER ...................................................................2-198
2.14.73 QRY MACL_ALL_TABLE ...................................................................2-200
2.14.74 QRY MACL_GROUP_QUERY ...........................................................2-201
2.14.75 QRY MACL_SPECIFIC_TABLE..........................................................2-202
2.14.76 QRY MEMORYUSERATE ..................................................................2-203
2.14.77 QRY MODULESTATUS .....................................................................2-205
2.14.78 QRY MSC .........................................................................................2-206
2.14.79 QRY MTP2LINK STATUS ..................................................................2-207
2.14.80 QRY MTP3LINK ERLANG .................................................................2-208
2.14.81 QRY MTP3LINKSETSTATUS .............................................................2-209
2.14.82 QRY NSE .........................................................................................2-210
2.14.83 QRY NSVC ....................................................................................... 2-211
2.14.84 QRY NTPTIME..................................................................................2-212
2.14.85 QRY OFFICE ALL STATUS................................................................2-213
2.14.86 QRY OFFICE STATUS.......................................................................2-213
2.14.87 QRY OMPMTP3LINKSTATUS............................................................2-214
2.14.88 QRY PATHBAND...............................................................................2-215
2.14.89 QRY PATHGPBAND ..........................................................................2-217
2.14.90 QRY PATH STATUS ..........................................................................2-220
2.14.91 QRY PATH STATUS ALL ...................................................................2-221
2.14.92 QRY PHYCPU USERATE ..................................................................2-222
VI
2.14.93 QRY POLICYMAP EPU .....................................................................2-223
2.14.94 QRY POLICYMAP RPU .....................................................................2-224
2.14.95 QRY PROCPURATE .........................................................................2-226
2.14.96 QRY PSCELLDSP.............................................................................2-227
2.14.97 QRY PTP ALL INTF CFG...................................................................2-228
2.14.98 QRY PTP ALL PORT STATE..............................................................2-230
2.14.99 QRY PTP EBEST ..............................................................................2-231
2.14.100 QRY PTP GLOBA CFG....................................................................2-232
2.14.101 QRY PTP ONE PORT STATE...........................................................2-233
2.14.102 QRY PTP UNICAST NEGOTIATION.................................................2-235
2.14.103 QRY PVCSTATUS ...........................................................................2-236
2.14.104 QRY RING ......................................................................................2-237
2.14.105 QRY RNC .......................................................................................2-238
2.14.106 QRY RPU INTERFACE....................................................................2-239
2.14.107 QRY RPU ROUTE ...........................................................................2-241
2.14.108 QRY RRUTRX.................................................................................2-242
2.14.109 QRY SAAL LMLINK CFG .................................................................2-243
2.14.110 QRY SAAL LMLINK STATUS............................................................2-245
2.14.111 QRY SBCXSTATUS .........................................................................2-246
2.14.112 QRY SCTP ALL ...............................................................................2-246
2.14.113 QRY SCTP BY ASSOCIATION .........................................................2-247
2.14.114 QRY SCTP BY MODULE .................................................................2-250
2.14.115 QRY SCTP BY PORT ......................................................................2-251
2.14.116 QRY SGSN .....................................................................................2-254
2.14.117 QRY SGSNENDPOINT ....................................................................2-255
2.14.118 QRY SLAVESTATUS........................................................................2-255
2.14.119 QRY SMPMTP3LINKSTATUS...........................................................2-257
2.14.120 QRY SPDINFO................................................................................2-258
2.14.121 QRY SSCOPLINK CFG ...................................................................2-259
2.14.122 QRY SSCOPLINK STATUS..............................................................2-261
2.14.123 QRY SUNITSTATUS........................................................................2-262
2.14.124 QRY SUPERVLAN IPPORT .............................................................2-264
2.14.125 QRY SUPERVLAN MEMBER...........................................................2-265
2.14.126 QRY TC STATE ...............................................................................2-266
2.14.127 QRY TIME ......................................................................................2-268
2.14.128 QRY TRX........................................................................................2-269
2.14.129 QRY TRXRRU.................................................................................2-270
VII
2.14.130 QRY TS ..........................................................................................2-271
2.14.131 QRY TSCHAN.................................................................................2-272
2.14.132 QRY UNITSTATUS ..........................................................................2-273
2.14.133 QRY V2BTSINFO ............................................................................2-274
2.14.134 QUERY...........................................................................................2-276
2.14.135 QUERY ALLPKG .............................................................................2-277
2.14.136 QUERY CELLCHANNEL..................................................................2-278
2.14.137 QUERY CREATED VERSION ..........................................................2-280
2.14.138 QUERY DDM ..................................................................................2-281
2.14.139 QUERY IUBLINK .............................................................................2-282
2.14.140 QUERYMSG ...................................................................................2-283
2.14.141 QUERY PMDATA ............................................................................2-283
2.14.142 QUERY RUNNING ..........................................................................2-284
2.14.143 QUERY SNAPSHOT .......................................................................2-285
2.14.144 QUERY UTRANCELLFDD ...............................................................2-286
2.14.145 QUERY VERFILE ............................................................................2-288
2.15 R ..................................................................................................................2-289
2.15.1 RECFG NSE.......................................................................................2-289
2.15.2 RELEASE MUTEXRIGHT ....................................................................2-290
2.15.3 REPAIR PMDATA................................................................................2-291
2.15.4 RESET ...............................................................................................2-292
2.15.5 RESET IUBLINK .................................................................................2-292
2.15.6 RESET IUCSLINK ...............................................................................2-293
2.15.7 RESET IUPSLINK ...............................................................................2-294
2.15.8 RESETLINK........................................................................................2-295
2.15.9 RESET UTRANCELLFDD....................................................................2-295
2.15.10 RESTORE ........................................................................................2-296
2.15.11 RST ACIRC.......................................................................................2-297
2.15.12 RST BVC ..........................................................................................2-298
2.15.13 RST BVCSIG ....................................................................................2-299
2.15.14 RST IPRES.......................................................................................2-300
2.15.15 RST MSC .........................................................................................2-301
2.15.16 RST NSVC........................................................................................2-302
2.15.17 RST TC ............................................................................................2-303
2.16 S ..................................................................................................................2-304
2.16.1 SET ALLNE RESET ............................................................................2-304
2.16.2 SET APS CHANGE .............................................................................2-305
VIII
2.16.3 SET ASPACTIVE ................................................................................2-306
2.16.4 SET ASPDEACTIVE............................................................................2-307
2.16.5 SET ASPDOWN..................................................................................2-308
2.16.6 SET ASPUP........................................................................................2-309
2.16.7 SET BLOCKSUNIT..............................................................................2-310
2.16.8 SET BLOCKUNIT................................................................................ 2-311
2.16.9 SET BOARDPOWEROFF....................................................................2-312
2.16.10 SET BOARDPOWERON....................................................................2-313
2.16.11 SET BOOT........................................................................................2-314
2.16.12 SET CANCEL IMAGROUP TEST .......................................................2-315
2.16.13 SET CEIDOPR RESET......................................................................2-316
2.16.14 SET CEID STOP RESET ...................................................................2-317
2.16.15 SET CLOCKBASE.............................................................................2-318
2.16.16 SET DISLOOP ALLUNIT....................................................................2-319
2.16.17 SET ECMM CONFIG .........................................................................2-321
2.16.18 SET FORCECHANGE .......................................................................2-323
2.16.19 SET FORCERESET ..........................................................................2-324
2.16.20 SET INHIBIT IMAGROUP ..................................................................2-325
2.16.21 SET INHIBITIMALINK........................................................................2-326
2.16.22 SETLOG ...........................................................................................2-327
2.16.23 SET LOOP SUNITTS.........................................................................2-328
2.16.24 SET MTP3ALLLINK ACTIVATE ..........................................................2-330
2.16.25 SET MTP3ALLLINK DEACTIVATE .....................................................2-331
2.16.26 SET MTP3LINK ACTIVE....................................................................2-332
2.16.27 SET MTP3LINK DEACTIVE ...............................................................2-333
2.16.28 SET MTP3LINK INHIBIT ....................................................................2-333
2.16.29 SET MTP3LINK UNINHIBIT ...............................................................2-334
2.16.30 SET NORMALCHANGE ....................................................................2-335
2.16.31 SET NORMALRESET........................................................................2-336
2.16.32 SET NTPSYN ...................................................................................2-338
2.16.33 SET PARAM .....................................................................................2-338
2.16.34 SET PATHOPR BLOCK .....................................................................2-339
2.16.35 SET PATHOPR UNBLOCK ................................................................2-340
2.16.36 SET PP2S BASE EXCHANGE ...........................................................2-341
2.16.37 SET RESTART IMAGROUP...............................................................2-343
2.16.38 SET RUNBATCH PERIODIC POLICY.................................................2-344
2.16.39 SET RUNBATCH TIMING POLICY .....................................................2-345
IX
2.16.40 SET SBCXCHANGE..........................................................................2-347
2.16.41 SET SCTP ABORT............................................................................2-348
2.16.42 SET SCTP ABORT ALL .....................................................................2-349
2.16.43 SET SCTP ESTABLISH .....................................................................2-350
2.16.44 SET SCTP ESTABLISH ALL ..............................................................2-351
2.16.45 SET SCTP SHUTDOWN....................................................................2-352
2.16.46 SET SCTP SHUTDOWN ALL.............................................................2-353
2.16.47 SET SITEMS.....................................................................................2-354
2.16.48 SET SLAVEOPR ...............................................................................2-355
2.16.49 SET SSNBLOCKOPR........................................................................2-356
2.16.50 SET SSNUNBLOCKOPR...................................................................2-357
2.16.51 SET START IMAGROUP TEST ..........................................................2-358
2.16.52 SET TASK.........................................................................................2-359
2.16.53 SET TASKFINISH..............................................................................2-360
2.16.54 SET TASKSTATUS ............................................................................2-361
2.16.55 SET UNBLOCKSUNIT .......................................................................2-362
2.16.56 SET UNBLOCKUNIT .........................................................................2-363
2.16.57 SET UNINHIBIT IMAGROUP .............................................................2-364
2.16.58 SET UNINHIBITIMALINK ...................................................................2-365
2.16.59 SHOW ALARMDETAIL ......................................................................2-367
2.16.60 SHOW ALLROLE ..............................................................................2-368
2.16.61 SHOW ALLROLESET........................................................................2-369
2.16.62 SHOW ALLSESSION ........................................................................2-369
2.16.63 SHOW ALLUSER ..............................................................................2-370
2.16.64 SHOW CURRENTALARM..................................................................2-370
2.16.65 SHOW DEPARTMENT ......................................................................2-373
2.16.66 SHOW HISTORYALARM ...................................................................2-374
2.16.67 SHOW POLICY .................................................................................2-376
2.16.68 SHOW ROLE ....................................................................................2-377
2.16.69 SHOW ROLESET..............................................................................2-378
2.16.70 SHOW TASK.....................................................................................2-379
2.16.71 SHOW USER ....................................................................................2-380
2.16.72 SPY ABISRS.....................................................................................2-381
2.16.73 SPY ATRUNK ...................................................................................2-382
2.16.74 SPY TRX ..........................................................................................2-383
2.16.75 STA IPA ............................................................................................2-384
2.16.76 START DTM......................................................................................2-386
X
2.16.77 STOP FLOWCTL...............................................................................2-386
2.16.78 STOP IPA .........................................................................................2-387
2.16.79 STP ABISRS.....................................................................................2-388
2.16.80 STP ATRUNKSPY .............................................................................2-389
2.16.81 STP TRXSPY....................................................................................2-390
2.16.82 SWITCH SATELLITE .........................................................................2-391
2.16.83 SYNC ...............................................................................................2-391
2.17 U ..................................................................................................................2-392
2.17.1 UNB ABIS...........................................................................................2-392
2.17.2 UNB APCM.........................................................................................2-394
2.17.3 UNB ARESPCM..................................................................................2-395
2.17.4 UNB ARESTRUNK..............................................................................2-395
2.17.5 UNB ATERPCM ..................................................................................2-396
2.17.6 UNB ATERTRUNK ..............................................................................2-397
2.17.7 UNB ATRUNK .....................................................................................2-399
2.17.8 UNB BVC ...........................................................................................2-400
2.17.9 UNB CELL ..........................................................................................2-401
2.17.10 UNB CUTRX .....................................................................................2-401
2.17.11 UNB FUTRX......................................................................................2-402
2.17.12 UNB IPA ...........................................................................................2-403
2.17.13 UNB NSVC .......................................................................................2-404
2.17.14 UNB TS ............................................................................................2-405
2.17.15 UNEQP APCM ..................................................................................2-406
2.17.16 UNLD MSC .......................................................................................2-407
2.17.17 UNLD SGSN .....................................................................................2-408
2.17.18 UNUSE MSC ....................................................................................2-409
2.17.19 UNUSE SGSN ..................................................................................2-410
2.17.20 UPDATE ........................................................................................... 2-411
2.17.21 USE MSC .........................................................................................2-412
2.17.22 USE SGSN .......................................................................................2-413
2.18 V ..................................................................................................................2-414
2.18.1 VALIDATE VERSION...........................................................................2-414
2.18.2 VALID CHECK ....................................................................................2-415
2.18.3 VERSION IDECHECK .........................................................................2-416
2.18.4 VERSION MSSYNC ............................................................................2-417
XI
Glossary ................................................................................................... XXIII
XII
About This Manual
Purpose
This manual explains each MML command with its function, syntax, input and output
parameters of the ZXUR 9000 UMTS Subsystem.
Intended Audience
l Maintenance engineer
l Debugging engineer
Chapter Description
I
II
Chapter 1
Overview
This chapter introduces command format, command parameter type, command compiling
key points, and Network Management MML terminal.
Table of Contents
Command Format ......................................................................................................1-1
Command Compilation ...............................................................................................1-3
1-1
button or press F5 key, system automatically adds “;” at the end of the command,
and execute it.
Command parameters types:
l Numeric
Numeric parameter can be divided into INTEGER and FLOAT.
There are two types of INTEGER:
à INTEGER number
à Parameter Argument INTEGER.
INTEGER number doesn’t include any separator, but Parameter Argument
INTEGER includes separators &, &&, -, &&- between INTEGER numbers.
There are two types of FLOAT:
à FLOAT number
It includes normal identifier, alphabet and number. Basic identifier starts with an
alphabet. For example: abc123.
à Parameter argument identifier
l Date
1-2
It includes second level time type (representation of second level time type:
HH-MI-SS) and minute level time type (representation of minute level time type:
HH-MI).
l Temperature
Decimal float number + postfix 'C'.
l Percent
Decimal float number + postfix '%'.
l String
There are two types of strings:
à Normal string
à Parameter argument string
Normal string type is enclosed by double quotation marks. Parameter argument
string includes ‘&’ between normal strings.
l Complex
1-3
1-4
2.1 A
2.1.1 ACTIVE VERSION
Shortcut
ACTIVE VERSION
Function
Command
ACTIVE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKGNAME
=<PKGNAME>;
INPUT PARAMETERS
Table 2-1 shows the input parameters of ACTIVE VERSION.
2-1
Output Parameters
Table 2-2 shows the output parameters of ACTIVE VERSION.
Example
ACTIVE VERSION:MEID=85,ISOMP=YES,PKGID=0,PKGNAME="0";
2.1.2 ADDMSG
Shortcut
ADDMSG
2-2
Function
Command
Function
Command
ADD RUNBATCH PERIODIC POLICY:POLICYNAME=<POLICYNAME>,POLICYSTAT
US=<POLICYSTATUS>,STARTTIME=<STARTTIME>,INTERVALTIME=[<DAY>][-<HOUR
>][-<MINUTE>][-<SECOND>],FILENAME=<FILENAME>[,ARGS=<ARGS>];
INPUT PARAMETERS
Table 2-3 shows the input parameters of ADD RUNBATCH PERIODIC POLICY.
2-3
Output Parameters
Table 2-4 shows the output parameters of ADD RUNBATCH PERIODIC POLICY.
Example
ADD RUNBATCH PERIODIC POLICY:POLICYNAME="aaa",POLICYSTATUS=ACTIV
E,STARTTIME="2008-810-13 13:48:22",INTERVALTIME="0"-"0"-"8"-"0";;
Function
Command
ADD RUNBATCH TIMING POLICY:POLICYNAME=<POLICYNAME>,POLICYSTATUS
=<POLICYSTATUS>,ONLYONCE=<ONLYONCE>,FILENAME=<FILENAME>[,ARGS=<A
RGS>];
INPUT PARAMETERS
Table 2-5 shows the input parameters of ADD RUNBATCH TIMING POLICY.
2-4
2-5
Output Parameters
Table 2-6 shows the output parameters of ADD RUNBATCH TIMING POLICY.
Example
ADD RUNBATCH TIMING POLICY:POLICYNAME="aaa",POLICYSTATUS=Active ,ON
LYONCETIME="2008-10-13 16:07:22",FILENAME="test.txt",ARGS="1"&"2";;
Function
Command
ADD TASK:MEASTYPEID=<MEASTYPEID>,MEASOBJMOI=<NELOC>[-<MEASOBJLIS
T>][,TASKNAME=<TASKNAME>][,TASKTYPE=<TASKTYPE>][,STARTDATE=<STARTD
ATE>][,ENDDATE=<ENDDATE>][,STATUS=<STATUS>][,GRAN=<GRAN>][,DATEMASK
=<DATEMASK>][,TIMEMASK=<TIMEMASK>];
INPUT PARAMETERS
Table 2-7 shows the input parameters of ADD TASK.
2-6
Output Parameters
Table 2-8 shows the output parameters of ADD TASK.
Example
2-7
Function
Command
ADD VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKGNAME=<PK
GNAME>;
INPUT PARAMETERS
Table 2-9 shows the input parameters of ADD VERSION.
Output Parameters
Table 2-10 shows the output parameters of ADD VERSION.
Example
ADD VERSION:MEID=0,ISOMP=YES,PKGID=0,PKGNAME="";
2-8
Function
Command
ADJUST CELLINSLAVE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT
>,SLAVESUNIT=<SLAVESUNIT>,OPRMODE=<OPRMODE>[,CELLNUM=<CELLNUM>];
INPUT PARAMETERS
Table 2-11 shows the input parameters of ADJUST CELLINSLAVE.
Output Parameters
Table 2-12 shows the output parameters of ADJUST CELLINSLAVE.
2-9
Example
QRY CELLSBYSLAVE:MEID=1,UNIT=1,SLAVENO=1,SUBSYSTEM=1;
Function
Command
SCAN FREQ:MEID=<MEID>,SITEID=<SITEID>;
INPUT PARAMETERS
Table 2-13 shows the input parameters of ADJUST RUPSLAVEINMODULE.
Output Parameters
Table 2-14 shows the output parameters of ADJUST RUPSLAVEINMODULE.
Example
SCAN FREQ:MEID=1,SITEID=1;
2-10
Function
Command
ADJUST RUPSLAVEINPLMN:MEID=<MEID>,MCC=<MCC>,MNC=<MNC>;
INPUT PARAMETERS
Table 2-15 shows the input parameters of ADJUST RUPSLAVEINPLMN.
Output Parameters
Table 2-16 shows the output parameters of ADJUST RUPSLAVEINPLMN.
Example
ADJUST RUPSLAVEINPLMN:MEID=1,MCC=1,MNC=1;
2-11
Function
Command
ALARM SYNC:SERVERID=<SERVERID>,SYSTEMTYPE=<SYSTEMTYPE>,SOURCE=<S
OURCE>;
INPUT PARAMETERS
Table 2-17 shows the input parameters of ALARM SYNC.
Output Parameters
Table 2-18 shows the output parameters of ALARM SYNC.
Example
ALARM SYNC:SERVERID=1,SYSTEMTYPE=1,SOURCE="1";
2.1.11 ANTI
Shortcut
ANTI
Function
Command
ANTI:[POS=[<SUBNET>][-<NE>]];
2-12
INPUT PARAMETERS
Table 2-19 shows the input parameters of ANTI.
Table 2-19 ANTI Input Parameters
Output Parameters
Table 2-20 shows the output parameters of ANTI.
Table 2-20 ANTI OUTPUT PARAMETERS
Example
ANTI:POS="0"-"0";
Function
Command
APPLY MUTEXRIGHT:[SUBNET=<SUBNET>][,NE=<NE>];
INPUT PARAMETERS
Table 2-21 shows the input parameters of APPLY MUTEXRIGHT.
Table 2-21 APPLY MUTEXRIGHT Input Parameters
2-13
Output Parameters
Table 2-22 shows the output parameters of APPLY MUTEXRIGHT.
Example
APPLY MUTEXRIGHT:SUBNET=0,NE=0; Result ------ Succeed in applying mutex right.
------ ;
Function
Command
APTDACTIVE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKGNA
ME=<PKGNAME>,PHYSADDRESS=<PHYSADDRESS>;
INPUT PARAMETERS
Table 2-23 shows the input parameters of APTDACTIVE VERSION.
2-14
Output Parameters
Table 2-24 shows the output parameters of APTDACTIVE VERSION.
Example
APTDACTIVE VERSION:MEID=85,ISOMP=YES,PKGID=-2147483648,PKGNAME="0";
Function
Command
APTDDEACTIVE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKG
NAME=<PKGNAME>,PHYSADDRESS=<PHYSADDRESS>;
INPUT PARAMETERS
Table 2-25 shows the input parameters of APTDDEACTIVE VERSION.
2-15
Output Parameters
Table 2-26 shows the output parameters of APTDDEACTIVE VERSION.
Example
APTDDEACTIVE VERSION:MEID=85,ISOMP=YES,PKGID=-9223372036854775808,PKG
NAME="",PHYSADDRESS=""&"";
2-16
Function
Command
APTDQUERY ALLPKG:MEID=<MEID>,ISOMP=<ISOMP>;
INPUT PARAMETERS
Table 2-27 shows the input parameters of APTDQUERY ALLPKG.
Output Parameters
Table 2-28 shows the output parameters of APTDQUERY ALLPKG.
