Professional Documents
Culture Documents
Refrigeration Sheets
Refrigeration Sheets
Refrigeration Sheets
Responsible solutions.
Refrigeration
Systems
to single-unit installations.
AdaptaPak™
Refrigeration
Distributed Systems
Systems
AIR AIR
EXHAUST
EXHAUST
CONTROL
CONTROL
PANEL
PANEL
AIR INTAKE
AIR INTAKE
AIR INTAKE
AIR INTAKE
3 3
51 4 "51 4 "
1 1 1 1
50 2 "50 2 " 50 2 "50 2 "
1 1
54 4 "54 4 "
COMPRESSOR
COMPRESSOR
ACCESS
ACCESS
DOOR
DOOR
COMPRESSOR
COMPRESSOR
ACCESS
ACCESS
DOOR
DOOR
Efficiency and Performance in Design installations, on the other hand, ramp capacity up or Standard Configuration Available Options
AdaptaPak was designed specifically to improve
™ down to more closely match refrigeration loads. This • Pre-painted galvanized steel cabinet. • Alternative controls packages.
the performance of refrigeration applications in can provide significant energy savings — 20% or more • Emerson scroll compressors. • Variable-speed EC motors.
drug stores, convenience stores and other smaller- compared to a single condensing unit. In addition, • Centrifugal style discharge oil separator with • Electrofin coated coil.
footprint retail establishments. Without AdaptaPak, AdaptaPak integrates all of the high-pressure side integral oil-receiver. • Cold weather package (split condenser/heated
multiple outdoor single-unit installations provide the components into one easy-to-install package. • Replaceable core filter/drier and sight glass. and insulated receiver).
necessary refrigeration capacity by cycling on and • Oversized receiver. • Hail guard.
Additionally, a variety of design benefits adds up to
off. In contrast, an AdaptaPak system uses multiple • Through-the-door disconnect. • Heat reclaim valve package (remote only).
significant savings — Adaptapak features a new,
staged compressors (including a digital scroll) to • IEC contactors. • Analog liquid level indicator.
aesthetically-pleasing cabinet design (reduces visibility),
more effectively and efficiently respond to the store’s • Phase loss monitor with brownout protection. • Low pressure control per compressor.
and depending on configuration, even has a faster
refrigeration demands. As a result, compressor • MultiMax system controller. • 460V main power.
delivery time. Electrical and refrigeration connections
capacities can be varied to better match required loads • Two suction groups or single suction sroup
can be on the same side making it easier to install in (model dependent).
and reduce cycling — a much more efficient and
areas with minimal clearances and limited space. The
economical design. Additionally, Adaptapak is designed • One digital scroll per suction group (if available).
Isolated Compressor Section can be easily accessed
with a highly efficient coil and is available with energy • R-407A, R-448A and R-449A refrigerants.
while unit is operational without interrupting airflow.
efficient EC motors to further increase efficiency. • Suction filter per suction group.
Finally, the unit’s single roof curb and roof penetration
• Low pressure control per suction group.
Economy Is Simply Part of the Design adds up to even more savings. Optional heat reclaim
• High pressure control per compressor.
Multiple, single units with compressors that switch valves can be used as part of a heat reclaim system to
• Fixed-speed AC motors.
on and off while running at maximum output waste increase energy efficiency by reclaiming waste heat from
• Digital liquid level alarm (on receiver).
energy and may reduce component life. AdaptaPak the condenser for either hot water or sales floor heating.
• 208-230V/1ph/60Hz power and control wiring.
AdaptaPak™ Models and
Distributed Systems Components
Connections
Number Receiver Unit LT Suction MT Suction LT Liquid MT Liquid Power
Model Coils Compressors MCA MOPD
of Fans Capacity (Lbs) Weight Connection Connection Connection Connection Supply
ADP-M0048-L0000* 2 1 2 140-150 2600 1 5/8 1 1/8 208.0 47.3 60.0
Medium Temp Units
ADP-M0152-L0032 2 2 4 140-150 2950 1 5/8 2 1/8 7/8 1 1/8 208.0 142.7 175.0
ADP-M0048-L0052 2 2 4 140-150 2800 1 5/8 1 5/8 7/8 1 1/8 208.0 106.4 125.0
ADP-M0079-L0052 2 2 4 140-150 2800 1 5/8 1 5/8 7/8 1 1/8 208.0 120.0 150.0
ADP-M0106-L0052 2 2 4 140-150 2800 1 5/8 1 5/8 7/8 1 1/8 208.0 139.8 175.0
ADP-M0048-L0076 2 2 5 140-150 2950 2 1/8 1 5/8 7/8 1 1/8 208.0 130.3 150.0
ADP-M0079-L0076 2 2 5 140-150 2950 2 1/8 1 5/8 7/8 1 1/8 208.0 143.9 175.0
ADP-M0106-L0076 2 2 5 140-150 2950 2 1/8 1 5/8 7/8 1 1/8 208.0 163.7 175.0
ADP-M0178-L0032 3 2 5 140-150 3400 1 5/8 2 1/8 7/8 1 1/8 208.0 175.6 200.0
ADP-M0152-L0052 3 2 5 140-150 3400 1 5/8 2 1/8 7/8 1 1/8 208.0 169.2 200.0
ADP-M0178-L0052 3 2 5 140-150 3400 1 5/8 2 1/8 7/8 1 1/8 208.0 195.2 225.0
ADP-M0152-L0076 3 2 6 140-150 3500 2 1/8 2 1/8 7/8 1 1/8 208.0 193.1 225.0
ADP-M0178-L0076 3 2 6 140-150 3500 2 1/8 2 1/8 7/8 1 1/8 208.0 219.1 250.0
* Not availble with split condenser due to single coil design--available with heated and insulated receiver for low ambient applications.
^ Uses fixed speed scroll in leiu of digital scroll on low temp due to compressor availability
Conyers, GA USA
770.285.3057
hillphoenix.com
©2017 Hillphoenix, Inc.
SP-ADPACv07171k