Professional Documents
Culture Documents
Slot Test - 1 Question Paper - 2023-24 - 24.09.2023
Slot Test - 1 Question Paper - 2023-24 - 24.09.2023
Slot Test -1
Subject Name – Design of R.C. Structure
Subject Code – CE(PC)501
Maximum Marks – 25 Duration – 1 Hour Date – 25.09.2023
(Use of IS456:2000 and Sp:16 is allowed in the examination hall)
Maximum CO BT
Q.N. Questions
Marks Level Level
Group A
(Answer any 5 Questions)
The flexural strength of concrete is given by
A. 0.6√fck
1 1 CO3 BT1
B. 0.7√fck
C. 0.5√fck
D. 0.8√fck
Tolerance on placing the reinforcement for effective depths 200 mm or less is
A. +/-5mm
2 1 CO3 BT1
B. +/-6mm
C. +/-8mm
D. +/-10mm
The effective span of member that is not built integrally with its supports
Shall be taken as ....
A. 0.36 fck Xu
6 1 CO3 BT1
B. 0.446 fck Xu
C. 0.45 fck Xu
D. 0.57 fck Xu
DR. SUDHIR CHANDRA SUR INSTITUTE OF TECHNOLOGY
AND SPORTS COMPLEX
540 Dum Dum Road, Surermath, (Near Dum Dum Jn. Station), Kolkata-700074
Phone: +91 33 25603889, 25603898, 65330375Website: www.surtech.edu.in Email: info@dsec.ac.in
Group B
(Answer any 4 Questions)
Determine the bending moments for the following restrained slab considering
all the boundary conditions. Assume the live load on slab to be 2KN/m2 and
the finishing load to be 1 KN/m2.
1 5 CO4 BT5
Slot Test -1
Subject Name – Structural Analysis - 1
Subject Code – CE(PC)503
Maximum Marks – 25 Duration – 1 Hour Date – 25.09.2023
Maximum CO BT
Q.N. Questions
Marks Level Level
Group A
(Answer any 5 Questions)
Number of unknown internal forces in each member of a rigid jointed plane
frame is
1 a) 1 1 CO1 BT1
b) 2
c) 3
d) 6
Degree of kinematic indeterminacy of a pin-jointed plane frame is given by
a) 2j – r
2 1 CO1 BT1
b) j – 2r
c) 3j – r
d) 2j + r
The deflection at any point of a perfect frame can be obtained by applying a
unit load at the joint in
a) displacements
4 1 CO5 BT1
b) force
c) displacements and forces
d) none of the above
The value of Bending moment at any position on a three hinged arch apart
from the Central Hinge is -
Determine the Horizontal reaction for the below 3-Hinged Arch shown below
2 5 CO3 BT5
-
Determine the Vertical Deflection at Joint C for the following Truss
3 5 CO6 BT5
4 5 CO6 BT5
Determine the Vertical deflection at joint D for the following structure using
Unit Load Method.
5 5 CO6 BT5
DR. SUDHIR CHANDRA SUR INSTITUTE OF TECHNOLOGY
AND SPORTS COMPLEX
540 Dum Dum Road, Surermath, (Near Dum Dum Jn. Station), Kolkata-700074
Phone: +91 33 25603889, 25603898, 65330375Website: www.surtech.edu.in Email: info@dsec.ac.in
Slot Test -1
Subject Name – Structural Dynamics
Subject Code – CE(PC)704A
Maximum Marks – 25 Duration – 1 Hour Date – 25.09.2023
Maximum CO BT
Q.N. Questions
Marks Level Level
Group A
(Answer any 5 Questions)
D-Alembert's principle is used for the following
A. Coil Diameter
2 1 CO1 BT1
B. Material Strength
C. Number of Active Turns
D. Wire diameter
3. Earthquake force is a -
A. Lateral force
3 1 CO2 BT2
B. Vertical force
C. Both a and b
D. None of the above
4. In which direction does the accelerating force acts?
5 5 CO1 BT5
Assume K1 = 20 KN/m,
K2 = 2 Times K1,
K3= ¾ Times of K2,
K4 = 1.5 Times K1