KREBS-26 is a natural rubber compound designed for slurry pump applications. It has a hardness of 35 Shore A and can operate in temperatures ranging from -51°C to 82°C. KREBS-26 provides excellent abrasion resistance and wear life in pumps, with a tensile strength of 2000 PSI and modulus of 75 PSI. It is recommended for fine to medium size solids at tip speeds below 4,315 ft/min.
KREBS-26 is a natural rubber compound designed for slurry pump applications. It has a hardness of 35 Shore A and can operate in temperatures ranging from -51°C to 82°C. KREBS-26 provides excellent abrasion resistance and wear life in pumps, with a tensile strength of 2000 PSI and modulus of 75 PSI. It is recommended for fine to medium size solids at tip speeds below 4,315 ft/min.
KREBS-26 is a natural rubber compound designed for slurry pump applications. It has a hardness of 35 Shore A and can operate in temperatures ranging from -51°C to 82°C. KREBS-26 provides excellent abrasion resistance and wear life in pumps, with a tensile strength of 2000 PSI and modulus of 75 PSI. It is recommended for fine to medium size solids at tip speeds below 4,315 ft/min.
Natural rubber designed for slurry • Hardness Shore “A”: 35 5
applications. The high resilience and optimized formula provides excellent • Operating Temperature Range abrasion resistance. This rubber has been • -51ºC up to 82ºC proven in thousands of pumps to provide superior wear life. • -60ºF up to 180ºF
• ASTM D-412 and D-624
When to use KREBS-26 • Tensile Strength
Due to its propietary formula providing o 2000 PSI (13.8 MPa)
optimized physical properties and wear resistance, KREBS-26 is recommended for • Modulus 300% fine to medium size solids. o 75 PSI (0.5 MPa) Recommended for Tip speeds below: • Elongation 4,315 ft/min (21.9 m/sec) o 550% Color Microstructure Standard Color is blue. KREBS-26 is a proprietary reinforced natural Wear Resistance rubber compound designed for slurry pump applications. KREBS-26 has outstanding abrasion resistance especially for sliding abrasion and Storage fine solids and is recommended for many Recommended practice is to store the part pump applications. as close as possible to its installed Chemical Resistance configuration to protect the material and shape of the part. In addition parts should KREBS-26 has moderate resistance against be stored away from direct heat, sunlight chemical slurries. KREBS-26 has low and other factors which can reduce the life resistance to oils, but fair to good resistance of rubber. Inspect for cracking, degradation, against some acidic and alkaline conditions. discoloration and other signs of rubber degradation.
FLSmidth 5505 W. Gillette Rd., Tucson, AZ 85743 Ph: 520-744-8200 – Fax: 520-744-8300