Example
APTDQUERY ALLPKG:MEID=85,ISOMP=YES;
2-17
Function
Command
APTDVALIDATE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PHYSADDRESS=<PH
YSADDRESS>;
INPUT PARAMETERS
Table 2-29 shows the input parameters of APTDVALIDATE VERSION.
Output Parameters
Table 2-30 shows the output parameters of APTDVALIDATE VERSION.
Example
APTDVALIDATE VERSION:MEID=85,ISOMP=YES,PHYSADDRESS="--"&"--";
2-18
2.2 B
2.2.1 BACKUP
Shortcut
BACKUP
Function
Command
BACKUP:POS=[<SUBNET>][-<NE>],FILENAME=<FILENAME>,DESC=<DESC>;
INPUT PARAMETERS
Table 2-31 shows the input parameters of BACKUP.
Output Parameters
Table 2-32 shows the output parameters of BACKUP.
Example
BACKUP:POS=0-0, FILENAME="test",DESC="desc";<MESSAGE>[] Name |Status |Progre
ss |<MESSAGE>[] Name |Status |Progress |: D:\NetNumen\ommb\ums\ums-svr\cmdata\cmba
k\ test _20110831_082638.zip ------ ;
2-19
2.2.2 BACKUPLOG
Shortcut
BACKUPLOG
Function
Command
BACKUPLOG:AUTOBACKUP=<AUTOBACKUP>;
INPUT PARAMETERS
Table 2-33 shows the input parameters of BACKUPLOG.
Output Parameters
Table 2-34 shows the output parameters of BACKUPLOG.
Example
BACKUPLOG:AUTOBACKUP=False;
2-20
Function
Command
BALIST BEGIN:MEID=<MEID>[,SITEID=<SITEID>][,BTSID=<BTSID>],CELLIND=<CEL
LIND>;
INPUT PARAMETERS
Table 2-35 shows the input parameters of BALIST BEGIN.
Output Parameters
Table 2-36 shows the output parameters of BALIST BEGIN.
Example
BALIST BEGIN:MOI="1",SITEID=0,BTSID=0,CELLIND=0;
2-21
Function
Command
BALIST END:MEID=<MEID>[,SITEID=<SITEID>][,BTSID=<BTSID>],CELLIND=<CELLI
ND>;
INPUT PARAMETERS
Table 2-37 shows the input parameters of BALIST END.
Output Parameters
Table 2-38 shows the output parameters of BALIST END.
Example
BALIST END:MOI="1",SITEID=0,BTSID=0,CELLIND=0;
2-22
Function
Command
BALIST UPDATE:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,HOCBALIST=<H
OCBALIST>;
INPUT PARAMETERS
Table 2-39 shows the input parameters of BALIST UPDATE.
Output Parameters
Table 2-40 shows the output parameters of BALIST UPDATE.
Example
BALIST UPDATE:MEID=0,SITEID=1,BTSID=1,BALISTNUMBER=1,BISBALISTNUMB
ER=1,TERBALISTNUMBER=1;
2-23
Function
Command
BATCH_QUERY RRCSTATUS:MEID=<MEID>;
INPUT PARAMETERS
Table 2-41 shows the input parameters of BATCH_QUERY RRCSTATUS.
Output Parameters
Table 2-42 shows the output parameters of BATCH_QUERY RRCSTATUS.
Example
BATCH_QUERY RRCSTATUS:MEID=0;
Function
Command
BLK ABIS:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,BIEPCM=<BIEPC
M>,BIETS=<BIETS>,BIESUBTS=<BIESUBTS>,BLOCKTYPE=<BLOCKTYPE>;
2-24
INPUT PARAMETERS
Table 2-43 shows the input parameters of BLK ABIS.
Output Parameters
Table 2-44 shows the output parameters of BLK ABIS.
Example
BLK ABIS:MEID=1,SITEID=1,RACKNO=1,BIEPCM=1,BIETS=1,BIESUBTS=0,BLOCKT
YPE=0;
2-25
Function
Command
BLK APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PCM>;
INPUT PARAMETERS
Table 2-45 shows the input parameters of BLK APCM.
Output Parameters
Table 2-46 shows the output parameters of BLK APCM.
Example
BLK APCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
2-26
Function
Command
BLK ARESPCM:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>;
INPUT PARAMETERS
Table 2-47 shows the input parameters of BLK ARESPCM.
Output Parameters
Table 2-48 shows the output parameters of BLK ARESPCM.
Example
BLK ARESPCM:MEID=1,OFFICEID=0,MSCPCM=0;
2-27
Function
Command
BLK ARESTRUNK:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>,CI
CNO=<CICNO>,BLOCKTYPE=<BLOCKTYPE>;
INPUT PARAMETERS
Table 2-49 shows the input parameters of BLK ARESTRUNK.
Output Parameters
Table 2-50 shows the output parameters of BLK ARESTRUNK.
Example
BLK ARESTRUNK:MEID=1,OFFICEID=0,MSCPCM=0,CICNO=1,BLOCKTYPE=0;
2-28
Function
Command
BLK ATERPCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<P
CM>;
INPUT PARAMETERS
Table 2-51 shows the input parameters of BLK ATERPCM.
Output Parameters
Table 2-52 shows the output parameters of BLK ATERPCM.
Example
BLK ATERPCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
2-29
Function
Command
BLK ATERTRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM
=<PCM>,TS=<TS>,SUBTS=<SUBTS>,BLOCKTYPE=<BLOCKTYPE>;
INPUT PARAMETERS
Table 2-53 shows the input parameters of BLK ATERTRUNK.
Table 2-53 BLK ATERTRUNK Input Parameters
Output Parameters
Table 2-54 shows the output parameters of BLK ATERTRUNK.
Table 2-54 BLK ATERTRUNK OUTPUT PARAMETERS
2-30
Example
BLK ATERTRUNK:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9,TS=1,SUBTS=0,BLOCKT
YPE=0;
Function
Command
BLK ATRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PC
M>,TS=<TS>,BLOCKTYPE=<BLOCKTYPE>;
INPUT PARAMETERS
Table 2-55 shows the input parameters of BLK ATRUNK.
Output Parameters
Table 2-56 shows the output parameters of BLK ATRUNK.
2-31
Example
BLK ATRUNK:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9,TS=1,BLOCKTYPE=0;
Function
Command
BLK BVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,BVCI=<BVCI>;
INPUT PARAMETERS
Table 2-57 shows the input parameters of BLK BVC.
Output Parameters
Table 2-58 shows the output parameters of BLK BVC.
2-32
Example
BLK BVC:MEID=1,SGSNID=1,NSEI=0,BVCI=2;
Function
Command
BLK CELL:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,BLOCKTYPE=<BLOCK
TYPE>[,DURATION=<DURATION>];
INPUT PARAMETERS
Table 2-59 shows the input parameters of BLK CELL.
Output Parameters
Table 2-60 shows the output parameters of BLK CELL.
2-33
Example
BLK CELL:MEID=1,SITEID=1,BTSID=1,BLOCKTYPE=1,DURATION=1;
Function
Command
BLK CUTRX:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>,BLO
CKTYPE=<BLOCKTYPE>[,DURATION=<DURATION>];
INPUT PARAMETERS
Table 2-61 shows the input parameters of BLK CUTRX.
2-34
Output Parameters
Table 2-62 shows the output parameters of BLK CUTRX.
Example
BLK CUTRX:MEID=1,SITEID=1,BTSID=1,TRXID=1,BLOCKTYPE=1,DURATION=1;
Function
Command
BLK FUTRX:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>,BLO
CKTYPE=<BLOCKTYPE>[,DURATION=<DURATION>];
INPUT PARAMETERS
Table 2-63 shows the input parameters of BLK FUTRX.
2-35
Output Parameters
Table 2-64 shows the output parameters of BLK FUTRX.
Example
BLK FUTRX:MEID=1,SITEID=1,BTSID=1,TRXID=1,BLOCKTYPE=1,DURATION=1;
Function
Command
BLK IPA:MEID=<MEID>,UNIT=<UNIT>,SLAVESUNIT=<SLAVESUNIT>,BLOCKTYPE
=<BLOCKTYPE>;
INPUT PARAMETERS
Table 2-65 shows the input parameters of BLK IPA.
2-36
Output Parameters
Table 2-66 shows the output parameters of BLK IPA.
Example
BLK IPA:MEID=1,UNIT=1,SLAVESUNIT=1,BLOCKTYPE=0;
Function
Command
BLK NSVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,NSVCI=<NSVCI>;
INPUT PARAMETERS
Table 2-67 shows the input parameters of BLK NSVC.
2-37
Output Parameters
Table 2-68 shows the output parameters of BLK NSVC.
Example
BLK NSVC:MEID=1,SGSNID=1,NSEI=0,NSVCI=0;
2.2.20 BLK TS
Shortcut
BLK TS
Function
Command
BLK TS:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>,TSID=<TS
ID>,BLOCKTYPE=<BLOCKTYPE>[,DURATION=<DURATION>];
INPUT PARAMETERS
Table 2-69 shows the input parameters of BLK TS.
2-38
Output Parameters
Table 2-70 shows the output parameters of BLK TS.
Example
BLK TS:MEID=1,SITEID=1,BTSID=1,TRXID=1,TSID=0,BLOCKTYPE=1,DURATION=1;
2-39
Function
Command
BTS ACTIVE VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAME>,SI
TETYPE=<SITETYPE>,ISRESET=<ISRESET>;
INPUT PARAMETERS
Table 2-71 shows the input parameters of BTS ACTIVE VERSION.
Output Parameters
Table 2-72 shows the output parameters of BTS ACTIVE VERSION.
Example
BTS ACTIVE VERSION:MEID=85,PKGID=0,PKGNAME="--",SITETYPE=SITETYPE_ZX
G_OUTDOOR30,ISRESET=RESET;
2-40
Function
Command
BTS ADD VERSION:MEID=<MEID>,FILEPATH=<FILEPATH>;
INPUT PARAMETERS
Table 2-73 shows the input parameters of BTS ADD VERSION.
Output Parameters
Table 2-74 shows the output parameters of BTS ADD VERSION.
Example
BTS ADD VERSION:MEID=0,FILEPATH="";
2-41
Function
Command
BTS DELETE VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAME>;
INPUT PARAMETERS
Table 2-75 shows the input parameters of BTS DELETE VERSION.
Output Parameters
Table 2-76 shows the output parameters of BTS DELETE VERSION.
Example
BTS DELETE VERSION:MEID=85,PKGID=0,PKGNAME="--";
2-42
Function
Command
BTS DOWNLOAD VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAM
E>;
INPUT PARAMETERS
Table 2-77 shows the input parameters of BTS DOWNLOAD VERSION.
Output Parameters
Table 2-78 shows the output parameters of BTS DOWNLOAD VERSION.
Example
BTS DOWNLOAD VERSION:MEID=85,PKGID=0,PKGNAME="--";
2-43
Function
Command
BTS QUERY ALLPKG:MEID=<MEID>;
INPUT PARAMETERS
Table 2-79 shows the input parameters of BTS QUERY ALLPKG.
Output Parameters
Table 2-80 shows the output parameters of BTS QUERY ALLPKG.
Example
BTS QUERY ALLPKG:MEID=85;
Function
Command
BTS QUERY COMMPKG:MEID=<MEID>;
2-44
INPUT PARAMETERS
Table 2-81 shows the input parameters of BTS QUERY COMMPKG.
Output Parameters
Table 2-82 shows the output parameters of BTS QUERY COMMPKG.
Example
BTS QUERY COMMPKG:MEID=85;
Function
Command
BTS QUERY SPECPKG:MEID=<MEID>;
INPUT PARAMETERS
Table 2-83 shows the input parameters of BTS QUERY SPECPKG.
2-45
Output Parameters
Table 2-84 shows the output parameters of BTS QUERY SPECPKG.
Example
BTS QUERY SPECPKG:MEID=85;
Function
Command
BTS QUERY VERFILE:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAME>;
INPUT PARAMETERS
Table 2-85 shows the input parameters of BTS QUERY VERFILE.
2-46
Output Parameters
Table 2-86 shows the output parameters of BTS QUERY VERFILE.
Example
BTS QUERY VERFILE:MEID=85,PKGID=0,PKGNAME="--";
Function
Command
BTS SPECACTIVE VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAM
E>,SITEID=<SITEID>,ISRESET=<ISRESET>;
INPUT PARAMETERS
Table 2-87 shows the input parameters of BTS SPECACTIVE VERSION.
2-47
Output Parameters
Table 2-88 shows the output parameters of BTS SPECACTIVE VERSION.
Example
BTS SPECACTIVE VERSION:MEID=85,PKGID=1,PKGNAME="--",SITEID=0,ISRESE
T=RESET;
2-48
Function
Command
BTS SPECDEACTIVE VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGN
AME>,SITEID=<SITEID>,ISRESET=<ISRESET>;
INPUT PARAMETERS
Table 2-89 shows the input parameters of BTS SPECDEACTIVE VERSION.
Output Parameters
Table 2-90 shows the output parameters of BTS SPECDEACTIVE VERSION.
Example
BTS SPECDEACTIVE VERSION:MEID=85,PKGID=0,PKGNAME="--",SITEID=0,ISRES
ET=RESET;
2-49
Function
Command
BTS UPDATE VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAME>,S
ITETYPE=<SITETYPE>,ISRESET=<ISRESET>;
INPUT PARAMETERS
Table 2-91 shows the input parameters of BTS UPDATE VERSION.
Output Parameters
Table 2-92 shows the output parameters of BTS UPDATE VERSION.
2-50
Example
BTS UPDATE VERSION:MEID=85,PKGID=0,PKGNAME="--",SITETYPE=SITETYPE_ZX
G_OUTDOOR30,ISRESET=RESET;
2.3 C
2.3.1 CHECK LICENSE
Shortcut
CHECK LICENSE
Function
Command
CHECK LICENSE:MEID=<MEID>;
INPUT PARAMETERS
Table 2-93 shows the input parameters of CHECK LICENSE.
Output Parameters
Table 2-94 shows the output parameters of CHECK LICENSE.
Example
CHECK LICENSE:MEID="1";
2-51
Function
Command
CHG CELLTOSLAVE:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,SUBSYSTE
M=<SUBSYSTEM>,UNIT=<UNIT>,SLAVESUNIT=<SLAVESUNIT>;
INPUT PARAMETERS
Table 2-95 shows the input parameters of CHG CELLTOSLAVE.
Output Parameters
Table 2-96 shows the output parameters of CHG CELLTOSLAVE.
2-52
Example
CHG CELLTOSLAVE:MEID=1,SITEID=1,BTSID=1,SUBSYSTEM=1,UNIT=1,SLAVENO
=1;
Function
Command
UNB APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PCM>;
INPUT PARAMETERS
Table 2-97 shows the input parameters of CHK RESOURCE.
Output Parameters
Table 2-98 shows the output parameters of CHK RESOURCE.
Example
UNB APCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
2-53
Function
Command
CLEAR ALARM:ALARMKEY=<ID>-<SERVERID>;
INPUT PARAMETERS
Table 2-99 shows the input parameters of CLEAR ALARM.
Output Parameters
Table 2-100 shows the output parameters of CLEAR ALARM.
Example
CLEAR ALARM:ALARMKEY="-9223372036854775808"-"1";
2-54
2.3.5 CMIMPORT
Shortcut
CMIMPORT
Function
Command
CMIMPORT:FILENAME=<FILENAME>;
INPUT PARAMETERS
Table 2-101 shows the input parameters of CMIMPORT.
Output Parameters
Table 2-102 shows the output parameters of CMIMPORT.
Example
CMIMPORT:FILENAME="0";
Function
Command
CONFIRM VERSION:MEID=<MEID>,PKGID=<PKGID>,PKGNAME=<PKGNAME>;
2-55
INPUT PARAMETERS
Table 2-103 shows the input parameters of CONFIRM VERSION.
Output Parameters
Table 2-104 shows the output parameters of CONFIRM VERSION.
Example
CONFIRM VERSION:MEID=85,PKGID=0,PKGNAME="--";
2.3.7 COPY
Shortcut
COPY
Function
Command
COPY:AREA=<AREA>,SOURCE=[<SUBNET>][-<NE>],DEST=[<SUBNET>][-<NE>][,REP
LACE=<MOC>-<ATTRIBUTE>-<VALUE>][,RUNMODE=<RUNMODE>];
2-56
INPUT PARAMETERS
Table 2-105 shows the input parameters of COPY.
Output Parameters
Table 2-106 shows the output parameters of COPY.
Example
COPY:AREA=SNAPSHOT,SOURCE=
2-57
2.3.8 CREATE
Shortcut
CREATE
Function
Command
CREATE:[MOC=<MOC>][,MOI=<MOI>][,ATTRIBUTES=<ATTRIBUTES>][,EXTENDS
=<EXTENDS>];
INPUT PARAMETERS
Table 2-107 shows the input parameters of CREATE.
Output Parameters
Table 2-108 shows the output parameters of CREATE.
Example
CREATE:MOC="ConfigSet",MOI="SubNetwork=0,SDRMEID=4,ConfigSet=4",ATTRIBUTE
S="ConfigSet=4,ISMAIN=1,STATUS=0,SWVERSION=v10.03.01,USERLABEL=Test"; Result
------ Success in creating. ------;
2-58
Function
Command
CREATE VERSION:MEID=<MEID>,CREATETYPE=<CREATETYPE>,FILEPATH=<FILE
PATH>;
INPUT PARAMETERS
Table 2-109 shows the input parameters of CREATE VERSION.
Output Parameters
Table 2-110 shows the output parameters of CREATE VERSION.
2-59
Example
CREATE VERSION:MEID=0,CREATETYPE=OMP,FILEPATH="--";
2.4 D
2.4.1 DEACTIVE VERSION
Shortcut
DEACTIVE VERSION
Function
Command
DEACTIVE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKGNAME
=<PKGNAME>;
INPUT PARAMETERS
Table 2-111 shows the input parameters of DEACTIVE VERSION.
Output Parameters
Table 2-112 shows the output parameters of DEACTIVE VERSION.
2-60
Example
DEACTIVE VERSION:MEID=85,ISOMP=YES,PKGID=1,PKGNAME="0";
Function
Command
2.4.3 DELETE
Shortcut
DELETE
Function
Command
DELETE:[MOC=<MOC>][,MOI=<MOI>][,EXTENDS=<EXTENDS>];
INPUT PARAMETERS
Table 2-113 shows the input parameters of DELETE.
2-61
Output Parameters
Table 2-114 shows the output parameters of DELETE.
Example
DELETE:MOC=" SDRManagedElement",MOI="SubNetwork=0,SDRMEID=4"; You sure you
want to delete?(Press 'Y/y' Confirm to run,'N/n' cancel running.)y Result ------ Success in dele
ting. ------ ;
Function
Command
DELETE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKGNAME
=<PKGNAME>;
INPUT PARAMETERS
Table 2-115 shows the input parameters of DELETE VERSION.
2-62
Output Parameters
Table 2-116 shows the output parameters of DELETE VERSION.
Example
DELETE VERSION:MEID=85,ISOMP=YES,PKGID=1,PKGNAME="0";
Function
Command
DEL POLICY:POLICYNAME=<POLICYNAME>;
INPUT PARAMETERS
Table 2-117 shows the input parameters of DEL POLICY.
Output Parameters
Table 2-118 shows the output parameters of DEL POLICY.
2-63
Example
DEL POLICY:POLICYNAME="aaa";
Function
Command
DEL TASK:TASKID=<BEGINID>[-<ENDID>];
INPUT PARAMETERS
Table 2-119 shows the input parameters of DEL TASK.
Output Parameters
Table 2-120 shows the output parameters of DEL TASK.
Example
e.g.1:DEL TASK:TASKID=125; DEL TASK:125; e.g.2:DEL TASK:100-120&150-155&200&21
0;
2-64
Function
Command
DISPLAY RESULT:[RESULT=<RESULT>];
INPUT PARAMETERS
Table 2-121 shows the input parameters of DISPLAY RESULT.
Example
DISPLAY RESULT:RESULT="0"-"0"-"0";
2.5 E
2.5.1 EQP APCM
Shortcut
EQP APCM
Function
Command
EQP APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PCM>;
2-65
INPUT PARAMETERS
Table 2-122 shows the input parameters of EQP APCM.
Output Parameters
Table 2-123 shows the output parameters of EQP APCM.
Example
EQP APCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
Function
Command
EQP ARESPCM:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>;
INPUT PARAMETERS
Table 2-124 shows the input parameters of EQP ARESPCM.
2-66
Output Parameters
Table 2-125 shows the output parameters of EQP ARESPCM.
Example
EQP ARESPCM:MEID=1,OFFICEID=0,MSCPCM=0;
Function
Command
EQP ATERPCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<P
CM>;
INPUT PARAMETERS
Table 2-126 shows the input parameters of EQP ATERPCM.
2-67
Output Parameters
Table 2-127 shows the output parameters of EQP ATERPCM.
Example
EQP ATERPCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
Function
Command
EXECUTE POLICY INSTANTLY:POLICYNAME=<POLICYNAME>;
INPUT PARAMETERS
Table 2-128 shows the input parameters of EXECUTE POLICY INSTANTLY.
2-68
Output Parameters
Table 2-129 shows the output parameters of EXECUTE POLICY INSTANTLY.
Example
EXECUTE POLICY INSTANTLY:POLICYNAME="aaa";
2.5.5 EXPORT
Shortcut
EXPORT
Function
Command
EXPORT:POS=[<SUBNET>][-<NE>],AREA=<AREA>,TYPE=<TYPE>[,FILENAME=<FIL
ENAME>];
INPUT PARAMETERS
Table 2-130 shows the input parameters of EXPORT.
2-69
Output Parameters
Table 2-131 shows the output parameters of EXPORT.
