Professional Documents
Culture Documents
Sheet
Sheet
Sheet
OpAmp applications 2
1- Find the Vref such that we can get the output waveform has 25% Duty Cycle
Fig. 1
Fig. 2
Fig. 3
4- Design the Schmitt Trigger for the given Hysteresis Curve (Find R1, R2, Vref)
Fig. 4a
Fig. 4b
5- Find the value of R1 such that the circuit has 1V Hysteresis Width
Fig. 5
6- Schmitt trigger circuit shown in Fig. (6) is used to control the temperature of a furnace
T (OC) where Vi is given by
Vi = 0.01 (T - 25)
If R1 = 100 k, R2 = 2 k, VR = 5 V and VZ = 12 V calculate
(a) Maximum furnace temperature T max.
(b) Minimum furnace temperature T min.
(c) Furnace setting temperature TSP .
7- For the circuit shown in Fig. (6), VZ = 12 V, R1 = 100 k and Vi = 0.005 (T-20) where
T is the temperature of a furnace in OC. If the temperature setting point is 250 + 15OC,
calculate
(a) R2
(b) VR
Fig. 6