Professional Documents
Culture Documents
Catálago Completo Alfa Laval
Catálago Completo Alfa Laval
Catálago Completo Alfa Laval
Plant components
catalogue
© 2008 Tetra Pak Processing Components AB, Lund, Sweden, TPPS10433 en, 2008-12.
www.tetrapak.com
Total support from Tetra Pak
With its extensive range of plant components, Tetra Pak can help you
achieve maximal processing uptime at minimal life-cycle costs. The
combination of personal service and total product life-cycle support adds
value to the components you purchase.
Our decades of knowledge on both food processing and packaging are
at your disposal when selecting components best suited to particular
processing conditions. Excellent logistics make sure that parts ordered get
to you in the shortest time possible. And our support services around the
world are ready to meet your after-sales needs, including on-site visits.
The attention to detail as part of Tetra Pak ’s personal adds to the
convenience and time-saving benefits you gain from a single-source
supplier.
Environmental care
In our environmental work we focus on the performance of our products in
use, identified as our most significant environmental impact. Important
aspects are reduced energy and water consumption, minimal loss of food
product, control of substances in the components, and that they are
prepared for dismantling and reuse of materials when taken out of
production.
The manufacturing of components at our suppliers is also subject to our
continuous environmental work in order to minimize their environmental
impact. The work is performed with the support of our environmental
management system, certified according to ISO 14001.
2008/11 3
4 2008/11
Select the right
components
HOW TO FIND IT
1. Select the right components 9
1.1 Specialist knowledge ............................................10
1.2 Personal service ....................................................10
1.3 Production security ...............................................10
Valves
1.4 Single-source supplier ..........................................10
1.5 Excellent logistics .................................................10
1.6 Tetra PlantCare™ .................................................10
2. Valves 11
2.1 Sanitary valves ......................................................13
Pumps
2.1.1 Seat valves .............................................................14
2.1.1.1 Seat valves ..........................................................14
2.1.1.2 Unique single seat valves ..................................19
2.1.2 Constant pressure valves ......................................31
2.1.3 Mixproof valves .....................................................34
2.1.3.1 Unique Mixproof valves .....................................34
Measuring instruments
2.1.3.2 Mixproof valves ..................................................39
2.1.3.3 Unique Mixproof Tank Outlet valves ...............45
2.1.4 Non-return valves ..................................................46
2.1.5 Regulating valves ..................................................47
2.1.6 Sampling valves .....................................................51
2.1.7 Shut off valves .......................................................55
2.1.7.1 Butterfly valves ...................................................55
2.1.7.2 Sanitary ball valves .............................................68
Integration components
2.1.8 Accessories ............................................................70
2.1.8.1 Actuators ............................................................70
2.1.8.2 Handles ...............................................................73
2.1.8.3 Mounting brackets .............................................74
2.1.9 Control/Indication .................................................75
2.1.9.1 Top units .............................................................75
2.1.9.2 Indication units ...................................................79
Automation and electrical
3 Pumps 115
3.1 Sanitary pumps ................................................... 116
3.1.1 Centrifugal pumps ..............................................117
3.1.2 Eccentric scew pumps ........................................164
3.1.3 Liquid ring pumps ...............................................166
Valves
Valves
5.2.2 Sanitary hoses ......................................................289
5.2.3 Non-Sanitary hoses .............................................293
5.2.4 Accessories ..........................................................294
5.2.4.1 Hose clamps .....................................................294
5.3 Fittings ................................................................296
5.3.1 Sanitary fittings ....................................................297
5.3.1.1 Welding liners ..................................................297
Pumps
5.3.1.2 Hose liners ........................................................299
5.3.1.3 Welding male parts .........................................300
5.3.1.4 Adapter male parts ..........................................302
5.3.1.5 Nuts ...................................................................302
5.3.1.6 Pipe bends .......................................................304
5.3.1.7 Concentric reducers ........................................313
Measuring instruments
5.3.1.8 Eccentric reducers ...........................................318
5.3.1.9 T-pipes ..............................................................320
5.3.1.10 Blanks ................................................................327
5.3.1.11 End caps ...........................................................329
5.3.1.12 Complete unions .............................................330
5.3.1.13 Clamp rings ......................................................332
5.3.1.14 Clamp Ferrules .................................................333
5.3.2 Non-sanitary fittings ...........................................335
Integration components
5.3.2.1 Welding neck flanges ......................................335
5.3.2.2 Hose nipple ......................................................337
5.3.2.3 Pipe bend .........................................................338
5.3.2.4 Concentric reducer ..........................................339
5.3.2.5 T-pipe ...............................................................340
5.4 Other Components .............................................341
5.4.1 Sanitary ................................................................342
Automation and electrical
Pumps
1.3 Production security ...............................................10
1.4 Single-source supplier ..........................................10
1.5 Excellent logistics .................................................10
1.6 Tetra PlantCare™ .................................................10
Measuring instruments
Integration components
Automation and electrical
components
Index
Select the right
components
Unlike most component suppliers whose obligations are limited to product warranty, Tetra Pak plant components
incorporate a lot of added value. We have a real interest in helping you select the right components needed to
keep your plant up and running in good condition. We want to establish and maintain mutual profitable
relationships.
The major benefits you gain when dealing with Tetra Pak are:
10 2008/11
Select the right
components
Valves
2. Valves
2.1 Sanitary valves ......................................................13
2.1.1 Seat valves ............................................................ 14
2.1.1.1 Seat valves ......................................................... 14
2.1.1.2 Unique single seat valves ................................. 19
2.1.2 Constant pressure valves ..................................... 31
Pumps
2.1.3 Mixproof valves .................................................... 34
2.1.3.1 Unique Mixproof valves .................................... 34
2.1.3.2 Mixproof valves ................................................. 39
2.1.3.3 Unique Mixproof Tank Outlet valves ............... 45
2.1.4 Non-return valves ................................................. 46
Measuring instruments
2.1.5 Regulating valves ................................................. 47
2.1.6 Sampling valves .................................................... 51
2.1.7 Shut off valves ....................................................... 55
2.1.7.1 Butterfly valves .................................................. 55
2.1.7.2 Sanitary ball valves ............................................ 68
2.1.8 Accessories ........................................................... 70
2.1.8.1 Actuators ............................................................ 70
2.1.8.2 Handles .............................................................. 73
Integration components
2.1.8.3 Mounting brackets ............................................ 74
2.1.9 Control/Indication ................................................ 75
2.1.9.1 Top units ............................................................ 75
2.1.9.2 Indication units .................................................. 79
2.1.10 Plug cocks ............................................................. 83 Automation and electrical
components
Index
Select the right
components
Valves
This category of plant components covers a wide range of valves for sanitary (e.g.
aseptic processing) applications.
Butterfly valves, ball valves and seat valves are common choices for stopping flow of differ-
ent products.
Seat valves are also mainly used as change-over valves for change of flow direction.
For regulating of product flow either a constant pressure valve or a flow control valve is
chosen.
Mixproof seat valves are the optimum choice when there is a need for safe separation of
two different fluids flowing through one valve.
Non-return valves are used to prevent backflow.
To take samples of product manual sampling valves are used.
Control units as ThinkTop and BasicTop are used to ensure optimum valve control.
The range of SRC and ARC will gradually be replaced by the range of Unique Single Seat Valves, (Unique SSV).
The launch period of Unique SSV continues during 2007, part of both ranges are in this catalogue since the
replacement process was not ready during the production of this catalogue.
Contact your local TP representative if you need more information.
LKAP
The LKAP pneumatic valve is a remote-controlled shut-off valve, designed for food, chemical and other industries.
The valve is operated by means of compressed air and has spring return. It has few and simple moving parts which
results in a very reliable valve.
LKAP consists of actuator with air cylinder and piston, double lipseal for stem, stem unit with replaceable O-ring in
the plug, and valve body with welding connections. It has visual indication of the valve position and is available with
2 (LKAP-V) or 3 ports (LKAP-T). A reed switch unit for indication of open and closed positions is available. The valve
can be ordered as normally open (NO) or normally closed (NC) versions. NC is standard.
ARC
ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited
for aseptic operating conditions such as high sterilisation temperatures. ARC is characterised by excellent
cleanability. ARC is operated by means of compressed air and can be supplied with or without spring return. Sterile
stem sealing towards the atmosphere is ensured by a special designed PTFE/rubber diaphragm unit. The PTFE
diaphragm does not allow product residues to build up on the product contact surface. ARC is based on the SRC
valve design. It consists of actuator, bonnet, stem with diaphragm unit and valve bodies. The valve is assembled by
means of clamp rings and a stem clip system for easy maintenance.
Actuator function
- Pneumatic downward movement, spring return (NO)
- Pneumatic upward movement, spring return (NC)
- Pneumatic upward and downward movement (A/A)
ARC-SB
ARC-SB is an aseptic seat valve with steel bellows. The valve is suited for aseptic operating conditions such as high
sterilisation temperatures. ARC-SB is designed for applications with high activation frequencies. ARC-SB is
operated by means of compressed air and can be supplied with or without spring return. Sterile stem sealing
towards the atmosphere is ensured by a special designed valve plug with steel bellows. ARC-SB is based on the
SRC valve design. It consists of actuator, stem with steel bellows and valve bodies. The valve is assembled by means
of clamp rings and a stem clip system for easy maintenance.
14 2008/11
2. Valves
Sanitary valves / Seat valves
LKAP
Valves
Description Denomination A E G Part No.
ARC - Inch
16 2008/11
2. Valves
Sanitary valves / Seat valves
ARC - DIN
Valves
Description Denomination A1 E Part No.
18 2008/11
2. Valves
Sanitary valves / Seat valves
Valves
The sanitary and flexible design of the Small Singel Seat valve can be used in a wide range of applications, as a
stop valve with 2-3 ports. The valve is suitable for use in food, beverage, dairy and pharmaceutical industries. The
valve is available as DN/OD 12.7 mm and 19 mm and consist of actuator, sealing element, lip seal, plug and valve
bodies. Bodies and actuator are assembled with clamps.
Features
Material: 1.4404 (316L)
Inside surface finish: Ra < 0.5 µm
Features
Material: 1.4404 (316L)
Inside surface finish: Ra < 0.8 µm
Outside surface finish: Blasted
Option
Maintable acuator (can change NC/NO)
SSSV 21 SSSV-W-12.7-NC-Cl/Hex nut EPDM 200.2 29.8 45.0 32.3 6-9612 94 6210
Normally closed (NC)
Connection: Welding ends SSSV-W-12.7-NC-Cl/Hex nut FPM 200.2 29.8 45.0 32.3 6-9612 94 6307
Seals: EPDM/FPM
20 2008/11
2. Valves
Sanitary valves / Seat valves
Valves
Description Denomination E Part No.
22 2008/11
2. Valves
Sanitary valves / Seat valves
Valves
Description Denomination A E C Part No.
24 2008/11
2. Valves
Sanitary valves / Seat valves
Valves
Description Denomination A C E Part No.
26 2008/11
2. Valves
Sanitary valves / Seat valves
Valves
Description Denomination A E C Part No.
28 2008/11
2. Valves
Sanitary valves / Seat valves
Valves
Description Denomination A E C Part No.
30 2008/11
2. Valves
Sanitary valves / Constant pressure valves
CPM
Valves
CPMI-2, CPMI-D60 and CPMO-2 are sanitary constant-pressure valves for use in stainless steel pipe systems.
CPMI-2 and CPMI-D60 (Constant-Pressure Modulating Inlet) maintain a constant pressure in the process line at
the inlet side of the valve. Typical applications of CPMI-2 and CPMI-D60 are after separators, heat exchangers etc.
and as overflow valves.
CPMO-2 (Constant-Pressure Modulating Outlet) maintains a constant pressure in the process line at the outlet
side of the valve. Typical applications of CPMO-2 are before filling/bottling machines etc.
CPMI-2, CPM-I-D60 and CPMO-2 are remote-controlled by means of compressed air. The valves operate without a
transmitter in the product line and require only a pressure-regulating valve for the compressed air and a pressure
gauge in the product line. A diaphragm/valve plug system reacts immediately to any alteration of the product
pressure and changes position so that the preset pressure is maintained.
CPMI-2 and CPM-I-D60 open at increasing product pressure and vice versa. CPMO-2 closes at increasing product
pressure and vice versa.
Standard Design
The CPMI-2 and CPMO-2 consist of a valve body with valve seat, cover, a valve plug with a diaphragm unit and a
clamp. The diaphragm unit consists of a stainless steel disc, which is divided into sectors, and of flexible
diaphragms, which are placed on each side of the sectors. The cover and the valve body are clamped together. The
valve body and the seat are welded together.
The CPM-I-D60 consists of upper and lower valve bodies, an inlet tube, a cover, a valve plug with diaphragm unit
and clamps. The diaphragm unit consists of two flexible diaphragms supported by 12 stainless steel sectors in
between them. The cover and the valve bodies are clamped together.
CPM - Inch
Valves
CPMO-2 CPMO-2-W- 51-Kvs 23 EPDM 211.0 229.3 89.2 110 6-9612 30 5502
Connection: Welding ends
Material: 1.4404 (316L) CPMO-2-W- 51-Kvs 2/15 EPDM 175.1 193.4 49.2 110 6-9612 30 5504
Seals, lower diaphragm:
EPDM/PTFE CPMO-2-W-51-Kvs=9 EPDM 175.1 229.3 49.2 110 6-9612 30 5518
A
CPM - DIN
32 2008/11
2. Valves
Sanitary valves / Constant pressure valves
CPM - Accessories
Valves
Description Denomination A B C D H J Part No.
Air pressure regulating valve Air regulating kit CPM 186 93 54 47 - - 6-31356 0150 1
Range: 0-8 bar
H Booster for CPM Booster for CPMI-2 D60 95 - - - 165 110 6-31356 0090 1
Booster 3 for cover with thread
A
Unique
The exceptional concept of this mixproof valve is characterized by excellent unmatched flexibility - yet still being
very simple. The reliable modular design gives you the perfect valve for your exact needs in all mixproof opera-
tions with two different products flowing through one valve.
Unique is remote-controlled by means of compressed air. The valve is a normally closed (NC) valve. The valve has
two independent plug seals, forming a leakage chamber between them under atmospheric pressure during every
working condition. In case of rare accidental leaking of product, this will flow into the leakage chamber and be
discharged through the leakage outlet. When the valve is open, the leakage chamber is closed. The product can
then flow from one line to the other. The valve can be cleaned and water hammer protected to any level according
to the needs in the specific process. There is virtually no spillage of product when operating the valve.
SpiralClean
The Unique concept SpiralClean system to clean the upper and lower balanced plugs and leakage chamber,
helping to meet the high hygienic standards of the sanitary flow industry. The system cleans more efficiently, uses
less cleaning fluid by ensuring that a directional flow of CIP fluid reaches all the surfaces in much less time than with
conventional systems. All external CIP systems for Unique includes the SpiralClean design as standard. Another
benefit from the SpiralClean system is that it allows the Unique Mixproof valve to run under aseptic-like conditions.
If you apply steam to the CIP pipes, this will form a steam barrier to the atmosphere.
34 2008/11
2. Valves
Sanitary valves / Mixproof valves
Valves
Description Denomination Part No.
36 2008/11
2. Valves
Sanitary valves / Mixproof valves
Valves
Description Denomination Part No.
38 2008/11
2. Valves
Sanitary valves / Mixproof valves
SMP-BC
Valves
SMP-BC is a sanitary pneumatic seat valve, designed for safety and leak detection when two different products
flow through only one valve. The valve is for use in stainless steel pipe systems.
SMP-BC is remote-controlled by means of compressed air. The valve is a normally closed (NC) valve. The valve is
fitted with two small pneumatic normally open (NO) valves, a detecting valve and a CIP-valve.
The valve plug (the upper plug in a change-over valve) has two seals, forming a leakage chamber under
atmospheric pressure between them. Leaking product flows into the leakage chamber and is discharged through
the detecting valve.
SMP-BC can be cleaned by CIP by supplying compressed air to the actuator. During cleaning the valve, flow pattern
against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.
SMP-BC is available in two versions, as a stop valve with one valve body or as a change-over valve with three valve
bodies (sizes DN125-150 only as stop valve).
The valve bodies and the external actuator are clamped together.
SMP-SC
SMP-SC is a sanitary pneumatic seat valve, designed for mixproof operation when two different products flow
through only one valve. The valve is for use in stainless steel pipe systems.
SMP-SC is remote-controlled by means of compressed air. The valve is a normally closed (NC) valve. The valve has
two independent plug seals, forming a leakage chamber between them under atmospheric pressure during every
working condition. Leaking product flows into the leakage chamber and is discharged through the leakage outlet.
When the valve is open the leakage chamber is closed. The product can then flow from one line to the other.
The valve can be cleaned by CIP.
SMP-SC is fitted with a balancing cylinder in the lower part of the valve body, which makes it insensitive to high
pressure and water hammer.
The valve consists of two bodies, which are welded together. The seats for the upper and lower plugs are located
between the bodies. The valve has an external actuator, which is clamped to the top of the valve body. The actuator
and the internal parts can be removed without any interference with the pipelines. All the seals and the guide rings
can be serviced.
SMP-BC - Inch
Valves
40 2008/11
2. Valves
Sanitary valves / Mixproof valves
SMP-BC - DIN
Valves
Description Denomination A1 E Part No.
SMP-SC - Inch
Valves
42 2008/11
2. Valves
Sanitary valves / Mixproof valves
SMP-SC - DIN
Valves
Description Denomination A C E G Part No.
44 2008/11
2. Valves
Sanitary valves / Mixproof valves
Unique-TO
Valves
The concept of this mixproof valve is characterized by excellent unmatched flexibility - yet still being very simple.
The modular design gives you the perfect valve for your exact needs in all mixproof tank outlet operations allow-
ing two different products in pipeline and tank.
The body can be turned in any position if the clamp are slightly loosened.
Unique-TO offers pipe sizes from ISO51-101.6 and DN50-150.
The valve has two independet plug seals, forming a leakage chamber. In the leakage chamber there is only
atmospheric pressure during every working condition. In case of rare accidental leaking of product, this flow into
the leakage chamber and be discharged through the leakage outlet. When the valve is open, the leakage chamber
is closed. The product can then flow from tank to pipeline.
The valve is water hammer protected in the pipeline due to the balanced plug that prevent the plug from closing to
fast, when closing in the direction of product flow.
UNIQUE-Tank Outlet
LKC-2
Valves
Non-return valve LKC-2 is designed for use in stainless steel pipe installations to prevent reverse flow. LKC-2
opens when the pressure below the valve plug exceeds the pressure above the plug and the spring force. The
valve closes when pressure equalization has been achieved. A higher counter pressure will press the valve plug
against the seat. The valve body is in two parts, assembled by means of a clamp ring and hygienically sealed with
a special seal ring. A guide disc and four legs guide the spring loaded valve plug with an O-ring seal. LKC-2 has
welding ends for ISO or DIN connections.
