Vertical Circular Motion

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Sub Topic Name : Vertical circular motion

Subject Name : PHYSICS

Wrong
Test Name Test Date Total Questions Left Questions
questions

QUIZ TEST - 05 -
08-10-2023 6 2 2
P2

1.Ques Type(Fill in the blanks) RIGHT MARKS :2.00 WRONG MARKS :0.00 Wrong

(English)

A mass 0.5 kg is placed near the spring of spring coefficient 1000 N/m as shown.
Now spring is compressed by some distance and released from rest. (R = 10 cm,

Spring is not connected with mass m.)

Find the minimum compression in spring (in cm) so that block completes vertical
circular motion.

2.Ques Type(Fill in the blanks) RIGHT MARKS :2.00 WRONG MARKS :0.00 Wrong

(English)

A mass 0.5 kg is placed near the spring of spring coefficient 1000 N/m as shown.
Now spring is compressed by some distance and released from rest. (R = 10 cm,

Spring is not connected with mass m.)

If spring is compressed by minimum compression then the normal (in N) force


acting on block at A is 3x. Find x.

3.Ques Type(Fill in the blanks) RIGHT MARKS :2.00 WRONG MARKS :0.00 Left

(English)
A tube of mass M hangs from a thread and two balls of mass m slide inside it
without friction (see figure). The balls are released simultaneously from the top of
the ring and slide down on opposite sides. θ defines the positions of balls at any

time as shown in figure.

Minimum value of m so that ring will start to rise is kM, find value of k.

4.Ques Type(Fill in the blanks) RIGHT MARKS :2.00 WRONG MARKS :0.00 Left

(English)

A tube of mass M hangs from a thread and two balls of mass m slide inside it
without friction (see figure). The balls are released simultaneously from the top of
the ring and slide down on opposite sides. θ defines the positions of balls at any

time as shown in figure.

If M = 0, then the value of angle is θ at which the tube begins to rise. Find cosθ.

ANSWER

1. 5.00 2. 5.00 3. 1.50 4. 0.66 - 0.67

You might also like