Professional Documents
Culture Documents
HallScrew Packs Brochure Singles - 3.1 - 0723
HallScrew Packs Brochure Singles - 3.1 - 0723
HallScrew Packs Brochure Singles - 3.1 - 0723
ORC / Refrigeration and Gas Compression System PROCESS SYSTEMS Global Excellence
HALLSCREW
COMPRESSOR
PACKS
HallScrew Packs
COMPRESSOR PACK RANGE
HallScrew standard
compressor packs
J & E Hall supply the HallScrew compressor as a complete package with
oil management system and controller for installing into a refrigeration,
air conditioning or heat pump system.
HallScrew
Compressor Pack
HORIZONTAL
2
(SHANGHAI) TECHNOLOGY CO.,LTD.
ORC / Refrigeration and Gas Compression System PROCESS SYSTEMS Global Excellence
Displacement
m2/h at 50Hz
2500
2000
1500
1000
500
0
HSP
3216 3218 3220 3221 4221 4222 4223 4224 4225 4226 4227 5228 5230 6231 6233 2024 2028 2031 2035 Model
Applications
HallScrew compressor packs offer wide ranging cooling capacities for the most varied applications. Customers have the
confidence in our compressor pack technology from deep freezing to standard refrigeration. Our packs are installed
world-wide and used in a wide range of industries.
Standard Pack
HallScrew single screw compressor Oil management system (includes steel pipe work, oil filter, oil drain
IP55 2 pole electric drive motor with non return valve)
Electronic controller High pressure safety cut out (electro-mechanical)
Suction strainer and non return valve Oil pump as required
Oil separator Capacity control solenoid valves
Oil cooler or liquid injection kit
Oil heater
3
(SHANGHAI) TECHNOLOGY CO.,LTD.
ORC / Refrigeration and Gas Compression System PROCESS SYSTEMS Global Excellence
Specifications PLEASE NOTE: ALL WEIGHTS AND DIMENSIONS ARE FOR GUIDANCE ONLY AND WILL BE CONFIRMED UPON QUOTATION
HallScrew Displacement Maximum overall dimensions (mm) Noise level Suction Ø (mm) Discharge Ø (mm) Approx. dry weight Approx. oil
Pack m3/h @ Length Width Height dB(A)* X Y with motor (kg) charge (litres)
NOTE 1: Performance data tables: External oil cooling, discharge gauge 35°C, liquid subcooling 5°C, suction superheat 5°C Economised
Suction and discharge gauge conditions refer to inlet and outlet flange of the compressor.
Allowance for pressure drop upstream and downstream of the compressor must be made. * Contact your local representative for details
100%
10%
energy savings
Up to 10% energy savings
compared to traditional
slide valves
Inverter Technology
Full Loaded Power %
Power inverter
Power slide valve
Power ideal system
25%
All data printed is believed to be correct at the time of issue and is for guidance only. We accept no liability for any incorrect information supplied. For further technical specification please contact J & E Hall Limited.