The document describes a fire detection system using IoT that aims to detect fires early and notify people to lessen damage. The system uses a flame sensor and temperature sensor connected to a NodeMCU ESP8266 microcontroller to detect fires and trigger an alarm. It also provides remote monitoring of temperature and fire conditions through a website. The system was able to accurately detect fires and store and display results on the website.
The document describes a fire detection system using IoT that aims to detect fires early and notify people to lessen damage. The system uses a flame sensor and temperature sensor connected to a NodeMCU ESP8266 microcontroller to detect fires and trigger an alarm. It also provides remote monitoring of temperature and fire conditions through a website. The system was able to accurately detect fires and store and display results on the website.
The document describes a fire detection system using IoT that aims to detect fires early and notify people to lessen damage. The system uses a flame sensor and temperature sensor connected to a NodeMCU ESP8266 microcontroller to detect fires and trigger an alarm. It also provides remote monitoring of temperature and fire conditions through a website. The system was able to accurately detect fires and store and display results on the website.
2.Objectives - Fire is a huge danger that can damage everything. Our device will detect if there is any fire and turn on an alarm to notify people. People can also see the temperature and fire condition remotely using the website. 3.rationale - Fire can cause a huge damage if it is not taken care of early. The Fire Detection device will let people know about the fire early and help to lessen the loss. 4. background studies - Fire Detection system will be used to detect fire and alarm immediately whenever fire is detected. The website let users to keep a track of the condition and temperature of a room from anywhere in the world. So, people from anywhere in the world can know about the fire condition remotely and notify other people who are close to the fire. 5.technology used - NodeMCU ESP8266 Flame Sensor DS18b20 (Temperature Sensor) Buzzer Breadboard Jumper Wire 6. How much cost about hardware technology used NodeMCU ESP8266 - 300 Flame Sensor - 60 DS18b20 (Temperature Sensor) - 140 Buzzer - 20 Breadboard - (185X2) = 370 Jumper Wire - (8X3) = 24
7. discuss the results achieved
- The Iot device is detecting the fire with 100% accuracy. All the results are correctly storing in the database and shown in the website.