The document is a bidder's response to technical requirements for a modular mounting structure (MMS) for a solar project. It provides specifications for various components of the MMS like columns, bracing, purlins and foundations. It also lists requirements for number of piles, concrete volume, utilization ratio, and incremental costs. The bidder has provided their design details for some parameters and indicated they will confirm other details like weights, lengths, and costs as per their final approved design.
The document is a bidder's response to technical requirements for a modular mounting structure (MMS) for a solar project. It provides specifications for various components of the MMS like columns, bracing, purlins and foundations. It also lists requirements for number of piles, concrete volume, utilization ratio, and incremental costs. The bidder has provided their design details for some parameters and indicated they will confirm other details like weights, lengths, and costs as per their final approved design.
The document is a bidder's response to technical requirements for a modular mounting structure (MMS) for a solar project. It provides specifications for various components of the MMS like columns, bracing, purlins and foundations. It also lists requirements for number of piles, concrete volume, utilization ratio, and incremental costs. The bidder has provided their design details for some parameters and indicated they will confirm other details like weights, lengths, and costs as per their final approved design.
MMS Table Configuration 1 Bidder Design Mono Rail (No. of modules per Table) 2 Tilt Fixed Fixed 4 Ground Clearance (Minimum) 500 mm NA 5 Wind Speed (m/s) considered for design 44 36.7 min 2.5 mm with HDG 80 6 Column Post Thickness Min thickness NA Micron 7 Column Post Length m NA 8 Weight of Column post per Mtr Kg/mtr NA Min thickness 1.2/1.6 mm NA 9 Bracing and Rafter Galvalume Galvalume, AZ150 NA Design Thickness 1.0/1.2 mm NA 10 Purlins Yield strength Galvalume, AZ150 NA 11 Fasteners for Module Mounting SS 304 As per design Fasteners for other MMS connections except 12 SS 304 As per design module mounting Pile diameter 300mm NA Pile depth 1800mm NA 13 MMS Pile Foundation Pile cap height 200 mm NA Grade of concrete M25 NA Piles per Table NA Piles per MW NA Total piles NA Pile to pile distance <=3 m NA Concrete M3 0.1415 cum per pile NA Per MWp M3 shall to be considered 70 M3/MWp( based 14 Number of Piles constructed on Preliminary Pile Design Assumption, Actual Concrete Total Concrete NA will be certified as per Final Approved Design. ( Add/ Del Applicable only for MMS Pile Casting Only) Incremental cost Rs/M3 NA 15 Codes and Standards As per design 16 Utilization Ratio of MMS design <=0.8 As per design 17 Resulting Weight per MW(DC) MT/ MWp Bidder to Confirm As per design 18 Fencing Length Rmtr Bidder to Confirm NA 19 Peripheral Road Rmtr Bidder to Confirm NA 20 Internal road Rmtr Bidder to Confirm NA 21 Drainage Rmtr Bidder to Confirm NA 22 HT Cable length Rmtr Bidder to Confirm NA 23 Incremental cost per Tonne of MMS Rs/MT Bidder to Confirm As per design 24 Cost per rmtr of peripheral road Rs/Rmtr Bidder to Confirm NA 25 Cost per rmtr of internal road Rs/Rmtr Bidder to Confirm NA 26 Cost per rmtr of drainage Rs/Rmtr Bidder to Confirm NA 27 Cost per rmtr of HT cable Rs/Rmtr Bidder to Confirm NA 28 Cost per rmtr Fencing Rs/Rmtr Bidder to Confirm NA