Professional Documents
Culture Documents
RocPlane Tutorial 2 - Support
RocPlane Tutorial 2 - Support
RocPlane Tutorial 2 - Support
Bolt Properties
Adding Bolts
Probabilistic Analysis
Pressure Option
Finished Product:
The finished product of this tutorial can be found in the Tutorial 4 Support.pln4 file, located in the Examples
> Tutorials folder in your RocPlane installation folder.
If you have not already done so, run the RocPlane program by double-clicking the RocPlane icon in your
installation folder or by selecting Programs > Rocscience > RocPlane > RocPlane in the
Windows Start menu.
When the program starts, a default model is automatically created. If you do NOT see a model on your
screen:
Whenever a new file is created, the default input data forms a valid wedge, as shown in the image below.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 1/11
4/30/2020 Tutorial 04 - Support in RocPlane
If the RocPlane application window is not already maximized, maximize it now so that the full screen is
available for viewing the model.
Although RocPlane displays the model in a three dimensional format, the RocPlane analysis is
strictly a two-dimensional analysis. The 3D display is solely for the purpose of improved visualization
of the problem geometry.
All input data assumes that the problem is uniform in the direction perpendicular to the wedge cross-
section. The analysis is performed on a “slice” through the cross-section of unit width.
All analysis results (e.g., Wedge Weight, Wedge Volume, Normal Force, Resisting Force, Driving
Force, etc.) and input data are therefore stated in terms of force per unit length, volume per unit
length, etc.
2.0 Model
The Project Settings dialog allows you to configure the main analysis settings for your model. To open the
dialog, select Project Settings on the toolbar or on the Analysis menu.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 2/11
4/30/2020 Tutorial 04 - Support in RocPlane
2. Select the Project Summary tab and enter RocPlane Support Tutorial as the Project Title.
The Bolt Properties dialog allows you set up one or more Bolt Properties for use in your model. To open
the dialog, select Bolt Properties on the toolbar of the Support menu.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 3/11
4/30/2020 Tutorial 04 - Support in RocPlane
2. Set Type = Simple Bolt Force, Bolt Model = Active, and Force = 20.39.
3. Click OK.
Bolts are added individually to a wedge model using the Add Spot Bolt dialog. To open the dialog, select
Add Bolt on the toolbar of the Support menu.
1. Position the cursor on the slope face of the wedge on any of the four 3D Wedge View panels.
The cursor changes from an "arrow/rockbolt" icon to where the "rockbolt" and "arrow" lines
up.
2. Click the left mouse button at a point on the wedge where you want the bolt installed.
The Add Spot Bolt dialog appears, allowing you to modify the geometry and select a bolt property for
the bolt.
6. Click OK.
NOTE: The bolt is automatically “snapped” to the center of the 3D wedge model, regardless of the lateral location at
which you clicked the mouse. Remember that the RocPlane analysis is 2D and that the 3D Wedge View is for display
purposes only. The lateral location of a bolt on the slope has no effect on the analysis, so all bolts are displayed at the
“center” of the 3D wedge model.
TIP: Note that the colour of the bolt on the model matches the colour selected for the Bolt Property in the Bolt
Properties dialog.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 4/11
4/30/2020 Tutorial 04 - Support in RocPlane
Since RocPlane is a 2D software, the bolt capacity entered in the Bolt Properties dialog (Force) is
considered as a force per unit distance (tonnes per meter in this example). The capacity takes account of
the spacing of the bolts in the out-of-plane direction. For example, if the capacity of an individual bolt were
50 tonnes and the out-of-plane bolt spacing were 2 meters, you would enter a Force of 50 / 2 = 25 tonnes /
meter. Each bolt in RocPlane therefore actually represents a ROW of equally spaced bolts.
Since the default wedge model in RocPlane is a very large wedge (60-meter-high slope), and the default
Force in the Bolt Properties dialog is about 20 tonnes / meter, the effect of the added single bolt on the
Factor of Safety is very small (changed from 1.0 to 1.01 after adding the bolt). To see a greater change,
let's increase the bolt Force to 200 tonnes / meter.
4. Click OK.
NOTE: For detailed information on bolt properties and how bolts are implemented in RocPlane, see Bolt Properties
Dialog in RocPlane and How Bolts are Implemented in RocPlane.
