Professional Documents
Culture Documents
Activate GSMto LTECell Reselection Featureon BSCNodes
Activate GSMto LTECell Reselection Featureon BSCNodes
Activate GSMto LTECell Reselection Featureon BSCNodes
2013-12-18 PA1
1 INTRODUCTION................................................................................1
1.1 Scope..................................................................................................1
1.2 Target Group.......................................................................................1
2 Information..........................................................................................2
2.1 Description..........................................................................................2
2.2 Dependencies.....................................................................................2
3 Implementation...................................................................................2
4 DT example.........................................................................................6
.................................................................................................6
5 Fallback Procedure.............................................................................6
6 Important Information..........................................................................6
1 INTRODUCTION
1.1 Scope
2013-12-18 PA1
2 Information
2.1 Description
The Feature, FAJ 123 155 GSM-LTE Cell Reselection, was introduced
in order to allow a GSM/LTE capable terminal in GSM, to perform cell
reselection to LTE in both idle and packet transfer mode. Support for
defining LTE neighbors is added to the BSS in order for the terminal to
measure and select neighboring LTE cells.The main benefits by the
introduction of this feature are described below:
Priority between GSM, WCDMA and LTE is configurable per cell which
2.2 Dependencies
3 Implementation
The Feature GSM to LTE Cell Reselection is activated by the following
the procedure described below:
DBTSP:TAB=AXEPARS,SETNAME= CME20BSCF,NAME=CRESLTE;
Ericsson Internal
OPERATION DESCRIPT. 3 (7)
Prepared (Subject resp) No.
2013-12-18 PA1
Before the activation of the feature the value must be zero (0).
SYPAC:ACCESS=ENABLED,PSW=PSW2PAR;
DBTRI;
DBTSC:TAB=AXEPARS,SETNAME=CME20BSCF,NAME=CRESLTE, VALUE=1;
DBTRE:COM;
SYPAC:ACCESS=DISABLED;
RLEFC:CELL=cell,ADD,EARFCN=1899;
Where CELL is the indicated 2G Cell and EARFCN is the chosen LTE
Frequency.
RLEFP:CELL=cell;
RLSRC: Radio Control Cell, System Information RAT Priority Data, Change
This new command have three formats, one each for GSM, WCDMA and
LTE. The purpose with the commands are to configure different priorities
between GSM, WCDMA and LTE in the cells.
2013-12-18 PA1
Set the Radio Access Technology Priority using the command the command
below for GSM (0 = lowest priority)
RLSRP:CELL= cell_name;
For Instance:
RLSRI:CELL=cell;
RLSRC: Radio Control Cell, System Information RAT Priority Data, Change
This new command have three formats, one each for GSM, WCDMA and
LTE. The purpose with the commands are to configure different priorities
between GSM, WCDMA and LTE in the cells.
For Instance and by using format 3 in ALEX Library for G12A.
RLSRC:CELL=G0009E1,PRIOTHR=15;
Where:
Ericsson Internal
OPERATION DESCRIPT. 5 (7)
Prepared (Subject resp) No.
2013-12-18 PA1
For Instance:
RLSRP:CELL=cell;
SYBUP:FILE;
Ericsson Internal
OPERATION DESCRIPT. 6 (7)
Prepared (Subject resp) No.
2013-12-18 PA1
4 DT example
5 Fallback Procedure
The Fallback Procedure comprises of disabling the feature by running
the following commands on the BSC via the Winfiol Application:
SYPAC:ACCESS=ENABLED,PSW=PSW2PAR;
DBTRI;
DBTSC:TAB=AXEPARS,SETNAME=CME20BSCF,NAME=CRESLTE,
VALUE=0;
DBTRE:COM;
SYPAC:ACCESS=DISABLED;
DBTSP:TAB=AXEPARS,SETNAME=CME20BSCF,NAME=CRESLTE;
The value must be equal to zero that means the feature is deactivated.
RLSRE:CELL=cell_name;
6 Important Information
It has to be mentioned that the procedure above has been written for
testing purposes and only. If you want to apply this procedure in a Live
Network then a feedback from the Optimization Department is required.
Ericsson Internal
OPERATION DESCRIPT. 7 (7)
Prepared (Subject resp) No.
2013-12-18 PA1