Example
EXPORT:POS=0-0,AREA=0,TYPE=3;<MESSAGE>[] Name |Status |Progress |Detail --------
--------------------------------------------- Export Running 1 SubNetwork=1,SDRMEID=0 -----------
------------------------------------------ ...... ...... ...... <MESSAGE>[] Name |Status |Progress |Detail
------------------------------------------------------------------- Export Succeed 100 SubNetwork=1,SD
RMEID=0 ------------------------------------------------------------------- Result ------ All succeed ------
;
2.6 F
2.6.1 FRESH LICENSE
Shortcut
FRESH LICENSE
Function
Command
FRESH LICENSE:[GFH=<GFH>];
INPUT PARAMETERS
Table 2-132 shows the input parameters of FRESH LICENSE.
2-70
Output Parameters
Table 2-133 shows the output parameters of FRESH LICENSE.
Example
FRESH LICENSE:GFH="1";
2.7 G
2.7.1 GET BOOT
Shortcut
GET BOOT
2-71
Function
Command
GET BOOT:MEID=<MEID>,BOARDTYPE=<BOARDTYPE>,ISOMP=<ISOMP>;
INPUT PARAMETERS
Table 2-134 shows the input parameters of GET BOOT.
Output Parameters
Table 2-135 shows the output parameters of GET BOOT.
Example
GET BOOT:MEID=85,BOARDTYPE=MASTER,ISOMP=YES;
2.7.2 GETCMDLOG
Shortcut
GETCMDLOG
Function
Command
GETCMDLOG:[USERNAME=<USERNAME>][,IP=<IP>][,STARTTIME=<STARTTIME
>][,ENDTIME=<ENDTIME>][,CMDCODE=<CMDCODE>][,LOGID=<LOGID>][,CONMO
2-72
DE=<CONMODE>][,ISSUCCESS=<ISSUCCESS>][,LOGRANK=<LOGRANK>][,PAGENO
=<PAGENO>][,PAGENUM=<PAGENUM>];
INPUT PARAMETERS
Table 2-136 shows the input parameters of GETCMDLOG.
Output Parameters
Table 2-137 shows the output parameters of GETCMDLOG.
2-73
Example
GETCMDLOG:USERNAME="admin",IP="127.0.0.1",STARTTIME="2009-02-01 14:32:48
",ENDTIME="2010-02-06 14:32:48",CMDCODE="3601"&"3602"&"3603",CONMODE="GU
I",ISSUCCESS="0",PAGENO=300,PAGENUM=1;
Function
Command
GET COUNTER:[NETYPEID=<NETYPEID>];
INPUT PARAMETERS
Table 2-138 shows the input parameters of GET COUNTER.
2-74
Output Parameters
Table 2-139 shows the output parameters of GET COUNTER.
Example
e.g.1:GET COUNTER; e.g.2:GET COUNTER:MEASOBJTYPEID=8; e.g.3:GET COUNTER:ME
ASTYPEID=32010;
2.7.4 GETCPURATIO
Shortcut
GETCPURATIO
2-75
Function
Command
GETCPURATIO;
Output Parameters
Table 2-140 shows the output parameters of GETCPURATIO.
Example
GETCPURATIO;
2.7.5 GETDBRATIO
Shortcut
GETDBRATIO
Function
Command
GETDBRATIO;
Output Parameters
Table 2-141 shows the output parameters of GETDBRATIO.
2-76
Example
GETDBRATIO;
Function
Command
GET EAMSTATUSRPT:MEID=<MEID>;
INPUT PARAMETERS
Table 2-142 shows the input parameters of GET EAMSTATUSRPT.
Output Parameters
Table 2-143 shows the output parameters of GET EAMSTATUSRPT.
Example
GET EAMSTATUSRPT:MEID=1;
2-77
Function
Command
GET EMSRM:RUNMODE=<RUNMODE>;
INPUT PARAMETERS
Table 2-144 shows the input parameters of GET EMSRM.
Output Parameters
Table 2-145 shows the output parameters of GET EMSRM.
Table 2-145 GET EMSRM OUTPUT PARAMETERS
Example
GET EMSRM:RUNMODE="ASYNC";
2.7.8 GETHDUSAGE
Shortcut
GETHDUSAGE
Function
Command
GETHDUSAGE;
Output Parameters
Table 2-146 shows the output parameters of GETHDUSAGE.
Table 2-146 GETHDUSAGE OUTPUT PARAMETERS
2-78
Example
GETHDUSAGE;
2.7.9 GETHDUSAGEBYNAME
Shortcut
GETHDUSAGEBYNAME
Function
Command
GETHDUSAGEBYNAME : DISKDESCRIPTOR=<DISKDESCRIPTOR>;
INPUT PARAMETERS
Table 2-147 shows the input parameters of GETHDUSAGEBYNAME.
Output Parameters
Table 2-148 shows the output parameters of GETHDUSAGEBYNAME.
2-79
Example
GETHDUSAGEBYNAME : DISKDESCRIPTOR="/dev";;
Function
Command
GET LICENSE:[GFH=<GFH>];
INPUT PARAMETERS
Table 2-149 shows the input parameters of GET LICENSE.
Output Parameters
Table 2-150 shows the output parameters of GET LICENSE.
2-80
Example
GET LICENSE:GFH="1";
Function
Command
GET MEASOBJ:NELOC=<NELOC>,MEASOBJTYPEID=<MEASOBJTYPEID>;
INPUT PARAMETERS
Table 2-151 shows the input parameters of GET MEASOBJ.
Output Parameters
Table 2-152 shows the output parameters of GET MEASOBJ.
Example
notice: you must input the MEASOBJTYPEID or the MEASTYPEID at least ,and you can only in
put one. e.g.1:GET MEASOBJ:NELOC="100001$100$100",MEASOBJTYPEID=8; e.g.2:GET
MEASOBJ:NELOC="100001$fr0aben4-1$100001$100$100",MEASTYPEID=30116;
2-81
Function
Command
GET MEASOBJTYPE:[NETYPEID=<NETYPEID>];
INPUT PARAMETERS
Table 2-153 shows the input parameters of GET MEASOBJTYPE.
Output Parameters
Table 2-154 shows the output parameters of GET MEASOBJTYPE.
Example
e.g.1:GET MEASOBJTYPE:NETYPEID="rncManagedElement"; GET MEASOBJTYPE:"rncM
anagedElement"; e.g.2:GET MEASOBJTYPE;
2-82
Function
Command
GET MEASTYPE:[NETYPEID=<NETYPEID>];
INPUT PARAMETERS
Table 2-155 shows the input parameters of GET MEASTYPE.
Output Parameters
Table 2-156 shows the output parameters of GET MEASTYPE.
Example
e.g.1:GET MEASTYPE:MEASOBJTYPEID=8; GET MEASTYPE:8; e.g.2:GET MEASTYPE;
2-83
Function
Command
GET NELOC:[NETYPEID=<NETYPEID>];
INPUT PARAMETERS
Table 2-157 shows the input parameters of GET NELOC.
Output Parameters
Table 2-158 shows the output parameters of GET NELOC.
Example
e.g.1:GET NELOC; e.g.2:GET NELOC:NETYPEID="rncManagedElement"; GET NELOC:"rnc
ManagedElement";
Function
Command
GET PARAM:[ID=<ID>][,CONFIGTYPE=<CONFIGTYPE>][,MODULE=<MODULE>];
2-84
INPUT PARAMETERS
Table 2-159 shows the input parameters of GET PARAM.
Output Parameters
Table 2-160 shows the output parameters of GET PARAM.
2 ID STRING ID 1-1
Example
GET PARAM:ID=0,CONFIGTYPE=0,MODULE=0;
2.7.16 GETRAMUSAGE
Shortcut
GETRAMUSAGE
2-85
Function
Command
GETRAMUSAGE;
Output Parameters
Table 2-161 shows the output parameters of GETRAMUSAGE.
Example
GETRAMUSAGE;
2.7.17 GETSECLOG
Shortcut
GETSECLOG
Function
Command
GETSECLOG:[USERNAME=<USERNAME>][,IP=<IP>][,STARTTIME=<STARTTIME>][,E
NDTIME=<ENDTIME>][,LOGID=<LOGID>][,CONMODE=<CONMODE>][,PAGENO=<PA
GENO>][,PAGENUM=<PAGENUM>];
INPUT PARAMETERS
Table 2-162 shows the input parameters of GETSECLOG.
2-86
Output Parameters
Table 2-163 shows the output parameters of GETSECLOG.
Example
GETSECLOG:USERNAME="admin",IP="127.0.0.1",STARTTIME="2009-02-06 14:46:03
",ENDTIME="2010-02-06 14:46:03",CONMODE="GUI",PAGENO=1,PAGENUM=300;
2-87
Function
Command
GET SITEMS:PRODUCT=<PRODUCT>,MEID=<MEID>,SITEID=<SITEID>[,CONFIGSE
T=<CONFIGSET>];
INPUT PARAMETERS
Table 2-164 shows the input parameters of GET SITEMS.
Output Parameters
Table 2-165 shows the output parameters of GET SITEMS.
Example
GET SITEMS:PRODUCT="1",MEID="0",SITEID="0",CONFIGSET=1;
2-88
2.7.19 GETSYSLOG
Shortcut
GETSYSLOG
Function
Command
GETSYSLOG:[IP=<IP>][,STARTTIME=<STARTTIME>][,ENDTIME=<ENDTIME>][,LOGID
=<LOGID>][,LOGRANK=<LOGRANK>][,LOGSOURCE=<LOGSOURCE>][,TASKNAME
=<TASKNAME>][,PAGENO=<PAGENO>][,PAGENUM=<PAGENUM>];
INPUT PARAMETERS
Table 2-166 shows the input parameters of GETSYSLOG.
Output Parameters
Table 2-167 shows the output parameters of GETSYSLOG.
2-89
Example
GETSYSLOG:IP="10.61.97.10",STARTTIME="2009-02-06 14:52:18",ENDTIME="2010-0
2-06 14:52:18",LOGSOURCE="Fault Management",TASKNAME="synchronize alarm with
NE",PAGENO=1,PAGENUM=300;
Function
Command
GET TASKLIST:[NELOC=<NELOC>][,STATUSTYPE=<STATUSTYPE>];
INPUT PARAMETERS
Table 2-168 shows the input parameters of GET TASKLIST.
2-90
Output Parameters
Table 2-169 shows the output parameters of GET TASKLIST.
Example
e.g.1:GET TASKLIST:NELOC="100001$100$101"; GET TASKLIST:"100001$100$101"; e.g.
2:GET TASKLIST:NELOC="100001$100$101"&"100001$200$200",STATUSTYPE=CURREN
T; GET TASKLIST: "100001$100$101"&"100001$200$200",CURRENT; e.g.3:GET TASKLIST:
NELOC="100001",STATUSTYPE=CURRENT; e.g.4:GET TASKLIST: "100001$100"; e.g.5:GE
T TASKLIST:"100001$fc04137p-1$100001$100$101",STATUSTYPE=CURRENT;
Function
Command
GET TYPELIST:NETYPEID=<NETYPEID>,MEASOBJTYPEID=<MEASOBJTYPEID>;
2-91
INPUT PARAMETERS
Table 2-170 shows the input parameters of GET TYPELIST.
Output Parameters
Table 2-171 shows the output parameters of GET TYPELIST.
2-92
Example
notice: you must input the MEASOBJTYPEID or the MEASTYPEID at least ,and you can only
input one. e.g.1:GET TYPELIST:NETYPEID="rncManagedElement",MEASOBJTYPEID=108;
e.g.2:GET TYPELIST:NETYPEID="TRncManagedElement",MEASTYPEID=35004;
2.8 I
2.8.1 IMPORT
Shortcut
IMPORT
Function
Command
IMPORT:FILENAME=<FILENAME>;
INPUT PARAMETERS
Table 2-172 shows the input parameters of IMPORT.
2-93
Output Parameters
Table 2-173 shows the output parameters of IMPORT.
Example
IMPORT:POS=0-0,TYPE=0,FILENAME="test.xml";<MESSAGE>[] Name |Status |Progress
|<MESSAGE>[] Name |Status |Progress |;
2.9 K
2.9.1 KILL IPA
Shortcut
KILL IPA
Function
Command
KILL IPA:MEID=<MEID>;
INPUT PARAMETERS
Table 2-174 shows the input parameters of KILL IPA.
Output Parameters
Table 2-175 shows the output parameters of KILL IPA.
2-94
Example
KILL IPA:MEID=1;
2.9.2 KILLMSG
Shortcut
KILLMSG
Function
Command
Function
Command
KILL MUTEXRIGHT:[SUBNET=<SUBNET>][,NE=<NE>];
INPUT PARAMETERS
Table 2-176 shows the input parameters of KILL MUTEXRIGHT.
Output Parameters
Table 2-177 shows the output parameters of KILL MUTEXRIGHT.
2-95
Example
KILL MUTEXRIGHT:SUBNET=0,NE=0; Result ------ Succeed in releasing mutex right. ---
---;
2.10 L
2.10.1 LSN IMSI
Shortcut
LSN IMSI
Function
Command
LSN IMSI:MEID=<MEID>,LSNTYPE=<LSNTYPE>,IMSIINTERVAL=<IMSIINTERVAL>,IM
SILIST=<IMSILIST>;
INPUT PARAMETERS
Table 2-178 shows the input parameters of LSN IMSI.
Output Parameters
Table 2-179 shows the output parameters of LSN IMSI.
2-96
Example
LSN IMSI:MEID=0,LSNTYPE="0",IMSIINTERVAL="0",IMSILIST="0";
2.11 M
2.11.1 MAN BCCHEX
Shortcut
MAN BCCHEX
Function
Command
BLK TS:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>,TSID=<TS
ID>,BLOCKTYPE=<BLOCKTYPE>[,DURATION=<DURATION>];
INPUT PARAMETERS
Table 2-180 shows the input parameters of MAN BCCHEX.
2-97
Output Parameters
Table 2-181 shows the output parameters of MAN BCCHEX.
Example
BLK TS:MEID=1,SITEID=1,BTSID=1,TRXID=1,TSID=0,BLOCKTYPE=1,DURATION=1;
Function
Command
MAN FORCHANDOVER:MEID=<MEID>[,SITEID=<SITEID>][,BTSID=<BTSID>][,TRX
ID=<TRXID>][,TSID=<TSID>][,CELLIDTYPE=<CELLIDTYPE>][,OBJSITEID=<OBJSITE
ID>][,OBJBTSID=<OBJBTSID>][,MCC=<MCC>][,MNC=<MNC>][,LAC=<LAC>][,CI=<CI
>][,RNCID3G=<RNCID3G>][,CELLID3G=<CELLID3G>][,LAC3G=<LAC3G>][,CELLTYP
E3G=<CELLTYPE3G>];
INPUT PARAMETERS
Table 2-182 shows the input parameters of MAN FORCHANDOVER.
2-98
Output Parameters
Table 2-183 shows the output parameters of MAN FORCHANDOVER.
2-99
Example
MAN FORCHANDOVER:MEID=0,SITEID=0,BTSID=1,TRXID=1,TSID=0,CELLIDTYPE
=1,OBJSITEID=0,OBJBTSID=0,MCC=0,MNC=0,LAC=0,CI=0,RNCID3G=0,CELLID3G
=0,LAC3G=0,CELLTYPE3G=3G_CELL_0;
2.12 N
2.12.1 NORMAL MODE
Shortcut
NORMAL MODE
Function
Command
Function
Command
NTP SYNC:MEID=<MEID>[,SYNCFLAG=<SYNCFLAG>];
INPUT PARAMETERS
Table 2-184 shows the input parameters of NTP SYNC.
2-100
Output Parameters
Table 2-185 shows the output parameters of NTP SYNC.
Example
NTP SYNC:MEID=85,SYNCFLAG=0;
2.13 O
2.13.1 OBSERVE CELLCHANNEL
Shortcut
OBSERVE CELLCHANNEL
Function
Command
OBSERVE CELLCHANNEL:MEID=<MEID>,CID=<CID>,CHNLID=<CHNLID>,ISSPY
=<ISSPY>,CHANTYPE=<CHANTYPE>;
INPUT PARAMETERS
Table 2-186 shows the input parameters of OBSERVE CELLCHANNEL.
2-101
Output Parameters
Table 2-187 shows the output parameters of OBSERVE CELLCHANNEL.
Example
OBSERVE CELLCHANNEL:MEID=0,CID=0,CHNLID=0,ISSPY=0,CHANTYPE=0;
Function
Command
OBSERVE IUBLINK:MEID=<MEID>,NODEBNO=<NODEBNO>,PORTTYPE=<PORTTYP
E>,PORTID=<PORTID>,PORTNUM=<PORTNUM>,UCOPR=<UCOPR>;
2-102
INPUT PARAMETERS
Table 2-188 shows the input parameters of OBSERVE IUBLINK.
Output Parameters
Table 2-189 shows the output parameters of OBSERVE IUBLINK.
Example
OBSERVE IUBLINK:MEID=0,NODEBNO=0,PORTTYPE=0,PORTID=0,PORTNUM=0,U
COPR=0;
2-103
Function
Command
OBSERVE UTRANCELLFDD:MEID=<MEID>,CID=<CID>,SPYTYPE=<SPYTYPE>;
INPUT PARAMETERS
Table 2-190 shows the input parameters of OBSERVE UTRANCELLFDD.
Output Parameters
Table 2-191 shows the output parameters of OBSERVE UTRANCELLFDD.
Example
OBSERVE UTRANCELLFDD:MEID=0,CID=0,SPYTYPE=1;
2.13.4 OMMBACKUP
Shortcut
OMMBACKUP
2-104
Function
Command
OMMBACKUP:COMMAND=<COMMAND>;
INPUT PARAMETERS
Table 2-192 shows the input parameters of OMMBACKUP.
Output Parameters
Table 2-193 shows the output parameters of OMMBACKUP.
Example
Function
Command
OMM CMD:TYPE=<TYPE>[,ATTRIB=<ATTRIB>];
INPUT PARAMETERS
Table 2-194 shows the input parameters of OMM CMD.
2-105
Output Parameters
Table 2-195 shows the output parameters of OMM CMD.
Example
OMM CMD:TYPE="1",ATTRIB="1";
2.13.6 OMMRREPORT
Shortcut
OMMRREPORT
Function
Command
OMMRREPORT:REPORT=<TASKID>-<PROGRESS>-<STATUS>[-<EXCEPTION>];
INPUT PARAMETERS
Table 2-196 shows the input parameters of OMMRREPORT.
2-106
Example
OMMRREPORT:OMMRREPORT="0"-"0"-"0"-"0";
2.13.7 OMMRSYNC
Shortcut
OMMRSYNC
Function
Command
OMMRSYNC:[POS=<POS>],RADIOTYPE=<RADIOTYPE>,SYNCTYPE=<SYNCTYPE>,R
UNMODE=<RUNMODE>,ISMASTERTOSLAVE=<ISMASTERTOSLAVE>,ISSAVE=<ISSA
VE>;
INPUT PARAMETERS
Table 2-197 shows the input parameters of OMMRSYNC.
2-107
Output Parameters
Table 2-198 shows the output parameters of OMMRSYNC.
Example
OMMRSYNC:POS="1",RADIOTYPE="0"&"0",SYNCTYPE=-100,RUNMODE="SYNC",IS
MASTERTOSLAVE=1,ISSAVE=1;
Function
Command
OPERATE DDM:MOC=<MOC>,MOI=<MOI>[,ATTRIBUTES=<ATTRIBUTES>][,EXTEND
S=<EXTENDS>],TYPE=<TYPE>[,WHERE=<WHERE>];
INPUT PARAMETERS
Table 2-199 shows the input parameters of OPERATE DDM.
2-108
Output Parameters
Table 2-200 shows the output parameters of OPERATE DDM.
Example
OPERATE DDM:MOC="1",MOI="1",ATTRIBUTES="1",EXTENDS="1",TYPE="1",WHE
RE="1";
2.14 Q
2.14.1 QRY ABIS
Shortcut
QRY ABIS
Function
Command
QRY ABIS:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,BIEPCM=<BIEPC
M>,BIETS=<BIETS>,BIESUBTS=<BIESUBTS>;
INPUT PARAMETERS
Table 2-201 shows the input parameters of QRY ABIS.
2-109
Output Parameters
Table 2-202 shows the output parameters of QRY ABIS.
Example
QRY ABIS:MEID=1,SITEID=1,RACKNO=1,BIEPCM=1,BIETS=1,BIESUBTS=0;
Function
Command
QRY ABISDEV:MEID=<MEID>,SITEID=<SITEID>,TEI=<TEI>;
2-110
INPUT PARAMETERS
Table 2-203 shows the input parameters of QRY ABISDEV.
Output Parameters
Table 2-204 shows the output parameters of QRY ABISDEV.
Example
QRY ABISDEV:MEID=1,SITEID=1,TEI=0;
Function
Command
QRY ABISUSE:MEID=<MEID>,SITEID=<SITEID>;
INPUT PARAMETERS
Table 2-205 shows the input parameters of QRY ABISUSE.
2-111
Output Parameters
Table 2-206 shows the output parameters of QRY ABISUSE.
Example
QRY ABISUSE:MEID=1,SITEID=1;
Function
Command
QRY ACL4 ALL TABLE:MEID=<MEID>;
INPUT PARAMETERS
Table 2-207 shows the input parameters of QRY ACL4 ALL TABLE.
2-112
Output Parameters
Table 2-208 shows the output parameters of QRY ACL4 ALL TABLE.
Example
QRY ACL4 ALL TABLE:MEID=0;
Function
Command
QRY ACL4 GROUP:MEID=<MEID>;
2-113
INPUT PARAMETERS
Table 2-209 shows the input parameters of QRY ACL4 GROUP.
Output Parameters
Table 2-210 shows the output parameters of QRY ACL4 GROUP.
Example
QRY ACL4 GROUP:MEID=0;
2-114
Function
Command
QRY ACL4 SPECIFIC TABLE:MEID=<MEID>,ACL4_NAME=<ACL4_NAME>;
INPUT PARAMETERS
Table 2-211 shows the input parameters of QRY ACL4 SPECIFIC TABLE.
Output Parameters
Table 2-212 shows the output parameters of QRY ACL4 SPECIFIC TABLE.