LKC-2
46 2008/11
2. Valves
Sanitary valves / Regulating valves
SMO-R
Valves
The sanitary and flexible design of the SMO valve can be used in a wide range of applications, eg. as a stop valve
with two or three ports. SMO-R is a regulating valve used for manual control of pressure and flow. The valves per-
mit gradual opening and the few and simple moving parts result in very reliable valves easy to dismantle. Operat-
ing the SMO-R, the plug can be fixed in the adjusted position with a lock screw. SMO-R are manually operated
versions of the pneumatic remote-controlled SRC valve. The SMO can easily be converted to a SRC valve by
replacing the crank mechanism with an SRC actuator. The other parts are identical.
SPC-2
SPC-2 is a sanitary electro-pneumatic modulating valve for use in stainless steel pipe systems. Typical applications
of SPC-2 are control of pressure, flow, temperature, level in tanks etc. SPC-2 is remote-controlled by an electrical
signal and compressed air. The valve is available with a normally open (NO) actuator as standard but can be
supplied with a normally closed (NC) actuator. The actuator can easily be changed from a NO-version to a
NC-version or vice versa. The IP-converter, which is an integrated part of the actuator, converts the electrical signal
to a pneumatic signal. This signal conversion is extremely insensitive to pressure shocks. The pneumatic signal is
transmitted to the integrated positioner, which operates by means of the force-balance principle, ensuring that the
position of the actuator piston is directly proportional to the input signal. Signal range and zero point can be
adjusted individually. The actuator can be used for split-range operation by using a different measuring spring. The
valve consists of valve body, valve plug, lip seal, bonnet and an external actuator. The actuator with the bonnet is
fitted to the valve body by means of a clamp. The actuator has an integrated IP-converter and positioner which
offers substantial advantages compared to externally fitted positioners. All the moving parts are enclosed in the
actuator and therefore well protected against damage and dirt. The actuator has few moving parts, and two main
actuator sizes cover all valve sizes.
SMO-R
Valves
SMO-RF
48 2008/11
2. Valves
Sanitary valves / Regulating valves
SPC-2 - Inch
Valves
Description Denomination A E G Part No.
SPC-2 - DIN
Valves
50 2008/11
2. Valves
Sanitary valves / Sampling valves
Valves
The Keofitt Aseptic Sampling Valve is designed for sterilization before and after each sampling.
The valve consists of three parts, a valve body, a valve head and a membrane. The rubber membrane is placed on
the stem of the valve head and works as a stretchable plug. The valve bodies and valve heads are interchange-
able.
Valve bodies:
- Type T: Tank welding
- Type P: Pipe welding
Valve heads:
- Type H: Turning head
- Type K: Removable key
- Type Q: Quick lever
- Type N: Manually and pneumatic operated
M4
Valves
52 2008/11
2. Valves
Sanitary valves / Sampling valves
W9
Valves
Description Denomination Part No.
Gasket for type 20 and Gasket, Ring P20 NBR - - - 6-32235 0904 6
weld-in connection
Size: 23/11x1
Material: NBR
54 2008/11
2. Valves
Sanitary valves / Shut off valves
Valves
LKB
LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems. LKB is
either remote-controlled by means of an actuator or manually operated by means of a handle. The actuator is
made in three standard versions, normally closed (NC), normally open (NO) and air/air activated (A/A). The actua-
tor is designed so that an axial movement of a piston is transformed into a 90° rotation of a shaft. The torque of
the
actuator is increased when the valve disc contacts the seal ring of the butterfly valve.
The handle for manual operation mechanically locks the valve in its open or closed position. The handles for the
valve sizes DN125 and DN150, which are designed for locking in two intermediate positions, enables adjusting of
the valve, so that the flow rate can be regulated. The valve consists of two valve body halves, valve disc, bushes for
the disc stem and seal ring. LKB-F also consists of two flanges and two flange seal rings. The valve is assembled by
means of screws and nuts.
Two actuator sizes, ø85mm and ø133mm, cover all valve sizes. The actuator is available in two versions, LKLA and
LKLA-T. The actuator is fitted onto the valve by means of a bracket and screws. The handle for manual operation is
fitted onto the valve by means of a cap/block system and a screw. The valve has welding ends as standard, but LKB
and LKB-2 can also be supplied with fittings.
56 2008/11
2. Valves
Sanitary valves / Shut off valves
Valves
Description Denomination Part No.
58 2008/11
2. Valves
Sanitary valves / Shut off valves
Valves
Description Denomination Part No.
60 2008/11
2. Valves
Sanitary valves / Shut off valves
Valves
Description Denomination Part No.
LKB - Inch
62 2008/11
2. Valves
Sanitary valves / Shut off valves
Valves
1.4307 (304L), Silicone (Q) LKB-W-25-304-Q 32.5 47 6-9611 44 0300
Seals: Silicone (Q)
Connection: Welding LKB-W-38-304-Q 32.5 47 6-9611 44 0250
Material: 1.4307 (304L)
LKB-W-51-304-Q 42.0 52 6-9611 44 0260
64 2008/11
2. Valves
Sanitary valves / Shut off valves
LKB-2 - DIN
Valves
Description Denomination E H1 Part No.
LKB-F - Inch
66 2008/11
2. Valves
Sanitary valves / Shut off valves
LKB-F - DIN
Valves
Description Denomination E H2 Part No.
SBV
Valves
SBV is a sanitary ball valve designed for use as a product valve. The full bore design with zero flow restriction
makes SBV the optimum choice for viscous or particulate liquids. A precision made ball with a bore is positioned
inside the valve body between two flanges and two PTFE valve seats. A 90° rotation of the valve stem is transferred
to the ball and thereby opening or closing the valve.
SBV is operated by a pneumatic actuator or manually operated by means of a handle. SBV consists of a valve
body, two flanges, PTFE valve seats, ball, stem unit and a handle or bonnet and actuator unit. SBV is a full bore
valve with a constant pipeline diameter and a flow restriction comparable to that of a straight tube. A special
selected PTFE material grade secures long lifetime of the product wetted seals. Reliable valve stem sealing is
achieved by the use of spring loaded and self adjusting seal rings. The standard actuator is prepared for position
indication with
inductive proximity switches. A special actuator (option) is designed for mounting of the ThinkTop®.
The actuator is maintenance free. Two inspection holes in the bonnet connecting valve body and actuator allow for
easy inspection of the stem seal tightness. Actuated valves are delivered NC (normally closed) and are easily rebuilt
to NO (normally open). The stainless steel handle for manual operation mechanically locks the valve in open or
closed position. The valve is assembled with screws for easy inspection and maintenance.
68 2008/11
2. Valves
Sanitary valves / Shut off valves
SBR
Valves
Description Denomination A B Part No.
SRB
2.1.8 Accessories
2.1.8.1 Actuators
Valves
LKLA
70 2008/11
2. Valves
Sanitary valves / Accessories
LKLA (Continued)
Valves
Without coupling (NC) LKLA-85-NC 165 85 - 17 6-9611 41 6300
Actuators Ø85 and Ø133 for
LKB, LKB-2 and LKB-F valves LKLA-133-NC 282 133 - 30 6-9612 27 1301
Funktion: Normally closed (NC)
72 2008/11
2. Valves
Sanitary valves / Accessories
2.1.8.2 Handles
Valves
Description Denomination S K R T Part No.
Lockable Multiposition, Multi 8mm ISO25-63.5 DIN25-50 short 8 150 52 22 6-9612 59 2804
short
Handles for LKB, LKB-2 and Multi 10mm ISO76.1 DIN65-80 short 10 150 52 30 6-9612 59 2805
LKB-F valves
Multi 12mm ISO101.6 DIN100 short 12 150 52 30 6-9612 59 2806
Mounting bracket with 1.1 LKB 25-63.5 8 96.5 147.5 6-9612 04 7501
handle and indicator unit
- 1.1 LKB 65 10 108.0 192.5 6-9612 04 7504
Mounting brackets for actuator LKLA 85 LKB 25-63.5 85 75.5 58.5 6-9611 41 6470
LKLA Ø85 and Ø133
- LKLA 85 LKB 65 85 75.5 58.5 6-9612 08 1502
74 2008/11
2. Valves
Sanitary valves / Control/Indication
2.1.9 Control/Indication
Valves
Indi Top
The indication unit IndiTop is designed as a simple and easy to use, electrical feedback unit for Alfa Laval sanitary
valves. It is compatible with all major PLC (Programmable Logic Controller) digital input cards. It is for use in food,
dairy and brewery installations and in biopharmaceutical applications. The unit is mounted on the valve actuator
“mushrooms” with two Allen screws and on the valve stem. Once setup either by the quick and easy “5 push
setup” or remotely from the PLC, the unit will be able to send feedback about the valve position through a fixed
cable.
Sensor System
IndiTop is a unique “No Touch” sensor system without any mechanical adjustments. A magnet is mounted on the
valve stem and the magnetic field (axial) is detected by sensor chips inside the sensor unit. The measuring angle
from each chip is used to locate the current position of the valve stem with an accuracy of ± 1mm. Note that the
distance to the magnet can be 5 mm ± 3 mm.
Feedback Signals
IndiTop is capable of providing two 2 PNP/NPN digital feedback signals in both DC and AC.
Selection of PNP or NPN is done by wiring.
Visual indication through LEDs are constantly displaying the current valve position and power (ON/OFF)
Features
• Works with both DC and AC supply voltage (8-30V DC/AC)
• Two PNP/NPN digital DC/AC feedback signals
• Keeps the setup during power downs
• Visual indication through LEDs
• 0.5m with M12-5 contact or 5m respectively 10m lose end cable
ThinkTop Basic
The ThinkTop® Basic is designed to ensure optimum valve control in conjunction with Alfa Laval sanitary valves and
it is compatible with all major PLC systems (Programmable Logic Controller) with a digital PNP/NPN interface. It is
for use in food, dairy and brewery installations and in biopharmaceutical applications. The ThinkTop® Basic fits all
air operated valves from Alfa Laval.
The ThinkTop® Basic is a basic control head including sensor unit and solenoid valves to control processing valves.
It is used to control and supervise pneumatic valves and is mounted on top of the valve. It receives signals from a
PLC to control the solenoid valve and it sends the valve status feedback signals back to the PLC. To adapt the
sensor unit to the specific valve, the users make a simple set-up by using local keys.
Sensor System
The sensor system is the well known and approved “No Touch” principle from the ThinkTop® platform without any
mechanical sensor adjustments.
A magnet is mounted on the valve stem and the magnetic field (axial) is detected by build in sensor chips inside the
sensor unit. The measuring angle from each chip is used in calculations to locate the current position of the valve
stem. There can be programmed 2 PNP or 2 NPN feedback signals. The selection of PNP or NPN is done by a
jumper on the sensor board itself. The LEDs are constantly indicating the status of the unit: Valve position,
solenoids activated, set-up and local fault indication.
ThinkTop
The ThinkTop® is designed to ensure optimum valve control in conjunction with Alfa Laval sanitary valves and it is
compatible with all major PLC systems (Programmable Logic Controller with PNP/NPN interface). It is for use in
nals from a PLC to control the valve and it sends feedback signals to the PLC to indicate when the valve is in a cer-
tain position.
To adapt the sensor unit to the specific valve and to the application, the user sets up the ThinkTop® either by the
local keys or by using the key pad (which is ordered separately). When using the key pad it is not necessary to dis-
mantle the top unit.
Sensor System
Unique “No Touch” sensor system without any mechanical sensor adjustments. A magnet is mounted on the valve
stem and the magnetic field (axial) is detected by sensor chips inside the sensor unit. The measuring angle from
each chip is used to locate the current position of the valve stem with an accuracy of ± 0.1mm. The sensor system
can be used for 4 feedback signals + 1 status signal = 5 digital PNP/NPN feedback signals. Selection of PNP or
NPN is done by a jumper. 2 of the feedback signals can be external sensors if necessary.
76 2008/11
2. Valves
Sanitary valves / Control/Indication
IndiTop
Valves
Description Denomination A B Part No.
Ext. air
Supply Valve
Description Denomination tube Part No.
solenoids type
connection
Think Top Basic Think Top Basic 10-30VDC PNP/NPN - - - 6-9613 41 9801
For valves:
Unique SSV (Except Unique SSV- Think Top Basic 10-30VDC PNP/NPN 1sol 3/2 Ø6 mm 24 VDC 3/2 6-9613 41 9802
LS), Unique SSV Aseptic, Unique
Mixproof, SMP-BC, SMP-SC, LKLA-T Think Top Basic 10-30VDC PNP/NPN 2sol 3/2 Ø6 mm 24 VDC 3/2 6-9613 41 9803
(LKB), Koltek MH, SBV
Think Top Basic 10-30VDC PNP/NPN 3sol 3/2 Ø6 mm 24 VDC 3/2 6-9613 41 9804
Think Top Basic 10-30VDC PNP/NPN 1sol 5/2 Ø6 mm 24 VDC 5/2 6-9613 41 9805
Think Top Basic 10-30VDC PNP/NPN 1sol 3/2 1/4" 24 VDC 3/2 6-9613 41 9852
Think Top Basic 10-30VDC PNP/NPN 2sol 3/2 1/4" 24 VDC 3/2 6-9613 41 9853
Think Top Basic 10-30VDC PNP/NPN 3sol 3/2 1/4" 24 VDC 3/2 6-9613 41 9854
Think Top Basic 10-30VDC PNP/NPN 1sol 5/2 1/4" 24 VDC 5/2 6-9613 41 9855
ThinkTop
ThinkTop Digital Think Top PNP/NPN 8-30VDC 0xsol 6mm - - 6-9612 57 8901
For valves:
Unique SSV, Unique SSV-LS, Think Top PNP/NPN 8-30VDC 1xsol 24VDC 6m Ø6 mm 3/2 6-9612 57 8902
Unique SSV Aseptic, Unique
Mixproof, SMP-BC, SMP-SC, Think Top PNP/NPN 8-30VDC 2xsol 24VDC 6m Ø6 mm 3/2 6-9612 57 8903
LKLA-T (LKB), Koltek MH, SBV
Think Top PNP/NPN 8-30VDC 3xsol 24VDC 6m Ø6 mm 3/2 6-9612 57 8904
Think Top PNP/NPN 8-30VDC 1xsol 24VDC 1/ 1/4" 3/2 6-9612 57 8952
Think Top PNP/NPN 8-30VDC 2xsol 24VDC 1/ 1/4" 3/2 6-9612 57 8953
Think Top PNP/NPN 8-30VDC 3xsol 24VDC 1/ 1/4" 3/2 6-9612 57 8954
Think Top PNP/NPN 8-30VDC 1xsol 24VDC 1/ 1/4" 5/2 6-9612 57 8955
THinkTop AS-Interface 29.5 - Think Top AS 29.5-31.6VDC 0xsol 6mm - - 6-9612 61 5501
31.6
For valves: Unique SSV, Unique Think Top AS 29.5-31.6VDC 1xsol 24VDC 6m Ø6 mm 3/2 6-9612 61 5502
SSV-LS, Unique SSV Aseptic,
Unique Mixproof, SMP-BC, Think Top AS 29.5-31.6VDC 2xsol 24VDC 6m Ø6 mm 3/2 6-9612 61 5503
SMP-SC, LKLA-T (LKB), Koltek
MH, SBV Think Top AS 29.5-31.6VDC 3xsol 24VDC 6m Ø6 mm 3/2 6-9612 61 5504
Think Top AS 29.5-31.6VDC 1x24V 1/4 3/2 1/4" 3/2 6-9612 61 5552
Think Top AS 29.5-31.6VDC 2x24V 1/4 3/2 1/4" 3/2 6-9612 61 5553
Think Top AS 29.5-31.6VDC 3x24V 1/4 3/2 1/4" 3/2 6-9612 61 5554
Think Top AS 29.5-31.6VDC 1x24V 1/4 5/2 1/4" 5/2 6-9612 61 5555
ThinkTop DeviceNet 11-25 Think Top DN 11-25VDC 0xsol 6mm - - 6-9612 63 9601
VDC
For valves: Think Top DN 11-25VDC 1xsol 8VDC 6mm 3/2 Ø6 mm 3/2 6-9612 63 9602
Unique SSV, Unique SSV-LS,
Unique SSV Aseptic, Unique Think Top DN 11-25VDC 2xsol 8VDC 6mm 3/2 Ø6 mm 3/2 6-9612 63 9603
Mixproof, SMP-BC, SMP-SC,
LKLA-T (LKB), Koltek MH, SBV Think Top DN 11-25VDC 3xsol 8VDC 6mm 3/2 Ø6 mm 3/2 6-9612 63 9604
Think Top DN 11-25VDC 1xsol 8VDC 6mm 5/2 Ø6 mm 5/2 6-9612 63 9605
Think Top DN 11-25VDC 1xsol 8VDC 1/4 3/2 1/4" 3/2 6-9612 63 9652
Think Top DN 11-25VDC 2xsol 8VDC 1/4 3/2 1/4" 3/2 6-9612 63 9653
Think Top DN 11-25VDC 3xsol 8VDC 1/4 3/2 1/4" 3/2 6-9612 63 9654
Think Top DN 11-25VDC 1xsol 8VDC 1/4 5/2 1/4" 5/2 6-9612 63 9655
78 2008/11
2. Valves
Sanitary valves / Control/Indication
Switches
Valves
These indication units have to be installed laterally between the air operated actuator and the valve.
The pull-up or pull-down resistance in the input stage of the PLC must be 1-10 k ohms to ensure a proper reading
of the signal from the sensors. The wire connection can be different.
Micro switch
A micro switch can be compared with a standard light switch but in a very small size and light in weight, a so called
subminature switch. It is activated mechanically by a roller leaf. Standard function is normally open (NO), normally
closed (NC) and is always a digital signal (on/off). The features of an environment proof sealed subminature switch
are: Small size and light in weight, with ample electrical capacity, precision operation and long life. The micro switch
used in indication units is furthermore enclosed within a corrosion-resistant aluminium housing to seal the switch
contact and terminals against contamination.
