Professional Documents
Culture Documents
Nxt717-Premium-Ammonia-Compressor-Oil 3
Nxt717-Premium-Ammonia-Compressor-Oil 3
Ammonia Lubricants
Enhanced versions of the technology used by most OEMs, Isel’s ammonia refrigeration line represents the next genera-
tion of 2-stage hydrocracked ammonia refrigeration lubricants. They are specifically formulated to provide the highest level
of performance and protection possible. This has been achieved through our detailed knowledge of ammonia refrigeration
systems and more than two decades of experience manufacturing advanced ammonia refrigeration lubricants.
NXT 717 has an exceptionally low pour point for enhanced cold-temperature performance. Variations of NXT 717 include
food-grade NXT 717-FG, extreme-low pour point NXT 717-XLT, and seal-conditioning NXT 717-SC.
The information on Isel and competitive products provided should only be used as a general guide. Lubricant properties are typical results and should not serve as a sole resource for determining the correct
lubricant for a particular application. Please consult an Isel representative to ensure that the product is the correct choice for the application. Revised 10/2016
Viscosity (cSt)
100
Viscosity cSt @ 0°C 448 80
Viscosity cSt @ 40°C 62 60
Viscosity cSt @ 100°C 8.7 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Typical Flash Point °F (°C) 480 (249) Hours
Typical Pour Point °F (°C) -44 (-42) NXT 717’s proprietary additive package
Demulsibility 54.4°C, 30 Min 40/40/0 significantly increases fluid life
Copper Corrosion, 24 Hr 1a
4 250,000
Viscosity (cSt) @ -30°C
3.5 200,000
% Solubility
3 150,000
2.5 100,000
2 50,000
1.5 0
NXT 717 NXT 717-SC Alkyl Naphthenic PAO/AB NXT 717 NXT 717-SC Alkyl Competitive
Benzene Oil Mineral Oil Oil Benzene Semi-Synthetic
Solubilized ammonia in a lubricant reduces the NXT 717 offers superior low-temperature fluidity
viscosity of the fluid and thus reduces the load
carrying capability of the lubricant
The information on Isel and competitive products provided should only be used as a general guide. Lubricant properties are typical results and should not serve as a sole resource for determining the correct
lubricant for a particular application. Please consult an Isel representative to ensure that the product is the correct choice for the application. Revised 10/2016