2-115
Example
QRY ACL4 SPECIFIC TABLE:MEID=0,ACL4_NAME="1";
Function
Command
QRY AH IF EPU:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MODULE
>,UNIT=<UNIT>,SUNIT=<SUNIT>;
INPUT PARAMETERS
Table 2-213 shows the input parameters of QRY AH IF EPU.
Output Parameters
Table 2-214 shows the output parameters of QRY AH IF EPU.
2-116
Example
QRY AH IF EPU:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=65535,SUNIT=255;
Function
Command
QRY AH IF RPU:MEID=<MEID>;
INPUT PARAMETERS
Table 2-215 shows the input parameters of QRY AH IF RPU.
2-117
Output Parameters
Table 2-216 shows the output parameters of QRY AH IF RPU.
Example
QRY AH IF RPU:MEID=0;
2-118
Function
Command
QRY ALCAP DATA:MEID=<MEID>,ANI=<ANI>,PATHID=<PATHID>,CID=<CID>;
INPUT PARAMETERS
Table 2-217 shows the input parameters of QRY ALCAP DATA.
Output Parameters
Table 2-218 shows the output parameters of QRY ALCAP DATA.
10 IP STRING UP IP 1-1
2-119
Example
QRY ALCAP DATA:MEID=0,ANI=1,PATHID=0,CID=8;
Function
Command
QRY ALL BLOCK RUP UNIT:MEID=<MEID>;
INPUT PARAMETERS
Table 2-219 shows the input parameters of QRY ALL BLOCK RUP UNIT.
Output Parameters
Table 2-220 shows the output parameters of QRY ALL BLOCK RUP UNIT.
2-120
Example
QRY ALL BLOCK RUP UNIT:MEID=0;
Function
Command
QRY ALL BLOCK SLAVE SUNIT:MEID=<MEID>;
INPUT PARAMETERS
Table 2-221 shows the input parameters of QRY ALL BLOCK SLAVE SUNIT.
Output Parameters
Table 2-222 shows the output parameters of QRY ALL BLOCK SLAVE SUNIT.
Example
QRY ALL BLOCK SLAVE SUNIT:MEID=0;
2-121
Function
Command
QRY ALLLINK STATUS:MEID=<MEID>;
INPUT PARAMETERS
Table 2-223 shows the input parameters of QRY ALLLINK STATUS.
Output Parameters
Table 2-224 shows the output parameters of QRY ALLLINK STATUS.
Example
QRY ALLLINK STATUS:MEID=0;
2-122
Function
Command
QRY APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PCM
>;
INPUT PARAMETERS
Table 2-225 shows the input parameters of QRY APCM.
Output Parameters
Table 2-226 shows the output parameters of QRY APCM.
Example
QRY APCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=0;
2-123
Function
Command
QRY ARESPCM:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>;
INPUT PARAMETERS
Table 2-227 shows the input parameters of QRY ARESPCM.
Output Parameters
Table 2-228 shows the output parameters of QRY ARESPCM.
Example
QRY ARESPCM:MEID=1,OFFICEID=0,MSCPCM=0;
2-124
Function
Command
QRY ARESTRUNK:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>,CI
CNO=<CICNO>;
INPUT PARAMETERS
Table 2-229 shows the input parameters of QRY ARESTRUNK.
Output Parameters
Table 2-230 shows the output parameters of QRY ARESTRUNK.
Example
QRY ARESTRUNK:MEID=1,OFFICEID=0,MSCPCM=0,CICNO=1;
2-125
Function
Command
QRY ARP PORT:MEID=<MEID>,SUBSYSTEM1=<SUBSYSTEM1>,MODULE1=<MODUL
E1>,UNIT1=<UNIT1>,SUNIT1=<SUNIT1>,LOCALPORT=<LOCALPORT>;
INPUT PARAMETERS
Table 2-231 shows the input parameters of QRY ARP PORT.
Output Parameters
Table 2-232 shows the output parameters of QRY ARP PORT.
2-126
Example
QRY ARP PORT:MEID=0,SUBSYSTEM1=0,MODULE1=1,UNIT1=1,SUNIT1=1,LOCALP
ORT=1;
Function
Command
QRY ARP STATIC:MEID=<MEID>;
INPUT PARAMETERS
Table 2-233 shows the input parameters of QRY ARP STATIC.
Output Parameters
Table 2-234 shows the output parameters of QRY ARP STATIC.
2-127
Example
QRY ARP STATIC:MEID=0;
Function
Command
QRY ASPSTATUS:MEID=<MEID>,ASID=<ASID>,ASPID=<ASPID>;
INPUT PARAMETERS
Table 2-235 shows the input parameters of QRY ASPSTATUS.
2-128
Output Parameters
Table 2-236 shows the output parameters of QRY ASPSTATUS.
Example
QRY ASPSTATUS:MEID=0,ASID=1,ASPID=1;
Function
Command
QRY ASSTATUS:MEID=<MEID>,ASID=<ASID>;
2-129
INPUT PARAMETERS
Table 2-237 shows the input parameters of QRY ASSTATUS.
Output Parameters
Table 2-238 shows the output parameters of QRY ASSTATUS.
Example
QRY ASSTATUS:MEID=0,ASID=1;
2-130
Function
Command
QRY ATERPCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<P
CM>;
INPUT PARAMETERS
Table 2-239 shows the input parameters of QRY ATERPCM.
Output Parameters
Table 2-240 shows the output parameters of QRY ATERPCM.
Example
QRY ATERPCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
2-131
Function
Command
QRY ATERTRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM
=<PCM>,TS=<TS>,SUBTS=<SUBTS>;
INPUT PARAMETERS
Table 2-241 shows the input parameters of QRY ATERTRUNK.
Output Parameters
Table 2-242 shows the output parameters of QRY ATERTRUNK.
Example
QRY ATERTRUNK:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9,TS=1,SUBTS=0;
2-132
Function
Command
QRY ATRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PC
M>,TS=<TS>;
INPUT PARAMETERS
Table 2-243 shows the input parameters of QRY ATRUNK.
Output Parameters
Table 2-244 shows the output parameters of QRY ATRUNK.
Example
QRY ATRUNK:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9,TS=1;
2-133
Function
Command
QRY BATCHASPSTATUS:MEID=<MEID>;
INPUT PARAMETERS
Table 2-245 shows the input parameters of QRY BATCHASPSTATUS.
Output Parameters
Table 2-246 shows the output parameters of QRY BATCHASPSTATUS.
Example
QRY BATCHASPSTATUS:MEID=0;
2-134
Function
Command
QRY BATCHASSTATUS:MEID=<MEID>;
INPUT PARAMETERS
Table 2-247 shows the input parameters of QRY BATCHASSTATUS.
Output Parameters
Table 2-248 shows the output parameters of QRY BATCHASSTATUS.
Example
QRY BATCHASSTATUS:MEID=0;
Function
Command
QRY BATH QUERY GROUP STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNI
T=<UNIT>;
2-135
INPUT PARAMETERS
Table 2-249 shows the input parameters of QRY BATH QUERY GROUP STATE.
Output Parameters
Table 2-250 shows the output parameters of QRY BATH QUERY GROUP STATE.
Example
QRY BATH QUERY GROUP STATE:MEID=0,SUBSYSTEM="0",UNIT=1;
2-136
Function
Command
QRY BATH QUERY LINK STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT
=<UNIT>;
INPUT PARAMETERS
Table 2-251 shows the input parameters of QRY BATH QUERY LINK STATE.
Output Parameters
Table 2-252 shows the output parameters of QRY BATH QUERY LINK STATE.
2-137
Example
QRY BATH QUERY LINK STATE:MEID=0,SUBSYSTEM=0,UNIT=1;
Function
Command
QRY BATH QUERY TC STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<U
NIT>;
INPUT PARAMETERS
Table 2-253 shows the input parameters of QRY BATH QUERY TC STATE.
Output Parameters
Table 2-254 shows the output parameters of QRY BATH QUERY TC STATE.
2-138
Example
QRY BATH QUERY TC STATE:MEID=0,SUBSYSTEM="0",UNIT=1;
Function
Command
QRY BFD BRIEF EPU:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MODU
LE>,UNIT=<UNIT>,SUNIT=<SUNIT>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-255 shows the input parameters of QRY BFD BRIEF EPU.
2-139
Output Parameters
Table 2-256 shows the output parameters of QRY BFD BRIEF EPU.
Example
QRY BFD BRIEF EPU:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=65535,SUNIT=25
5,IGNOREFLAG=;
2-140
Function
Command
QRY BFD BRIEF RPU:MEID=<MEID>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-257 shows the input parameters of QRY BFD BRIEF RPU.
Output Parameters
Table 2-258 shows the output parameters of QRY BFD BRIEF RPU.
2-141
Example
QRY BFD BRIEF RPU:MEID=0,IGNOREFLAG=;
Function
Command
QRY BFD CHANGOVER PORT EPU:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MO
DULE=<MODULE>,UNIT=<UNIT>,SUNIT=<SUNIT>;
INPUT PARAMETERS
Table 2-259 shows the input parameters of QRY BFD CHANGOVER PORT EPU.
2-142
Output Parameters
Table 2-260 shows the output parameters of QRY BFD CHANGOVER PORT EPU.
Example
QRY BFD CHANGOVER PORT EPU:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=655
35,SUNIT=255;
Function
Command
QRY BFD DAMP RPU:MEID=<MEID>;
INPUT PARAMETERS
Table 2-261 shows the input parameters of QRY BFD DAMP RPU.
2-143
Output Parameters
Table 2-262 shows the output parameters of QRY BFD DAMP RPU.
Example
QRY BFD DAMP RPU:MEID=0;
Function
Command
QRY BFD DETAIL EPU:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MOD
ULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,IGNOREFLAG=<IGNOREFLAG>;
2-144
INPUT PARAMETERS
Table 2-263 shows the input parameters of QRY BFD DETAIL EPU.
Output Parameters
Table 2-264 shows the output parameters of QRY BFD DETAIL EPU.
2-145
2-146
Example
QRY BFD DETAIL EPU:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=65535,SUNIT=2
55,IGNOREFLAG=;
Function
Command
QRY BFD DETAIL RPU:MEID=<MEID>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-265 shows the input parameters of QRY BFD DETAIL RPU.
2-147
Output Parameters
Table 2-266 shows the output parameters of QRY BFD DETAIL RPU.
2-148
2-149
Example
QRY BFD DETAIL RPU:MEID=0,IGNOREFLAG=;
Function
Command
QRY BOARDINFO:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,SHELFNO
=<SHELFNO>,PANELNO=<PANELNO>;
INPUT PARAMETERS
Table 2-267 shows the input parameters of QRY BOARDINFO.
2-150
Output Parameters
Table 2-268 shows the output parameters of QRY BOARDINFO.
Example
QRY BOARDINFO:MEID=1,SITEID=1,RACKNO=1,SHELFNO=1,PANELNO=1;
Function
Command
QRY BVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,BVCI=<BVCI>;
INPUT PARAMETERS
Table 2-269 shows the input parameters of QRY BVC.
2-151
Output Parameters
Table 2-270 shows the output parameters of QRY BVC.
Table 2-270 QRY BVC OUTPUT PARAMETERS
Example
QRY BVC:MEID=1,SGSNID=1,NSEI=0,BVCI=2;
Function
Command
QRY CEID STATUS:MEID=<MEID>,PATHID=<PATHID>,ANI=<ANI>,CID=<CID>;
INPUT PARAMETERS
Table 2-271 shows the input parameters of QRY CEID STATUS.
Table 2-271 QRY CEID STATUS Input Parameters
2-152
Output Parameters
Table 2-272 shows the output parameters of QRY CEID STATUS.
Example
QRY CEID STATUS:MEID=0,PATHID=0,ANI=0,CID=8;
Function
Command
QRY CEID STATUS ALL:MEID=<MEID>,MODULE=<MODULE>;
INPUT PARAMETERS
Table 2-273 shows the input parameters of QRY CEID STATUS ALL.
2-153
Output Parameters
Table 2-274 shows the output parameters of QRY CEID STATUS ALL.
Example
QRY CEID STATUS ALL:MEID=0,MODULE=1;
Function
Command
QRY CELL:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>;
INPUT PARAMETERS
Table 2-275 shows the input parameters of QRY CELL.
2-154
Output Parameters
Table 2-276 shows the output parameters of QRY CELL.
Example
QRY CELL:MEID=0,SITEID=1,BTSID=1;
Function
Command
QRY CELLSBYSLAVE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,SL
AVESUNIT=<SLAVESUNIT>;
INPUT PARAMETERS
Table 2-277 shows the input parameters of QRY CELLSBYSLAVE.
2-155
Output Parameters
Table 2-278 shows the output parameters of QRY CELLSBYSLAVE.
Example
QRY CELLSBYSLAVE:MEID=1,UNIT=1,SLAVENO=1,SUBSYSTEM=1;
Function
Command
QRY CHANINMODULE:MEID=<MEID>,MODULE=<MODULE>;
INPUT PARAMETERS
Table 2-279 shows the input parameters of QRY CHANINCELL.
2-156
Output Parameters
Table 2-280 shows the output parameters of QRY CHANINCELL.
Example
QRY CHANINMODULE:MEID=1,MODULE=1;
Function
Command
QRY CHANINMODULE:MEID=<MEID>,MODULE=<MODULE>;
INPUT PARAMETERS
Table 2-281 shows the input parameters of QRY CHANINMODULE.
2-157
Output Parameters
Table 2-282 shows the output parameters of QRY CHANINMODULE.
Example
QRY CHANINMODULE:MEID=1,MODULE=1;
Function
Command
QRY CONNBYTS:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID
>,TSID=<TSID>;
INPUT PARAMETERS
Table 2-283 shows the input parameters of QRY CONNBYIMSI.
2-158
Output Parameters
Table 2-284 shows the output parameters of QRY CONNBYIMSI.
Example
QRY CONNBYTS:MEID=1,SITEID=1,BTSID=1,TRXID=1,TSID=0;
Function
Command
QRY CONNBYTS:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID
>,TSID=<TSID>;
INPUT PARAMETERS
Table 2-285 shows the input parameters of QRY CONNBYTS.
2-159
Output Parameters
Table 2-286 shows the output parameters of QRY CONNBYTS.
Example
QRY CONNBYTS:MEID=1,SITEID=1,BTSID=1,TRXID=1,TSID=0;
Function
Command
QRY CPUUSERATE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>;
INPUT PARAMETERS
Table 2-287 shows the input parameters of QRY CPUUSERATE.
2-160
Output Parameters
Table 2-288 shows the output parameters of QRY CPUUSERATE.
Example
QRY CPUUSERATE:MEID=0,RACK=1,SHELF=1,SLOT=1,CPU=1;
2-161
Function
Command
QRY DHCP CLIENT INFO:MEID=<MEID>,HARDADDR=<HARDADDR>,CLIENTID=<C
LIENTID>;
INPUT PARAMETERS
Table 2-289 shows the input parameters of QRY DHCP CLIENT INFO.
Output Parameters
Table 2-290 shows the output parameters of QRY DHCP CLIENT INFO.
Example
QRY DHCP CLIENT INFO:MEID=0,HARDADDR="A1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.01",CLIE
NTID="B1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.01";
2-162
Function
Command
QRY DISK:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT>,CPU=<C
PU>;
INPUT PARAMETERS
Table 2-291 shows the input parameters of QRY DISK.
Table 2-291 QRY DISK Input Parameters
Output Parameters
Table 2-292 shows the output parameters of QRY DISK.
2-163
Example
QRY DISK:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0;
Function
Command
QRY DPISTATUS:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MODULE
>,UNIT=<UNIT>,SUNIT=<SUNIT>;
INPUT PARAMETERS
Table 2-293 shows the input parameters of QRY DPISTATUS.
Output Parameters
Table 2-294 shows the output parameters of QRY DPISTATUS.
2-164
Example
QRY DPISTATUS:MEID=0,SUBSYSTEM=0,MODULE=1,UNIT=1,SUNIT=1;
Function
Command
QRY DRPATTRIBUTE:MEID=<MEID>,SYSTEMMODE=<SYSTEMMODE>;
INPUT PARAMETERS
Table 2-295 shows the input parameters of QRY DRPATTRIBUTE.
Output Parameters
Table 2-296 shows the output parameters of QRY DRPATTRIBUTE.
2-165
Example
QRY DRPATTRIBUTE:MEID=0,SYSTEMMODE=;
Function
Command
Function
Command
QRY ENDPOINT:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,IPADDR=<IPADD
R>,UDPPORT=<UDPPORT>;
INPUT PARAMETERS
Table 2-297 shows the input parameters of QRY ENDPOINT.
2-166
Output Parameters
Table 2-298 shows the output parameters of QRY ENDPOINT.
Example
QRY ENDPOINT:MEID=1,SGSNID=1,NSEI=0,IPADDR="0",UDPPORT=0;
Function
Command
QRY EPU INTERFACE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MOD
ULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,IGNOREFLAG=<IGNOREFLAG>;
2-167
INPUT PARAMETERS
Table 2-299 shows the input parameters of QRY EPU INTERFACE.
Output Parameters
Table 2-300 shows the output parameters of QRY EPU INTERFACE.
2-168
Example
QRY EPU INTERFACE:MEID=0,SUBSYSTEM=0,MODULE=1,UNIT=1,SUNIT=1,IGNOR
EFLAG=;
Function
Command
QRY EPU ROUTE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MODULE
>,UNIT=<UNIT>,SUNIT=<SUNIT>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-301 shows the input parameters of QRY EPU ROUTE.
2-169
Output Parameters
Table 2-302 shows the output parameters of QRY EPU ROUTE.
2-170
Example
QRY EPU ROUTE:MEID=0,SUBSYSTEM=0,MODULE=0,UNIT=0,SUNIT=0,IGNOREF
LAG=;
Function
Command
QRY ETHOAM DISC:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MODU
LE>,UNIT=<UNIT>,SUNIT=<SUNIT>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-303 shows the input parameters of QRY ETHOAM DISC.
Output Parameters
Table 2-304 shows the output parameters of QRY ETHOAM DISC.
2-171
2-172
Example
QRY ETHOAM DISC:MEID=0,SUBSYSTEM=0,MODULE=1,UNIT=1,SUNIT=1,PORT=1;
2-173
Function
Command
QRY ETHOAM LINKMONI:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE
=<MODULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-305 shows the input parameters of QRY ETHOAM LINKMONI.
Output Parameters
Table 2-306 shows the output parameters of QRY ETHOAM LINKMONI.
2-174
2-175
Example
QRY ETHOAM LINKMONI:MEID=0,SUBSYSTEM=0,MODULE=1,UNIT=1,SUNIT=1,P
ORT=1;
Function
Command
QRY ETHOAM STATICS:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<M
ODULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-307 shows the input parameters of QRY ETHOAM STATICS.
2-176
Output Parameters
Table 2-308 shows the output parameters of QRY ETHOAM STATICS.
2-177
Example
QRY ETHOAM STATICS:MEID=0,SUBSYSTEM=0,MODULE=1,UNIT=1,SUNIT=1,POR
T=1;
Function
Command
QRY FREQUENCY:MEID=<MEID>,MODULE=<MODULE>,UNIT=<UNIT>,SUNIT=<SUN
IT>,SUBSYSTEM=<SUBSYSTEM>,DIR=<DIR>;
INPUT PARAMETERS
Table 2-309 shows the input parameters of QRY FREQUENCY.
2-178
Output Parameters
Table 2-310 shows the output parameters of QRY FREQUENCY.
Example
QRY FREQUENCY:MEID=0,MODULE=1,UNIT=1,SUNIT=1,SUBSYSTEM=0,DIR="0";
2-179
Function
Command
QRY GET IMAGROUP TEST RESULT:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,U
NIT=<UNIT>,IMACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-311 shows the input parameters of QRY GET IMAGROUP TEST RESULT.
Output Parameters
Table 2-312 shows the output parameters of QRY GET IMAGROUP TEST RESULT.
2-180
Example
QRY GET IMAGROUP TEST RESULT:MEID=0,SUBSYSTEM=0,UNIT=1,IMACHIP=1,I
MAGRP=1;
Function
Command
QRY GPSSTATUS:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT>,C
PU=<CPU>;
INPUT PARAMETERS
Table 2-313 shows the input parameters of QRY GPSSTATUS.
Output Parameters
Table 2-314 shows the output parameters of QRY GPSSTATUS.
2-181
Example
QRY GPSSTATUS:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0;
Function
Command
QRY HARDVERINFO:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>;
INPUT PARAMETERS
Table 2-315 shows the input parameters of QRY HARDVERINFO.
2-182
Output Parameters
Table 2-316 shows the output parameters of QRY HARDVERINFO.
Example
QRY HARDVERINFO:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0;
2-183
Function
Command
QRY IMAGRP STATUS:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,I
MACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-317 shows the input parameters of QRY IMAGRP STATUS.
Output Parameters
Table 2-318 shows the output parameters of QRY IMAGRP STATUS.
2-184
Example
QRY IMAGRP STATUS:MEID=0,SUBSYSTEM=0,UNIT=1,IMACHIP=1,IMAGRP=1;
Function
Command
QRY IMALINK STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,IM
ACHIP=<IMACHIP>,E1INDEX=<E1INDEX>;
INPUT PARAMETERS
Table 2-319 shows the input parameters of QRY IMALINK STATE.
Table 2-319 QRY IMALINK STATE Input Parameters
2-185
Output Parameters
Table 2-320 shows the output parameters of QRY IMALINK STATE.
Example
QRY IMALINK STATE:MEID=0,MODULE="1",SUNIT="1",SUBSYSTEM="0",UNIT=1,I
MACHIP=1,E1INDEX=1;
Function
Command
QRY IMSILCLS:MEID=<MEID>,IMSI=<IMSI>;
2-186
INPUT PARAMETERS
Table 2-321 shows the input parameters of QRY IMSILCLS.
Output Parameters
Table 2-322 shows the output parameters of QRY IMSILCLS.
Example
2-187
Function
Command
QRY INTERFBAND:MEID=<MEID>,QUERYTYPE=<QUERYTYPE>,SITEID=<SITEID>,B
TSID=<BTSID>[,TRXID=<TRXID>];
INPUT PARAMETERS
Table 2-323 shows the input parameters of QRY INTERFBAND.