Position
Valves
Micro switch unit with one switch 1xMS Lower SRC/ARC/ARC-SB 38-65 L L 6-9612 52 2805
Type: NO/NC
On/off signal 1xMS Upper SRC/ARC/ARC-SB 38-65 U U 6-9612 52 2804
24-55 VDC/VAC
Min load: 100mA 1xMS Lower SRC/ARC 76.1-101.6 L L 6-9612 52 2905
Max load: 1A
1xMS Upper SRC/ARC 76.1-101.6 U U 6-9612 52 2904
Micro switch unit with two switches 2xMS Upper/Lower SRC/ARC/ARC-SB 38-65 L/U All types 6-9612 52 2806
Type: NO/NC
On/off signal 2MS Upper/Lower SRC/ARC 76.1-101.6 L/U L/U 6-9612 52 2906
24-55 VDC/VAC
Min load: 100mA
Max load: 1A
Inductive prox. switch unit, PNP/NPN 2-w. SRC/ARC 38-65. - - 6-9612 51 9009
PNP/NPN (2 wire)
Type: PNP/NPN PNP/NPN 2-w. SRC 38-65 Stop L/U Stop valve 6-9612 51 9007
10-110 VDC/20-110 VAC
Min load 4mA PNP/NPN 2 -w. SRC/ARC 76.1-102 L/U All types 6-9612 51 9008
Max load 150mA
Hall prox. switch unit (green) Hall PNP unit 5-24VDC SRC/ARC 38-63.5 - - 6-9612 52 0507
Max load: 15mA
Hall PNP unit 5-24VDC SRC/ARC 63.5-101.6 - - 6-9612 52 0510
Hall prox. switch unit (yellow) Hall NPN unit 5-24VDC SRC/ARC 38-63.5 - - 6-9612 54 1807
Max load: 10mA
Hall NPN unit 5-24VDC SRC/ARC 63.5-101.6 - - 6-9612 54 1810
Hall prox. switch unit (grey) Hall PNP unit 20-30VDC SRC/ARC 38-63.5 - - 6-9612 54 1907
Max load: 15mA
Hall PNP unit 20-30VDC SRC/ARC 76-101.6 - - 6-9612 54 1910
80 2008/11
2. Valves
Sanitary valves / Control/Indication
Valves
Description Denomination Part No.
Micro switch unit for LKLA Ø85 MS LKB-/LKLA85 25-101.6 6-9612 51 0702
For LKLA (LKB) Ø85/Handle 1.1
24-55 VDC/VAC
Min load: 100mA
Max load: 1A
Signal output: On/off, digital
Hall prox. switch unit for LKLA Ø85 (yellow) Hall NPN 5-24VDC LKB-/LKLA85 25-101.6 6-9612 51 0611
For LKLA (LKB) Ø85/Handle 1.1
Max load: 10mA Hall NPN 5-24VDC LKB-/LKLA85 125-150 6-9612 51 0612
Signal output: On/off, digital
Hall prox. switch unit for LKLA Ø85 (green) Hall PNP 5-24VDC LKB-/LKLA85 25-101.6 6-9612 51 0615
For LKLA (LKB) Ø85/Handle 1.1
Max load: 15mA Hall PNP 5-24VDC LKB-/LKLA85 125-150 6-9612 51 0616
Signal output: On/off, digital
Hall prox. switch unit for LKLA Ø85 (grey) Hall PNP 20-30VDC LKB-/LKLA85 25-101.6 6-9612 51 0613
For LKLA (LKB) Ø85/Handle 1.1
Max load: 15mA Hall PNP 20-30VDC LKB-/LKLA85 125-150 6-9612 51 0614
Signal output: On/off, digital
Micro switch unit for LKLA Ø133 MS LKB-/LKLA133 100-150 6-9612 51 0902
For LKLA (LKB) Ø133/Handle 1.1
24-55 VDC/VAC
Min load: 100mA
Max load: 1A
Signal output: On/off, digital
Hall prox. switch unit for LKLA Ø133 (yellow) Hall NPN 5-24VDC LKB-/LKLA133 100-150 6-9612 51 0807
Max load: 10mA
Signal output: On/off, digital
Hall prox. switch unit for LKLA Ø133 (green) Hall PNP 5-24VDC LKB-/LKLA133 100-150 6-9612 51 0806
For LKLA (LKB) Ø133
Max load: 15mA
Signal output: On/off, digital
Hall prox. switch unit for LKLA Ø133 (grey) Hall PNP 20-30VDC LKB-/LKLA133 100-150 6-9612 51 0805
For LKLA (LKB) Ø133
Max load: 15mA
Signal output: On/off, digital
82 2008/11
2. Valves
Sanitary valves / Plug cocks
LKTH
Valves
The stainless steel plug cock is used in the food and chemical industries and in other installations where a
hygienically finished closing device with minimum pressure drop is required. The plug cock is made of stainless
steel AISI 304. The plug cock is designed for quick and easy operation. The plug is fitted with O-rings ensuring
that no leakage occurs even if the screw cap is only partly tightened. The plug cock is available with male parts
according to optional standards and also with liners, seal rings and nuts.On the three-way cocks the plug handle is
positioned according to the appropriate standard, where applicable, otherwise as shown in the handle position.
LKTH - Inch
LKTH with 3 male ends, SMS LKTH-SMS25-3way-AISI 304 140 110 110 6-260112 01
Manually operated plug cock
Connection: SMS LKTH-SMS38-3way-AISI 304 160 140 110 6-260112 02
Material: 1.4301 (304)
LKTH-SMS51-3way-AISI 304 180 164 110 6-260112 03
LKTH - DIN
LKTH with 3 male ends, DIN LKTH-DIN25-3way-AISI 304 140 120 110 6-9611 10 0521
Manually operated plug cock
Connection: DIN LKTH-DIN40-3way-AISI 304 160 160 110 6-9611 10 0523
Material: 1.4301 (304)
LKTH-DIN50-3way-AISI 304 180 170 110 6-9611 10 0524
Flow controller
Valves
Flow controller type B BA00 0.8-2m3/h SMS51 AISI304 249 90 360 51 51 7.6 6-32247 0292 1
Material: AISI 304
Connection: SMS BA01 1.5-3.6.0m3/h SMS51 AISI304 249 90 360 51 51 7.6 6-32247 0293 1
BA03 6-10.5m3/h SMS51/63.5 AISI304 249 90 360 51 63.5 8.0 6-32247 0295 1
BA10 10-22m3/h SMS63.5/76 AISI304 283 114 438 63.5 76 15.9 6-32247 0273 1
BA20 22-35m3/h SMS63.5/76 AISI304 283 114 438 63.5 76 15.9 6-32247 0271 1
84 2008/11
2. Valves
Non-sanitary valves / Flow regulators
In this category of plant components you find non-sanitary valves for different media
Valves
applications, like water and steam etc.
Seat valves are mainly used for automatic shut-off in water and steam applications.
Ball valves are commonly used for manual shut-off of flow in water and steam applications.
Angle seat control valves are used for regulating water and media.
Globe control valves are mainly used for regulating steam.
Application
The valves are typical used as flow restrictors of water for flushed pump seals or for vacuum pumps.
Flow restrictor
86 2008/11
2. Valves
Non-sanitary valves / Non-return valves
LCV-1
Valves
The LCV1 is a bronze lift check valve that shall be installed in horizontal pipe to prevent reverse flow.
DCV3
Application
The DCV3 is a compact check valve that prevent reverse flow.
Benefits
• DCV3 fits between flanges
• Austenitic stainless steel body for aggressive fluids, vapour, acids and alkalines
• Compact design compared to a sving check valve
LCV-1
A D
LCV-1 LCV-1-DN15-G1/2" -ISO228/1 53 46 18 36 0.2 90503-7792
Connection: BSP threaded
Material body: Bronze LCV-1-DN20-G3/4''-ISO228/1 71 58 20 41 0.5 6-31801 5047 1
B
Max allowable pressure: 14 bar
C
Max allowable temperature: 260ºC LCV-1-DN25-G1''-ISO228/1 86 71 28 56 0.8 6-31801 5047 2
LCV1
LCV-1-DN32-G1 1/4''-ISO228/1 86 71 28 56 0.8 6-31801 5047 3
DCV3
DCV3 DCV3 DN15 PN40 SS 4.4 60.0 43.0 38.0 16.0 0.11 90503-8135
Connection: Between flanges
Material body: 1.4581 DCV3 DN25 PN40 SS 10.8 80.5 63.0 55.0 22.0 0.28 90503-4096
Material disc: SS or SS/Viton
Max pressure: 40 bar DCV3 DN40 PN40 SS 26.0 101.0 85.0 79.0 31.5 0.64 90503-4098
Max temperature: 250ºC
DCV3 DN40 PN40 SS/Viton 26.0 101.0 85.0 79.0 31.5 0.64 90503-4097
DCV3 DN50 PN40 SS 43.0 115.0 95.0 93.0 40.0 1.11 90503-4099
DCV3 DN50 PN40 SS/Viton 43.0 115.0 95.0 93.0 40.0 1.11 90503-4100
The Type 39-2 Steam Pressure Reducing Valve regulates the steam pressure downstream from the valve to a
pre-adjusted set point value.
88 2008/11
2. Valves
Non-sanitary valves / Reducing valves
39-2
Valves
Description Denomination Bar Kv H L L1 ØD Part No.
For steam 39-2 DN15 Flange DIN2533 GG-25 0.2-1.2 3.2 410 130 220 285 6-31801 2294 2
Connection: Flange EN 1092
Material: GG-25 39-2 DN20 Flange DIN2533 GG-25 2.0-5.0 5.0 390 150 256 170 6-31801 2294 4
39-2 DN32 Flange DIN2533 GG-25 2.0-5.0 12.5 445 180 314 170 6-31801 2294 1
39-2 DN40 Flange DIN2533 GG-25 2.0-5.0 20.0 445 200 337 170 6-31801 2294 3
39-2 DN50 Flange DIN2533 GG-25 2.0-5.0 32.0 445 230 380 170 6-31801 2294 5
DRV7
For steam DRV7 DN65 Flange PN16 EN1092 GGG-40.3 2.0-5.0 58 290 522 168 187 90503-7783
Connection: Flange EN 1092
Material body: SG iron/GGG 40.3 DRV7 DN80 Flange PN16 EN1092 GGG-40.3 2.0-5.0 92 310 528 168 202 90503-7784
Max temp: 300ºC
DRV7 DN100 Flange PN16 EN1092 GGG-40.3 2.0-5.0 145 350 633 168 237 90503-7785
DP27
Valves
For steam and compr. air DP27 1" BSP GGG-40.3 0.2-17 8.1 180 207 420 148 90503-7776
Connection: BSP thread
Material body: SG iron DP27 1/2" BSP GGG-40.3 0.2-17 2.8 160 185 406 130 90503-7774
Max temp: 232ºC
DP27 3/4" BSP GGG-40.3 0.2-17 5.5 160 185 406 130 90503-7775
For steam and compr. air DP27 DN15 Flange EN1092 GGG-40.3 0.2-17 2.8 130 185 406 130 90503-7777
Connection: Flange EN 1092
Material body: SG iron DP27 DN20 Flange EN1092 GGG-40.3 0.2-17 5.5 150 185 406 130 90503-7778
Max temp: 232ºC
DP27 DN25 Flange EN1092 GGG-40.3 0.2-17 8.1 160 207 420 148 90503-7779
DP27 DN32 Flange EN1092 GGG-40.3 0.2-17 12.0 180 207 420 148 90503-7780
DP27 DN40 Flange EN1092 GGG-40.3 0.2-17 17.0 200 255 475 178 90503-7781
DP27 DN50 Flange EN1092 GGG-40.3 0.2-17 28.0 230 255 475 178 90503-7782
90 2008/11
2. Valves
Non-sanitary valves / Reducing valves
BRV2
Valves
Description Denomination Bar Kv A C D E Part No.
Steam and compr. air reducing valve BRV2S DN15 ISO7/1-Rp1/2 GGG-40.3 1.4-4.0 1.5 83 60 130 25 90503-8198
Material: SG-Iron, GGG-40.3
E Connection: Threaded, ISO 7/1-RP BRV2S DN20 ISO7/1-Rp3/4 GGG-40.3 0.14-1.7 2.5 96 60 130 25 6-31801 1768 1
Max temp: 210ºC
BRV2S DN20 ISO7/1-Rp3/4 GGG-40.3 1.4-4.0 2.5 96 60 130 25 6-31801 1768 2
A
BRV2
LRV2
For liquid appl. LRV2 DN15 ISO7/1-Rp1/2 Brass 0.35-1.7 2.1 83 62 130 32 25 40 6-31801 9097 1
Material body: Red Brass
E Connection: Threaded, ISO 7/1-RP LRV2 DN15 ISO7/1-Rp1/2 Brass 1.4-4.0 2.1 83 62 130 32 25 40 6-31801 9097 4
Max temp: 75ºC
LRV2 DN20 ISO7/1-Rp3/4 Brass 0.35-1.7 3.6 96 62 130 32 25 40 6-31801 9097 2
LRV2 DN25 ISO7/1-Rp1 Brass 0.35-1.7 4.3 108 62 130 32 25 40 6-31801 9097 3
C
LRV2 DN25 ISO7/1-Rp1 Brass 1.4-4.0 4.3 108 62 130 32 25 40 6-31801 9097 6
D F
A
LRV2
SRV2
Valves
For steam and compr. air reducing valve SRV2 DN20 ISO228/1-G3/4" SS 0.14-1.7 2.5 96 62 130 25 15 6-31801 9334 1
E1 Material body: 1.4404 (316L)
Connection: BSP or NPT SRV2 DN20 ISO228/1-G3/4" SS 1.4-4 2.5 96 62 130 25 15 6-31801 9334 2
Max temp: 210ºC
SRV2 DN20 ISO228/1-G3/4" SS 3.5-8.6 2.5 96 62 130 25 15 6-31801 9334 3
E2
A
SRV2
92 2008/11
2. Valves
Non-sanitary valves / Regulating valves
Regulating valves
Valves
Application
The regulating valves are intended for different media applications such as:
- Cold and hot water
- Air and neutral gases
- Steam
94 2008/11
2. Valves
Non-sanitary valves / Regulating valves
TA
Valves
Description Denomination DN Kv D H L Kg Part No.
TA-STAD TA-STAD Man DN10BSP Kvs=1.47 10 1.47 3/8 100 83 - 6-31801 5367 1
With measuring points
Body material: Ametal (gun metal) TA-STAD Man DN15BSP Kvs=2.52 15 2.52 1/2 100 90 - 6-31801 5367 2
Seal: EPDM
Pressure class: PN20 TA-STAD Man DN20BSP Kvs=5.7 20 5.70 3/4 100 97 - 6-31801 5367 3
Connection: G threads
TA-STAD Man DN25BSP Kvs=8.7 25 8.70 1 105 100 - 6-31801 5367 4
TA-STAD Man DN32BSP Kvs=14.2 32 14.2 1 1/4 110 124 - 6-31801 5367 5
TA-STAD Man DN40BSP Kvs=19.2 40 19.2 1 1/2 120 130 - 6-31801 5367 6
TA-STAF TA-STAF Man DN65FL Kvs=85 65 85 185 205 290 12.4 6-31801 5368 1
With measuring points
Body material: Cast iron (GG 25) TA-STAF Man DN80FL Kvs=120 80 120 200 220 310 15.9 6-31801 5368 2
Seal: EPDM
Pressure class: PN16 TA-STAF DN100FL Kvs=190 100 190 220 240 350 22.0 6-31801 5368 3
Connection: PN16 flanges
TA-STAF DN125FL Kvs=300 125 300 250 275 400 32.7 6-31801 5368 4
TA-STAF DN150FL Kvs=420 150 420 285 285 480 42.4 6-31801 5368 5
3241
Max
Description Denomination DN Kv Bar Diff L H tot Kg Part No.
Press
3241/3277 FL DIN NC SS/SS 241-7/3277-3767 240cm2 GG DN15 4.0 0.2-1.0 28.0 130 532 14 6-31801 5971 1
Normally Closed (NC)
Flange: DIN PN16 241-7/3277-3767 240cm2 GG DN25 6.3 0.2-1.0 5.2 160 532 16 6-31801 5971 2
ØD
H3 a Material housing: GG-25
Actuator:3277 240/350/ 241-7/3277-3767 240cm2 GG DN25 10.0 0.2-1.0 5.2 160 532 16 6-31801 5971 3
700cm2
H Positioner: 3767/3760 4-20mA 241-7/3277-3767 240cm2 GG DN40 16.0 0.3-1.1 5.2P 200 564 21 6-31801 5971 4
IP54
100 Including pressure gauge
241-7/3277-3767 240cm2 GG DN40 25.0 0.4-2.0 5.0 200 564 21 6-31801 5971 5
a2
241-7/3277-3767 350cm2 GG DN50 35.0 0.4-2.0 5.0 230 587 27 6-31801 5971 6
H1
241-7/3277-3767 350cm2 GG DN65 63.0 0.8-2.4 6.5P 290 653 36 6-31801 5971 7
H2 241-7/3277-3767 350cm2 GG DN80 80.0 1.2-3.6 6.5P 310 653 42 6-31801 5971 8
L 241-7/3277-3767 700cm2 GG DN100 160 0.8-2.4 5.5P 350 957 68 6-31801 5971 9
3241 (Continued)
Max
Description Denomination DN Kv Bar Diff L H tot Kg Part No.
Valves
Press
3241/3277 FL DIN NC SS/ 241-7/3277-3760 350cm2 GG DN65 60.0 0.8-2.4 40P 290 653 36 6-31801 9424 1
PTFE
Normally Closed (NC) 241-7/3277-3760 350cm2 GG DN80 80.0 1.2-3.6 40P 310 653 42 6-31801 9424 2
ØD
H3 a Flange: DIN PN16
Material housing: GG-25 241-7/3277-3767 700cm2 GG DN100 160.0 0.8-2.4 38P 350 957 68 6-31801 9424 3
Actuator: 3277 350/700cm2
H Positioner: 3760/3767 4-20mA
IP54
100 Material seat/plug: SS/PTFE
a2
H1
H2
3241/3277 FL DIN NC SS/SS 241-7/3277-3760 120cm2 GS-C25 DN15 4.0 0.2-1.0 40.0 130 532 14 6-31801 9684 1
air red
Normally Closed (NC) 241-7/3277-3760 240cm2 GS-C25 DN20 6.3 0.4-2.0 14.8 150 532 15 6-31801 9684 2
ØD
H3 a Including air reducing station
Flange: DIN PN40 241-7/3277-3760 240cm2 GS-C25 DN25 10.0 0.4-2.0 14.8 160 532 16 6-31801 9684 3
Material housing:GS-C25
H Actuator: 3277 120/240/350/ 241-7/3277-3760 240cm2 GS-C25 DN32 16.0 0.6-3.0 14.0 180 564 20 6-31801 9684 4
700cm2
100 Positioner: 3760/3767 4-20mA
241-7/3277-3760 350cm2 GS-C25 DN40 25.0 0.6-3.0 14.0 200 564 21 6-31801 9684 5
IP65
a2 incl gauge
241-7/3277-3760 350cm2 GS-C25 DN50 35.0 0.8-2.4 12.0 230 587 27 6-31801 9684 6
H1
241-7/3277-3760 350cm2 GS-C25 DN65 60.0 1.4-2.3 13.0 290 653 36 6-31801 9684 7
H2 241-7/3277-3760 350cm2 GS-C25 DN80 80.0 2.1-3.3 12.0 310 653 42 6-31801 9684 8
L 241-7/3277-3767 700cm2 GS-C25 DN100 160.0 2.1-3.3 15.5 350 957 68 6-31801 9685 1
241-7/3277-3767 700cm2 GS-C25 DN125 200.0 2.1-3.3 13.0 400 993 106 6-31801 9685 2
96 2008/11
2. Valves
Non-sanitary valves / Regulating valves
3244
Max
Valves
Description Denomination DN Kv Bar Diff L H tot Kg Part No.
