Professional Documents
Culture Documents
Telha Shingle
Telha Shingle
BITUMINOUS TILE
CE MARKING
Impermeable final covering layer CE approved in accordance with
ETA. Resistant to weathering and isolates the sound of rainfall.
PERMANENT UV STABILITY
Unlimited resistance to UV rays thanks to the basalt grain.
SELF-SEALING
Easy to install thanks to the thermo-adhesive pre-installed points
which guarantee sealing during installation.
B L A / co. A/b
CODES co. co. / b CE
[mm] [mm] [m2] [m2]
SHIREDR RED R 777 336 2,0 1 66,0 33
SHIBROR BRO R 777 336 2,0 1 66,0 33
SHIGRER GRE R 777 336 2,0 1 66,0 33
SHIBLAR BLA R 777 336 2,0 1 66,0 33
SHIREDB RED B 808 336 2,0 1 66,0 33
SHIBROB BRO B 808 336 2,0 1 66,0 33
SHIGREB GRE B 808 336 2,0 1 66,0 33
SHIBLAB BLA B 808 336 2,0 1 66,0 33
TRANSPORT
Easy to transport thanks to the reduced
package dimensions (80 x 34 cm) and the re-
duced weight (approx. 20 kg).
BYTUM 400
Ideal in combination with a bituminous
underlay control layer (BYT400) for a
effective coverage even on
sloping roofs
COMPOSITION
Top layer: Coloured basalt grain for ceramisation and thermo-
adhesive points
Compound: oxidised bitumen
Reinforced: glass fibre coated with bitumen
Compound: oxidised bitumen
Bottom layer: fine minerals
TECHNICAL DATA
Property Standard Value Value
Type RECTANGULAR BIBER
Mass per unit area ETA 07/0266 9,6 kg/m 2
9 kg/m2
Thickness - 3 mm 3 mm
Maximum tensile force MD/CD (1)
EN 544 750 / 550 N/50 mm 750 / 550 N/50 mm
MD/CD breaking elongation (1) EN 544 ≥3,5 / ≥3,5 % ≥3,5 / ≥3,5 %
Resistance to tearing (1)
EN 544 120 N 100 N
Watertightness (bitumen mass) ETA 07/0266 896 g/m2 896 g/m2
UV stability - permanent permanent
Temperature resistance ETA 07/0266 -20 / +80 °C -20 / +80 °C
Reaction to fire EN 13501-5 class E class E
External fire resistance EN 13501-5 Broof T1 Broof T1
Tensile force MD/CD after artificial ageing EN 544 600 / 400 N/50mm 600 / 400 N/50mm
Resistance to nail tearing MD/CD after artificial ageing EN 544 100 N 100 N
Hot sliding after artificial ageing EN 544 ≤ 2 mm ≤ 2 mm
Grain adhesion after artificial ageing EN 544 ≤ 2,5 g ≤ 2,5 g
Flexibility at low temperatures EN 544 -20 °C -20 °C
Bitumen density ETA 07/0266 1,2 kg/l 1,2 kg/l
Application temperature ETA 07/0266 0 / 40 °C 0 / 40 °C
Water absorbancy EN 544 <2% <2%
GEOMETRY
336 mm 336 mm
808 mm 777 mm
RELATED PRODUCTS
BYTUM400 SHINGLE STICK (2)
CODES g/m2 tape H x L [m] A [m2] pcs. pcs/b CE H CODES ml pcs. CE
BYT400 400 - 1,0 x 50 50 1 20 00057008 310 1
L
NOTES: (1)
Average values achieved during laboratory tests. For average values, please see the declaration of performance.
(2)
1 cartridge covers approximately 3 straight metres for fastening sheet metal.
25
mm
10
mm
25
mm
01 02
03 04
x2
25
10 mm
mm
50
mm
25
mm
01 02
03 04
NOTES: For more information on the correct installation of the BYTUM 400 bituminous underlay please refer to the catalogue “MEMBRANES AND TAPES FOR
WOODEN BUILDINGS”.
(1)
Nail proportion: Approx. 40 nails per m2.
(2)
Nail proportion: Approx. 60 nails per m2.
25
mm
10
mm
25
x4 mm
01 02
03 04
25
10 mm
mm
x6 25
mm
01 02
03 04
NOTES: For more information on the correct installation of the BYTUM 400 bituminous underlay please refer to the catalogue “MEMBRANES AND TAPES FOR
WOODEN BUILDINGS”.
(1)
Nail proportion: Approx. 40 nails per m2.
(2)
Nail proportion: Approx. 60 nails per m2.