Output Parameters
Table 2-324 shows the output parameters of QRY INTERFBAND.
2-188
Example
QRY INTERFBAND:MEID=0,QUERYTYPE=0,SITEID=1,BTSID=1,TRXID=1;
Function
Command
QRY IPA:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,SLAVESUNIT
=<SLAVESUNIT>;
INPUT PARAMETERS
Table 2-325 shows the input parameters of QRY IPA.
Output Parameters
Table 2-326 shows the output parameters of QRY IPA.
2-189
Example
QRY IPA:MEID=1,SUBSYSTEM=1,UNIT=1,SLAVESUNIT=9;
Function
Command
QRY IPASPCONN:MEID=<MEID>;
INPUT PARAMETERS
Table 2-327 shows the input parameters of QRY IPASPCONN.
Output Parameters
Table 2-328 shows the output parameters of QRY IPASPCONN.
2-190
Example
QRY IPASPCONN:MEID=0;
Function
Command
QRY LACP COUNTERS:MEID=<MEID>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-329 shows the input parameters of QRY LACP COUNTERS.
2-191
Output Parameters
Table 2-330 shows the output parameters of QRY LACP COUNTERS.
Example
QRY LACP COUNTERS:MEID=0,PORT=1;
Function
Command
QRY LACP INTERNAL:MEID=<MEID>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-331 shows the input parameters of QRY LACP INTERNAL.
2-192
Output Parameters
Table 2-332 shows the output parameters of QRY LACP INTERNAL.
Example
QRY LACP INTERNAL:MEID=0,PORT=1;
2-193
Function
Command
QRY LACP NEIGHBOURS:MEID=<MEID>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-333 shows the input parameters of QRY LACP NEIGHBOURS.
Output Parameters
Table 2-334 shows the output parameters of QRY LACP NEIGHBOURS.
2-194
Example
QRY LACP NEIGHBOURS:MEID=0,PORT=1;
Function
Command
QRY LACP PORTCHNL:MEID=<MEID>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-335 shows the input parameters of QRY LACP PORTCHNL.
Output Parameters
Table 2-336 shows the output parameters of QRY LACP PORTCHNL.
2-195
Example
QRY LACP PORTCHNL:MEID=0,PORT=1;
Function
Command
QRY LACPU USERATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MO
DULE>,UNIT=<UNIT>,SUNIT=<SUNIT>;
INPUT PARAMETERS
Table 2-337 shows the input parameters of QRY LACPU USERATE.
2-196
Output Parameters
Table 2-338 shows the output parameters of QRY LACPU USERATE.
Example
QRY LACPU USERATE:MEID=0,SUBSYSTEM=0,MODULE=1,UNIT=1,SUNIT=1;
2-197
Function
Command
QRY LED STATUS:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,TYPE=<TYPE>;
INPUT PARAMETERS
Table 2-339 shows the input parameters of QRY LED STATUS.
Output Parameters
Table 2-340 shows the output parameters of QRY LED STATUS.
Example
QRY LED STATUS:MEID=0,RACK=1,SHELF=1,TYPE=1;
2-198
Function
Command
QRY LSWITCHNUMBER:MEID=<MEID>,QUERYTYPE=<QUERYTYPE>[,SITEID=<SIT
EID>];
INPUT PARAMETERS
Table 2-341 shows the input parameters of QRY LSWITCHNUMBER.
Output Parameters
Table 2-342 shows the output parameters of QRY LSWITCHNUMBER.
2-199
Example
QRY LSWITCHNUMBER:MEID=1,QUERYTYPE=0,SITEID=1;
Function
Command
QRY MACL_ALL_TABLE:MEID=<MEID>;
INPUT PARAMETERS
Table 2-343 shows the input parameters of QRY MACL_ALL_TABLE.
Output Parameters
Table 2-344 shows the output parameters of QRY MACL_ALL_TABLE.
2-200
Example
QRY MACL_ALL_TABLE:MEID=0;
Function
Command
QRY MACL_GROUP_QUERY:MEID=<MEID>;
INPUT PARAMETERS
Table 2-345 shows the input parameters of QRY MACL_GROUP_QUERY.
Output Parameters
Table 2-346 shows the output parameters of QRY MACL_GROUP_QUERY.
2-201
Example
QRY MACL_GROUP_QUERY:MEID=0;
Function
Command
QRY MACL_SPECIFIC_TABLE:MEID=<MEID>,MACL_NAME=<MACL_NAME>;
INPUT PARAMETERS
Table 2-347 shows the input parameters of QRY MACL_SPECIFIC_TABLE.
2-202
Output Parameters
Table 2-348 shows the output parameters of QRY MACL_SPECIFIC_TABLE.
Example
QRY MACL_SPECIFIC_TABLE:MEID=0,MACL_NAME="1";
Function
Command
QRY MEMORYUSERATE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT
=<SLOT>,CPU=<CPU>;
2-203
INPUT PARAMETERS
Table 2-349 shows the input parameters of QRY MEMORYUSERATE.
Output Parameters
Table 2-350 shows the output parameters of QRY MEMORYUSERATE.
2-204
Example
QRY MEMORYUSERATE:MEID=0,RACK=1,SHELF=1,SLOT=1,CPU=1;
Function
Command
QRY MODULESTATUS:MEID=<MEID>,MODULENO=<MODULENO>;
INPUT PARAMETERS
Table 2-351 shows the input parameters of QRY MODULESTATUS.
Output Parameters
Table 2-352 shows the output parameters of QRY MODULESTATUS.
2-205
Example
QRY MODULESTATUS:MEID=0,MODULENO=1;
Function
Command
QRY MSC:MEID=<MEID>,MSCID=<MSCID>;
INPUT PARAMETERS
Table 2-353 shows the input parameters of QRY MSC.
Output Parameters
Table 2-354 shows the output parameters of QRY MSC.
2-206
Example
QRY MSC:MEID=1,MSCID=1;
Function
Command
QRY MTP2LINK STATUS:MEID=<MEID>,GLINKNO=<GLINKNO>;
INPUT PARAMETERS
Table 2-355 shows the input parameters of QRY MTP2LINK STATUS.
Output Parameters
Table 2-356 shows the output parameters of QRY MTP2LINK STATUS.
2-207
Example
QRY MTP2LINK STATUS:MEID=0,GLINKNO="1";
Function
Command
QRY MTP3LINK ERLANG:MEID=<MEID>,LINKNO=<LINKNO>;
INPUT PARAMETERS
Table 2-357 shows the input parameters of QRY MTP3LINK ERLANG.
Output Parameters
Table 2-358 shows the output parameters of QRY MTP3LINK ERLANG.
2-208
Example
QRY MTP3LINK ERLANG:MEID=0,LINKNO=1;
Function
Command
QRY MTP3LINKSETSTATUS:MEID=<MEID>,LINKSETNO=<LINKSETNO>;
INPUT PARAMETERS
Table 2-359 shows the input parameters of QRY MTP3LINKSETSTATUS.
Output Parameters
Table 2-360 shows the output parameters of QRY MTP3LINKSETSTATUS.
2-209
Example
QRY MTP3LINKSETSTATUS:MEID=0,LINKSETNO=1;
Function
Command
QRY NSE:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>;
INPUT PARAMETERS
Table 2-361 shows the input parameters of QRY NSE.
Output Parameters
Table 2-362 shows the output parameters of QRY NSE.
2-210
Example
QRY NSE:MEID=1,SGSNID=1,NSEI=0;
Function
Command
QRY NSVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,NSVCI=<NSVCI>;
INPUT PARAMETERS
Table 2-363 shows the input parameters of QRY NSVC.
Output Parameters
Table 2-364 shows the output parameters of QRY NSVC.
Example
QRY NSVC:MEID=1,SGSNID=1,NSEI=0,NSVCI=0;
2-211
Function
Command
QRY NTPTIME:MEID=<MEID>;
INPUT PARAMETERS
Table 2-365 shows the input parameters of QRY NTPTIME.
Output Parameters
Table 2-366 shows the output parameters of QRY NTPTIME.
Example
QRY NTPTIME:MEID=0;
2-212
Function
Command
QRY OFFICE ALL STATUS:MEID=<MEID>;
INPUT PARAMETERS
Table 2-367 shows the input parameters of QRY OFFICE ALL STATUS.
Output Parameters
Table 2-368 shows the output parameters of QRY OFFICE ALL STATUS.
Example
QRY OFFICE ALL STATUS:MEID=0;
2-213
Function
Command
QRY OFFICE STATUS:MEID=<MEID>,OFFICEID=<OFFICEID>;
INPUT PARAMETERS
Table 2-369 shows the input parameters of QRY OFFICE STATUS.
Output Parameters
Table 2-370 shows the output parameters of QRY OFFICE STATUS.
Example
QRY OFFICE STATUS:MEID=0,OFFICEID=1;
2-214
Function
Command
QRY OMPMTP3LINKSTATUS:MEID=<MEID>,LINKNO=<LINKNO>;
INPUT PARAMETERS
Table 2-371 shows the input parameters of QRY OMPMTP3LINKSTATUS.
Output Parameters
Table 2-372 shows the output parameters of QRY OMPMTP3LINKSTATUS.
Example
QRY OMPMTP3LINKSTATUS:MEID=0,LINKNO="1"&"1";
2-215
Function
Command
QRY PATHBAND:MEID=<MEID>,ANI=<ANI>,TRPATHID=<TRPATHID>;
INPUT PARAMETERS
Table 2-373 shows the input parameters of QRY PATHBAND.
Output Parameters
Table 2-374 shows the output parameters of QRY PATHBAND.
2-216
Example
QRY PATHBAND:MEID=0,ANI="0",TRPATHID="0";
Function
Command
QRY PATHGPBAND:MEID=<MEID>,TRPATHGPID=<TRPATHGPID>;
INPUT PARAMETERS
Table 2-375 shows the input parameters of QRY PATHGPBAND.
Output Parameters
Table 2-376 shows the output parameters of QRY PATHGPBAND.
2-217
2-218
Example
QRY PATHGPBAND:MEID=0,TRPATHGPID="0";
2-219
Function
Command
QRY PATH STATUS:MEID=<MEID>,ANI=<ANI>,PATHID=<PATHID>;
INPUT PARAMETERS
Table 2-377 shows the input parameters of QRY PATH STATUS.
Output Parameters
Table 2-378 shows the output parameters of QRY PATH STATUS.
Example
QRY PATH STATUS:MEID=0,ANI=0,PATHID=0;
2-220
Function
Command
QRY PATH STATUS ALL:MEID=<MEID>,MODULE=<MODULE>;
INPUT PARAMETERS
Table 2-379 shows the input parameters of QRY PATH STATUS ALL.
Output Parameters
Table 2-380 shows the output parameters of QRY PATH STATUS ALL.
Example
QRY PATH STATUS ALL:MEID=0,MODULE=1;
2-221
Function
Command
QRY PHYCPU USERATE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<S
LOT>,CPU=<CPU>;
INPUT PARAMETERS
Table 2-381 shows the input parameters of QRY PHYCPU USERATE.
Output Parameters
Table 2-382 shows the output parameters of QRY PHYCPU USERATE.
2-222
Example
QRY PHYCPU USERATE:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0;
Function
Command
QRY POLICYMAP EPU:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE=<MO
DULE>,UNIT=<UNIT>,SUNIT=<SUNIT>;
INPUT PARAMETERS
Table 2-383 shows the input parameters of QRY POLICYMAP EPU.
Output Parameters
Table 2-384 shows the output parameters of QRY POLICYMAP EPU.
2-223
Example
QRY POLICYMAP EPU:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=65535,SUNIT=2
55;
2-224
Function
Command
QRY POLICYMAP RPU:MEID=<MEID>;
INPUT PARAMETERS
Table 2-385 shows the input parameters of QRY POLICYMAP RPU.
Output Parameters
Table 2-386 shows the output parameters of QRY POLICYMAP RPU.
2-225
Example
QRY POLICYMAP RPU:MEID=0;
Function
Command
QRY PROCPURATE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>;
INPUT PARAMETERS
Table 2-387 shows the input parameters of QRY PROCPURATE.
Output Parameters
Table 2-388 shows the output parameters of QRY PROCPURATE.
2-226
Example
QRY PROCPURATE:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0;
Function
Command
QRY PSCELLDSP:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>;
INPUT PARAMETERS
Table 2-389 shows the input parameters of QRY PSCELLDSP.
2-227
Output Parameters
Table 2-390 shows the output parameters of QRY PSCELLDSP.
Example
QRY PSCELLDSP:MEID=1,SITEID=1,BTSID=1;
Function
Command
QRY PTP ALL INTF CFG:MEID=<MEID>,IGNOREFLAG=<IGNOREFLAG>;
2-228
INPUT PARAMETERS
Table 2-391 shows the input parameters of QRY PTP ALL INTF CFG.
Output Parameters
Table 2-392 shows the output parameters of QRY PTP ALL INTF CFG.
2-229
Example
QRY PTP ALL INTF CFG:MEID=0,IGNOREFLAG=;
Function
Command
QRY PTP ALL PORT STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE
=<MODULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-393 shows the input parameters of QRY PTP ALL PORT STATE.
2-230
Output Parameters
Table 2-394 shows the output parameters of QRY PTP ALL PORT STATE.
Example
QRY PTP ALL PORT STATE:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=65535,SUN
IT=255,IGNOREFLAG=;
Function
Command
QRY PTP EBEST:MEID=<MEID>;
INPUT PARAMETERS
Table 2-395 shows the input parameters of QRY PTP EBEST.
2-231
Output Parameters
Table 2-396 shows the output parameters of QRY PTP EBEST.
Example
QRY PTP EBEST:MEID=0;
Function
Command
QRY PTP GLOBA CFG:MEID=<MEID>;
INPUT PARAMETERS
Table 2-397 shows the input parameters of QRY PTP GLOBA CFG.
2-232
Output Parameters
Table 2-398 shows the output parameters of QRY PTP GLOBA CFG.
Example
QRY PTP GLOBA CFG:MEID=0;
2-233
Function
Command
QRY PTP ONE PORT STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MODULE
=<MODULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,LOCALPORT=<LOCALPORT>;
INPUT PARAMETERS
Table 2-399 shows the input parameters of QRY PTP ONE PORT STATE.
Output Parameters
Table 2-400 shows the output parameters of QRY PTP ONE PORT STATE.
2-234
Example
QRY PTP ONE PORT STATE:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=65535,SUN
IT=255,LOCALPORT=0;
Function
Command
QRY PTP UNICAST NEGOTIATION:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,MO
DULE=<MODULE>,UNIT=<UNIT>,SUNIT=<SUNIT>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-401 shows the input parameters of QRY PTP UNICAST NEGOTIATION.
Output Parameters
Table 2-402 shows the output parameters of QRY PTP UNICAST NEGOTIATION.
2-235
Example
QRY PTP UNICAST NEGOTIATION:MEID=0,SUBSYSTEM=255,MODULE=1,UNIT=655
35,SUNIT=255,IGNOREFLAG=;
Function
Command
QRY PVCSTATUS:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PVCID
=<PVCID>;
INPUT PARAMETERS
Table 2-403 shows the input parameters of QRY PVCSTATUS.
2-236
Output Parameters
Table 2-404 shows the output parameters of QRY PVCSTATUS.
Example
QRY PVCSTATUS:MEID=0,SUBSYSTEM="0",UNIT="1",PVCID="1"&"1";
Function
Command
QRY RING:MEID=<MEID>,RINGID=<RINGID>;
2-237
INPUT PARAMETERS
Table 2-405 shows the input parameters of QRY RING.
Output Parameters
Table 2-406 shows the output parameters of QRY RING.
Example
QRY RING:MEID=1,RINGID=1;
Function
Command
QRY RNC:MEID=<MEID>;
INPUT PARAMETERS
Table 2-407 shows the input parameters of QRY RNC.
2-238
Output Parameters
Table 2-408 shows the output parameters of QRY RNC.
Example
QRY RNC:MEID=0;
Function
Command
QRY RPU INTERFACE:MEID=<MEID>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-409 shows the input parameters of QRY RPU INTERFACE.
2-239
Output Parameters
Table 2-410 shows the output parameters of QRY RPU INTERFACE.
2-240
Example
QRY RPU INTERFACE:MEID=0,IGNOREFLAG=;
Function
Command
QRY RPU ROUTE:MEID=<MEID>,IGNOREFLAG=<IGNOREFLAG>;
INPUT PARAMETERS
Table 2-411 shows the input parameters of QRY RPU ROUTE.
Output Parameters
Table 2-412 shows the output parameters of QRY RPU ROUTE.
2-241
Example
QRY RPU ROUTE:MEID=0,IGNOREFLAG=;
Function
Command
QRY RRUTRX:MEID=<MEID>,SITEID=<SITEID>;
INPUT PARAMETERS
Table 2-413 shows the input parameters of QRY RRUTRX.
Output Parameters
Table 2-414 shows the output parameters of QRY RRUTRX.
2-242
Example
QRY RRUTRX:MEID=0,SITEID=1;
Function
Command
QRY SAAL LMLINK CFG:MEID=<MEID>,SSCOPGLINKNO=<SSCOPGLINKNO>;
INPUT PARAMETERS
Table 2-415 shows the input parameters of QRY SAAL LMLINK CFG.
2-243
Output Parameters
Table 2-416 shows the output parameters of QRY SAAL LMLINK CFG.
Example
QRY SAAL LMLINK CFG:MEID=0,SSCOPGLINKNO="1"&"1";
2-244
Function
Command
QRY SAAL LMLINK STATUS:MEID=<MEID>,SSCOPGLINKNO=<SSCOPGLINKNO>;
INPUT PARAMETERS
Table 2-417 shows the input parameters of QRY SAAL LMLINK STATUS.
Output Parameters
Table 2-418 shows the output parameters of QRY SAAL LMLINK STATUS.
Example
QRY SAAL LMLINK STATUS:MEID=0,SSCOPGLINKNO="1"&"1";
2-245
Function
Command
QRY SBCXSTATUS:MEID=<MEID>;
INPUT PARAMETERS
Table 2-419 shows the input parameters of QRY SBCXSTATUS.
Output Parameters
Table 2-420 shows the output parameters of QRY SBCXSTATUS.
Example
QRY SBCXSTATUS:MEID=0;
2-246
Function
Command
QRY SCTP ALL:MEID=<MEID>;
INPUT PARAMETERS
Table 2-421 shows the input parameters of QRY SCTP ALL.
Output Parameters
Table 2-422 shows the output parameters of QRY SCTP ALL.
Example
QRY SCTP ALL:MEID=0;
Function
Command
QRY SCTP BY ASSOCIATION:MEID=<MEID>,ULPID=<ULPID>,MODULE=<MODULE
>;
2-247
INPUT PARAMETERS
Table 2-423 shows the input parameters of QRY SCTP BY ASSOCIATION.
Output Parameters
Table 2-424 shows the output parameters of QRY SCTP BY ASSOCIATION.
2-248
2-249
Example
QRY SCTP BY ASSOCIATION:MEID=0,ULPID=1,MODULE=1;
Function
Command
QRY SCTP BY MODULE:MEID=<MEID>,MODULE=<MODULE>,SUBSYSTEM=<SUBS
YSTEM>,UNIT=<UNIT>,SUNIT=<SUNIT>,ASSOCTYPE=<ASSOCTYPE>;
INPUT PARAMETERS
Table 2-425 shows the input parameters of QRY SCTP BY MODULE.
Output Parameters
Table 2-426 shows the output parameters of QRY SCTP BY MODULE.
2-250
Example
QRY SCTP BY MODULE:MEID=0,MODULE=1,SUBSYSTEM=0,UNIT=1,SUNIT=1,ASS
OCTYPE=0;
Function
Command
QRY SCTP BY PORT:MEID=<MEID>,LOCALPORT=<LOCALPORT>,DESTPORT=<DES
TPORT>,LOCALIP=<LOCALIP>,PEERIP=<PEERIP>;
INPUT PARAMETERS
Table 2-427 shows the input parameters of QRY SCTP BY PORT.
2-251
Output Parameters
Table 2-428 shows the output parameters of QRY SCTP BY PORT.
2-252
2-253
Example
QRY SCTP BY PORT:MEID=0,LOCALPORT=1,DESTPORT="1",LOCALIP="1.1.1.1",PE
ERIP="1.1.1.1";
Function
Command
QRY SGSN:MEID=<MEID>,SGSNID=<SGSNID>;
INPUT PARAMETERS
Table 2-429 shows the input parameters of QRY SGSN.
Output Parameters
Table 2-430 shows the output parameters of QRY SGSN.
Example
QRY SGSN:MEID=1,SGSNID=1;
2-254
Function
Command
QRY SGSNENDPOINT:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>;
INPUT PARAMETERS
Table 2-431 shows the input parameters of QRY SGSNENDPOINT.
Output Parameters
Table 2-432 shows the output parameters of QRY SGSNENDPOINT.
Example
QRY SGSNENDPOINT:MEID=1,SGSNID=1,NSEI=0;
2-255
Function
Command
QRY SLAVESTATUS:MEID=<MEID>,SUBSYSTEMNO=<SUBSYSTEMNO>,UNITNO=<U
NITNO>;
INPUT PARAMETERS
Table 2-433 shows the input parameters of QRY SLAVESTATUS.
Output Parameters
Table 2-434 shows the output parameters of QRY SLAVESTATUS.
2-256
Example
QRY SLAVESTATUS:MEID=0,SUBSYSTEMNO=0,UNITNO=1;
Function
Command
QRY SMPMTP3LINKSTATUS:MEID=<MEID>,LINKNO=<LINKNO>;
INPUT PARAMETERS
Table 2-435 shows the input parameters of QRY SMPMTP3LINKSTATUS.
Output Parameters
Table 2-436 shows the output parameters of QRY SMPMTP3LINKSTATUS.