Press
3244-7/3277 FL DIN SS/SS 3244-7/3277-3760 120cm2 GG DIN DN25 4.0 0.4-2.0 5.2 160 765 11.2 6-31801 9688 1
ØD
mixNC
H3 a
3-way mixing valve, 3244-7/3277-3760 120cm2 GG DIN DN25 6.3 0.4-2.0 5.2 160 765 11.2 6-31801 9688 2
MixNC,port B(bottom)NC
H
Including air reducing 3244-7/3277-3760 120cm2 GG DIN DN25 10.0 0.4-2.0 5.2 160 765 11.2 6-31801 9688 3
station
100
Flange: DIN PN16 3244-7/3277-3760 350cm2 GG DIN DN32 16.0 0.2-1.0 5.0 180 810 25 6-31801 9688 4
a2
Material housing:GG-25
Actuator: 3277 Mix.NC 120/
H1 3244-7/3277-3760 350cm2 GG DIN DN40 25.0 0.4-1.2 8.7P 200 815 27 6-31801 9688 5
350/700cm2
Positioner: 3760 4-20mA
IP65 3244-7/3277-3760 350cm2 GG DIN DN50 35.0 0.4-1.2 5.1 230 830 29 6-31801 9688 6
H2
incl gauge
3244-7/3277-3760 350cm2 GG DIN DN65 60.0 0.8-2.4 6.7P 290 875 43 6-31801 9688 7
L
3244-7/3277-3760 350cm2 GG DIN DN80 80.0 1.2-3.6 7.5P 310 885 49 6-31801 9688 8
3244-7/3277-3767 700cm2 GG DIN DN100 160.0 0.8-2.4 5.6 350 1163 75 6-31801 9689 1
3244-7/3277-3767 700cm2 GG DIN DN150 300.0 1.2-3.6 5.1 480 1238 161 6-31801 9689 3
3244-7/3277 FL DIN SS/SS 3244-7/3277-3760 120cm2 GG DIN DN25 4.0 0.4-2.0 5.2 160 765 11.2 6-31801 9690 1
ØD
mixNO
H3 a
3-way mixing valve, 3244-7/3277-3760 120cm2 GG DIN DN25 6.3 0.4-2.0 5.2 160 765 11.2 6-31801 9690 2
MixNO,port A(side)NC
H
Including air reducing 3244-7/3277-3760 120cm2 GG DIN DN25 10.0 0.4-2.0 5.2 160 765 11.2 6-31801 9690 3
100
station
Flange: DIN PN16 3244-7/3277-3760 350cm2 GG DIN DN32 16.0 0.2-1.0 5.2 180 810 25 6-31801 9690 4
a2
Material housing:GG-25
Actuator: 3277 Mix.NO 120/
H1 3244-7/3277-3760 350cm2 GG DIN DN40 25.0 0.4-1.2 8.7 200 815 27 6-31801 9690 5
350/700cm2
Positioner: 3760 4-20mA
IP65 3244-7/3277-3760 350cm2 GG DIN DN50 35.0 0.4-1.2 5.1 230 830 29 6-31801 9690 6
H2
incl and gauge
3244-7/3277-3760 350cm2 GG DIN DN65 60.0 0.8-2.4 6.7 290 875 43 6-31801 9690 7
L
3244-7/3277-3760 350cm2 GG DIN DN80 80.0 1.2-3.6 7.5 310 885 49 6-31801 9690 8
3244-7/3277-3767 700cm2 GG DIN DN100 160.0 0.8-2.4 5.6 350 1163 75 6-31801 9691 1
3244-7/3277-3767 700cm2 GG DIN DN150 200.0 1.2-3.6 7.2 480 1238 161 6-31801 9691 2
3244-7/3277-3767 700cm2 GG DIN DN150 300.0 1.2-3.6 5.1 480 1238 161 6-31801 9691 3
3321
Max
Valves
H
Description Denomination DN Kv Bar Diff L Kg Part No.
tot
Press
98 2008/11
2. Valves
Non-sanitary valves / Regulating valves
3321 (Continued)
Max
H
Description Denomination DN Kv Bar Diff L Kg Part No.
tot
Valves
Press
3321/3372 FL DIN NC 3321/3372 120cm2 GG DN15 4.0 2.1-3.3 40.0 130 496 8.3 6-31801 9423 1
SS/SS
Ø168 H3 Normally Closed (NC) 3321/3372 120cm2 GG DN20 6.3 2.1-3.3 40.0 150 496 9.3 6-31801 9423 2
Flange: DIN PN16
Material housing: GG-25 3321/3372 120cm2 GG DN25 10.0 2.1-3.3 40.0 160 496 10.3 6-31801 9423 3
Actuator: 3372 I/P
PG 11 120cm2 3321/3372 120cm2 GG DN32 16.0 2.1-3.3 25.0 180 533 14.3 6-31801 9423 4
Including pressure gauge
3321/3372 120cm2 GG DN40 25.0 2.1-3.3 17.0 200 533 15.3 6-31801 9423 5
H1
3321/3372 120cm2 GG DN50 35.0 2.1-3.3 10.0 230 533 18.3 6-31801 9423 6
H2
3321/3372 FL DIN NC 3321/3372 120cm2 GG DN15 4.0 2.1-3.3 40.0 130 496 8.3 6-31801 9422 1
SS/PTFE
Ø168 H3 Normally Closed (NC) 3321/3372 120cm2 GG DN20 6.3 2.1-3.3 40.0 150 496 9.3 6-31801 9422 2
Flange: DIN PN16
Material housing: GG-25 3321/3372 120cm2 GG DN25 10.0 2.1-3.3 40.0 160 496 10.3 6-31801 9422 3
Actuator: 3372 I/P
PG 11 120cm2 3321/3372 120cm2 GG DN32 16.0 2.1-3.3 27.0 180 533 14.3 6-31801 9422 4
Including pressure gauge
3321/3372 120cm2 GG DN40 25.0 2.1-3.3 19.0 200 533 15.3 6-31801 9422 5
H1
3321/3372 120cm2 GG DN50 35.0 2.1-3.3 12.0 230 533 18.3 6-31801 9422 6
H2
3321/3372 FL DIN NO 3321/3372 120cm2 GG DIN DN15 DN15 4.0 0.4-1.4 40.0 130 496 8.3 6-31801 9472 1
SS/PTFE
Ø168 H3 Normally Open (NO) 3321/3372 120cm2 GG DIN DN20 DN20 6.3 0.4-1.4 40.0 150 496 9.3 6-31801 9472 2
Flange: DIN PN16
Material housing:GG-25 3321/3372 120cm2 GG DIN DN25 DN25 10.0 0.4-1.4 40.0 160 496 10.3 6-31801 9472 3
Actuator: 3372 I/P
PG 11 120cm2 3321/3372 120cm2 GG DIN DN32 DN32 16.0 0.4-1.4 27.0 180 533 14.3 6-31801 9472 4
Including pressure gauge
3321/3372 120cm2 GG DIN DN40 DN40 25.0 0.4-1.4 19.0 200 533 15.3 6-31801 9472 5
H1
3321/3372 120cm2 GG DIN DN50 DN50 35.0 0.4-1.4 12.0 230 533 18.3 6-31801 9472 6
H2
3323
Max
Valves
H
Description Denomination DN Kv Bar Diff L Kg Part No.
tot
Press
3323/3372 FL DIN SS/SS divert 3323/3372 120cm2 GG DIN DN15 DN15 4.0 1.4-1.8 16.0 130 477 8.1 90503-7645
3-way divert valve, DivNC,port
Ø168 H3 A(side) 3323/3372 120cm2 GG DIN DN20 DN20 6.3 1.4-1.8 16.0 150 487 8.6 90503-7646
Flange: DIN 15 PN16
Material housing: GG-25 3323/3372 120cm2 GG DIN DN25 DN25 8.0 1.4-1.8 16.0 160 492 9.6 90503-7647
Actuator: 3372 120cm2
PG 11 3323/3372 120cm2 GG DIN DN32 DN32 16.0 1.4-2.1 10.0 180 511 15.3 6-31801 9648 4
3323/3372 120cm2 GG DIN DN40 DN40 20.0 1.4-2.1 10.0 200 516 15.8 6-31801 9648 5
H1
3323/3372 120cm2 GG DIN DN50 DN50 32.0 1.4-2.1 10.0 230 531 18.3 6-31801 9648 6
H2
2702 - Manual
Max
Diff
Description Denomination Kv HS LS BS ODxt Part No.
Press
(Bar)
2702 W ISO 4200 SS/PTFE Manual 2702 W25x1.2 SS/PTFE manual 10 15 - 152 - 25x1.2 90503-5663
2/2 Ways Angle seat Control valve
Connection: SMS 3008 welding 2702 W38x1.2 SS/PTFE manual 10 35 - 182 - 38x1.2 90503-5664
Body material: 316L
Seal material: PTFE 2702 W51x1.2 SS/PTFE manual 10 53 - 210 - 51x1.2 90503-5665
100 2008/11
2. Valves
Non-sanitary valves / Regulating valves
2702
Max
Valves
Diff
Description Denomination Kv HS LS BS L ODxt Part No.
Press
(Bar)
2702/1067 W ISO 4200 NC 2702/F80/1067 rem. W DN15 SS/SS 16 4.5 278 135 312 10m 21.3x1.6 90503-5621
SS/SS
2/2 Ways NC Angle seat Con- 2702/F80/1067 rem. W DN25 SS/SS 16 15 279 152 322 10m 33.7x2.0 90503-5634
trol valve, electrical control
function Side Control Remote 2702/F80/1067 rem. W DN32 SS/SS 16 23 289 - 324 10m 42.4x2.0 90503-5643
Full PID.
Connection: ISO 4200 welding 2702/G100/1067 rem. W DN40 SS/SS 12.5 35 340 182 389 10m 48.3x2.0 90503-5649
Body material: Stainless steel
316L
2702/G100/1067 rem. W DN50 SS/SS 10 53 354 210 404 10m 60.3x2.6 90503-5657
Process sealings: 316L
Actuator: 80/100 mm
2702/1067 W SMS 3008 NC 2702/F80/1067 rem. W25x1.2 SS/SS NC 10 15 279 152 330 10m 25.0x1.2 90503-5674
SS/PTFE
2/2 Ways NC Angle seat Con- 2702/G100/1067 rem. W38x1.2 SS/SS NC 10 35 340 182 400 10m 38.0x1.2 90503-5675
trol valve, electrical control
function Side Control Full PID. 2702/G100/1067 rem. W51x1.2 SS/SS NC 10 53 354 210 418 10m 51.0x1.2 90503-5676
Connection: SMS 3008 weld-
ing
Body material: Stainless steel
316L
Process sealings: 316L
Actuator: 80/100 mm
2702/1067 W SMS 3008 NO 2702/F80/1067 rem. W25x1.2 SS/SS NO 10 15 279 152 330 10m 25.0x1.2 90503-5679
SS/PTFE
2/2 Ways NO Angle seat Con- 2702/G100/1067 rem. W38x1.2 SS/SS NO 10 35 340 182 400 10m 38.0x1.2 90503-5680
trol valve, electrical control
function Side Control Full PID. 2702/G100/1067 rem. W51x1.2 SS/SS NO 10 53 354 210 418 10m 51.0x1.2 90503-5681
Connection: SMS 3008 weld-
ing
Body material: Stainless steel
316L
Process sealings: 316L
Actuator: 80/100 mm
2712
Max
Valves
Diff
Description Denomination Kv H LS E ODxt Part No.
Press
(Bar)
2712/1067 w ISO 4200 NC SS/SS 2712/F80/1067 rem. ISO DN20 SS/SS 16 7.1 379 100 101 26.9x1.6 90503-1340
2/2 Ways NC Globe seat Control
valve, electrical control function 2712/F80/1067 rem. ISO DN25 SS/SS 16 12.0 382 130 101 33.7x2.0 90503-1349
Side Control Remote Full PID.
Connection: ISO 4200 welding 2712/G100/1067 rem. ISO DN32 SS/SS 16 17.8 469 140 127 42.4x2.0 90503-1357
Body material: Stainless steel 316L
Process sealings: 316L 2712/G100/1067 rem. ISO DN40 SS/SS 16 23.8 474 150 127 48.3x2.0 90503-1364
Actuator: 80/100 mm
2712/H125/1067 rem. ISO DN50 SS/SS 16 37.0 511 175 153 60.3x2.0 90503-1373
2712/H125/1067 rem. ISO DN65 SS/SS 16 62.0 540 210 153 76.1x2.3 90503-1380
2712/L225/1067 rem. ISO DN100 SS/SS 16 140.0 626 260 261 114.3x2.6 90503-1323
2712/L225/1067 rem. ISO DN80 SS/SS 16 100.0 617 230 261 88.9x2.3 90503-1387
102 2008/11
2. Valves
Non-sanitary valves / Safety valves
Application
Valves
The valves are often used for protection of stainless steel pressure vessels.
Safety valves
Type 483 and 488 4834.7714 1.5"/2" 3.2barg 1.5" 2" 67 36 259 3.7 90503-6712
Body material: 316L
Opening pressure: 3.2 bar 4884.8044 2"/3" 3.2barg 2" 3" 152 98 426 14 90503-6718
Connection: Clamp
Lifting devise: Lever
Closed bonnet
PED approval
Application
The manual ball valve is intended for different media applications such as:
- Cold and hot water
- Air and neutral gases
- Acids and caustic solutions, etc.
- Media temperature –20 to 198ºC (3-way valve –20 to 160ºC)
Benefits
• Media temperature –20 to 198ºC (3-way valve –20 to 160ºC)
• Pressure class PN 15
• PTFE + carbon in seats (PTFE in 3-way valve)
104 2008/11
2. Valves
Non-sanitary valves / Shut off valves
Valves
Description Denomination A H L P R Part No.
DN32-Rp1 1/4"-ASTM A 105-Kvs=89 .0 64.5 66.5 106.5 83.5 174.5 6-31801 9130 5
DN65-Rp2 1/2"-ASTM A 105-Kvs=54 0.0 103 134 153.5 126.5 321.5 6-31801 9130 8
Welding, Material: AISI 316 W-DN10-AISI316-Kvs=6.0 35 33 55 50 110.5 12.5 17.1 6-31801 9128 1
Connection: Welding
Material body: AISI 316 W-DN15-AISI316-Kvs=16.3 47 38 65 64 131.5 15.8 21.3 6-31801 9128 2
Material valve ball: AISI 316
W-DN20-AISI316-Kvs=29.5 51.5 46.5 76 68 131.5 21 26.7 6-31801 9128 3
W-DN32-AISI316-Kvs=89.0 64.5 66.5 106.5 83.5 174.5 35.1 42.2 6-31801 9128 5
W-DN80-AISI316-Kvs=873.0 114 161 180 137.5 321.5 77.9 88.9 6-31801 9128 9
W-DN100-AISI316-Kvs=1390.0 137 190 217 156.5 381.5 102.3 114.3 6-31801 9129 1
W-DN32-ASTM A 105-Kvs=89.0 64.5 66.5 106.5 83.5 174.5 35.1 42.2 6-31801 9132 5
W-DN65-ASTM A 105-Kvs=540.0 103 134 153.5 126.5 321.5 62.7 73 6-31801 9132 8
W-DN80-ASTM A 105-Kvs=873.0 114 161 180 137.5 321.5 77.9 88.9 6-31801 9132 9
W-DN100-ASTM A 105-Kvs=1390.0 137 190 217 156.5 381.5 102.3 114.3 6-31801 9133 1
106 2008/11
2. Valves
Non-sanitary valves / Shut off valves
Valves
Application
The valve is intended for different media applications such as:
- Cold and hot water
- Air and neutral gases
- Steam up to 10 bar/ 180ºC
- Acids and caustic solutions, etc.
Application
The valve is intended for leak free operation in different media applications such as:
- Steam, gas
- Liquid
- Condensate, water systems
Application
The valve is intended for different media applications such as:
- Steam
- Water
- Oil
- Air
2000 - Welding
Max
Diff Act.
Description Denomination Kv HS LS BS ODxt Part No.
Press size
(Bar)
2000 W ISO 4200 NC SS/PTFE 2000 DN15 W SS PTFE NC 16 4.2 50 137 100 175 21.3x1.6 6-31801 9226 1
2/2 ways NC Angle seat ON/OFF,
electrical control function none. 2000 DN20 W SS PTFE NC 11 8.0 63 170 115 209 26.9x1.6 6-31801 9226 2
Connection: Welding ISO 4200
Body material: Stainless steel 316L 2000 DN25 W SS PTFE NC 11 19.0 63 173 130 217 33.7x2.0 6-31801 9226 3
Process sealings: PTFE
2000 DN32 W SS PTFE NC 14 27.5 80 210 145 259 42.4x2.0 6-31801 9226 4
2000 DN40 W SS PTFE NC 8 42.0 80 213 160 258 48.3x2.0 6-31801 9226 5
2000 DN40 W SS PTFE NC 14 42.0 80 213 160 258 48.3x2.0 6-31801 9226 6
2000 DN50 W SS PTFE NC 8 55.0 100 271 175 327 60.3x2.6 6-31801 9226 7
2000 DN50 W SS PTFE NC 12 55.0 100 271 175 327 60.3x2.6 6-31801 9226 8
2000 DN65 W SS PTFE NC 7 90.0 125 320 210 370 76.1x2.3 6-31801 9226 9
108 2008/11
2. Valves
Non-sanitary valves / Shut off valves
Max
Diff Act.
Description Denomination Kv HS LS BS ODxt Part No.
