Professional Documents
Culture Documents
Estandares Diseño 02
Estandares Diseño 02
Nominal Actual
Press Fit Hole Slip Fit Hole
Dowel Dowel Resultant Press Resultant Slip
Diameter Diameter
Diameter Diameter Fit Fit
H6 F7
(mm) (m6 tolerance)
+0.008 +0.006 +0.016 -0.008 -0.002
+0.002 0 +0.006 +0.004 +0.014
1
Ø1 Ø1 Ø1
file:///C:/Users/Arturo/Documents/D&ATechnologies/06_Mech%20Design/TKT-KR%20Standards/chap03/3.1.1_Precision_Gro... 19-Jul-14
3.1.1. Precision Ground & Hardened Dowel Pins Página 2 de 3
file:///C:/Users/Arturo/Documents/D&ATechnologies/06_Mech%20Design/TKT-KR%20Standards/chap03/3.1.1_Precision_Gro... 19-Jul-14
3.1.1. Precision Ground & Hardened Dowel Pins Página 3 de 3
Using a dowel in a detail that has been hardened, and cannot be left soft the hole must utilize a slip-fit tolerance. It is not possible for the
3.1.1.2.2.machine builder to hand ream a hole in a hardened detail.
Using a dowel to locate a detail that is regularly replaced (clamp blocks, locator pins, Rest pads, etc...), the hole in the replaceable detail
3.1.1.2.3.must utilize a slip-fit tolerance. The hole in the fixed detail is to utilize a press-fit tolerance.
3.1.1.2.4. Preference is for both mating parts to utilize a thru hole. Drill (c'bore) to remove material on deep holes.
back to top
file:///C:/Users/Arturo/Documents/D&ATechnologies/06_Mech%20Design/TKT-KR%20Standards/chap03/3.1.1_Precision_Gro... 19-Jul-14