Professional Documents
Culture Documents
Expt 5
Expt 5
Expt 5
: 5
Date : 28-04-2023
Problem: In the plate with a hole under plane stress, find deformed shape of the hole and
determine the maximum stress distribution along A-B. Given E = 210GPa, t = 1 mm, Poisson’s
ratio = 0.3, Dia of the circle = 10 mm. Take factor of safety = 2.5
Calculations:
Force 2000
• Pressure, p = =
Area 40 × 1
= 50 N/mm2
2000
• Nominal stress, σnom =
(40−10) × 1
= 66.67 N/mm2
= 66.67 × 2.5
= 166.67 N/mm2
24
Loading diagram:
Deformed shape:
25
Von Mises Stress:
26
Experiment No. : 6
Date : 28-04-2023
Problem: Determine the stress and displacement fields using ANSYS for the the square plate
of uniform thickness with a circular hole with dimensions shown in the figure below. The
thickness of the plate is 1 mm. The Young's modulus E =107 MPa and the Poisson ratio is 0.3.
A uniform pressure p = 1 MPa acts on the boundary of the hole. Assume that plane stress
conditions prevail.
Loading diagram:
27
Deformed shape:
28
Von Mises Strain:
29
Experiment No. : 7
Date : 02-06-2023
Problem: Analyse the steel plate shown in figure using thin shell elements when a uniform
pressure of 1 kN/m2 acts on it. Thickness of the plate is 11mm. Obtain the contour plot of the
in plane stresses and the out of plane displacement.
30