Valves
Press size
(Bar)
2000 W ISO 4200 NO SS/PTFE 2000 DN15 W SS PTFE NO 16 4.2 50 137 100 175 21.3x1.6 6-31801 9227 1
2/2 ways NO Angle seat ON/OFF,
electrical control function none. 2000 DN20 W SS PTFE NO 16 8.0 50 145 115 181 26.9x1.6 6-31801 9227 2
Connection: Welding ISO 4200
Body material: Stainless steel 316L 2000 DN25 W SS PTFE NO 16 19.0 63 173 130 217 33.7x2.0 6-31801 9227 3
Process sealings: PTFE
2000 DN32 W SS PTFE NO 13 27.5 63 186 145 230 52.4x2.0 6-31801 9227 4
2000 DN40 W SS PTFE NO 9 42.0 63 189 160 238 48.3x2.0 6-31801 9227 5
2000 DN40 W SS PTFE NO 16 42.0 80 213 160 258 48.3x2.0 6-31801 9227 6
2000 DN50 W SS PTFE NO 6 55.0 63 205 175 255 60.3x2.6 6-31801 9227 7
2000 DN50 W SS PTFE NO 9 55.0 80 225 175 275 60.3x2.6 6-31801 9227 8
2000 DN65 W SS PTFE NO 6 90.0 80 242 210 292 76.1x2.3 6-31801 9227 9
2000 W ASME BPE NC SS/PTFE 2000 1" W 316L/PTFE 11 19.0 63 178 152 229 25.4x1.65 90503-1596
2/2 ways NC Angle seat ON/OFF,
electrical control function none. 2000 1 1/2" W 316L/PTFE 10 38.0 80 213 182 273 38.1x1.65 90503-1597
Connection: Welding ASME BPE
Body material: Stainless steel 316L 2000 2" W 316L/PTFE 6 52.0 80 230 210 294 50.8x1.65 90503-1598
Process sealings: PTFE
2000 2" W 316L/PTFE fl.bel. 10 52.0 125 307 210 371 50.8x1.65 90503-3125
2000 - Threaded
Max
Valves
Diff Act.
Description Denomination Kv HS LS BS Part No.
Press size
(Bar)
2000* G thread NC gunmetal/PTFE 2000 G3/8 gunmetal PTFE NC 15 3.7 40 113 65 137 90503-1150
2/2 ways NC Angle seat ON/OFF,
electrical control function none. 2000 G1/2 gunmetal PTFE NC 16 3.7 40 115 85 146 90503-1152
Connection: G thread
Body material: Gunmetal 2000 G3/4 gunmetal PTFE NC 16 7.9 40 120 95 155 90503-1154
Process sealings: PTFE
*No option for position indication or
stroke limitation
2000* G thread NO gunmetal/PTFE 2000 G3/8 gunmetal PTFE NO 16 3.7 40 113 65 137 90503-1151
2/2 ways NO Angle seat ON/OFF,
electrical control function none. 2000 G1/2 gunmetal PTFE NO 16 3.7 40 115 85 146 90503-1153
Connection: G thread
Body material: Gunmetal 2000 G3/4 gunmetal PTFE NO 16 7.9 40 120 95 155 90503-1155
Process sealings: PTFE
*No option for position indication or
stroke limitation
2000 G thread NC gunmetal/PTFE 2000 G1/2" gunmetal PTFE NC 16 4.2 50 140 85 170 6-31801 9228 1
2/2 ways NC Angle seat ON/OFF,
electrical control function none. 2000 G3/4" gunmetal PTFE NC 11 8.0 50 144 95 179 6-31801 9228 2
Connection: G thread
Body material: Gunmetal 2000 G1" gunmetal PTFE NC 11 19.0 63 177 105 213 6-31801 9228 3
Process sealings: PTFE
2000 G11/4" gunmetal PTFE NC 14 27.5 80 205 120 246 6-31801 9228 4
2000 G11/2" gunmetal PTFE NC 8 42.0 80 209 130 249 6-31801 9228 5
2000 G11/2" gunmetal PTFE NC 13 42.0 100 260 130 300 6-31801 9228 6
2000 G2" gunmetal PTFE NC 8 55.0 100 272 150 317 6-31801 9228 7
2000 G2" gunmetal PTFE NC 12 55.0 125 302 150 347 6-31801 9228 8
2000 G21/2" gunmetal PTFE NC 7 90.0 125 317 185 374 6-31801 9228 9
2000 G thread NO gunmetal/PTFE 2000 G1/2" gunmetal PTFE NO 16 4.2 50 140 85 170 6-31801 9229 1
2/2 ways NO Angle seat ON/OFF,
electrical control function none. 2000 G3/4" gunmetal PTFE NO 11 8.0 50 144 195 179 6-31801 9229 2
Connection: G thread
Body material: Gunmetal 2000 G1" gunmetal PTFE NO 11 19.0 63 177 105 213 6-31801 9229 3
Process sealings: PTFE
2000 G11/4" gunmetal PTFE NO 14 27.5 63 183 120 224 6-31801 9229 4
2000 G11/2" gunmetal PTFE NO 8 42.0 63 188 130 228 6-31801 9229 5
2000 G11/2" gunmetal PTFE NO 16 42.0 80 209 130 249 6-31801 9229 6
2000 G2" gunmetal PTFE NO 8 55.0 63 204 150 249 6-31801 9229 7
2000 G2" gunmetal PTFE NO 12 55.0 80 225 150 270 6-31801 9229 8
2000 G21/2" gunmetal PTFE NO 7 90.0 80 239 185 296 6-31801 9229 9
110 2008/11
2. Valves
Non-sanitary valves / Shut off valves
2012 - Welding
Max
Valves
Diff Act.
Description Denomination Kv H LS ODxt Part No.
Press size
(Bar)
2012 W ISO 4200 NC SS/PTFE 2012 DN10 316L/PTFE 16 4.7 50 211 90 17.2x1.6 90503-1176
2/2 ways NC Globe seat ON/OFF,
electrical control function none. 2012 DN15 316L/PTFE 15 4.7 40 168 90 21.3x1.6 90503-1186
Connection: Welding ISO 4200
Body material: Stainless steel 316L 2012 DN20 316L/PTFE 11 8.1 50 213 100 26.9x1.6 90503-1196
Process sealings: PTFE
2012 DN25 316L/PTFE 11 13 63 251 130 33.7x2.0 90503-1206
BSA1
Max
Description Denomination Press Kv A B C Kg Part No.
(Bar)
Belows sealed stop valve BSA1 DN15 SS/SS PN16 16 4 130 205 125 4 90503-7765
Connection: Flange EN 1092 PN16
Max temp: 300ºC BSA1 DN20 SS/SS PN16 16 7 150 205 125 4 90503-7766
Material body: Cast iron
Material valve/seat: SS/SS BSA1 DN25 SS/SS PN16 16 12 160 217 125 5 90503-7767
Stem packing: Grafphite
BSA1 DN32 SS/SS PN16 - - - - - - 90503-8136
HV3
Max
Valves
112 2008/11
2. Valves
Non-sanitary valves / Solenoid valve
6013
Valves
Description Denomination A B C Kv Orifice Part No.
6213
6213 Solenoid valve 1/2" 6213-G1/2-24V AC/DC 2/2 way G1/2 118.5 45.0 58.0 3.6 13.0 0.78 90503-3723
Material body: Brass
Seals: NBR 6213-G1/2-24V/50-60Hz 2/2 way G1/2 118.5 45.0 58.0 3.6 13.0 0.78 90503-3724
Pressure range: 0-10 bar
Temp range: -10ºC...+100ºC 6213-G1/2-110V/50-60Hz 2/2 way G1/2 118.5 45.0 58.0 3.6 13.0 0.78 90503-3725
Connection: G 1/2"
6213-G1/2-230V/50-60Hz 2/2 way G1/2 118.5 45.0 58.0 3.6 13.0 0.78 90503-3726
6213 Solenoid valve 3/4" 6213-G3/4-24V AC/DC G3/4 138.5 66.0 80.0 9.0 20.0 1.47 90503-3727
Material body: Brass
Seals: NBR 6213-G3/4-24V/50-60Hz G3/4 138.5 66.0 80.0 9.0 20.0 1.47 90503-3728
Pressure range: 0-10 bar
Temp range: -10ºC...+100ºC 6213-G3/4-110V/50-60Hz G3/4 138.5 66.0 80.0 9.0 20.0 1.47 90503-3729
Connection: G 3/4"
6213-G3/4-230V/50-60Hz G3/4 138.5 66.0 80.0 9.0 20.0 1.47 90503-3730
114 2008/11
Select the right
components
Valves
3 Pumps
3.1 Sanitary pumps ...................................................116
3.1.1 Centrifugal pumps ............................................. 117
3.1.2 Eccentric scew pumps ....................................... 164
3.1.3 Liquid ring pumps .............................................. 166
3.1.4 Rotary Lobe Pumps ............................................ 169
Pumps
3.2 Non-sanitary pumps ...........................................173
3.2.1 Centrifugal pumps ............................................. 174
3.2.2 Diaphragm pumps ............................................. 186
3.2.3 Vacuum pumps ................................................... 189
Measuring instruments
Integration components
Automation and electrical
components
Index
3. Pumps
Sanitary pumps / Solenoid valve
The sanitary pumps supplied by Tetra Pak are used for pumping all kinds of liquid
products with different viscosities.
Low viscous liquids without air - Centrifugal pumps
Low viscous liquids containing air - Liquid-ring pumps
High viscous liquids with/without particles - Rotary lobe pumps
Pumps
116 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH
The LKH pump is a highly efficient and economical centrifugal pump which meets the requirements of sanitary and
gentle product treatment and chemical resistance. LKH is available in twelve sizes, LKH-5, -10,-15, -20, -25, -35, -40,
-45, -50, -60, -70 and -80.
The LKH pump consists of a standard motor, stub shaft, mechanical compression coupling (LKH-5 with pin bolts),
adaptor, back plate, impeller, pump casing and shaft seal. (LKH-5 has clamp connection between pump casing
and back plate). The LKH pump is designed for CIP with emphasis on large internal roundings and cleanable
seals. The sanitary version of LKH has a stainless steel shroud for protection of the motor, and the complete unit is
supported on four adjustable stainless steel legs. The LKH pump is equipped with either an external single or a
Pumps
flushed shaft seal. Both have stationary seal rings in acid resistant steel AISI 329 with sealing surface in silicon car-
bide and
rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal. The pump may also
be equipped with a double mechanical shaft seal.
SolidC
The SolidC pump is designed for standard duty applications, like pumping CIP (Cleaning In Place) solutions,
utilities, water (processing, heating, cooling), washing machines, and simple transport duty within working range.
SolidC is suited for use in the food, dairy, beverage, personal care, pharmaceutical, light chemical and water
industries. The SolidC pump consists of a standard motor, stub shaft, mechanical compression coupling, adaptor,
back plate, impeller, pump casing and shaft seal. The SolidC pump is designed for CIP with emphasis on large
internal roundings and cleanable seals.
SolidC has a stainless steel shroud for protection of the motor, and the complete unit is supported on four
adjustable legs. The SolidC pump is equipped with either an external single or a flushed shaft seal. Both have
stationary seal rings in acid-resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in
carbon. The secondary seal of the flushed seal is a long lasting lip seal.
LKH-Multistage
LKH-110 and -120/P are highly efficient and economical multistage centrifugal pumps, which meet the requirements
of sanitary and gentle product treatment and chemical resistance. Both the LKH-110 and the LKH-120/P are
available in 3 sizes, LKH-112, - 113, -114 and LKH-122/P, -123/P, -124/P respectively, for 2, 3 and 4 stages. LKH-110
and -120/P consist of a motor, stub shaft with key, mechanical compression coupling, adaptor, back plate, impellers,
pump casing, intermediate casing (3 or 4 stage), pump cover, impeller screw and shaft seal. The pumps are
designed for CIP with emphasis on large internal roundings and cleanable seals. The sanitary versions of LKH-110
and -120/P have stainless steel shrouds for protection of the motor, and the complete unit is supported on four
adjustable stainless steel legs.
2008/11 117
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP
The LKHP pump is a highly efficient and economical centrifugal pump, specially designed for high inlet pressures,
i.e. for use in filtration systems. LKHP meets the requirements of sanitary and gentle product treatment and
chemical resistance, and is available in nine sizes, LKHP-10, -15, -20, -25, -35, -40, -45, -50, -60. The LKHP pump
consists of a special motor, stub shaft, compression coupling, adaptor, back plate, impeller, pump casing and shaft
seal. The LKHP pump is designed for CIP-cleaning with emphasis on large internal roundings and easily cleanable
seals. LKHP is a sanitary pump with a stainless steel shroud for protection of the motor. The complete unit is
supported on four adjustable stainless steel legs.
Both seal types have stationary seal ring and rotating seal ring in silicon carbide. The secondary seal of the flushed
seal is a lip seal with a long lifetime.
FM-OS
Centrifugal pump FM-OS is designed for use in food, pharmaceutical, chemical and other industries where
acid-resistant steel is resistant to the products to be pumped. All product wetted parts, ie. pump casing, impeller
and pump shaft, are made of acid-resistant steel 1.4404 (316L). Screws, yoke and nuts are made of stainless steel
1.4301 (304). Seals are made of Nitrile (NBR). Mechanical single or flushed seal with stationary seal ring of
acid-resistant steel AISI 329 with sealing surface of silicon carbid and with rotating seal ring of carbon.
GM
The GM centrifugal pump is specially designed for food, chemical, pharmaceutical and other industries where acid
resistant steel is resistant to the products to be pumped.
GM-1, GM-2:
Pump casing and shaft of acid-resistant steel 1.4404 (316L). Impeller of glass fibre reinforced nylon (max. 80ºC).
Studbolts and nuts for pump casing of stainless steel 1.4301 (304). Adaptor and collets of plastic.
GM-1A, GM-2A:
As GM-1 and GM-2, but impeller of acid resistant steel 1.4404 (316L), nuts and yoke of stainless steel 1.4301 (304)
and adaptor of cast iron. Seals are made of Nitrile (NBR). Mechanical single seal with stationary seal ring of
acid-resistant steel AISI 329 with sealing surface of silicon carbide, and with rotating seal ring of carbon.