5. Repeat the above steps for each bolt you want to delete.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 5/11
4/30/2020 Tutorial 04 - Support in RocPlane
While in Delete Bolt mode, enter the asterisk (*) character on the keyboard.
ALL bolts will be deleted from the model.
5. Edit the bolt the same way you did when you added it.
For details, see Adding Bolts in RocPlane and Add Spot Bolt Dialog in RocPlane.
TIP: To cancel all changes, even if you've clicked the Apply button, click Cancel.
NOTES:
Bolts can only be edited one at a time. It's not possible to edit the properties of multiple bolts
simultaneously.
You can view a list of all currently installed bolts in the Info Viewer and the 2D Wedge View.
A listing of all bolts and their properties can be found in the Bolt Force section of the Wedge Information
Panel in the Sidebar at the right of the screen.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 6/11
4/30/2020 Tutorial 04 - Support in RocPlane
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 7/11
4/30/2020 Tutorial 04 - Support in RocPlane
It's useful to know that, if you move the wedge out of the slope after adding bolts, the bolts stay "in" the
slope and are completely visible. This allows you to examine the bolt installation in more detail.
Click and drag the wedge with the left mouse button.
You can control the appearance of bolts on your model by using the Display Options dialog. For example,
you can turn off display of the ends of the slope drawn on the model (Draw Slope Ends) to make it easier
to view the bolts, particularly in the Side View.
To open the dialog, select Display Options on the toolbar or the View menu.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 8/11
4/30/2020 Tutorial 04 - Support in RocPlane
2. Click Apply.
You can also customize the colour of selected bolts (Colors Selection) when using the Delete Bolt and
Edit Bolt options.
The above discussion of bolts in RocPlane assumes a Deterministic analysis of a single wedge. If the
Analysis Type in Project Settings is Probabilistic:
The Probabilistic Analysis will be run each time a bolt is added or edited (i.e., when OK is clicked in
the Bolt Properties dialog).
Selecting Apply in the Bolt Properties dialog will calculate a new Factor of Safety for the Mean
Wedge, but will re-run the Probabilistic Analysis.
If you are deleting bolts, the Factor of Safety for the Mean Wedge is re-calculated as each bolt is
deleted, but the Probabilistic Analysis is re-run only when you exit the Delete Bolt option.
NOTE: Bolts should be used with some caution in a Probabilistic analysis. Since the bolts are added while viewing the
Mean Wedge, the orientations of bolts added on the Mean Wedge may no longer be optimal in terms of support, to other
wedges generated by the Probabilistic analysis.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 9/11
4/30/2020 Tutorial 04 - Support in RocPlane
The Pressure option is another method of modeling either support or loading in RocPlane.
Let’s demonstrate this with the following example, which shows the equivalence of Bolt or Pressure
support.
1. Delete any bolts that may still be applied to the wedge model.
3. In the Pressure dialog, select the Slope Face check box. This applies the pressure to the slope face
only.
We want to enter a pressure that is equivalent to the bolt capacity entered in Section 1.4 above. In
the Sidebar Wedge Information Panel, under the Geometry heading, notice the Slope Length
value = 78.2 meters. This is the length of the wedge face from toe to crest. We divide the bolt
capacity by the slope length to obtain the required pressure on the slope face:
6. Click Apply.
We get a Factor of Safety of 1.1071 that's very close to 1.1069 with a single bolt of 200 tonnes/m.
This demonstrates the equivalence of Bolt or Pressure support in RocPlane. You can utilize whichever
method is most convenient for modeling support and performing parametric analysis using different bolt
capacities, pressures or required safety factors.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 10/11
4/30/2020 Tutorial 04 - Support in RocPlane
For example, you could use the Pressure option to determine a required pressure to achieve a given
Factor of Safety, and then use the value of Pressure to determine required bolt capacity and / or bolt
spacing.
This concludes the tutorial. You are now ready for the next tutorial, Tutorial 05 - Slope Design with
Eurocode 7.
https://www.rocscience.com/help/rocplane/#t=rocplane%2Ftutorials%2F04_Support_Tutorial.htm 11/11