The document describes several refrigeration and HVAC equipment including:
1) A fan coil unit with 2-way and 3-way water valves, copper cooling coil, and blower motor.
2) A fin comb for straightening condenser and cooling coil fins.
3) A flaring tool set for copper tubes between 3/16" to 5/8" OD.
4) An evacuating and refrigerant charging station for pulling a vacuum and charging hydrocarbons.
The document describes several refrigeration and HVAC equipment including:
1) A fan coil unit with 2-way and 3-way water valves, copper cooling coil, and blower motor.
2) A fin comb for straightening condenser and cooling coil fins.
3) A flaring tool set for copper tubes between 3/16" to 5/8" OD.
4) An evacuating and refrigerant charging station for pulling a vacuum and charging hydrocarbons.
The document describes several refrigeration and HVAC equipment including:
1) A fan coil unit with 2-way and 3-way water valves, copper cooling coil, and blower motor.
2) A fin comb for straightening condenser and cooling coil fins.
3) A flaring tool set for copper tubes between 3/16" to 5/8" OD.
4) An evacuating and refrigerant charging station for pulling a vacuum and charging hydrocarbons.
The document describes several refrigeration and HVAC equipment including:
1) A fan coil unit with 2-way and 3-way water valves, copper cooling coil, and blower motor.
2) A fin comb for straightening condenser and cooling coil fins.
3) A flaring tool set for copper tubes between 3/16" to 5/8" OD.
4) An evacuating and refrigerant charging station for pulling a vacuum and charging hydrocarbons.
Cooling coil made of copper tube, Cooling coil size 30"X08" two row with air filter and suitable single phase blower motor. Make- Micro Mech Instruments Model: MMI RAC RC 013
114. FIN STRAIGHTENED/FIN COMBS WITH
PLASTIC BASED COMBING
Fin straightened/fin comb. For straightened the fins of
condenser and cooling coil 8,9,10,12,14,15 spacing per inch& stainless steel fins straightened.
52. FLARING TOOL SET, SINGLE TYPE FOR
TUBE. 3/16’’ TO 5/8’’ O.D.:-
Flaring tool set, single type for tube. 3/16’’ to 5/8’’O.D.
Block and cone made of alloy steel &hard tempered nickel chrome plated Able to flaring 3/16”, ¼”, 3/8” 5/16”, 7/16”, ½”, 5/8” inches O.D. copper Tube
Make- Micro Mech Instrume
141. EVACUATING AND REFRIGERANT CHARGING STATION:--
Evacuating and refrigerant charging station, consist of
a)Rotary two stage vacuum pump and motor (with gas
ballast and anti-suck back motor capacity 1/4 hp)
b)b) Manifold with gauges and valves and capable of pulling
vacuum up to 50 microns of Hg and Provision of connecting a microns level vacuum gauge.
c) Weighing scale digital type cap. 5 kg. Accuracy of ± 1 gm.
for charging hydrocarbons. Unit supplied with 3 charging lines 1 meter each and instruction manual.
Make- Micro mech Instruments
Model: MMI MRAC RC 039
147. RECOVERY UNIT FOR CFC:-
Recovery unit with cylinders CFC compressor and air
cooled condenser with cylinders complete with gauges, pressure and compound glycerin filled ,liquid indicator , dryer, HP & LP Cut-outs, on-off switch, MCB, valves (inlet & outlet), empty gas cylinder 2Kg capacity,. flexible gas charging line-2 nos. (one meter long ) with instruction manual.
Make- Micro Mech instruments
Model: MMI MRAC RC 012 162. ICE CANDY PLANT 2 TON WITH CAPACITY TO MAKE 64 ICE CANDY AT A TIME WITH FORMA TRAY, STAINLESS STEEL TANK ON TROLLEY.:- Ice candy plant, 2 ton (6000 K Cal./Hr.) with stainless steel tank, mould box, thermo Cole/puff insulated/glass wool , stainless steel body, Agitator with motor, Reciprocating compressor Hermetic .Temperature control digital type , LP-HP pressure control, refrigerant control , compound and pressure gauge Digital, amp. meter and volt meter digital , capacity to make 64 ice candy at a time with Make- Micro Mech instruments Forma tray, complete system fitted on Model: MMI MRAC RC 009 heavy duty iron frame with powder coated beautiful painted and controls fitted on G.I sheet board panel. Complete charged with refrigerant. System fitted On heavy duty Trolley. System consists 1.Hermetic reciprocating compressor brand new tested and certified by principal Manufacturer along with Serial .Number. and guaranty card, capacity 2Ton 2.Air cooled condenser 2 ton capacity with heavy duty fan, condenser made of copper tube and aluminum fins with housing . 3.Brine cooling coil inner tank made of stainless steel ,brine tank covered with SS sheet metal work, and drainage of brine with valve facilities, agitator motor tank made of food grade SS & cooling coil made of copper tube capacity 2 ton, forma tray minimum of 64 candy making made of food grade stainless steel , different shape with proper fixing system in brine tank.
4.Expansion device- an arrangement of a
thermostatic expansion valve with hand shut off valve . 5. HP and LP cut out switch each 1 6. Liquid line indicator-1 7. Receiver with inlet and outlet valve-1 8. Solenoid valve-1 9. Solid core filter drier-1 10. Suction accumulator-1 11. Pressure gauge -1 12. Compound gauge -1 13. Thermostat digital type-1 14. Hydrometer -1 15. Amp meter digital type 16. Energy meter 17. voltmeter digital type 18.MCB 2 poll as a main switch Unit supplied with instruction manual, fault finding, wiring diagram, maintenance and brine condition for different temperature of brine. 136. Three door refrigerator 300L carrying with HC R-600a.:-
Three door refrigerator 300L carrying with HC R-600a.
TYPE 200 L CARRYING WITH HFC-134A & RECIPROCATING COMPRESSOR :- Water cooler storage type 200 L carrying with HFC-134a& reciprocating compressor with three water taps, complete water cooler body & made of Food grain SS with puff insulation and lock facility
Make- Micro Mech instruments
Model: MMI MRAC RC 017 174. WALK IN COOLER PUF Insulated for cold room 6X4.5X8 cft. Temperature 0 degree to -5 degree centigrade.
Make- Micro Mech Instruments
Model: MMI MRAC RC 022
169. AUTOMATIC ICE CUBE M/C
Capacity -50 kg/24 hr
Make- Micro Mech Instruments
Model: MMI MRAC RC 010
175. ABSORPTION SYSTEM VAPOUR ABSORTION REFRIGERATION TEST RIG
Specification
1)Sealed Circuit(Electrolux refrigerator)=: The
System has no moving parts at all, which makes it Silent and very durable. 2)Refrigerant: Mixture of three fluid system Ammonia(NH3) + Water (H2O) + Hydrogen (H2) 3)Gases: Non – CEC, Non – HCFC, Non – FCKW, Non – Freon 4)Mode of System: Externally heated by electric resistance Temperature
4) Temperature Measurement : By Temperature Transmitter.
5) Evaporator: Coil Type evaporator 6) Temperature Sensor: RTD PT-100 Type 7) Control Panel comprises of : Digital Voltmeter: 0-300 V Mains Indicator. 8) The whole set-up is well designed and arranged on a rigid structure.