118 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-5, SMS
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
0.75/0.9kW resp. 1.1/1.3kW 74 100 125 22 183 275 242 158 125 251 308 400 207 71 232 80 125 295 389 27
1.5/1.75kW 109 100 127 22 189 275 242 158 140 269 323 409 209 71 245 90 125 305 399 30
LKH-5, SMS
2008/11 119
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-5, DIN
Pumps
0.75/0.9kW resp. 1.1/1.3kW 74 100 125 22 183 275 242 158 125 251 308 400 207 71 232 80 125 295 389 27
1.5/1.75kW 109 100 127 22 189 275 242 158 140 269 323 409 209 71 245 90 125 305 399 30
LKH-5, DIN
120 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-10, SMS
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
1.5/1.75kW 109 100 132 23 189 275 242 142 140 268 323 323 215 87 245 90 125 311 397 36
2.2/2.5kW 109 125 132 23 189 275 242 142 140 268 323 409 215 87 270 90 125 311 397 39
3.0/3.5kW 78 140 140 23 185 295 320 142 160 323 357 467 235 87 299 100 145 321 431 47
4.0/4.6kW 81 140 147 23 184 297 320 142 190 359 383 496 242 87 301 112 147 330 443 57
LKH-10, SMS
2008/11 121
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-10, DIN
Pumps
1.5/1.75kW 109 100 132 23 189 275 242 142 140 268 323 323 215 87 245 90 125 311 397 36
2.2/2.5kW 109 125 132 23 189 275 242 142 140 268 323 409 215 87 270 90 125 311 397 39
3.0/3.5kW - - - - - - - - - - - - - - - - - - - -
4.0/4.6kW - - - - - - - - - - - - - - - - - - - -
LKH-10, DIN
122 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-15, SMS
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
3.0/3.5kW 78 140 176 43 185 295 320 166 160 323 357 467 271 66 299 100 145 321 431 51
4.0/4.6kW 81 140 183 43 184 297 320 166 190 359 383 492 278 66 301 112 147 330 443 61
5.5/6.3kW 81 178 181 43 184 317 400 166 216 383 380 513 316 66 402 132 167 348 481 79
LKH-15, SMS
2008/11 123
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-15, DIN
Pumps
3.0/3.5kW 78 140 176 43 185 295 320 166 160 323 357 467 271 66 299 100 145 321 431 51
4.0/4.6kW 81 140 183 43 184 297 320 166 190 359 383 492 278 66 301 112 147 330 443 61
5.5/6.3kW 81 178 181 43 184 317 400 166 216 383 380 513 316 66 402 132 167 348 481 79
LKH-15, DIN
124 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-20, SMS
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
1.5/1.75kW 109 100 145 27 189 275 242 180 140 268 323 409 227 88 245 90 125 311 397 38
2.2/2.5kW 109 125 145 27 189 275 242 180 140 268 323 409 227 88 270 90 125 311 397 41
3.0/3.5kW 78 140 152 27 185 295 320 180 160 323 357 467 247 88 299 100 145 321 431 49
4.0/4.6kW 81 140 159 27 184 297 320 180 190 359 383 496 254 88 301 112 147 330 443 59
5.5/6.3 kW resp. 7.5/8.6kW 81 178 157 27 184 317 400 180 216 383 380 513 292 88 402 132 167 348 481 77
LKH-20, SMS
2008/11 125
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-20, DIN
Pumps
1.5/1.75kW 109 100 145 27 189 275 242 180 140 268 323 409 227 88 245 90 125 311 397 38
2.2/2.5kW 109 125 145 27 189 275 242 180 140 268 323 409 227 88 270 90 125 311 397 41
3.0/3.5kW 78 140 152 27 185 295 320 180 160 323 357 467 247 88 299 100 145 321 431 49
4.0/4.6kW 81 140 159 27 184 297 320 180 190 359 383 496 254 88 301 112 147 330 443 59
LKH-20, DIN
126 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
Pumps
LKH-20/165-FSS-DIN-5.5/6.3kW-EPDM iscr 6-9612 48 4954
(DIN = Std DIN)
(ADIN=Aceptic DIN 11864)
LKH-20/165-FSS-DIN-7.5/8.6kW-EPDM iscr 6-9612 48 4956
2008/11 127
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-25, SMS
Pumps
7.5/8.6kW 81 178 163 32 184 317 400 193 216 383 380 513 298 106 402 132 167 348 481 81
11.0/12.5kW resp. 15.0/17.0kW 105 210 192 32 228 345 483 193 254 485 490 607 345 106 493 160 195 438 554 125/134
LKH-25, SMS
128 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-25, DIN
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
7.5/8.6kW - - - - - - - - - - - - - - - - - - - -
LKH-25, DIN
2008/11 129
3. Pumps
Sanitary pumps / Centrifugal pumps
130 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-35, SMS
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
7.5/8.6kW 81 178 148 23 184 317 400 193 216 383 380 513 283 119 402 132 167 348 481 81
11.0/12.5kW resp. 15.0/17.0kW 105 210 177 23 228 345 483 193 254 485 490 607 330 119 493 160 195 438 554 125/134
LKH-35, SMS
2008/11 131
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-35, DIN
Pumps
7.5/8.6kW 81 178 148 23 184 317 400 193 216 383 380 513 283 119 402 132 167 348 481 81
11.0/12.5kW resp. 15.0/17.0kW 105 210 177 23 228 345 483 193 254 485 490 607 330 119 493 160 195 438 554 125/134
LKH-35, DIN
132 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-40, SMS
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
7.5/8.6kW 81 178 158 28 184 317 400 212 216 383 380 513 293 126 402 132 167 348 481 84
11.0/12.5kW, 105 210 187 28 228 345 483 212 254 485 490 607 340 126 493 160 195 438 554 128/137/147
15.0/17.0kW,
18.5/21.0kW
22.0/25.0kW 156 241 201 28 260 365 508 212 279 533 546 671 353 126 570 180 215 484 589 174
LKH-40, SMS
2008/11 133
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-40, DIN
Pumps
7.5/8.6kW 81 178 158 28 184 317 400 212 216 383 380 513 293 126 402 132 167 348 481 84
11.0/12.5kW, - - - - - - - - - - - - - - - - - - - -
15.0/17.0kW,
18.5/21.0kW
22.0/25.0kW - - - - - - - - - - - - - - - - - - - -
LKH-40, DIN
134 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
Pumps
LKH-40/235-SSS-ADIN-24.6kW-EPDM is 6-9613 25 6764
2008/11 135
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-45, SMS
Pumps
5.5/6.3kW, 7.5/8.6kW 81 178 177 41 184 317 400 193 216 383 380 513 312 97 402 132 167 347 480 83
11.0/12.5kW, 15.0/17.0kW 105 210 206 41 228 345 483 193 254 485 490 607 359 97 493 160 195 438 555 127/136
LKH-45, SMS
136 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-45, DIN
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
5.5/6.3kW, 7.5/8.6kW 81 178 177 41 184 317 400 193 216 383 380 513 312 97 402 132 167 347 480 83
11.0/12.5kW, 15.0/17.0kW 105 210 206 41 228 345 483 193 254 485 490 607 359 97 493 160 195 438 555 127/136
LKH-45, DIN
2008/11 137
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-50, SMS
Pumps
7.5/8.6kW 81 178 171 35 184 317 400 205 216 383 380 513 306 118 402 132 167 348 481 86
11.0/12.5kW, 105 210 200 35 228 345 483 205 254 485 490 607 353 118 493 160 195 438 554 130/139/149
15.0/17.0kW,
18.5/21.0kW
22.0/25.0kW 156 241 213 35 260 365 508 205 279 534 546 671 366 118 570 180 215 484 589 174
LKH-50, SMS
138 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-50, DIN
Pumps
A B C E F min F max G H J K P min P max Q R S T U Z min Z max Kg
7.5/8.6kW 81 178 171 35 184 317 400 205 216 383 380 513 306 118 402 132 167 348 481 86
11.0/12.5kW, 105 210 200 35 228 345 483 205 254 485 490 607 353 118 493 160 195 438 554 130/139/149
15.0/17.0kW,
18.5/21.0kW
22.0/25.0kW 156 241 213 35 260 365 508 205 279 534 546 671 366 118 570 180 215 484 589 174
LKH-50, DIN
2008/11 139
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-60, SMS
Pumps
15.0/17.0kW, 18.5/21.0kW 105 210 228 345 483 262 254 485 490 607 102 493 160 195 437 554 147/157
22.5/25.0kW 156 241 260 365 508 262 279 534 546 671 102 570 180 215 484 589 182
30.0/35.0kW 202 305 260 385 534 262 318 673 661 786 102 700 200 220 585 710 327
LKH-60, SMS
140 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-60, DIN
Pumps
A B F min F max G H J K P min P max R S T U Z min Z max Kg
15.0/17.0kW, 18.5/21.0kW 105 210 228 345 483 262 254 485 490 607 102 493 160 195 437 554 147/157
22.5/25.0kW 156 241 260 365 508 262 279 534 546 671 102 570 180 215 484 589 182
30.0/35.0kW 202 305 260 385 534 262 318 673 661 786 102 700 200 220 585 710 327
LKH-60, DIN
2008/11 141
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-70, SMS
Pumps
30.0/35.0kW, 37.0/43.0kW 246 305 260 385 534 318 673 661 786 147 700 200 220 585 381/381 710
55.0/63.0kW, 75.0/85.0kW 389 310/349 401 462 640 406 753 811 872 147 845/890 250 - 746/776 555/570 807/837
LKH-70, SMS
142 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-70, DIN
Pumps
A B F min F max G J K P min P max R S T U Z min Kg Z max
30.0/35.0kW, 37.0/43.0kW 246 305 260 385 534 318 673 661 786 147 700 200 220 585 381/381 710
55.0/63.0kW, 75.0/85.0kW 389 310/349 401 462 640 406 753 811 872 147 845/890 250 - 746/776 555/570 807/837
LKH-70, DIN
2008/11 143
3. Pumps
Sanitary pumps / Centrifugal pumps
SolidC-1
1.5kW 84 125 173 28 195 210 242 180 177 305 392 407 231 67 254 90 93 245 360 38
2.2kW 84 125 173 28 195 210 242 180 177 305 392 407 231 67 279 90 93 345 360 40
3.0kW 101 140 161 28 205 220 290 180 228 305 405 420 236 67 316 100 103 365 380 52
4.0kW 87 140 165 28 217 232 300 180 227 305 447 462 245 67 333 112 115 397 412 63
SolidC-1
144 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
SolidC-2
Pumps
4.0kW 87 140 172 35 217 232 300 200 227 349 447 462 252 94 333 112 115 397 412 65
5.5kW resp. 7.5kW 157 178 229 35 237 252 305 200 277 349 478 493 311 94 410 132 135 444 459 94/96
11.0kW 173 254 227 35 265 280 503 200 327 349 536 551 331 94 488 160 163 515 530 140
SolidC-2
2008/11 145
3. Pumps
Sanitary pumps / Centrifugal pumps
SolidC-3
7.5kW 157 178 226 31 237 252 305 210 277 390 478 493 308 121 410 132 135 444 459 102
11.0kW resp. 15.0kW 173 210 221 31 265 280 419 210 327 390 536 551 328 121 488 160 163 515 530 146/153
18.5kW 109 254 205 31 265 280 503 210 327 390 536 551 328 121 532 160 163 515 530 171
SolidC-3
146 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
SolidC-4
Pumps
11.0kW resp. 15.0kW 173 210 224 27 265 280 419 230 327 410 536 551 328 121 488 160 163 515 530 147/154
18.5kW resp. 22.0kW 109 254 204 27 265 280 503 230 327 410 536 551 328 121 532 160 163 515 530 170
SolidC-4
2008/11 147
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-112 Multi-Stage
LKH-112 2.2kW 109 125 173 76 189 275 242 140 140 268 323 408 255 86 270 90 125 311 397 49
LKH-112 3.0kW 78 140 181 76 185 295 320 140 160 323 353 463 276 86 299 100 145 321 431 57
LKH-112 4.0/4.6kW 81 140 188 76 184 297 320 140 190 359 378 492 283 86 301 112 147 330 443 67
LKH-112 5.5/6.3kW 81 178 186 76 184 317 400 140 216 383 376 509 321 86 402 132 167 347 480 85
LKH-112 Multi-Stage
148 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-113 Multi-Stage
Pumps
LKH-113 4.0/4.6kW 81 140 230 118 184 297 320 140 190 359 378 492 325 86 301 112 147 330 443 72
LKH-113 5.5/6.3kW 81 178 228 118 184 317 400 140 216 383 376 509 363 86 402 132 167 347 480 90
LKH-113 7.5/8.6kW 81 178 228 118 184 317 400 140 216 383 376 509 363 86 402 132 167 347 480 90
LKH-113 11.0/12.5kW 105 210 257 118 228 345 483 140 254 485 486 603 410 86 493 160 195 438 555 134
LKH-113 Multi-Stage
2008/11 149
3. Pumps
Sanitary pumps / Centrifugal pumps
LKH-114 Multi-Stage
LKH-114 7.5/8.6kW 81 178 269 159 184 317 400 140 216 383 376 509 404 86 402 132 167 347 480 100
LKH-114 11.0/12.5kW - - - - - - - - - - - - - - - - - - - -
LKH-114 15.0/17.0kW - - - - - - - - - - - - - - - - - - - -
LKH-114 Multi-Stage
150 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-10
Pumps
LKHP-10 1.5/1.75kW 109 100 143 29 189 275 242 142 140 289 248 433 226 87 245 124 43
LKHP-10 2.2/2.5kW 109 125 143 29 189 275 242 142 140 289 348 433 226 87 270 124 46
LKHP-10 4.0/4.6kW 81 140 158 29 164 297 320 142 190 359 359 492 253 87 312 146 64
LKHP-10
2008/11 151
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-15
LKHP-15 4.0/4.6kW 81 140 189 43 164 297 320 166 190 359 359 492 284 66 312 146 70
LKHP-15 5.5/6.3kW 121 140 187 43 184 317 400 166 216 383 376 509 322 66 381 166 88
LKHP-15
152 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-20
Pumps
LKHP-20 2.2/2.5kW 109 125 157 35 189 275 242 180 140 289 348 433 239 88 270 124 50
LKHP-20 4.0/4.6kW 81 140 172 35 164 297 320 180 190 359 359 492 267 888 312 146 68
LKHP-20 5.5/6.3kW 121 140 170 35 184 317 400 180 216 383 376 509 305 88 381 166 86
LKHP-20 7.5/8.6kW 121 178 170 35 184 317 400 180 216 383 376 509 305 88 381 166 86
LKHP-20
2008/11 153
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-25
LKHP-25 7.5/8.6kW 121 178 174 38 184 317 400 193 216 383 376 509 309 106 381 166 92
LKHP-25 11.0/12.5kW 106 210 204 38 228 345 483 193 254 485 486 603 356 106 486 194 136
LKHP-25 15.0/17.0kW 106 210 204 38 228 345 483 193 254 485 486 603 356 106 486 194 145
LKHP-25
154 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-35
Pumps
LKHP-35 7.5/8.6kW 121 178 158 28 184 317 400 193 216 383 376 509 293 119 381 166 91
LKHP-35 11.0/12.5kW 106 210 188 28 228 345 483 193 254 485 486 603 340 119 486 194 135
LKHP-35 15.0/17.0kW 106 210 188 28 228 345 483 193 254 485 486 603 340 119 486 194 144
LKHP-35
2008/11 155
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-40
LKHP-40 7.5/8.6kW 121 178 169 33 184 317 400 212 216 383 376 509 304 126 381 166 97
LKHP-40 11.0/12.5kW 106 210 198 33 228 345 483 212 254 485 486 603 350 126 486 194 141
LKHP-40 15.0/17.0kW 106 210 198 33 228 345 483 212 254 485 486 603 350 126 486 194 150
LKHP-40 18.5/21.0kW 106 254 198 33 228 345 483 212 254 485 486 603 350 126 486 194 160
LKHP-40 22.0/25.0kW 156 241 211 33 255 365 508 212 279 533 537 646 364 126 576 214 187
LKHP-40
156 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-40 (Continued)
Pumps
Outlet: 63.8 mm
Connection: Heavy duty clamp
2008/11 157
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-45
LKHP-45 5.5/6.3kW 121 140 185 44 184 317 400 193 216 383 376 509 320 97 381 166 95
LKHP-45 7.5/8.6kW 121 178 185 44 184 317 400 193 216 383 376 509 320 97 381 166 95
LKHP-45 11.0/12.5kW 106 210 215 44 228 345 483 193 254 485 486 603 367 97 486 194 139
LKHP-45 15.0/17.0kW 106 210 215 44 228 345 483 193 254 485 486 603 367 97 486 194 148
LKHP-45
158 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-50
Pumps
LKHP-50 7.5/8.6kW 121 178 183 41 184 317 400 205 216 383 376 509 318 117 381 166 101
LKHP-50 11.0/12.5kW 106 210 212 41 228 345 483 205 254 485 486 603 365 117 486 194 145
LKHP-50 15.0/17.0kW 106 210 212 41 228 345 483 205 254 485 486 603 365 117 486 194 154
LKHP-50 18.5/21.0kW 106 254 212 41 228 345 483 205 254 485 486 603 365 117 486 194 164
LKHP-50 22.0/25.0kW 156 241 225 41 255 365 508 205 279 533 537 646 378 117 576 214 189
LKHP-50
2008/11 159
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-50 (Continued)
Outlet: 76.5 mm
Connection: Heavy duty clamp
160 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
LKHP-60
Pumps
LKHP-60 15.0/17.0kW 106 210 215 42 228 345 483 261 254 485 486 603 367 102 486 194 167
LKHP-60 18.5/21.0kW 106 254 215 42 228 345 483 261 254 485 486 603 367 102 486 194 177
LKHP-60 22.0/25.0kW 156 241 228 42 255 365 508 261 279 533 537 646 380 102 576 214 202
LKHP-60 30.0/35.0kW 202 305 239 42 260 385 534 261 318 608 593 718 392 102 611 220 262
LKHP-60
2008/11 161
3. Pumps
Sanitary pumps / Centrifugal pumps
FM-OS
Pumps
FM-OS 84 100 109 28 201 231 204 98 153 252 345 375 136 45 232 22
FM-OS
162 2008/11
3. Pumps
Sanitary pumps / Centrifugal pumps
Pumps
GM
A B C E G H J K Kg Q R S
GM
2008/11 163
3. Pumps
Sanitary pumps / Eccentric scew pumps
Product/Fluid Data
• Fluid to be pumped
• Viscosity
• SG/Density
Pumps
Performance Data
• Flow rate, minimum, normal and maximum
• Discharge head/pressure (closest to pump outlet)
• Suction condition
BH and SH models
- Open hygienic pin joints that is easy to clean
- Pressure up to 24 bar
- Mechanical seal SHJ Single shaft seal or Flushed shaft seal
Application
For non-viscous up to highly viscous fluids with or without particles e.g. Milk based pudding and Rice pudding.
BH
Block construction design with direct flanged
drive and motor which means space saving.
SH
Bearing house construction in “Heavy duty”
design.
164 2008/11
3. Pumps
Sanitary pumps / Eccentric scew pumps
BY and SY models
- Closed pin joints for non-lubricating fluids
- Pressure up to 24 bar
- Mechanical seal HJ 977 Single shaft seal or Flushed shaft seal
Application
For non-viscous up to highly viscous fluids with or without particles e.g. Tomato ketchup and Tomato pure.
BY
Block construction design with direct flanged
drive and motor which means space saving.
Pumps
SY
Bearing house construction in “Heavy duty”
design.
2008/11 165
3. Pumps
Sanitary pumps / Liquid ring pumps
MR Liquid-Ring Pumps
MR is a liquid-ring pump specially designed for pumping liquids containing air or gas. The pump is for use in food,
chemical, pharmaceutical and similar industries. The pump is mainly used for CIP-return application. All product
wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AISI 316L. Seals are made
of EPDM rubber Cap nuts, legs, leg brackets and shroud are made of stainless steel AISI 304. The shroud has noise
absorbing lining inside. MR-166S, 185S and 200S: Adaptor is in cast iron which is zinc coated and laquered making
it highly corrosion resistant. On MR-166S, -185S and 200S, the mechanical single seals have stationary seal rings of
acid-resistant steel AISI 329 and rotating seal rings of carbon. The MR-300 has mechanical single seal with station-
ary seal rings of carbon and rotating seal rings of acid-resistant steel AISI 329.
Pumps
166 2008/11
3. Pumps
Sanitary pumps / Liquid ring pumps
MR-166/185/200
Pumps
MR-166S 2.2/2.5kW 78 140 185 117 185 295 320 129 160 323 357 469 280 - 299 145 55
MR-185S/200S 5.5-12.5kW 81 178 204 140 184 317 400 154 216 383 380 513 339 - 402 167 77/85
MR-166/185/200
2008/11 167
3. Pumps
Sanitary pumps / Liquid ring pumps
MR-300
Pumps
MR-300 15.0/17kW 106 210 149 228 345 483 205 254 485 486 603 302 190 493 150 195
MR-300 18.5/21.0kW 156 241 162 260 365 508 205 279 533 537 646 315 190 570 195 215
MR-300
168 2008/11
3. Pumps
Sanitary pumps / Rotary Lobe Pumps
Product/Fluid Data
Fluid to be pumped
Viscosity
SG/Density
Pumping temperature, minimum, normal and maximum
Cleaning in Place temperature(s), minimum, normal and maximum
Pumps
Performance Data
Flow rate, minimum, normal and maximum
Discharge head/pressure (closest to pump outlet)
Suction condition
Contact your TP representative to get more information.
2008/11 169
3. Pumps
Sanitary pumps / Rotary Lobe Pumps
170 2008/11
3. Pumps
Sanitary pumps / Rotary Lobe Pumps
Pumps
components are manufactured in 316 type stainless steels including the pump shafts. High strength Duplex,
stainless steel shafts are used on all SRU high pressure models. Other material options are available to order.
2008/11 171
3. Pumps
Sanitary pumps / Rotary Lobe Pumps
Pump Gearbox
Pumps
The OptiLobe has a universal gearbox design which gives the flexibility of mounting pumps with the inlet and out-
let ports in either a vertical or horizontal plane by simply changing the foot position.
A stainless steel gear canister and electro-less nickel plated bearing housing provides a clean, paint free corrosion
resistant external finish.
Materials of Construction
Gear canister - 304 stainless steel.
Bearing housing - electroless nickel plated cast iron.
Shafts - duplex stainless steel.
Pumphead - product wetted components in 316L .
Product wetted elastomers of EPDM, FPM all FDA conforming.
172 2008/11
3. Pumps
Non-sanitary pumps / Rotary Lobe Pumps
Pumps
2008/11 173
3. Pumps
Non-sanitary pumps / Centrifugal pumps
174 2008/11
3. Pumps
Non-sanitary pumps / Centrifugal pumps
PJE
Pumps
2 welding nipples (pos. a) and
2 couplings (pos. b) must be PJE nipple DN32 SS 90503-1512
ordered separatly to a DN32
CRN pump.
