Professional Documents
Culture Documents
CJ409零件手册
CJ409零件手册
CJ409零件手册
333 en
SANDVIK CJ409:01
This document is valid for:
SANDVIK CJ409:01
Sandvik
Stationsplan, SE-233 81 Svedala, Sweden
Tel: +46 (0)40 409000, Fax: +46 (0)40 409260
www.sandvik.com
SPC Sandvik CJ409:01
General
Ordering information
When ordering parts, always state the machine type and serial number
according to the identification plate on the jaw crusher. State quantity, article
number and denomination for each ordered part.
Identification plate
The figure below shows an example of the crusher’s identification plate. The
identification plate contains data needed when contacting Sandvik SRP AB
concerning wear parts.
Please enter the serial number of the associated machine in the intended field
on the first page of this wear part catalog (the copyright page).
1 2 3 4
Identification plate:
1 Machine type
2 Part number
3 Serial number
4 Order number
Think ahead!
Avoid unnecessary downtime and increased freight charges by ordering parts
well in advance.
Overview
4.
1.
2.
3a. 3b. 5.
7101-0,
7101-2
7200-0
7100-0
7201-0, 7201-2, 7201-3
7010-1
7010-2
7004-0
7003-0
2. Toggle plate
5007-0,
5008-0,
5009-0
5018-0
5013-0
5014-0, 5014-2
5003-0
5004-0
5005-0 5006-0
Cat. no. Pos. no. Qty. Part number Alternative Description Remarks
53-267-107-500 Swing jaw assembly Including bearing housing but
excluding flywheels
2013-0 10-214-474-500 Jaw
2009-0,
2211-0
2201-4 2010-0 2009-2 2006-1 2006-0
2211-2 2209-1 2208-0
2210-0 2209-4
2207-0
2201-0 2011-0 2010-1 2008-0 2200-0
4. Flywheels
2205-0 2206-0
2212-0 2213-0,
2213-2,
2213-5
Stand alone installation
Cat. no. Qty. Part number Alternative Description Remarks
2205-0 1 400.0263-001 D=1605 Flywheel flat
2206-0 1 400.0263-002 D=1605 Flywheel 7×5V
400.0263-003 D=1605 Flywheel 6×SPC
2212-0 1 53-366-391-001 T=10 Counterweight
2212-0 1 53-366-391-002 T=15 Counterweight
2213-0 2 840.0078-00 Screw M6S 20×60
2213-2 2 847.0182-00 Washer DIN 137 B 21×36
2213-5 2 847.0132-00 Washer BRB 21×36
5. Bearing housing
2000-1 2000-0
2200-0
2004-0,
2004-2
2004-7
(Continued)
6. Driving arrangement
7. Frame
8. Tool list
Pos no. Qty. Part number Description Remarks
400.0486-901 Tool box kit
1 1 442.9476-00 Tool Box
2 1 402.4452-00 Gauge for CSS
3 1 402.4480-00 Lifting Tool
4 1 920.0110-00 Slugging Wrench 65
5 1 920.0201-00 Socket Wrench 65 L=135
6 2 920.0090-00 Open-ended Spanner 55
7 1 920.0262-00 Slugging Wrench 50
8 1 920.0263-00 Combination Wrench 50
9 1 400.0585-001 Tool List
9. Sign assembly
230
460
6
9
7
1
2 3
5 4
2
1 3
9