2-257
Example
QRY SMPMTP3LINKSTATUS:MEID=0,LINKNO="1"&"1";
Function
Command
QRY SPDINFO:MEID=<MEID>,TYPE=<TYPE>[,PHYADDRESS=<PHYADDRESS>][,BOA
RDTYPE=<BOARDTYPE>][,ELECTRONICLABEL=<ELECTRONICLABEL>];
INPUT PARAMETERS
Table 2-437 shows the input parameters of QRY SPDINFO.
Output Parameters
Table 2-438 shows the output parameters of QRY SPDINFO.
2-258
Example
QRY SPDINFO:MEID=0,TYPE="0",PHYADDRESS="1/2/1",BOARDTYPE="EAPB",ELE
CTRONICLABEL="49-50-51-52-53-54";
2-259
Function
Command
QRY SSCOPLINK CFG:MEID=<MEID>,SSCOPGLINKNO=<SSCOPGLINKNO>;
INPUT PARAMETERS
Table 2-439 shows the input parameters of QRY SSCOPLINK CFG.
Output Parameters
Table 2-440 shows the output parameters of QRY SSCOPLINK CFG.
2-260
Example
QRY SSCOPLINK CFG:MEID=0,SSCOPGLINKNO="1"&"1";
Function
Command
QRY SSCOPLINK STATUS:MEID=<MEID>,SSCOPGLINKNO=<SSCOPGLINKNO>;
INPUT PARAMETERS
Table 2-441 shows the input parameters of QRY SSCOPLINK STATUS.
2-261
Output Parameters
Table 2-442 shows the output parameters of QRY SSCOPLINK STATUS.
Example
QRY SSCOPLINK STATUS:MEID=0,SSCOPGLINKNO="1"&"1";
Function
Command
QRY SUNITSTATUS:MEID=<MEID>,MODULENO=<MODULENO>,SUBSYSTEMNO
=<SUBSYSTEMNO>,UNITNO=<UNITNO>,SUNITNNO=<SUNITNNO>,SUNITTYPE=<SU
NITTYPE>;
2-262
INPUT PARAMETERS
Table 2-443 shows the input parameters of QRY SUNITSTATUS.
Output Parameters
Table 2-444 shows the output parameters of QRY SUNITSTATUS.
Example
QRY SUNITSTATUS:MEID=0,MODULENO=1,SUBSYSTEMNO=0,UNITNO=1,SUNITN
NO="1"&"1",SUNITTYPE=;
2-263
Function
Command
QRY SUPERVLAN IPPORT:MEID=<MEID>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-445 shows the input parameters of QRY SUPERVLAN IPPORT.
Output Parameters
Table 2-446 shows the output parameters of QRY SUPERVLAN IPPORT.
2-264
Example
QRY SUPERVLAN IPPORT:MEID=0,PORT=1;
Function
Command
QRY SUPERVLAN MEMBER:MEID=<MEID>,PORT=<PORT>;
INPUT PARAMETERS
Table 2-447 shows the input parameters of QRY SUPERVLAN MEMBER.
2-265
Output Parameters
Table 2-448 shows the output parameters of QRY SUPERVLAN MEMBER.
Example
QRY SUPERVLAN MEMBER:MEID=0,PORT=1;
Function
Command
QRY TC STATE:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,IMACHIP
=<IMACHIP>,E1INDEX=<E1INDEX>;
2-266
INPUT PARAMETERS
Table 2-449 shows the input parameters of QRY TC STATE.
Output Parameters
Table 2-450 shows the output parameters of QRY TC STATE.
Example
QRY TC STATE:MEID=0,SUBSYSTEM="0",UNIT=1,IMACHIP=1,E1INDEX=1;
2-267
Function
Command
QRY TIME:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT>,CPU=<C
PU>;
INPUT PARAMETERS
Table 2-451 shows the input parameters of QRY TIME.
Output Parameters
Table 2-452 shows the output parameters of QRY TIME.
2-268
Example
QRY TIME:MEID=0,RACK=1,SHELF=1,SLOT=1,CPU=1;
Function
Command
QRY TRX:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-453 shows the input parameters of QRY TRX.
Output Parameters
Table 2-454 shows the output parameters of QRY TRX.
2-269
Example
QRY TRX:MEID=1,SITEID=1,BTSID=1,TRXID=1;
Function
Command
QRY TRXRRU:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-455 shows the input parameters of QRY TRXRRU.
2-270
Output Parameters
Table 2-456 shows the output parameters of QRY TRXRRU.
Example
QRY TRX:MEID=1,SITEID=1,BTSID=1,TRXID=1;
2.14.130 QRY TS
Shortcut
QRY TS
Function
Command
QRY TS:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-457 shows the input parameters of QRY TS.
2-271
Output Parameters
Table 2-458 shows the output parameters of QRY TS.
Example
QRY TS:MEID=1,SITEID=1,BTSID=1,TRXID=1;
Function
Command
QRY TSCHAN:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-459 shows the input parameters of QRY TSCHAN.
2-272
Output Parameters
Table 2-460 shows the output parameters of QRY TSCHAN.
Example
QRY TSCHAN:MEID=1,SITEID=1,BTSID=1,TRXID=1;
Function
Command
QRY UNITSTATUS:MEID=<MEID>,MODULENO=<MODULENO>,SUBSYSTEMNO=<S
UBSYSTEMNO>,UNITNO=<UNITNO>;
INPUT PARAMETERS
Table 2-461 shows the input parameters of QRY UNITSTATUS.
2-273
Output Parameters
Table 2-462 shows the output parameters of QRY UNITSTATUS.
Example
QRY UNITSTATUS:MEID=0,MODULENO=1,SUBSYSTEMNO=0,UNITNO=1;
Function
Command
QRY V2BTSINFO:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,SHELFNO
=<SHELFNO>,PANELNO=<PANELNO>;
2-274
INPUT PARAMETERS
Table 2-463 shows the input parameters of QRY V2BTSINFO.
Output Parameters
Table 2-464 shows the output parameters of QRY V2BTSINFO.
2-275
Example
QRY V2BTSINFO:MEID=0,SITEID=1,RACKNO=1,SHELFNO=1,PANELNO=1;
2.14.134 QUERY
Shortcut
QUERY
Function
Command
QUERY:[MOC=<MOC>][,MOI=<MOI>][,ATTRIBUTES=<ATTRIBUTES>][,EXTENDS=<E
XTENDS>][,WHERE=<WHERE>];
INPUT PARAMETERS
Table 2-465 shows the input parameters of QUERY.
2-276
Output Parameters
Table 2-466 shows the output parameters of QUERY.
Example
QUERY:MOC="SubNetwork",MOI="SubNetwork=1"; Result ------ SUBNETWORKTYPE Su
bNetwork SMOI USERLABEL MOI ----------------------------------------------------------------------
-------------------------- 1 0 0 lily SubNetwork=0 1 1 1 22 SubNetwork=1 ------;
Function
Command
QUERY ALLPKG:MEID=<MEID>,ISOMP=<ISOMP>;
INPUT PARAMETERS
Table 2-467 shows the input parameters of QUERY ALLPKG.
2-277
Output Parameters
Table 2-468 shows the output parameters of QUERY ALLPKG.
Example
QUERY ALLPKG:MEID=85,ISOMP=YES;
2-278
Function
Command
QUERY CELLCHANNEL:MEID=<MEID>,CID=<CID>,CHNLID=<CHNLID>,CHANTYPE
=<CHANTYPE>;
INPUT PARAMETERS
Table 2-469 shows the input parameters of QUERY CELLCHANNEL.
Output Parameters
Table 2-470 shows the output parameters of QUERY CELLCHANNEL.
2-279
Example
QUERY CELLCHANNEL:MEID=0,CID=0,CHNLID=0,CHANTYPE=0;
Function
Command
QUERY CREATED VERSION:MEID=<MEID>;
INPUT PARAMETERS
Table 2-471 shows the input parameters of QUERY CREATED VERSION.
Output Parameters
Table 2-472 shows the output parameters of QUERY CREATED VERSION.
2-280
Example
QUERY CREATED VERSION:MEID=0;
Function
Command
QUERY DDM:MOC=<MOC>,MOI=<MOI>[,ATTRIBUTES=<ATTRIBUTES>][,EXTENDS
=<EXTENDS>],TYPE=<TYPE>[,WHERE=<WHERE>];
INPUT PARAMETERS
Table 2-473 shows the input parameters of QUERY DDM.
Output Parameters
Table 2-474 shows the output parameters of QUERY DDM.
2-281
Example
QUERY DDM:MOC="1",MOI="1",ATTRIBUTES="1",EXTENDS="1",TYPE="1",WHERE
="1";
Function
Command
QUERY IUBLINK:MEID=<MEID>,NODEBNO=<NODEBNO>,PORTTYPE=<PORTTYPE
>,PORTID=<PORTID>;
INPUT PARAMETERS
Table 2-475 shows the input parameters of QUERY IUBLINK.
Output Parameters
Table 2-476 shows the output parameters of QUERY IUBLINK.
2-282
Example
QUERY IUBLINK:MEID=0,NODEBNO=0,PORTTYPE=0,PORTID=0;
2.14.140 QUERYMSG
Shortcut
QUERYMSG
Function
Command
Function
Command
QUERY PMDATA:MEASTYPE=<MEASTYPE>,STARTTIME=<STARTTIME>,ENDTIME
=<ENDTIME>[,INTERVAL=<INTERVAL>];
INPUT PARAMETERS
Table 2-477 shows the input parameters of QUERY PMDATA.
2-283
Output Parameters
Table 2-478 shows the output parameters of QUERY PMDATA.
Example
QUERY PMDATA:MEASTYPE="5",STARTTIME=,ENDTIME=,INTERVAL="0";
Function
Command
QUERY RUNNING:MEID=<MEID>,ISOMP=<ISOMP>,PHYSADDRESS=<PHYSADDRE
SS>;
INPUT PARAMETERS
Table 2-479 shows the input parameters of QUERY RUNNING.
2-284
Output Parameters
Table 2-480 shows the output parameters of QUERY RUNNING.
Example
QUERY RUNNING:MEID=85,ISOMP=YES,PHYSADDRESS="1/1/1/1";
2-285
Function
Command
QUERY SNAPSHOT:[MOC=<MOC>][,MOI=<MOI>][,ATTRIBUTES=<ATTRIBUTES>][,EX
TENDS=<EXTENDS>][,WHERE=<WHERE>];
INPUT PARAMETERS
Table 2-481 shows the input parameters of QUERY SNAPSHOT.
Output Parameters
Table 2-482 shows the output parameters of QUERY SNAPSHOT.
Example
QUERY SNAPSHOT:MOC="SubNetwork",MOI="SubNetwork=1"; Result ------ SUBNETWO
RKTYPE SubNetwork SMOI USERLABEL MOI -----------------------------------------------------
------------------------------------------- 1 0 0 lily SubNetwork=0 1 1 1 22 SubNetwork=1 ------;
2-286
Function
Command
QUERY UTRANCELLFDD:MEID=<MEID>,CID=<CID>;
INPUT PARAMETERS
Table 2-483 shows the input parameters of QUERY UTRANCELLFDD.
Output Parameters
Table 2-484 shows the output parameters of QUERY UTRANCELLFDD.
Example
QUERY UTRANCELLFDD:MEID=0,CID=0;
2-287
Function
Command
QUERY VERFILE:MEID=<MEID>,ISOMP=<ISOMP>,PKGID=<PKGID>,PKGNAME=<P
KGNAME>;
INPUT PARAMETERS
Table 2-485 shows the input parameters of QUERY VERFILE.
Output Parameters
Table 2-486 shows the output parameters of QUERY VERFILE.
2-288
Example
QUERY VERFILE:MEID=85,ISOMP=YES,PKGID=1,PKGNAME="0";
2.15 R
2.15.1 RECFG NSE
Shortcut
RECFG NSE
Function
Command
RECFG NSE:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,RECONFIGTYPE=<RE
CONFIGTYPE>;
INPUT PARAMETERS
Table 2-487 shows the input parameters of RECFG NSE.
Output Parameters
Table 2-488 shows the output parameters of RECFG NSE.
2-289
Example
RECFG NSE:MEID=1,SGSNID=1,NSEI=0,RECONFIGTYPE=0;
Function
Command
RELEASE MUTEXRIGHT:[SUBNET=<SUBNET>][,NE=<NE>];
INPUT PARAMETERS
Table 2-489 shows the input parameters of RELEASE MUTEXRIGHT.
Output Parameters
Table 2-490 shows the output parameters of RELEASE MUTEXRIGHT.
2-290
Example
RELEASE MUTEXRIGHT:SUBNET=0,NE=0; Result ------ Succeed in releasing mutex righ
t. ------ ;
Function
Command
REPAIR PMDATA:ABSENTOBJ=<ABSENTOBJ>,ABSENTSTART=<ABSENTSTART>,A
BSENTEND=<ABSENTEND>,DAYSAGO=<DAYSAGO>;
INPUT PARAMETERS
Table 2-491 shows the input parameters of REPAIR PMDATA.
Output Parameters
Table 2-492 shows the output parameters of REPAIR PMDATA.
2-291
Example
REPAIR PMDATA:ABSENTOBJ="6,21,30",ABSENTSTART="2010-06-11 14:00:00",ABS
ENTEND="2010-06-11 15:00:00",DAYSAGO=3;
2.15.4 RESET
Shortcut
RESET
Function
Command
Function
Command
RESET IUBLINK:MEID=<MEID>,NODEBNO=<NODEBNO>;
INPUT PARAMETERS
Table 2-493 shows the input parameters of RESET IUBLINK.
Output Parameters
Table 2-494 shows the output parameters of RESET IUBLINK.
2-292
Example
RESET IUBLINK:MEID=0,NODEBNO=0;
Function
Command
RESET IUCSLINK:MEID=<MEID>,MCC=<MCC>,MNC=<MNC>,CNID=<CNID>,RESET
TYPE=<RESETTYPE>;
INPUT PARAMETERS
Table 2-495 shows the input parameters of RESET IUCSLINK.
Output Parameters
Table 2-496 shows the output parameters of RESET IUCSLINK.
2-293
Example
RESET IUCSLINK:MEID=0,MCC=0,MNC=0,CNID=0,RESETTYPE=0;
Function
Command
RESET IUPSLINK:MEID=<MEID>,MCC=<MCC>,MNC=<MNC>,CNID=<CNID>,RESET
TYPE=<RESETTYPE>;
INPUT PARAMETERS
Table 2-497 shows the input parameters of RESET IUPSLINK.
Output Parameters
Table 2-498 shows the output parameters of RESET IUPSLINK.
2-294
Example
RESET IUPSLINK:MEID=0,MCC=0,MNC=0,CNID=0,RESETTYPE=0;
2.15.8 RESETLINK
Shortcut
RESETLINK
Function
Command
Function
Command
RESET UTRANCELLFDD:MEID=<MEID>,CID=<CID>;
INPUT PARAMETERS
Table 2-499 shows the input parameters of RESET UTRANCELLFDD.
2-295
Output Parameters
Table 2-500 shows the output parameters of RESET UTRANCELLFDD.
Example
RESET UTRANCELLFDD:MEID=0,CID=0;
2.15.10 RESTORE
Shortcut
RESTORE
Function
Command
RESTORE:POS=[<SUBNET>]-<NE>,FILENAME=<FILENAME>;
INPUT PARAMETERS
Table 2-501 shows the input parameters of RESTORE.
Output Parameters
Table 2-502 shows the output parameters of RESTORE.
2-296
Example
RESTORE:POS=0-0,FILENAME ="ConfigData_20110510_100929.zip";<MESSAGE>[] Nam
e |Status |Progress |Detail ------------------------------------------------- Restore data Running 1 Su
bNetwork=1,SDRMEID=0 ------------------------------------------------- ...... ...... ...... <MESSAGE
>[] Name |Status |Progress |;
Function
Command
RST ACIRC:MEID=<MEID>,OFFICEID=<OFFICEID>,N7PCM=<N7PCM>,TS=<TS>;
INPUT PARAMETERS
Table 2-503 shows the input parameters of RST ACIRC.
Output Parameters
Table 2-504 shows the output parameters of RST ACIRC.
2-297
Example
RST ACIRC:MEID=1,OFFICEID=0,N7PCM=0,TS=1;
Function
Command
RST BVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,BVCI=<BVCI>;
INPUT PARAMETERS
Table 2-505 shows the input parameters of RST BVC.
Output Parameters
Table 2-506 shows the output parameters of RST BVC.
2-298
Example
RST BVC:MEID=1,SGSNID=1,NSEI=0,BVCI=2;
Function
Command
RST BVCSIG:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>;
INPUT PARAMETERS
Table 2-507 shows the input parameters of RST BVCSIG.
Output Parameters
Table 2-508 shows the output parameters of RST BVCSIG.
2-299
Example
RST BVCSIG:MEID=1,SGSNID=1,NSEI=0;
Function
Command
RST IPRES:MEID=<MEID>,MSCID=<MSCID>,CALLID=<CALLID>;
INPUT PARAMETERS
Table 2-509 shows the input parameters of RST IPRES.
Output Parameters
Table 2-510 shows the output parameters of RST IPRES.
2-300
Example
RST IPRES:MEID=1,MSCID=1,CALLID="0";
Function
Command
RST MSC:MEID=<MEID>,MSCID=<MSCID>,ATYPE=<ATYPE>;
INPUT PARAMETERS
Table 2-511 shows the input parameters of RST MSC.
Output Parameters
Table 2-512 shows the output parameters of RST MSC.
2-301
Example
RST MSC:MEID=0,MSCID=0,ATYPE=0;
Function
Command
RST NSVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,NSVCI=<NSVCI>;
INPUT PARAMETERS
Table 2-513 shows the input parameters of RST NSVC.
Output Parameters
Table 2-514 shows the output parameters of RST NSVC.
Example
RST NSVC:MEID=1,SGSNID=1,NSEI=0,NSVCI=0;
2-302
2.15.17 RST TC
Shortcut
RST TC
Function
Command
RST TC:MEID=<MEID>,TCOFFICEID=<TCOFFICEID>;
INPUT PARAMETERS
Table 2-515 shows the input parameters of RST TC.
Output Parameters
Table 2-516 shows the output parameters of RST TC.
Example
RST TC:MEID=1,TCOFFICEID=0;
2-303
2.16 S
2.16.1 SET ALLNE RESET
Shortcut
SET ALLNE RESET
Function
Command
SET ALLNE RESET:MEID=<MEID>;
INPUT PARAMETERS
Table 2-517 shows the input parameters of SET ALLNE RESET.
Output Parameters
Table 2-518 shows the output parameters of SET ALLNE RESET.
Example
SET ALLNE RESET:MEID=0;
2-304
Function
Command
SET APS CHANGE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>,LCPU=<LCPU>,APSCHANGEOVER=<APSCHANGEOVER>,GRPNO
=<GRPNO>,CHNLNO=<CHNLNO>;
INPUT PARAMETERS
Table 2-519 shows the input parameters of SET APS CHANGE.
Output Parameters
Table 2-520 shows the output parameters of SET APS CHANGE.
2-305
Example
SET APS CHANGE:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0,LCPU=0,APSCHANG
EOVER=0,GRPNO=1,CHNLNO=0;
Function
Command
SET ASPACTIVE:MEID=<MEID>,ASID=<ASID>,ASPID=<ASPID>;
INPUT PARAMETERS
Table 2-521 shows the input parameters of SET ASPACTIVE.
Output Parameters
Table 2-522 shows the output parameters of SET ASPACTIVE.
2-306
Example
SET ASPACTIVE:MEID=0,ASID=1,ASPID=1;
Function
Command
SET ASPDEACTIVE:MEID=<MEID>,ASID=<ASID>,ASPID=<ASPID>;
INPUT PARAMETERS
Table 2-523 shows the input parameters of SET ASPDEACTIVE.
Output Parameters
Table 2-524 shows the output parameters of SET ASPDEACTIVE.
2-307
Example
SET ASPDEACTIVE:MEID=0,ASID=1,ASPID=1;
Function
Command
SET ASPDOWN:MEID=<MEID>,ASPID=<ASPID>;
INPUT PARAMETERS
Table 2-525 shows the input parameters of SET ASPDOWN.
Output Parameters
Table 2-526 shows the output parameters of SET ASPDOWN.
2-308
Example
SET ASPDOWN:MEID=0,ASPID=1;
Function
Command
SET ASPUP:MEID=<MEID>,ASPID=<ASPID>;
INPUT PARAMETERS
Table 2-527 shows the input parameters of SET ASPUP.
Output Parameters
Table 2-528 shows the output parameters of SET ASPUP.
2-309
Example
SET ASPUP:MEID=0,ASPID=1;
Function
Command
SET BLOCKSUNIT:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,SUNI
T=<SUNIT>,SUNITTYPE=<SUNITTYPE>;
INPUT PARAMETERS
Table 2-529 shows the input parameters of SET BLOCKSUNIT.
Output Parameters
Table 2-530 shows the output parameters of SET BLOCKSUNIT.
2-310
Example
SET BLOCKSUNIT:MEID=0,SUBSYSTEM=0,UNIT=1,SUNIT="1"&"1",SUNITTYPE=1;
Function
Command
SET BLOCKUNIT:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>;
INPUT PARAMETERS
Table 2-531 shows the input parameters of SET BLOCKUNIT.
Output Parameters
Table 2-532 shows the output parameters of SET BLOCKUNIT.
2-311
Example
SET BLOCKUNIT:MEID=0,SUBSYSTEM=0,UNIT=1;
Function
Command
SET BOARDPOWEROFF:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<S
LOT>[,FRU=<FRU>][,BLADEFRUACTIVATION=<BLADEFRUACTIVATION>];
INPUT PARAMETERS
Table 2-533 shows the input parameters of SET BOARDPOWEROFF.
Output Parameters
Table 2-534 shows the output parameters of SET BOARDPOWEROFF.