2008/11 175
3. Pumps
Non-sanitary pumps / Centrifugal pumps
D2
D1
B2
G 1/2 G 1/2
Pumps
B1
P (PJE)
G 1/2
ø42,2
4 x ø13
50
22
100 180
150 210
210
CRN1/CRN3
B1 B2 B1+B2 D1 D2 Kg
176 2008/11
3. Pumps
Non-sanitary pumps / Centrifugal pumps
CRN1/CRN3
Pumps
CRN3-4 CRN3-4 DN32 0.37kW 50Hz SiC/SiC EPDM 90503-5875
Nominal Diameter:DN32
Motor 50Hz: 3x220-240VD/380-415VY, 0.37kW
Shaft seal: SiC/SiC EPDM
Connection: PJE
SS Baseplate
2008/11 177
3. Pumps
Non-sanitary pumps / Centrifugal pumps
D2
D1
B2
G 1/2 G 1/2
Pumps
B1
P (PJE)
G 1/2
ø42,2
4 x ø13
50
22
100 180
150 210
210
CRN5
B1 B2 B1+B2 D1 D2 Kg
CRN5
178 2008/11
3. Pumps
Non-sanitary pumps / Centrifugal pumps
CRN5 (Continued)
Pumps
CRN5-6 CRN5-6 DN32 2.2kW 60Hz SiC/SiC EPDM 90503-5883
Nominal Diameter:DN32
Motor 60Hz: 3x220-277VD/380-480VY, 2.2kW
Shaft seal: SiC/SiC EPDM
Connection: PJE
SS Baseplate
2008/11 179
3. Pumps
Non-sanitary pumps / Centrifugal pumps
D2
D1
B2
G 1/2 G 1/2 D3
P (PJE)
B1
ø60.1
G 1/2
Pumps
26
4 x ø13
80
130 215
200 248
261
CRN10
B1 B2 B1+B2 D1 D2 Kg D3
CRN10
180 2008/11
3. Pumps
Non-sanitary pumps / Centrifugal pumps
CRN10 (Continued)
Pumps
Connection: PJE
SS Baseplate
2008/11 181
3. Pumps
Non-sanitary pumps / Centrifugal pumps
D2
D1
B2
G 1/2 G 1/2 D3
P (PJE)
B1
ø60.1
G 1/2
Pumps
4 x ø13
26
90
130 215
200 248
261
CRN15
B1 B2 B1+B2 D1 D2 Kg D3
CRN15
182 2008/11
3. Pumps
Non-sanitary pumps / Centrifugal pumps
CRN15 (Continued)
Pumps
Connection: PJE
SS Baseplate
2008/11 183
3. Pumps
Non-sanitary pumps / Centrifugal pumps
D2
D1
B2
D3
Pumps
G 1/2
PN16-25-40/DN65
B1
G 1/2 8 x ø18
G 1/2
ø107
ø145
ø185
105
4 x ø14
30
170 ø74
226 240
320 298
CRN32
B1 B2 B1+B2 D1 D2 D3 Kg
184 2008/11
3. Pumps
Non-sanitary pumps / Centrifugal pumps
CRN32
Pumps
2008/11 185
3. Pumps
Non-sanitary pumps / Diaphragm pumps
TR20
Application
TR20 is made from polyethylene (PE) and are suitable for handling almost any kind of liquid whether it is viscous,
corrosive and chemically aggressive or with solids.
Benefits
• Run dry without damage.
• Self priming up to 5 m from dry suction pipe.
• Air valve made from AISI 316L stainless steel.
Pumps
186 2008/11
3. Pumps
Non-sanitary pumps / Diaphragm pumps
Diaphragm Pump
A C D E F J L
Pumps
TR20 105 135 168 132 23 3/8" 1/8"
Diaphragm Pump
2008/11 187
3. Pumps
Non-sanitary pumps / Diaphragm pumps
Pumps
A Ø
188 2008/11
3. Pumps
Non-sanitary pumps / Vacuum pumps
Pumps
• Low noise and nearly free from vibration
• Protection against cavitation as standard
• Incorporated dirt drain
• Incorporated central drain
• No metallic contact of the rotating parts
2008/11 189
3. Pumps
Non-sanitary pumps / Vacuum pumps
w1* a
b
e h 4*
h5
Ø15
m4 n2
LEMB 91
Pumps
a b e h h4 h5 m4 n2 w1 Kg
50 Hz, 2.2 kW, GG/Bronze 250 110 91 228 229 60 240 140 399 29
50 Hz, 2.2 kW, GG/SS 250 110 91 228 229 60 240 140 399 29
50 Hz, 2.2 kW, SS/SS 250 110 91 228 229 60 240 140 399 29
60 Hz, 3.3 kW, GG/Bronze 250 110 91 238 253 60 240 160 420 34
60 Hz, 3.3 kW, GG/SS 250 110 91 238 253 60 240 160 420 34
60 Hz, 3.3 kW, SS/SS 250 110 91 238 253 60 240 160 420 34
LEMB 91
190 2008/11
3. Pumps
Non-sanitary pumps / Vacuum pumps
LEMB 91 (Continued)
Pumps
2008/11 191
3. Pumps
Non-sanitary pumps / Vacuum pumps
w1* a
b
e h 4*
h5
Ø15
m4 n2
LEMB 126
Pumps
a b e h h4 h5 m4 n2 w1 Kg
50 Hz, 3.0 kW, GG/Bronze 250 110 95 238 253 60 240 160 424 34
50 Hz, 3.0kW, GG/SS 250 110 95 238 253 60 240 160 424 34
50 Hz, 3.0kW, SS/SS 250 110 95 238 253 60 240 160 424 34
60 Hz, 4.8 kW, GG/Bronze 250 110 95 250 278 60 240 190 441 39
60 Hz, 4.8 kW, GG/SS 250 110 95 250 278 60 240 190 441 39
60 Hz, 4.8 kW, SS/SS 250 110 95 250 278 60 240 190 441 39
LEMB 126
192 2008/11
3. Pumps
Non-sanitary pumps / Vacuum pumps
Pumps
2008/11 193
3. Pumps
Non-sanitary pumps / Vacuum pumps
w1* a
e b
h4 *
h5
Ø15 n2
m4
LEMB 161
Pumps
a b e h h4 h5 m4 n2 w1 kg
50 Hz, 4.0kW, GG/Bronze 338 180 143 284 281 70 240 190 515 62
50 Hz, 4.0kW, GG/SS 338 180 143 284 281 70 240 190 515 62
50 Hz, 4.0kW, SS/SS 338 180 143 284 281 70 240 190 515 62
60 HZ, 6.0kW, GG/Bronze 338 180 143 304 320 60 278 216 591 90
60 Hz, 6.0kW, GG/SS 338 180 143 304 320 60 278 216 591 90
60 Hz, 6.0kW, SS/SS 338 180 143 304 320 60 278 216 591 90
LEMB 161
194 2008/11
3. Pumps
Non-sanitary pumps / Vacuum pumps
Pumps
2008/11 195
3. Pumps
Non-sanitary pumps / Vacuum pumps
a
e w b
h2
h1
h3
m n
LEMA 251
a b e h1 h2 h3 m n w Kg
Pumps
50Hz, 5.5kW, GG/Bronze 365 200 159 327 312 36 278 216 599 100
50Hz, 5.5kW, GG/SS 365 200 159 327 213 36 278 216 599 100
50Hz, 5.5kW, SS/SS 365 200 159 327 213 36 278 216 599 100
60Hz, 8.0kW, GG/Bronze 365 200 159 327 213 36 278 216 599 105
60Hz, 8.0kW, GG/SS 365 200 159 327 213 36 278 216 599 105
60Hz, 8.0kW, SS/SS 365 200 159 327 213 36 278 216 599 105
LEMA 251
196 2008/11
3. Pumps
Non-sanitary pumps / Vacuum pumps
Pumps
2008/11 197
3. Pumps
Non-sanitary pumps / Vacuum pumps
Pumps
198 2008/11
Select the right
components
Valves
4. Measuring instruments
4.1 Analysis ...............................................................201
4.1.1 Conductivity ........................................................ 202
4.1.1.1 Conductivity meters ........................................ 202
4.2 Flow ....................................................................206
4.2.1 Flow transmitters ................................................ 207
Pumps
4.2.2 Accessories ......................................................... 219
4.3 Level ....................................................................220
4.3.1 Capacitive level meter ....................................... 221
4.3.2 Level switches ..................................................... 222
4.3.3 Accessories, level ............................................... 228
Measuring instruments
4.4 Weighing .............................................................229
4.4.1 Load cell .............................................................. 230
4.4.2 Weighing transmitter ......................................... 233
4.4.3 Accessories, weighing ....................................... 235
4.5 Position ...............................................................241
4.5.1 Proximity switches .............................................. 241
4.6 Pressure ..............................................................242
Integration components
4.6.1 Pressure gauges ................................................. 243
4.6.2 Pressure transmitters .......................................... 247
4.6.3 Pressure switch ................................................... 260
4.6.4 Differential pressure transmitters ...................... 263
4.6.5 Accessories, pressure ......................................... 264 Automation and electrical
components
Index
Select the right
components
4.1 Analysis
In this assortment Tetra Pak supplies a range of analyzers for pH- and conductivity
measurment.
Conductivity measurment mainly used for alkali and acid concentration control.
Inline pH measurment in different products using glass-free sensors to optimise produc-
tion control and product quality.
Measuring instruments
2008/11 201
4. Measuring instruments
Analysis / Conductivity
4.1.1 Conductivity
CLD132
Application
Transmitter for measurement of conductivity and concentration with inductive sensor for the food industry, e.g.
product monitoring in dairies and the beverage industry, CIP system control, phase separation of product/water
and product/product mixtures in pipe systems, alkali and acid concentration control, etc.
Benefits
• Transmitter housing made of stainless steel
• Sensor made of highly resistant plastic (PEEK)
• Sterilisable sensor
• High measuring reliability due to extensive self-monitoring functions
• Insensitive to polarisation and soiling
Measuring instruments
202 2008/11
4. Measuring instruments
Analysis / Conductivity
CLD 132, DN50 CLD132 DIN50 4-20mA 24V AC/DC 242 83 92 No No 6-3181600012
Cable gland: M20x1.5
Connection: Dairy fitting CLD132 DIN50 4-20mA 24V AC/DC 242 83 92 Yes No 6-3181600141
DN50 DIN 11851
CLD132 DIN50 4-20mA 24V AC/DC 242 83 92 No Yes 90501-7785
A
B
CLD 132, Clamp CLD132 ISO Cl51 4-20mA 24V AC/DC 242 83 - No Yes 6-3180198312
Cable gland: M20x1.5
Connection: Clamp 51, ISO 2852 CLD132 ISO Cl51 4-20mA 24V AC/DC 242 83 - Yes Yes 6-3180198313
Measuring instruments
US CLD 132, Clamp CLD132 ISO Cl51 4-20mA 24V AC/DC 242 83 - No No 90510-1494
Cable gland: NPT 1/2"
Connection: Clamp 51, ISO 2852 CLD132 ISO Cl51 2x(4-20mA) 24V AC/DC 242 83 - No Yes 90510-1495
A
B
2008/11 203
4. Measuring instruments
Analysis / Conductivity
CLD 132, DN50 CLD132 DIN50 4-20mA 24V AC/DC 207 142 83 92 No Yes 90503-2060
Cable gland: M20x1.5
Connection: Dairy fitting CLD132 DIN50 4-20mA 24V AC/DC 207 142 83 92 Yes Yes 90503-2063
A
B
C
CLD 132, Clamp CLD132 ISO Cl51 4-20mA 24V AC/DC 207 142 83 - No Yes 90503-2061
Cable gland: M20x1.5
Connection: Clamp 51, ISO 2852 CLD132 ISO Cl51 4-20mA 24V AC/DC 207 142 83 - Yes Yes 90503-2064
A
B
C
Measuring instruments
US CLD 132, Clamp CLD132 ISO Cl51 4-20mA 24V AC/DC 207 142 83 - No No 90510-1496
Cable gland: NPT 1/2"
Connection: Clamp 51, ISO 2852 CLD132 ISO Cl51 2x(4-20mA) 24V AC/DC 207 142 83 - No Yes 90510-1497
A
B
C
204 2008/11
4. Measuring instruments
Analysis / Conductivity
Multi
Description Denomination A B C range Part No.
switch
CLD 132, DN50, Profibus PA CLD132 DIN50 Profibus PA 24V AC/DC 242 83 92 No 90501-7449
Cable gland: M20x1.5
Connection: Dairy fitting DN50 DIN 11851
A
B
CLD 132, Clamp, Profibus PA CLD132 ISO Cl51 Profibus-PA 24V AC/DC 242 83 - Yes 6-3180198314
Cable gland: M20x1.5
Connection: Clamp 51, ISO 2852 CLD132 ISO Cl51 Profibus PA 24V AC/DC 242 83 - No 90501-7778
A
B
Measuring instruments
CLD 132, Clamp, Profibus DP CLD132 ISO Cl51 Profibus-DP 24V AC/DC 242 83 - Yes 6-31801 9831 5
Cable gland: M20x1.5
Connection: Clamp 51, ISO 2852
A
B
Multi
Description Denomination A B C D range Part No.
switch
CLD 132, DN50, Profibus PA CLD132 DIN50 Profibus PA 24V AC/DC 207 142 83 92 No 90503-2058
Cable gland: M20x1.5
Connection: Dairy fitting DN50 DIN 11851 CLD132 DIN50 Profibus PA 24V AC/DC 207 142 83 92 Yes 90503-2062
A
B
C
CLD 132, Clamp, Profibus PA CLD132 ISO Cl51 24V Profibus-PA AC/DC 207 142 83 - Yes 90503-0240
Cable gland: M20x1.5
Connection: Clamp 51, ISO 2852 CLD132 ISO Cl51 Profibus PA 24V AC/DC 207 142 83 - No 90503-2059
A
B
C
2008/11 205
4. Measuring instruments
Flow / Conductivity
4.2 Flow
In this category of instruments Tetra Pak supply an extensive range of flow meters for
accurate and reliable product and media flow metering.
Electromagnetic flow meters for all kind of volumetric flow metering such as liquid products,
water, CIP solutions etc.
Mass flow meters are used for metering of mass- and volume flow in liquid products and
fluids without conductivity where high accuracy is essential.
Mass flow meters can include density and brix metering.
Measuring instruments
206 2008/11
4. Measuring instruments
Flow / Flow transmitters
Promag 50/53H
Application
All fluids with a minimum conductivity of > = 5 µS/cm can be measured:
- beverages, e.g. fruit juice, beer, wine
- milk products, fruit mixtures
- salt solutions
- acids and caustic solutions, etc.
A minimum conductivity of > = 20 µS/cm is required for measuring demineralized water
Benefits
• PFA lining for cleaning temperatures up to +150 °C
• Suitable for CIP/SIP cleaning and piggable
• Stainless-steel housing for high sanitary safety
• Field housing, IP 67
Measuring instruments
• IP 67 wall-mount housing for straightforward installation of the remote version
• Accuracy:
- Promag 50: ± 0.5%
- Promag 53: ± 0.2%
• Promag 53 with Touch Control: Operation without opening the housing
• Additional software packages:
- Pulsating flow, for batching applications.
2008/11 207
4. Measuring instruments
Flow / Flow transmitters
Promass 80/83F
Application
Welded sensor for fluid temperatures up to +200°C.
Application examples: Vegetable oils, animal fats and fruit concentrates.
Benefits
• Balanced dual-tube system for universal use in a wide range of process conditions
• High vibration immunity, “Fit and forget” installation, compact design, occupying very little space
• Measurement is independent of fluid properties
• Hygienic design, suitable for CIP/SIP cleaning
• Robust field housing stainless steel, IP 67 protection
• IP 67 wall-mount housing for the remote version
• Additional software packs:
- Batching applications
- Concentration measurement
• Multifunctional: Simultaneous measurement of flow (mass flow, volume flow), density and temperature
Measuring instruments
• High accuracy
- Promass 80: ±0.15%
- Promass 83: ±0.10%
• Promass 83 with Touch Control: Operation without opening the housing
208 2008/11
4. Measuring instruments
Flow / Flow transmitters
Weld-in tool
220 153 ISO welding Promag 50H ISO W25.0 0-18000l/h PFA 328 53 118.5 22.1 25.4 90503-1876
Pulse signal / 4-20mA HART 0.5% cal.
Display 24V DC SS house Promag 50H ISO W38.0 0-42000l/h PFA 330 129 224 35.2 40 90503-1888
171
Promag 50H ISO W51.0 0-66000l/h PFA 355 154 224 48.1 55 90503-1900
OD
Promag 50H ISO W63.5 0-120000l/h PFA 355 154 224 59.9 66 90503-1912
ID
Promag 50H ISO W76.1 0-180000l/h PFA 405 203 284 72.6 79 90503-1924
Measuring instruments
ISO welding, remote Promag 50H ISO W25.0 0-18000l/h PFA 213 53 118.2 22.1 25.4 90503-1879
Pulse signal / 4-20mA HART 0.5% cal.
Display 24V DC remote w. 10m cable Promag 50H ISO W38.0 0-42000l/h PFA 216 129 224 35.3 40 90503-1891
Promag 50H ISO W51.0 0-66000l/h PFA 241 154 224 48.1 55 90503-1903
Promag 50H ISO W63.5 0-120000l/h PFA 241 154 224 59.9 66 90503-1915
Promag 50H ISO W76.1 0-180000l/h PFA 290 203 284 72.6 79 90503-1927
OD
ID
2008/11 209
4. Measuring instruments
Flow / Flow transmitters
220 153 ISO welding, Profibus PA Promag 50H ISO W25.0 0-18000l/h PFA 328 53 118.5 22.1 25.4 90503-1870
Profibus PA 0.5% cal.
Display 24V DC SS house Promag 50H ISO W38.0 0-42000l/h PFA 330 129 224 35.2 40 90503-1882
171
Promag 50H ISO W51.0 0-66000l/h PFA 355 154 224 48.1 55 90503-1894
OD
Promag 50H ISO W63.5 0-120000l/h PFA 355 154 224 59.9 66 90503-1906
ID
Promag 50H ISO W76.1 0-180000l/h PFA 405 203 284 72.6 79 90503-1918
ISO welding, remote, Profibus PA Promag 50H ISO W25.0 0-18000l/h PFA 213 53 118.2 22.1 25.4 90503-1873
Profibus PA 0.5% cal.
Display 24V DC remote w. 10m cable Promag 50H ISO W38.0 0-42000l/h PFA 216 129 224 35.3 40 90503-1885
Promag 50H ISO W51.0 0-66000l/h PFA 241 154 224 48.1 55 90503-1897
Promag 50H ISO W63.5 0-120000l/h PFA 241 154 224 59.9 66 90503-1909
Promag 50H ISO W76.1 0-180000l/h PFA 290 203 284 72.6 79 90503-1921
Measuring instruments
OD
ID
210 2008/11
4. Measuring instruments
Flow / Flow transmitters
220 153 DIN welding Promag 50H DIN W25 0-18000l/h PFA 328 53 132.6 26 30 90503-1877
Pulse signal / 4-20mA HART 0.5% cal.
