Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Wichtiges Dokument 1

    Uploaded by

    modedi3266
    This document discusses requirements for anchoring end bearings on steel structures. It provides three key points: 1. Free rotating or weakly fixed end bearings require reinforcement to resist tensile forces, with at least one third of the maximum field reinforcement needed. Additional requirements apply for plates without edge reinforcement. 2. This reinforcement is placed behind the bearing face for direct bearing, with a length per equations 27 and 28. It must extend at least to the theoretical bearing line. 3. The length L1 refers to the anchorage length in section 18.5.2.2; for steel mats made of double bars it refers to the diameter of the individual bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    You might also like

    Wichtiges Dokument 1

    Uploaded by

    modedi3266
    9 views1 page
    This document discusses requirements for anchoring end bearings on steel structures. It provides three key points: 1. Free rotating or weakly fixed end bearings require reinforcement to resist tensile forces, with at least one third of the maximum field reinforcement needed. Additional requirements apply for plates without edge reinforcement. 2. This reinforcement is placed behind the bearing face for direct bearing, with a length per equations 27 and 28. It must extend at least to the theoretical bearing line. 3. The length L1 refers to the anchorage length in section 18.5.2.2; for steel mats made of double bars it refers to the diameter of the individual bar.

    Original Description:

    Original Title

    wichtiges dokument 1 (2)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document discusses requirements for anchoring end bearings on steel structures. It provides three key points: 1. Free rotating or weakly fixed end bearings require reinforcement to resist tensile forces, with at least one third of the maximum field reinforcement needed. Additional requirements apply for plates without edge reinforcement. 2. This reinforcement is placed behind the bearing face for direct bearing, with a length per equations 27 and 28. It must extend at least to the theoretical bearing line. 3. The length L1 refers to the anchorage length in section 18.5.2.2; for steel mats made of double bars it refers to the diameter of the individual bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    9 views1 page

    Wichtiges Dokument 1

    Uploaded by

    modedi3266
    This document discusses requirements for anchoring end bearings on steel structures. It provides three key points: 1. Free rotating or weakly fixed end bearings require reinforcement to resist tensile forces, with at least one third of the maximum field reinforcement needed. Additional requirements apply for plates without edge reinforcement. 2. This reinforcement is placed behind the bearing face for direct bearing, with a length per equations 27 and 28. It must extend at least to the theoretical bearing line. 3. The length L1 refers to the anchorage length in section 18.5.2.2; for steel mats made of double bars it refers to the diameter of the individual bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    'LSORPDUEHLW

    (QWZLFNOXQJHLQHVPXOWLPHGLDOHQ/HKU XQG/HUQPRGXOV
    EHUZDQGDUWLJH7UlJHULP6WDKOEHWRQEDX
    (UVW=ZHLWSUIHU3URI'U,QJ-*|WWVFKH3URI'U,QJ+ '4XLWPDQQ
    %HDUEHLWHWYRQ*HRUJ5HLPHU 0DWU1U )+121

    ',1 
    9HUDQNHUXQJDQ(QGDXIODJHUQ

     $QIUHLGUHKEDUHQRGHUQXUVFKZDFKHLQJHVSDQQWHQ(QGDXIODJHUQLVWHLQH
    %HZHKUXQJ]XU$XIQDKPHGHU=XJNUDIW)V5QDFK*OHLFKXQJ  HUIRUGHUOLFKHV
    PXVVMHGRFKPLQGHVWHQVHLQ'ULWWHOGHUJU|‰WHQ)HOGEHZHKUXQJYRUKDQGHQVHLQ
    )U3ODWWHQRKQH6FKXEEHZHKUXQJLVW]XVlW]OLFK$EVFKQLWW]XEHDFKW
    HQ

    )V5 45 YK1 

     'LHVH%HZHKUXQJLVWKLQWHUGHU$XIODJHUYRUGHUNDQWHEHLGLUHNWHU$XIODJHUXQJPLW
    GHU9HUDQNHUXQJVOlQJHO QDFK*OHLFKXQJ 

    O O t GV 

    EHLLQGLUHNWHU/DJHUXQJPLWGHU9HUDQNHUXQJVOlQJHOQDFK*OHLFKXQJ  ]X
    YHUDQNHUQLQDOOHQ)lOOHQMHGRFKPLQGHVWHQVEHUGLHUHFKQHULVFKH$XIODJHUOLQLH
    ]XIKUHQ

    O O t GV 

     'DEHLLVWO GLH9HUDQNHUXQJVOlQJHQDFK$EVFKQLWWLVWEHL
    %HWRQVWDKOPDWWHQDXV'RSSHOVWlEHQDXIGHQ'XUFKPHVVHUGHV(LQ]HOVWDEHV]X
    EH]LHKHQ
     (UJLEWVLFKEHL%HWRQVWDKOPDWWHQHUI$VYRUK$V d VRJHQJW]XU
    9HUDQNHUXQJPLQGHVWHQVHLQ4XHUVWDEKLQWHUGHUUHFKQHULVFKHQ$XIODJHUOLQLH

    D *HVWDIIHOWH6WlEH
    E $XIELHJXQJGLHQLFKW]XU6FKXEGHFNXQJKHUDQJH]RJHQZHUGHQ
    F 6FKXEDEELHJXQJYHUDQNHUWLP%HUHLFKYRQ%HWRQ]XJVSDQQXQJHQ
    G 6FKXEDXIELHJXQJYHUDQNHUWLP%HUHLFKYRQ%HWRQGUXFNVSDQQXQJHQ

    6HLWH

    You might also like