2-312
Example
SET BOARDPOWEROFF:MEID=0,RACK="0",SHELF="0",SLOT="0",FRU="0",BLADE
FRUACTIVATION="0";
Function
Command
SET BOARDPOWERON:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SL
OT>[,FRU=<FRU>][,BLADEFRUACTIVATIONPOLICY=<BLADEFRUACTIVATIONPOLIC
Y>];
INPUT PARAMETERS
Table 2-535 shows the input parameters of SET BOARDPOWERON.
Output Parameters
Table 2-536 shows the output parameters of SET BOARDPOWERON.
2-313
Example
SET BOARDPOWERON:MEID=0,RACK="0",SHELF="0",SLOT="0",FRU="0",BLADEF
RUACTIVATIONPOLICY="0";
Function
Command
SET BOOT:MEID=<MEID>,BOARDTYPE=<BOARDTYPE>,BOOTTYPE=<BOOTTYPE>,I
SOMP=<ISOMP>;
INPUT PARAMETERS
Table 2-537 shows the input parameters of SET BOOT.
Output Parameters
Table 2-538 shows the output parameters of SET BOOT.
2-314
Example
SET BOOT MODE:MEID=85,BOARDTYPE=1,BOOTTYPE=0;
Function
Command
SET CANCEL IMAGROUP TEST:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT
=<UNIT>,IMACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-539 shows the input parameters of SET CANCEL IMAGROUP TEST.
Output Parameters
Table 2-540 shows the output parameters of SET CANCEL IMAGROUP TEST.
2-315
Example
SET CANCEL IMAGROUP TEST:MEID=0,SUBSYSTEM=0,UNIT=1,IMACHIP=1,IMAGR
P=1;
Function
Command
SET CEIDOPR RESET:MEID=<MEID>,ANI=<ANI>,PATHID=<PATHID>,CID=<CID>;
INPUT PARAMETERS
Table 2-541 shows the input parameters of SET CEIDOPR RESET.
2-316
Output Parameters
Table 2-542 shows the output parameters of SET CEIDOPR RESET.
Example
SET CEIDOPR RESET:MEID=0,ANI=0,PATHID=0,CID=0;
Function
Command
SET CEID STOP RESET:MEID=<MEID>,ANI=<ANI>,PATHID=<PATHID>,CID=<CID>;
INPUT PARAMETERS
Table 2-543 shows the input parameters of SET CEID STOP RESET.
2-317
Output Parameters
Table 2-544 shows the output parameters of SET CEID STOP RESET.
Example
SET CEID STOP RESET:MEID=0,ANI=0,PATHID=0,CID=0;
Function
Command
SET CLOCKBASE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT>,C
PU=<CPU>,LCPU=<LCPU>,CLKGBASE=<CLKGBASE>;
INPUT PARAMETERS
Table 2-545 shows the input parameters of SET CLOCKBASE.
2-318
Output Parameters
Table 2-546 shows the output parameters of SET CLOCKBASE.
Example
SET CLOCKBASE:MEID=0,RACK=1,SHELF=1,SLOT=1,CPU=1,LCPU=1,CLKGBASE
=;
2-319
Function
Command
SET DISLOOP ALLUNIT:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SL
OT>,CPU=<CPU>;
INPUT PARAMETERS
Table 2-547 shows the input parameters of SET DISLOOP ALLUNIT.
Output Parameters
Table 2-548 shows the output parameters of SET DISLOOP ALLUNIT.
Example
SET DISLOOP ALLUNIT:MEID=0,RACK=1,SHELF=1,SLOT=1,CPU=1;
2-320
Function
Command
SET ECMM CONFIG:MEID=<MEID>[,CMMNETID=<CMMNETID>][,OMMTYPE=<OMM
TYPE>][,CMMMGRFLAG=<CMMMGRFLAG>][,SNTPINFO=[<SNTPSERVERADDR>][-<SN
TPSYNCYCLE>][-<SNTPALARM>][-<SNTPACCESSTYPE>]][,TRAPADDRES=[<SERVERIP
>][-<SERVERPORT>]][,BOARDINFO=[<SLOT>][-<BOARDTYPE>][-<BUREAU>][-<BOOTTY
PE>][-<POWERON>][-<POWEROFF>]];
INPUT PARAMETERS
Table 2-549 shows the input parameters of SET ECMM CONFIG.
2-321
Output Parameters
Table 2-550 shows the output parameters of SET ECMM CONFIG.
2-322
Example
SET ECMM CONFIG:MEID=85,CMMNETID=1,OMMTYPE=OMM_TYPE_INNER_BASE,C
MMMGRFLAG=SM_BRDMGR_OMP,SNTPINFO="128.128.31.1"-"1800000"-"2097151"-"SN
TP_ACCESS_TYPE_OMC",TRAPADDRES="129.200.0.1"-"169",BOARDINFO="1"-"CMM_
BOARD_TYPE_PP"-"1"-"BOOT_TYPE_FAST"-"POWER_ON_INDIRECT"-"POWER_OFF_BY
_CMM_ENABLE"&"1"-"CMM_BOARD_TYPE_PP"-"1"-"BOOT_TYPE_FAST"-"POWER_ON_
INDIRECT"-"POWER_OFF_BY_CMM_ENABLE";
Function
Command
SET FORCECHANGE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>,LCPU=<LCPU>;
INPUT PARAMETERS
Table 2-551 shows the input parameters of SET FORCECHANGE.
Output Parameters
Table 2-552 shows the output parameters of SET FORCECHANGE.
2-323
Example
SET FORCECHANGE:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0,LCPU=0;
Function
Command
SET FORCERESET:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>,LCPU=<LCPU>;
INPUT PARAMETERS
Table 2-553 shows the input parameters of SET FORCERESET.
2-324
Output Parameters
Table 2-554 shows the output parameters of SET FORCERESET.
Example
SET FORCERESET:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0,LCPU=0;
Function
Command
SET INHIBIT IMAGROUP:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT
>,IMACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-555 shows the input parameters of SET INHIBIT IMAGROUP.
2-325
Output Parameters
Table 2-556 shows the output parameters of SET INHIBIT IMAGROUP.
Example
SET INHIBIT IMAGROUP:MEID=0,SUBSYSTEM=0,UNIT=1,IMACHIP=1,IMAGRP=1;
Function
Command
SET INHIBITIMALINK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,I
MACHIP=<IMACHIP>,E1INDEX=<E1INDEX>;
INPUT PARAMETERS
Table 2-557 shows the input parameters of SET INHIBITIMALINK.
2-326
Output Parameters
Table 2-558 shows the output parameters of SET INHIBITIMALINK.
Example
SET INHIBITIMALINK:MEID=0,SUBSYSTEM="0",UNIT="0",IMACHIP=1,E1INDEX=1;
2.16.22 SETLOG
Shortcut
SETLOG
2-327
Function
Command
SETLOG:RETAINTIME=<RETAINTIME>;
INPUT PARAMETERS
Table 2-559 shows the input parameters of SETLOG.
Output Parameters
Table 2-560 shows the output parameters of SETLOG.
Example
SETLOG:RETAINTIME=1; SETLOG:CAPACITY=1000;
Function
Command
SET LOOP SUNITTS:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,SUNIT=<SUNIT>[,TS=<TS
>],LOOPTYPE=<LOOPTYPE>,SUNITTYPE=<SUNITTYPE>;
2-328
INPUT PARAMETERS
Table 2-561 shows the input parameters of SET LOOP SUNITTS.
Output Parameters
Table 2-562 shows the output parameters of SET LOOP SUNITTS.
2-329
Example
SET LOOP SUNITTS:MEID=0,RACK=1,SHELF=1,SLOT=1,CPU=1,SUBSYSTEM=0,UNI
T=1,SUNIT=9,TS=0,LOOPTYPE=0,SUNITTYPE=;
Function
Command
SET MTP3ALLLINK ACTIVATE:MEID=<MEID>;
INPUT PARAMETERS
Table 2-563 shows the input parameters of SET MTP3ALLLINK ACTIVATE.
Output Parameters
Table 2-564 shows the output parameters of SET MTP3ALLLINK ACTIVATE.
2-330
Example
SET MTP3ALLLINK ACTIVATE:MEID=0;
Function
Command
SET MTP3ALLLINK DEACTIVATE:MEID=<MEID>;
INPUT PARAMETERS
Table 2-565 shows the input parameters of SET MTP3ALLLINK DEACTIVATE.
Output Parameters
Table 2-566 shows the output parameters of SET MTP3ALLLINK DEACTIVATE.
2-331
Example
SET MTP3ALLLINK DEACTIVATE:MEID=0;
Function
Command
SET MTP3LINK ACTIVE:MEID=<MEID>,LINKNO=<LINKNO>;
INPUT PARAMETERS
Table 2-567 shows the input parameters of SET MTP3LINK ACTIVE.
Output Parameters
Table 2-568 shows the output parameters of SET MTP3LINK ACTIVE.
Example
SET MTP3LINK ACTIVE:MEID=0,LINKNO=1;
2-332
Function
Command
SET MTP3LINK DEACTIVE:MEID=<MEID>,LINKNO=<LINKNO>;
INPUT PARAMETERS
Table 2-569 shows the input parameters of SET MTP3LINK DEACTIVE.
Output Parameters
Table 2-570 shows the output parameters of SET MTP3LINK DEACTIVE.
Example
SET MTP3LINK DEACTIVE:MEID=0,LINKNO=1;
2-333
Function
Command
SET MTP3LINK INHIBIT:MEID=<MEID>,LINKNO=<LINKNO>;
INPUT PARAMETERS
Table 2-571 shows the input parameters of SET MTP3LINK INHIBIT.
Output Parameters
Table 2-572 shows the output parameters of SET MTP3LINK INHIBIT.
Example
SET MTP3LINK INHIBIT:MEID=0,LINKNO=1;
Function
Command
SET MTP3LINK UNINHIBIT:MEID=<MEID>,LINKNO=<LINKNO>;
2-334
INPUT PARAMETERS
Table 2-573 shows the input parameters of SET MTP3LINK UNINHIBIT.
Output Parameters
Table 2-574 shows the output parameters of SET MTP3LINK UNINHIBIT.
Example
SET MTP3LINK UNINHIBIT:MEID=0,LINKNO=1;
Function
Command
SET NORMALCHANGE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SL
OT>,CPU=<CPU>,LCPU=<LCPU>;
INPUT PARAMETERS
Table 2-575 shows the input parameters of SET NORMALCHANGE.
2-335
Output Parameters
Table 2-576 shows the output parameters of SET NORMALCHANGE.
Example
SET NORMALCHANGE:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0,LCPU=0;
2-336
Function
Command
SET NORMALRESET:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT=<SLOT
>,CPU=<CPU>,LCPU=<LCPU>;
INPUT PARAMETERS
Table 2-577 shows the input parameters of SET NORMALRESET.
Output Parameters
Table 2-578 shows the output parameters of SET NORMALRESET.
Example
SET NORMALRESET:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0,LCPU=0;
2-337
Function
Command
SET NTPSYN:MEID=<MEID>;
INPUT PARAMETERS
Table 2-579 shows the input parameters of SET NTPSYN.
Output Parameters
Table 2-580 shows the output parameters of SET NTPSYN.
Example
SET NTPSYN:MEID=0;
2-338
Function
Command
SET PARAM:ID=<ID>,VALUE=<VALUE>;
INPUT PARAMETERS
Table 2-581 shows the input parameters of SET PARAM.
Output Parameters
Table 2-582 shows the output parameters of SET PARAM.
2 ID STRING ID 1-1
Example
SET PARAM:ID=0,VALUE=0;
2-339
Function
Command
SET PATHOPR BLOCK:MEID=<MEID>,PATHID=<PATHID>,ANI=<ANI>;
INPUT PARAMETERS
Table 2-583 shows the input parameters of SET PATHOPR BLOCK.
Output Parameters
Table 2-584 shows the output parameters of SET PATHOPR BLOCK.
Example
SET PATHOPR BLOCK:MEID=0,PATHID=0,ANI=0;
2-340
Function
Command
SET PATHOPR UNBLOCK:MEID=<MEID>,PATHID=<PATHID>,ANI=<ANI>;
INPUT PARAMETERS
Table 2-585 shows the input parameters of SET PATHOPR UNBLOCK.
Output Parameters
Table 2-586 shows the output parameters of SET PATHOPR UNBLOCK.
Example
SET PATHOPR UNBLOCK:MEID=0,PATHID=1,ANI=0;
2-341
Function
Command
SET PP2S BASE EXCHANGE:MEID=<MEID>,RACK=<RACK>,SHELF=<SHELF>,SLOT
=<SLOT>,CPU=<CPU>,LCPU=<LCPU>,CLKGBASE=<CLKGBASE>;
INPUT PARAMETERS
Table 2-587 shows the input parameters of SET PP2S BASE EXCHANGE.
Output Parameters
Table 2-588 shows the output parameters of SET PP2S BASE EXCHANGE.
2-342
Example
SET PP2S BASE EXCHANGE:MEID=0,RACK=0,SHELF=0,SLOT=0,CPU=0,LCPU=0,CL
KGBASE=0;
Function
Command
SET RESTART IMAGROUP:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNI
T>,IMACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-589 shows the input parameters of SET RESTART IMAGROUP.
Output Parameters
Table 2-590 shows the output parameters of SET RESTART IMAGROUP.
2-343
Example
SET RESTART IMAGROUP:MEID=0,SUBSYSTEM=0,UNIT=1,IMACHIP=1,IMAGRP=1;
Function
Command
SET RUNBATCH PERIODIC POLICY:POLICYNAME=<POLICYNAME>[,POLICYSTAT
US=<POLICYSTATUS>][,STARTTIME=<STARTTIME>][,INTERVALTIME=[<DAY>][-<HOU
R>][-<MINUTE>][-<SECOND>]][,FILENAME=<FILENAME>][,ARGS=<ARGS>];
INPUT PARAMETERS
Table 2-591 shows the input parameters of SET RUNBATCH PERIODIC POLICY.
2-344
Output Parameters
Table 2-592 shows the output parameters of SET RUNBATCH PERIODIC POLICY.
Example
SET RUNBATCH PERIODIC POLICY:POLICYNAME="aaa",POLICYSTATUS=Suspend;
Function
Command
SET RUNBATCH TIMING POLICY:POLICYNAME=<POLICYNAME>[,POLICYSTATU
S=<POLICYSTATUS>][,ONLYONCE=<ONLYONCE>][,FILENAME=<FILENAME>][,ARGS
=<ARGS>];
INPUT PARAMETERS
Table 2-593 shows the input parameters of SET RUNBATCH TIMING POLICY.
2-345
2-346
Output Parameters
Table 2-594 shows the output parameters of SET RUNBATCH TIMING POLICY.
Table 2-594 SET RUNBATCH TIMING POLICY OUTPUT PARAMETERS
Example
SET RUNBATCH TIMING POLICY:POLICYNAME="aaa",POLICYSTATUS=Active ,ON
LYONCE="2008-10-17 15:27:36" ,FILENAME="test.txt";;
Function
Command
SET SBCXCHANGE:MEID=<MEID>;
INPUT PARAMETERS
Table 2-595 shows the input parameters of SET SBCXCHANGE.
Table 2-595 SET SBCXCHANGE Input Parameters
Output Parameters
Table 2-596 shows the output parameters of SET SBCXCHANGE.
2-347
Example
QRY SBCXSTATUS:MEID=0;
Function
Command
SET SCTP ABORT:MEID=<MEID>,ASSOCID=<ASSOCID>;
INPUT PARAMETERS
Table 2-597 shows the input parameters of SET SCTP ABORT.
Output Parameters
Table 2-598 shows the output parameters of SET SCTP ABORT.
2-348
Example
SET SCTP ABORT:MEID=0,ASSOCID=1;
Function
Command
SET SCTP ABORT ALL:MEID=<MEID>;
INPUT PARAMETERS
Table 2-599 shows the input parameters of SET SCTP ABORT ALL.
Output Parameters
Table 2-600 shows the output parameters of SET SCTP ABORT ALL.
2-349
Example
SET SCTP ABORT ALL:MEID=0;
Function
Command
SET SCTP ESTABLISH:MEID=<MEID>,ASSOCID=<ASSOCID>;
INPUT PARAMETERS
Table 2-601 shows the input parameters of SET SCTP ESTABLISH.
Output Parameters
Table 2-602 shows the output parameters of SET SCTP ESTABLISH.
2-350
Example
SET SCTP ESTABLISH:MEID=0,ASSOCID=1;
Function
Command
SET SCTP ESTABLISH ALL:MEID=<MEID>;
INPUT PARAMETERS
Table 2-603 shows the input parameters of SET SCTP ESTABLISH ALL.
Output Parameters
Table 2-604 shows the output parameters of SET SCTP ESTABLISH ALL.
2-351
Example
SET SCTP ESTABLISH ALL:MEID=0;
Function
Command
SET SCTP SHUTDOWN:MEID=<MEID>,ASSOCID=<ASSOCID>;
INPUT PARAMETERS
Table 2-605 shows the input parameters of SET SCTP SHUTDOWN.
2-352
Output Parameters
Table 2-606 shows the output parameters of SET SCTP SHUTDOWN.
Example
SET SCTP SHUTDOWN:MEID=0,ASSOCID=1;
Function
Command
SET SCTP SHUTDOWN ALL:MEID=<MEID>;
INPUT PARAMETERS
Table 2-607 shows the input parameters of SET SCTP SHUTDOWN ALL.
2-353
Output Parameters
Table 2-608 shows the output parameters of SET SCTP SHUTDOWN ALL.
Example
SET SCTP SHUTDOWN ALL:MEID=0;
Function
Command
SET SITEMS:PRODUCT=<PRODUCT>,MEID=<MEID>,SITEID=<SITEID>,MAINTAINST
ATUS=<MAINTAINSTATUS>[,CONFIGSET=<CONFIGSET>];
INPUT PARAMETERS
Table 2-609 shows the input parameters of SET SITEMS.
2-354
Output Parameters
Table 2-610 shows the output parameters of SET SITEMS.
Example
SET SITEMS:PRODUCT="1",MEID="0",SITEID="0",MAINTAINSTATUS="1",CONFIG
SET=1;
Function
Command
SET SLAVEOPR:MEID=<MEID>,SUBSYSTEMNO=<SUBSYSTEMNO>,UNITNO=<UNITN
O>;
INPUT PARAMETERS
Table 2-611 shows the input parameters of SET SLAVEOPR.
2-355
Output Parameters
Table 2-612 shows the output parameters of SET SLAVEOPR.
Example
SET SLAVEOPR:MEID=0,SUBSYSTEMNO=0,UNITNO=1;
Function
Command
SET SSNBLOCKOPR:MEID=<MEID>,SSNNO=<SSNNO>;
INPUT PARAMETERS
Table 2-613 shows the input parameters of SET SSNBLOCKOPR.
2-356
Output Parameters
Table 2-614 shows the output parameters of SET SSNBLOCKOPR.
Example
SET SSNBLOCKOPR:MEID=0,SSNNO=2;
Function
Command
SET SSNUNBLOCKOPR:MEID=<MEID>,SSNNO=<SSNNO>;
INPUT PARAMETERS
Table 2-615 shows the input parameters of SET SSNUNBLOCKOPR.
2-357
Output Parameters
Table 2-616 shows the output parameters of SET SSNUNBLOCKOPR.
Table 2-616 SET SSNUNBLOCKOPR OUTPUT PARAMETERS
Example
SET SSNUNBLOCKOPR:MEID=0,SSNNO=2;
Function
Command
SET START IMAGROUP TEST:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<U
NIT>,IMACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-617 shows the input parameters of SET START IMAGROUP TEST.
2-358
Output Parameters
Table 2-618 shows the output parameters of SET START IMAGROUP TEST.
Example
SET START IMAGROUP TEST:MEID=0,SUBSYSTEM="0",UNIT="1",IMACHIP="1",IM
AGRP="1";
Function
Command
SET TASK:TASKID=<TASKID>[,TASKTYPE=<TASKTYPE>][,MEASOBJLIST=<MEASO
BJLIST>][,TASKNAME=<TASKNAME>][,STARTDATE=<STARTDATE>][,ENDDATE=<EN
DDATE>][,DATEMASK=<DATEMASK>][,TIMEMASK=<TIMEMASK>];
INPUT PARAMETERS
Table 2-619 shows the input parameters of SET TASK.
2-359
Output Parameters
Table 2-620 shows the output parameters of SET TASK.
Example
Function
Command
SET TASKFINISH:TASKID=<BEGINID>[-<ENDID>];
2-360
INPUT PARAMETERS
Table 2-621 shows the input parameters of SET TASKFINISH.
Output Parameters
Table 2-622 shows the output parameters of SET TASKFINISH.
Example
e.g.1:SET TASKFINISH:TASKID=125; SET TASKFINISH:125; e.g.2:SET TASKFINISH:100-1
20&150-155&200&210;
Function
Command
SET TASKSTATUS:TASKID=<BEGINID>[-<ENDID>],STATUS=<STATUS>;
INPUT PARAMETERS
Table 2-623 shows the input parameters of SET TASKSTATUS.
2-361
Output Parameters
Table 2-624 shows the output parameters of SET TASKSTATUS.
Example
e.g.1:SET TASKSTATUS:TASKID=125,STATUS=ACTIVE; SET TASKSTATUS:125,ACTIVE;
SET TASKSTATUS:125,0; e.g.2:SET TASKSTATUS:TASKID=100-120&150-155,STATUS=
ACTIVE; SET TASKSTATUS:100-120&150-155,0; e.g.3:SET TASKSTATUS:TASKID=100-12
0&145&148,STATUS=SUSPENSIVE; SET TASKSTATUS:100-120&145&148,1;
Function
Command
SET UNBLOCKSUNIT:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,SU
NIT=<SUNIT>,SUNITTYPE=<SUNITTYPE>;
INPUT PARAMETERS
Table 2-625 shows the input parameters of SET UNBLOCKSUNIT.
2-362
Output Parameters
Table 2-626 shows the output parameters of SET UNBLOCKSUNIT.
Example
SET UNBLOCKSUNIT:MEID=0,SUBSYSTEM=0,UNIT=1,SUNIT="1"&"1",SUNITTYPE
="4";
Function
Command
SET UNBLOCKUNIT:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>;
2-363
INPUT PARAMETERS
Table 2-627 shows the input parameters of SET UNBLOCKUNIT.
