Professional Documents
Culture Documents
Hinge Guide
Hinge Guide
Hinge Guide
Jl-
at one side is such that the door can be --..: c
opened safely.
J
Overlay (Door overlay)
Half overlay
In this configuration, two doors are
positioned in front of the middle wall
of a cabinet. The distance between
the doors is the total required reveal.
The door overlay is reduced which
necessitates the use of cranked hinges.
~
The overlay is the distance by which
the door projects over the cabinet front.
Overlay
-------r
L i
Jl ~
0
Reveal
Inset The reveal is the distance between the outer
In this configuration, the door is positioned edge of the door and the outer side of the
II
inside the side wall of the cabinet. A reveal cabinet (full overlay), the distance between
is required for opening the door. This two doors (half overlay), the distance between
configuration necessitates the use of heavily the outer edge of the door and the inner side
cranked hinges. of the cabinet (inset).
L Revea l
Door adjustment
Intermat
Height adjustment Snap-on assembly. disassembly
Characteristic for Intermat hinges is the ergonom ica l
snap-on assembly. The hinge is slipped into the front of the
mounting plate (1), then a light finger pressure -and the hinge
] C arm latches onto the mounting plate (2) with an audible cl ick.
J C
The hinge arm is now securely clamped , via f ive points,
with zero play.
±2 mm Doors are clipped on zipper style from top to bottom -
±2 mm
the top hinge alone is capable of taking the total weight
Using height-adjustable mounting plates Direct, variable height adjustment of the door.
makes it possible to align the exact door height. with eccentric screw
Disassembly is carried out in the opposite direction
from bottom to top.
~:, : ]1"'0'
D Overlay mm D Overlay mm
Side I Distance (D)
o 16 17 17,5 18 19 o 16 17 17,5 18 19
15 14,5 15,5 [I[] 16,5 17,5 15 14,5 15,5 [I[] 16,5 17,5
3 13 14 14,5 15 16 3 13 14 14,5 15 16
4,5 11,5 12,5 13 13,5 14,5 Overlay 4,5 11,5 12,5 13 13,5 14,5
8 8 9 9,5 10 11 -------r- 8 8 9 9,5 10 11 I Door
3 4 45 5 6 Door 3 4 45 5 6
Cup distance C mm J U:up distance C Cup distance C mm J LCup distance C
Step 4: Check minimum revea l Step 4: Check minimum revea l
The min imum revea l The minimum revea l
is reduced for doors with rad ii: 1 mm rad ius: tab le entry - 0,4 mm is reduced for doors with radii : 1 mm radius: tab le entry - 0,4 mm
3 mm radius: tab le entry - 1,2 mm 3 mm radius: tab le entry - 1,2 mm
"~'" J\
C mm 16 17 18 19 20 C mm 16 17 18 19 20
3 0,6 0,8 1,1 1,5 1,9 3 0,6 0,8 1,1 1,5 1,9
4 0,5 0,7 1,0 1.4 1,8 4 0,5 0,7 1,0 1.4 1,8
Door
@;]] 0,5 0,7 1,0 o:Al 1,8
--------lI-
@;]] 0,5 0,7 1,0 !L!l 1,8
- 0".
5 0,5 0,7 1,0 1.4 1,8 Reveal S 0,5 0,7 1,0 1.4 1,8 -'-'.':..':.':.
6 0,5 0,7 1,0 1.4 1,7 6 0,5 0,7 1,0 1.4 1,7