Professional Documents
Culture Documents
Foundry Technology Solved MCQs (Set-3)
Foundry Technology Solved MCQs (Set-3)
52. Which of the following facilitates shaking and lifting large pattern from the
mould?
A. Swab
B. Bellows
o m
D. Trowel
. c
E. Ripping plate te
Answer: E a
q M
c
53. In die castings, heavy local sections are usually avoided and replaced by
A. channel sections
B. corrugated forms
M
C. ribs
D. any of the above
Answer: D
55. There is no need for the withdrawal of pattern from the mould in case of
A. patterus with core
C. wax patterns
D. hollow patterns
E. consumable patterns
Answer: E
57. The sand mass does not fall out of the moulding box but is held firmly in it
when the moulding box is lifted. This is due to the property of
A. adhesiveness of sand
B. plasticity of sand
D. porosity of sand
E. refractoriness of sand
Answer: A
58. Which of the following is used to obtain fine surface finish in ferrous castings?
A. Ground pitch
B. Sea coal
C. Gilsonite
D. any of the above
Answer: D
62. The hardness of the mould is affected by the proportion of ingredients in the
sand and
A. degree of ramming
B. the temperature
C. shape of particles
E. refractoriness
Answer: A