Output Parameters
Table 2-628 shows the output parameters of SET UNBLOCKUNIT.
Example
SET UNBLOCKUNIT:MEID=0,SUBSYSTEM=0,UNIT=1;
Function
Command
SET UNINHIBIT IMAGROUP:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UN
IT>,IMACHIP=<IMACHIP>,IMAGRP=<IMAGRP>;
INPUT PARAMETERS
Table 2-629 shows the input parameters of SET UNINHIBIT IMAGROUP.
2-364
Output Parameters
Table 2-630 shows the output parameters of SET UNINHIBIT IMAGROUP.
Example
SET UNINHIBIT IMAGROUP:MEID=0,SUBSYSTEM=0,UNIT=1,IMACHIP=1,IMAGRP
=1;
2-365
Function
Command
SET UNINHIBITIMALINK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT
>,IMACHIP=<IMACHIP>,E1INDEX=<E1INDEX>;
INPUT PARAMETERS
Table 2-631 shows the input parameters of SET UNINHIBITIMALINK.
Output Parameters
Table 2-632 shows the output parameters of SET UNINHIBITIMALINK.
Example
SET UNINHIBITIMALINK:MEID=0,SUBSYSTEM="0",UNIT="0",IMACHIP=1,E1INDE
X=1;
2-366
Function
Command
SHOW ALARMDETAIL:ID=<ID>,SERVERID=<SERVERID>;
INPUT PARAMETERS
Table 2-633 shows the input parameters of SHOW ALARMDETAIL.
Output Parameters
Table 2-634 shows the output parameters of SHOW ALARMDETAIL.
2-367
Example
SHOW ALARMDETAIL:ID=-9223372036854775808,SERVERID="1";
Function
Command
SHOW ALLROLE;
Output Parameters
Table 2-635 shows the output parameters of SHOW ALLROLE.
Example
SHOW ALLROLE;
2-368
Function
Command
SHOW ALLROLESET;
Output Parameters
Table 2-636 shows the output parameters of SHOW ALLROLESET.
Table 2-636 SHOW ALLROLESET OUTPUT PARAMETERS
Example
SHOW ALLROLESET;
Function
Command
SHOW ALLSESSION;
Output Parameters
Table 2-637 shows the output parameters of SHOW ALLSESSION.
Table 2-637 SHOW ALLSESSION OUTPUT PARAMETERS
2-369
Example
SHOW ALLSESSION;
Function
Command
SHOW ALLUSER;
Output Parameters
Table 2-638 shows the output parameters of SHOW ALLUSER.
Example
SHOW ALLUSER;
2-370
Function
Command
SHOW CURRENTALARM:[ALARMTYPE=<ALARMTYPE>][,SEVERITY=<SEVERITY
>][,OCCURBEGINTIME=<OCCURBEGINTIME>][,OCCURENDTIME=<OCCURENDTIME
>][,SOURCE=<SOURCE>][,ALARMCODE=<ALARMCODE>][,CAUSECODE=<CAUSECO
DE>][,ACKSTATE=<ACKSTATE>][,CONFIRMBEGINTIME=<CONFIRMBEGINTIME>][,C
ONFIRMENDTIME=<CONFIRMENDTIME>][,ISVISIBLE=<ISVISIBLE>][,SYSTEMTYPE
=<SYSTEMTYPE>];
INPUT PARAMETERS
Table 2-639 shows the input parameters of SHOW CURRENTALARM.
2-371
Output Parameters
Table 2-640 shows the output parameters of SHOW CURRENTALARM.
2-372
Example
SHOW CURRENTALARM:ALARMTYPE="",SEVERITY=,OCCURBEGINTIME=,OCCU
RENDTIME=,SOURCE="0",ALARMCODE="0",CAUSECODE="0",ACKSTATE=,CONFI
RMBEGINTIME=,CONFIRMENDTIME=,ISVISIBLE=True,SYSTEMTYPE=0;
Function
Command
SHOW DEPARTMENT : NAME=<NAME>;
INPUT PARAMETERS
Table 2-641 shows the input parameters of SHOW DEPARTMENT.
Output Parameters
Table 2-642 shows the output parameters of SHOW DEPARTMENT.
Example
SHOW DEPARTMENT:NAME="1";
2-373
Function
Command
SHOW HISTORYALARM:[ALARMTYPE=<ALARMTYPE>][,SEVERITY=<SEVERITY
>][,OCCURBEGINTIME=<OCCURBEGINTIME>][,OCCURENDTIME=<OCCURENDTIME
>][,RESTOREBEGINTIME=<RESTOREBEGINTIME>][,RESTOREENDTIME=<RESTOREE
NDTIME>][,SOURCE=<SOURCE>][,ALARMCODE=<ALARMCODE>][,CAUSECODE=<C
AUSECODE>][,ACKSTATE=<ACKSTATE>][,CONFIRMBEGINTIME=<CONFIRMBEGINT
IME>][,CONFIRMENDTIME=<CONFIRMENDTIME>][,ISVISIBLE=<ISVISIBLE>][,SYSTE
MTYPE=<SYSTEMTYPE>];
INPUT PARAMETERS
Table 2-643 shows the input parameters of SHOW HISTORYALARM.
2-374
Output Parameters
Table 2-644 shows the output parameters of SHOW HISTORYALARM.
2-375
Example
SHOW HISTORYALARM:ALARMTYPE="",SEVERITY=,OCCURBEGINTIME=,OCCU
RENDTIME=,RESTOREBEGINTIME=,RESTOREENDTIME=,SOURCE="0",ALARMCO
DE="0",CAUSECODE="0",ACKSTATE=,CONFIRMBEGINTIME=,CONFIRMENDTIME
=,ISVISIBLE=True,SYSTEMTYPE=0;
Function
Command
SHOW POLICY:[POLICYNAME=<POLICYNAME>];
INPUT PARAMETERS
Table 2-645 shows the input parameters of SHOW POLICY.
2-376
Output Parameters
Table 2-646 shows the output parameters of SHOW POLICY.
Example
SHOW POLICY:POLICYNAME="aaa";
Function
Command
SHOW ROLE : NAME=<NAME>;
INPUT PARAMETERS
Table 2-647 shows the input parameters of SHOW ROLE.
2-377
Output Parameters
Table 2-648 shows the output parameters of SHOW ROLE.
Example
SHOW ROLE : NAME="1";
Function
Command
SHOW ROLESET : NAME=<NAME>;
INPUT PARAMETERS
Table 2-649 shows the input parameters of SHOW ROLESET.
Output Parameters
Table 2-650 shows the output parameters of SHOW ROLESET.
2-378
Example
SHOW ROLESET:NAME="1";
Function
Command
SHOW TASK:TASKID=<TASKID>;
INPUT PARAMETERS
Table 2-651 shows the input parameters of SHOW TASK.
Output Parameters
Table 2-652 shows the output parameters of SHOW TASK.
2-379
Example
SHOW TASK:TASKID=125; SHOW TASK:125;
Function
Command
SHOW USER : NAME=<NAME>;
INPUT PARAMETERS
Table 2-653 shows the input parameters of SHOW USER.
2-380
Output Parameters
Table 2-654 shows the output parameters of SHOW USER.
Example
SHOW USER:NAME="1";
2-381
Function
Command
SPY ABISRS:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,BIEPCM=<BIE
PCM>;
INPUT PARAMETERS
Table 2-655 shows the input parameters of SPY ABISRS.
Output Parameters
Table 2-656 shows the output parameters of SPY ABISRS.
Example
SPY ABISRS:MEID=1,SITEID=1,RACKNO=1,BIEPCM=1;
2-382
Function
Command
SPY ATRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>;
INPUT PARAMETERS
Table 2-657 shows the input parameters of SPY ATRUNK.
Output Parameters
Table 2-658 shows the output parameters of SPY ATRUNK.
Example
SPY ATRUNK:MEID=1,SUBSYSTEM=1,UNIT="1";
2-383
Function
Command
SPY TRX:SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-659 shows the input parameters of SPY TRX.
Output Parameters
Table 2-660 shows the output parameters of SPY TRX.
Example
SPY TRX:SITEID="1"&"1",BTSID="1"&"1",TRXID="1"&"1";
2-384
Function
Command
QRY APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PCM
>;
INPUT PARAMETERS
Table 2-661 shows the input parameters of STA IPA.
Table 2-661 STA IPA Input Parameters
Output Parameters
Table 2-662 shows the output parameters of STA IPA.
2-385
Example
START IPASPCONN:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=0;
Function
Command
Function
Command
STOP FLOWCTL:MEID=<MEID>,MODULE=<MODULE>;
INPUT PARAMETERS
Table 2-663 shows the input parameters of STOP FLOWCTL.
Output Parameters
Table 2-664 shows the output parameters of STOP FLOWCTL.
2-386
Example
STOP FLOWCTL:MEID=1,MODULE=1;
Function
Command
STOP IPA:MEID=<MEID>,IMSI=<IMSI>;
INPUT PARAMETERS
Table 2-665 shows the input parameters of STOP IPA.
Output Parameters
Table 2-666 shows the output parameters of STOP IPA.
2-387
Example
STOP IPA:MEID=1,IMSI=1;
Function
Command
STP ABISRS:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,BIEPCM=<BIEP
CM>;
INPUT PARAMETERS
Table 2-667 shows the input parameters of STP ABISRS.
Output Parameters
Table 2-668 shows the output parameters of STP ABISRS.
2-388
Example
STP ABISRS:MEID=0,SITEID=1,RACKNO=1,BIEPCM=1;
Function
Command
STP ATRUNKSPY:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM
=<PCM>;
INPUT PARAMETERS
Table 2-669 shows the input parameters of STP ATRUNKSPY.
Output Parameters
Table 2-670 shows the output parameters of STP ATRUNKSPY.
2-389
Example
STP ATRUNKSPY:MEID=0,SUBSYSTEM=1,UNIT=1,PCM=0;
Function
Command
STP TRXSPY:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-671 shows the input parameters of STP TRXSPY.
Output Parameters
Table 2-672 shows the output parameters of STP TRXSPY.
Example
STP TRXSPY:MEID=0,SITEID=1,BTSID=1,TRXID=1;
2-390
Function
Command
SWITCH SATELLITE:MEID=<MEID>,SITEID=<SITEID>;
INPUT PARAMETERS
Table 2-673 shows the input parameters of SWITCH SATELLITE.
Output Parameters
Table 2-674 shows the output parameters of SWITCH SATELLITE.
Example
SWITCH SATELLITE:MEID=1,SITEID=1;
2.16.83 SYNC
Shortcut
SYNC
2-391
Function
Command
SYNC:[POS=[<SUBNET>][-<NE>]],TYPE=<TYPE>,SYNCTYPE=<SYNCTYPE>[,RUNMO
DE=<RUNMODE>];
INPUT PARAMETERS
Table 2-675 shows the input parameters of SYNC.
Output Parameters
Table 2-676 shows the output parameters of SYNC.
Example
SYNC:POS=0-1,TYPE=255,SYNCTYPE=0;
2.17 U
2.17.1 UNB ABIS
Shortcut
UNB ABIS
2-392
Function
Command
UNB ABIS:MEID=<MEID>,SITEID=<SITEID>,RACKNO=<RACKNO>,BIEPCM=<BIEPC
M>,BIETS=<BIETS>,BIESUBTS=<BIESUBTS>;
INPUT PARAMETERS
Table 2-677 shows the input parameters of UNB ABIS.
Output Parameters
Table 2-678 shows the output parameters of UNB ABIS.
Example
UNB ABIS:MEID=1,SITEID=1,RACKNO=1,BIEPCM=1,BIETS=1,BIESUBTS=0;
2-393
Function
Command
UNB APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PCM>;
INPUT PARAMETERS
Table 2-679 shows the input parameters of UNB APCM.
Output Parameters
Table 2-680 shows the output parameters of UNB APCM.
Example
UNB APCM:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9;
2-394
Function
Command
UNB ARESPCM:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>;
INPUT PARAMETERS
Table 2-681 shows the input parameters of UNB ARESPCM.
Output Parameters
Table 2-682 shows the output parameters of UNB ARESPCM.
Example
UNB ARESPCM:MEID=1,OFFICEID=0,MSCPCM=0;
2-395
Function
Command
UNB ARESTRUNK:MEID=<MEID>,OFFICEID=<OFFICEID>,MSCPCM=<MSCPCM>,CI
CNO=<CICNO>;
INPUT PARAMETERS
Table 2-683 shows the input parameters of UNB ARESTRUNK.
Output Parameters
Table 2-684 shows the output parameters of UNB ARESTRUNK.
Example
UNB ARESTRUNK:MEID=1,OFFICEID=0,MSCPCM=0,CICNO=1;
2-396
Function
Command
UNB ATERPCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<P
CM>;
INPUT PARAMETERS
Table 2-685 shows the input parameters of UNB ATERPCM.
Output Parameters
Table 2-686 shows the output parameters of UNB ATERPCM.
Example
UNB ATERPCM:MEID=0,SUBSYSTEM=0,UNIT=1,PCM=9;
2-397
Function
Command
UNB ATERTRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM
=<PCM>,TS=<TS>,SUBTS=<SUBTS>;
INPUT PARAMETERS
Table 2-687 shows the input parameters of UNB ATERTRUNK.
Output Parameters
Table 2-688 shows the output parameters of UNB ATERTRUNK.
Example
UNB ATERTRUNK:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9,TS=1,SUBTS=0;
2-398
Function
Command
UNB ATRUNK:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PC
M>,TS=<TS>;
INPUT PARAMETERS
Table 2-689 shows the input parameters of UNB ATRUNK.
Output Parameters
Table 2-690 shows the output parameters of UNB ATRUNK.
Example
UNB ATRUNK:MEID=1,SUBSYSTEM=0,UNIT=1,PCM=9,TS=1;
2-399
Function
Command
UNB BVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,BVCI=<BVCI>;
INPUT PARAMETERS
Table 2-691 shows the input parameters of UNB BVC.
Output Parameters
Table 2-692 shows the output parameters of UNB BVC.
Example
UNB BVC:MEID=1,SGSNID=1,NSEI=0,BVCI=2;
2-400
Function
Command
UNB CELL:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>;
INPUT PARAMETERS
Table 2-693 shows the input parameters of UNB CELL.
Output Parameters
Table 2-694 shows the output parameters of UNB CELL.
Example
UNB CELL:MEID=0,SITEID=1,BTSID=1;
2-401
Function
Command
UNB CUTRX:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-695 shows the input parameters of UNB CUTRX.
Output Parameters
Table 2-696 shows the output parameters of UNB CUTRX.
Example
UNB CUTRX:MEID=1,SITEID=1,BTSID=1,TRXID=1;
2-402
Function
Command
UNB FUTRX:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>;
INPUT PARAMETERS
Table 2-697 shows the input parameters of UNB FUTRX.
Output Parameters
Table 2-698 shows the output parameters of UNB FUTRX.
Example
UNB FUTRX:MEID=1,SITEID=1,BTSID=1,TRXID=1;
2-403
Function
Command
UNB IPA:MEID=<MEID>,UNIT=<UNIT>,SLAVESUNIT=<SLAVESUNIT>;
INPUT PARAMETERS
Table 2-699 shows the input parameters of UNB IPA.
Output Parameters
Table 2-700 shows the output parameters of UNB IPA.
Example
UNB IPA:MEID=1,UNIT=1,SLAVESUNIT=1;
2-404
Function
Command
UNB NSVC:MEID=<MEID>,SGSNID=<SGSNID>,NSEI=<NSEI>,NSVCI=<NSVCI>;
INPUT PARAMETERS
Table 2-701 shows the input parameters of UNB NSVC.
Output Parameters
Table 2-702 shows the output parameters of UNB NSVC.
Example
UNB NSVC:MEID=1,SGSNID=1,NSEI=0,NSVCI=0;
2.17.14 UNB TS
Shortcut
UNB TS
2-405
Function
Command
UNB TS:MEID=<MEID>,SITEID=<SITEID>,BTSID=<BTSID>,TRXID=<TRXID>,TSID=<TS
ID>;
INPUT PARAMETERS
Table 2-703 shows the input parameters of UNB TS.
Output Parameters
Table 2-704 shows the output parameters of UNB TS.
Example
UNB TS:MEID=1,SITEID=1,BTSID=1,TRXID=1,TSID=0;
2-406
Function
Command
UNEQP APCM:MEID=<MEID>,SUBSYSTEM=<SUBSYSTEM>,UNIT=<UNIT>,PCM=<PC
M>;
INPUT PARAMETERS
Table 2-705 shows the input parameters of UNEQP APCM.
Output Parameters
Table 2-706 shows the output parameters of UNEQP APCM.
Example
UNEQP APCM:MEID=0,SUBSYSTEM=0,UNIT=1,PCM=9;
2-407
Function
Command
UNLD MSC:MEID=<MEID>,MSCID=<MSCID>;
INPUT PARAMETERS
Table 2-707 shows the input parameters of UNLD MSC.
Output Parameters
Table 2-708 shows the output parameters of UNLD MSC.
Example
UNLD MSC:MEID=1,MSCID=1;
Function
Command
UNLD SGSN:MEID=<MEID>,SGSNID=<SGSNID>;
2-408
INPUT PARAMETERS
Table 2-709 shows the input parameters of UNLD SGSN.
Output Parameters
Table 2-710 shows the output parameters of UNLD SGSN.
Example
UNLD SGSN:MEID=1,SGSNID=1;
Function
Command
UNUSE MSC:MEID=<MEID>,MSCID=<MSCID>;
INPUT PARAMETERS
Table 2-711 shows the input parameters of UNUSE MSC.
2-409
Output Parameters
Table 2-712 shows the output parameters of UNUSE MSC.
Example
UNUSE MSC:MEID=1,MSCID=1;
Function
Command
UNUSE SGSN:MEID=<MEID>,SGSNID=<SGSNID>;
INPUT PARAMETERS
Table 2-713 shows the input parameters of UNUSE SGSN.
2-410
Output Parameters
Table 2-714 shows the output parameters of UNUSE SGSN.
Example
UNUSE SGSN:MEID=1,SGSNID=1;
2.17.20 UPDATE
Shortcut
UPDATE
Function
Command
UPDATE:[MOC=<MOC>][,MOI=<MOI>][,ATTRIBUTES=<ATTRIBUTES>][,EXTENDS=<E
XTENDS>];
INPUT PARAMETERS
Table 2-715 shows the input parameters of UPDATE.
2-411
Output Parameters
Table 2-716 shows the output parameters of UPDATE.
Example
UPDATE:MOC=%MOC%,MOI=%MOI%,ATTRIBUTES="ConfigSet=4,ISMAIN=1,STATUS
=0,SWVERSION=v10.03.01,USERLABEL=TestForUpdate"; Result ------ Success in updating.
------;
Function
Command
USE MSC:MEID=<MEID>,MSCID=<MSCID>;
INPUT PARAMETERS
Table 2-717 shows the input parameters of USE MSC.
2-412
Output Parameters
Table 2-718 shows the output parameters of USE MSC.
Example
USE MSC:MEID=1,MSCID=1;
Function
Command
USE SGSN:MEID=<MEID>,SGSNID=<SGSNID>;
INPUT PARAMETERS
Table 2-719 shows the input parameters of USE SGSN.
Output Parameters
Table 2-720 shows the output parameters of USE SGSN.
2-413
Example
USE SGSN:MEID=1,SGSNID=1;
2.18 V
2.18.1 VALIDATE VERSION
Shortcut
VALIDATE VERSION
Function
Command
VALIDATE VERSION:MEID=<MEID>,ISOMP=<ISOMP>,VALIDATEMODE=<VALIDAT
EMODE>;
INPUT PARAMETERS
Table 2-721 shows the input parameters of VALIDATE VERSION.
Output Parameters
Table 2-722 shows the output parameters of VALIDATE VERSION.
2-414
Example
VALIDATE VERSION:MEID=85,ISOMP=YES,VALIDATEMODE=COMMON;
Function
Command
VALID CHECK:MEID=<MEID>,PHYSADDRESS=<PHYSADDRESS>;
INPUT PARAMETERS
Table 2-723 shows the input parameters of VALID CHECK.
Output Parameters
Table 2-724 shows the output parameters of VALID CHECK.
Table 2-724 VALID CHECK OUTPUT PARAMETERS
2-415
Example
VALID CHECK:MEID=85,PHYSADDRESS="1/1/1/1";
Function
Command
VERSION IDECHECK:MEID=<MEID>,ISOMP=<ISOMP>;
INPUT PARAMETERS
Table 2-725 shows the input parameters of VERSION IDECHECK.
Output Parameters
Table 2-726 shows the output parameters of VERSION IDECHECK.
Example
VERSION IDECHECK:MEID=85,ISOMP=YES;
2-416
Function
Command
VERSION MSSYNC:MEID=<MEID>,ISOMP=<ISOMP>;
INPUT PARAMETERS
Table 2-727 shows the input parameters of VERSION MSSYNC.
Output Parameters
Table 2-728 shows the output parameters of VERSION MSSYNC.
Example
VERSION MSSYNC:MEID=85,ISOMP=YES;
2-417
2-418
3-1
3-2
I
ZXUR 9000 UMTS MML Command Reference
II
Tables
III
ZXUR 9000 UMTS MML Command Reference
IV
Tables
V
ZXUR 9000 UMTS MML Command Reference
VI
Tables
VII
ZXUR 9000 UMTS MML Command Reference
VIII
Tables
IX
ZXUR 9000 UMTS MML Command Reference
X
Tables
XI
ZXUR 9000 UMTS MML Command Reference
XII
Tables
XIII
ZXUR 9000 UMTS MML Command Reference
XIV
Tables
XV
ZXUR 9000 UMTS MML Command Reference
XVI
Tables
XVII
ZXUR 9000 UMTS MML Command Reference
XVIII
Tables
XIX
ZXUR 9000 UMTS MML Command Reference
XX
Tables
XXI
Tables
XXIII