Display 24V DC SS house Promag 50H DIN W40 0-42000l/h PFA 330 129 224 38 43 90503-1889
171
Promag 50H DIN W50 0-66000l/h PFA 355 154 224 50 55 90503-1901
OD
Promag 50H DIN W65 0-120000l/h PFA 355 154 224 66 72 90503-1913
ID
Promag 50H DIN W80 0-180000l/h PFA 405 203 284 81 87 90503-1925
DIN welding, remote Promag 50H DIN W25 0-18000l/h PFA 213 53 132.6 26 30 90503-1880
Pulse signal / 4-20mA HART 0.5% cal.
Display 24V DC remote w. 10m cable Promag 50H DIN W40 0-42000l/h PFA 216 129 224 38 43 90503-1892
Promag 50H DIN W50 0-66000l/h PFA 241 154 224 50 55 90503-1904
Promag 50H DIN W65 0-120000l/h PFA 241 154 224 66 72 90503-1916
Promag 50H DIN W80 0-180000l/h PFA 290 203 284 81 87 90503-1928
Measuring instruments
OD
ID
220 153 DIN welding, Profibus PA Promag 50H DIN W25 0-18000l/h PFA 328 53 132.6 26 30 90503-1871
Profibus PA 0.5% cal.
Display 24V DC SS house Promag 50H DIN W40 0-42000l/h PFA 330 129 224 38 43 90503-1883
171
Promag 50H DIN W50 0-66000l/h PFA 355 154 224 50 55 90503-1895
OD
Promag 50H DIN W65 0-120000l/h PFA 355 154 225 66 72 90503-1907
ID
Promag 50H DIN W80 0-180000l/h PFA 406 203 284 81 87 90503-1919
DIN welding, remote, Profibus PA Promag 50H DIN W25 0-18000l/h PFA 213 53 132.6 26 30 90503-1874
Profibus PA 0.5% cal.
Display 24V DC remote w. 10m cable Promag 50H DIN W40 0-42000l/h PFA 216 129 224 38 43 90503-1886
Promag 50H DIN W50 0-66000l/h PFA 241 154 224 50 55 90503-1898
Promag 50H DIN W65 0-120000l/h PFA 241 154 224 66 72 90503-1910
Promag 50H DIN W80 0-180000l/h PFA 290 203 284 81 87 90503-1922
OD
ID
2008/11 211
4. Measuring instruments
Flow / Flow transmitters
220 153 Clamp Promag 50H Tri-Cl.25.0 0-18000l/h PFA 328 53 143 22.1 50.4 90503-1878
Pulse signal / 4-20mA HART 0.5% cal.
Display 24V DC SS house Promag 50H Tri-Cl.38.0 0-42000l/h PFA 330 129 277.2 34.8 50.4 90503-1890
171
Promag 50H Tri-Cl.51.0 0-66000l/h PFA 355 154 277.2 47.5 63.9 90503-1902
Promag 50H Tri-Cl.63.5 0-120000l/h PFA 355 154 277.2 60.2 77.4 90503-1914
ID
Promag 50H Tri-Cl.76.1 0-180000l/h PFA 406 203 337.2 72.9 90.9 90503-1926
Clamp, US version Promag 50H Tri-Cl.15.0 0-1620g(US)/h PFA 317 43 143 - 3/4" 90510-1519
Pulse signal / 4-20mA HART 0.5% cal.
Display 20-55V AC/16-62V DC Promag 50H Tri-Cl.25.0 0-3900g(US)/h PFA 317 53 143 - 1" 90510-1520
-
Esc
+ E House: Aluminium
Cable gland: NPT 1/2" Promag 50H Tri-Cl.38.0 11400g(US)/h PFA 319 128 276 - 1 1/2" 90510-1521
Promag 50H Tri-Cl.51.0 18000g(US)/h PFA 344 153 276 - 2" 90510-1522
Promag 50H Tri-Cl.63.5 30000g(US)/h PFA 344 153 276 - 2 1/2" 90510-1523
Promag 50H Tri-Cl.76.1 48000g(US)/h PFA 394 203 336 - 3" 90510-1524
Measuring instruments
Promag 50H Tri-Cl.101.6 75000g(US)/h PFA 394 203 336 - 4" 90510-1525
Clamp, remote Promag 50H Tri-Cl.25.0 0-18000l/h PFA 213 53 143 22.1 50.4 90503-1881
Pulse signal / 4-20mA HART 0.5% cal.
Display 24V DC remote w. 10m cable Promag 50H Tri-Cl.38.0 0-42000l/h PFA 216 129 277.2 34.8 50.4 90503-1893
Promag 50H Tri-Cl.51.0 0-66000l/h PFA 241 154 277.2 47.5 63.9 90503-1905
Promag 50H Tri-Cl.63.5 0-120000l/h PFA 241 154 277.2 60.2 77.4 90503-1917
Promag 50H Tri-Cl.76.1 0-180000l/h PFA 290 203 337.2 72.9 90.9 90503-1929
ID
212 2008/11
4. Measuring instruments
Flow / Flow transmitters
220 153 Clamp, Profibus PA Promag 50H Tri-Cl.25.0 0-18000l/h PFA 328 53 143 22.1 50.4 90503-1872
Profibus PA 0.5% cal.
Display 24V DC SS house Promag 50H Tri-Cl.38.0 0-42000l/h PFA 330 129 277.2 34.8 50.4 90503-1884
171
Promag 50H Tri-Cl.51.0 0-66000l/h PFA 355 154 277.2 47.5 63.9 90503-1896
Promag 50H Tri-Cl.63.5 0-120000l/h 355 154 277.2 60.2 77.4 90503-1908
ID
Promag 50H Tri-Cl.76.1 0-180000l/h PFA 406 203 337.2 72.9 90.9 90503-1920
Clamp, remote, Profibus PA Promag 50H Tri-Cl.25.0 0-18000l/h PFA 213 53 143 22.1 50.4 90503-1875
Profibus PA 0.5% cal.
Display 24V DC remote w. 10m cable Promag 50H Tri-Cl.38.0 0-42000l/h PFA 216 129 277.2 34.8 50.4 90503-1887
Promag 50H Tri-Cl.51.0 0-66000l/h PFA 241 154 277.2 47.5 63.9 90503-1899
Promag 50H Tri-Cl.63.5 0-120000l/h PFA 241 154 277.2 60.2 77.4 90503-1911
Promag 50H Tri-Cl.76.1 0-180000l/h PFA 290 203 337.2 72.9 90.9 90503-1923
Measuring instruments
ID
2008/11 213
4. Measuring instruments
Flow / Flow transmitters
220 153 ISO welding Promag 53H ISO W25.0 0-18000l/h PFA 328 53 118.5 22.1 25.4 90503-1960
Pulse signal / 4-20mA HART 0.2% cal.
Display 24V DC SS house Promag 53H ISO W38.0 0-42000l/h PFA 330 129 224 35.2 40 90503-1972
171
Promag 53H ISO W51.0 0-66000l/h PFA 355 154 224 48.1 55 90503-1984
OD
Promag 53H ISO W63.5 0-120000l/h PFA 355 154 224 59.9 66 90503-1996
ID
Promag 53H ISO W76.1 0-180000l/h PFA 405 203 284 72.6 79 90503-2008
ISO welding, remote Promag 53H ISO W25.0 0-18000l/h PFA 213 53 118.2 22.1 25.4 90503-1963
Pulse signal / 4-20mA HART 0.2% cal.
Display 24V DC remote w. 10m cable Promag 53H ISO W38.0 0-42000l/h PFA 216 129 224 35.3 40 90503-1975
Promag 53H ISO W51.0 0-66000l/h PFA 241 154 224 48.1 55 90503-1987
Promag 53H ISO W63.5 0-120000l/h PFA 241 154 224 59.9 66 90503-1999
Promag 53H ISO W76.1 0-180000l/h PFA 290 203 284 72.6 79 90503-2011
Measuring instruments
OD
ID
220 153 ISO welding, Profibus PA Promag 53H ISO W25.0 0-18000l/h PFA 328 53 118.5 22.1 25.4 90503-1954
Profibus PA 0.2% cal.
Display 24V DC SS house Promag 53H ISO W38.0 0-42000l/h PFA 330 129 224 35.2 40 90503-1966
171
Promag 53H ISO W51.0 0-66000l/h PFA 355 154 224 48.1 55 90503-1978
OD
Promag 53H ISO W63.5 0-120000l/h PFA 355 154 224 59.9 66 90503-1990
ID
Promag 53H ISO W76.1 0-180000l/h PFA 405 203 284 72.6 79 90503-2002
ISO welding, remote, Profibus PA Promag 53H ISO W25.0 0-18000l/h PFA 213 53 118.2 22.1 25.4 90503-1957
Profibus PA 0.2% cal.
Display 24V DC remote w. 10m cable Promag 53H ISO W38.0 0-42000l/h PFA 216 129 224 35.3 40 90503-1969
Promag 53H ISO W51.0 0-66000l/h PFA 241 154 224 48.1 55 90503-1981
Promag 53H ISO W63.5 0-120000l/h PFA 241 154 224 59.9 66 90503-1993
Promag 53H ISO W76.1 0-180000l/h PFA 290 203 284 72.6 79 90503-2005
OD
ID
214 2008/11
4. Measuring instruments
Flow / Flow transmitters
220 153 DIN welding Promag 53H DIN W25 0-18000l/h PFA 328 53 132.6 26 30 90503-1961
Pulse signal / 4-20mA HART 0.2% cal.
Display 24V DC SS house Promag 53H DIN W40 0-42000l/h PFA 330 129 224 38 43 90503-1973
171
Promag 53H DIN W50 0-66000l/h PFA 355 154 224 50 55 90503-1985
OD
Promag 53H DIN W65 0-120000l/h PFA 355 154 224 66 72 90503-1997
ID
Promag 53H DIN W80 0-180000l/h PFA 405 203 284 81 87 90503-2009
DIN welding, remote Promag 53H DIN W25 0-18000l/h PFA 213 53 132.6 26 30 90503-1964
Pulse signal / 4-20mA HART 0.2% cal.
Display 24V DC remote w. 10m cable Promag 53H DIN W40 0-42000l/h PFA 216 129 224 38 43 90503-1976
Promag 53H DIN W50 0-66000l/h PFA 241 154 224 50 55 90503-1988
Promag 53H DIN W65 0-120000l/h PFA 241 154 224 66 72 90503-2000
Promag 53H DIN W80 0-180000l/h PFA 290 203 284 81 87 90503-2012
Measuring instruments
OD
ID
220 153 DIN welding, Profibus PA Promag 53H DIN W25 0-18000l/h PFA 328 53 132.6 26 30 90503-1955
Profibus PA 0.2% cal.
Display 24V DC SS house Promag 53H DIN W40 0-42000l/h PFA 330 129 224 38 43 90503-1967
171
Promag 53H DIN W50 0-66000l/h PFA 355 154 224 50 55 90503-1979
OD
Promag 53H DIN W65 0-120000l/h PFA 355 154 224 66 72 90503-1991
ID
Promag 53H DIN W80 0-180000l/h PFA 405 203 284 81 87 90503-2003
DIN welding, remote, Profibus PA Promag 53H DIN W25 0-18000l/h PFA 213 53 132.6 26 30 90503-1958
Profibus PA 0.2% cal.
Display 24V DC remote w. 10m cable Promag 53H DIN W40 0-42000l/h PFA 216 129 224 38 43 90503-1970
Promag 53H DIN W50 0-66000l/h PFA 241 154 224 50 55 90503-1982
Promag 53H DIN W65 0-120000l/h PFA 241 154 224 66 72 90503-1994
Promag 53H DIN W80 0-180000l/h PFA 290 203 284 81 87 90503-2006
OD
ID
2008/11 215
4. Measuring instruments
Flow / Flow transmitters
220 153 Clamp Promag 53H Tri-Cl.25.0 0-18000l/h PFA 328 53 143 22.1 50.4 90503-1962
Pulse signal / 4-20mA HART 0.2% cal.
Display 24V DC SS house Promag 53H Tri-Cl.38.0 0-42000l/h PFA 330 129 277.2 34.8 50.4 90503-1974
171
Promag 53H Tri-Cl.51.0 0-66000l/h PFA 355 154 277.2 47.5 63.9 90503-1986
Promag 53H Tri-Cl.63.5 0-120000l/h PFA 355 154 277.2 60.2 77.4 90503-1998
ID
Promag 53H Tri-Cl.76.1 0-180000l/h PFA 406 203 337.2 72.9 90.9 90503-2010
Clamp, remote Promag 53H Tri-Cl.25.0 0-18000l/h PFA 213 53 143 22.1 50.4 90503-1965
Pulse signal / 4-20mA HART 0.2% cal.
Display 24V DC remote w. 10m cable Promag 53H Tri-Cl.38.0 0-42000l/h PFA 216 129 277.2 34.8 50.4 90503-1977
Promag 53H Tri-Cl.51.0 0-66000l/h PFA 241 154 277.2 47.5 63.9 90503-1989
Promag 53H Tri-Cl.63.5 0-120000l/h PFA 241 154 277.2 60.2 77.4 90503-2001
Promag 53H Tri-Cl.76.1 0-180000l/h PFA 290 203 337.2 72.9 90.9 90503-2013
Measuring instruments
ID
220 153 Clamp, Profibus PA Promag 53H Tri-Cl.25.0 0-18000l/h PFA 328 53 143 22.1 50.4 90503-1956
Profibus PA 0.2% cal.
Display 24V DC SS house Promag 53H Tri-Cl.38.0 0-42000l/h PFA 330 129 277.2 34.8 50.4 90503-1968
171
Promag 53H Tri-Cl.51.0 0-66000l/h PFA 355 154 277.2 47.5 63.9 90503-1980
Promag 53H Tri-Cl.63.5 0-120000l/h PFA 355 154 277.2 60.2 77.4 90503-1992
ID
Promag 53H Tri-Cl.76.1 0-180000l/h PFA 406 203 337.2 72.9 90.9 90503-2004
Clamp, remote, Profibus PA Promag 53H Tri-Cl.25.0 0-18000l/h PFA 213 53 143 22.1 50.4 90503-1959
Profibus PA 0.2% cal.
Display 24V DC remote w. 10m cable Promag 53H Tri-Cl.38.0 0-42000l/h PFA 216 129 277.2 34.8 50.4 90503-1971
Promag 53H Tri-Cl.51.0 0-66000l/h PFA 241 154 277.2 47.5 63.9 90503-1983
Promag 53H Tri-Cl.63.5 0-120000l/h PFA 241 154 277.2 60.2 77.4 90503-1995
Promag 53H Tri-Cl.76.1 0-180000l/h PFA 290 203 337.2 72.9 90.9 90503-2007
ID
216 2008/11
4. Measuring instruments
Flow / Flow transmitters
Clamp Promass 80F Tri-Cl.08 0-2000kg/h 341 367 22.1 50.4 5.35 90503-2026
Pulse signal / 4-20mA HART
0.15% cal. Promass 80F Tri-Cl.15.0 0-6500kg/h 341 398 22.1 50.4 8.30 90503-2027
Display 24V DC SS house
Promass 80F Tri-Cl.25.0 0-18000kg/h 341 434 22.1 50.4 12.00 90503-2028
Promass 80F Tri-Cl.40.0 0-45000kg/h 376 560 34.8 50.4 17.60 90503-2029
Clamp, Profibus PA Promass 80F Tri-Cl.08 0-2000kg/h 341 367 22.1 50.4 5.35 90503-2030
Measuring instruments
Profibus PA 0.15% cal.
Display 24V DC SS house Promass 80F Tri-Cl.15.0 0-6500kg/h 341 398 22.1 50.4 8.30 90503-2031
Promass 80F Tri-Cl.25.0 0-18000kg/h 341 434 22.1 50.4 12.00 90503-2032
Promass 80F Tri-Cl.40.0 0-45000kg/h 376 560 34.8 50.4 17.60 90503-2033
2008/11 217
4. Measuring instruments
Flow / Flow transmitters
Clamp Promass 83F Tri-Cl.08 0-2000kg/h 341 367 22.1 50.4 5.35 90503-2034
Pulse signal / 4-20mA HART
0.10% cal. Promass 83F Tri-Cl.15.0 0-6500kg/h 341 398 22.1 50.4 8.30 90503-2035
Display 24V DC SS house
Promass 83F Tri-Cl.25.0 0-18000kg/h 341 434 22.1 50.4 12.00 90503-2036
Promass 83F Tri-Cl.40.0 0-45000kg/h 376 560 34.8 50.4 17.60 90503-2037
Clamp, Profibus PA Promass 83F Tri-Cl.08 0-2000kg/h 341 367 22.1 50.4 5.35 90503-2038
Measuring instruments
Promass 83F Tri-Cl.25.0 0-18000kg/h 341 434 22.1 50.4 12.00 90503-2040
Promass 83F Tri-Cl.40.0 0-45000kg/h 376 560 34.8 50.4 17.60 90503-2041
218 2008/11
4. Measuring instruments
Flow / Accessories
4.2.2 Accessories
Measuring instruments
2008/11 219
4. Measuring instruments
Level / Accessories
4.3 Level
Tetra Pak provide level measeurment for level limit switching and continuous level.
Level switches are used for high, low level and empty tube detection to protect product and
equipment.
Continuous level measurment are used for monitoring of level in tanks and vessels.
Measuring instruments
220 2008/11
4. Measuring instruments
Level / Capacitive level meter
FMI51
Measuring instruments
Connection: Clamp FMI51 Tri-Cl.2" L=840mm 4-20mA HART 64 840 90503-8694
El. connection: M20
FMI51 Tri-Cl.2" L=875mm 4-20mA HART 64 875 90503-8696
B
2008/11 221
4. Measuring instruments
Level / Level switches
FTL20H
Application
The Liquiphant T FTL 20 H is a level limit switch for liquids in storage tanks, agitators and pipes which have to meet
particularly high hygiene standards internally and externally.
It is used in particular in areas where other measurement methods would probably fail: e.g. in the event of viscosity,
build-up, turbulences, flows, air bubbles, rash temperature change when cleaning. The Liquiphant T FTL 20 H is a
hygiene version for fluid temperatures up to 150°C.
Benefits
• Stainless steel housing, air-tight even in the event of hour-long overflooding and intensive cleaning
• Easy to install even at points difficult to access due to compact design
• CIP and SIP cleanability ensured
FTL50H/FTL51H
Application
Measuring instruments
The Liquiphant M FTL50H/FTL51H is a level limit switch for use in all liquids
- for temperatures of –40 °C to 150 °C.
- for pressures up to 64 bar
- for viscosity up to 10000 mm2/s
- for densities 0.5 g/cm3 or 0.7 g/cm3
The function is not affected by flow, turbulence, bubbles, foam, vibration, bulk solids content or build-up. The
Liquiphant is thus the ideal substitute for float switches.
Benefits
• PROFIBUS PA
• No calibration: quick, low-cost start-up
• No mechanically moving parts: no maintenance, no wear, long operating life
222 2008/11
4. Measuring instruments
Level / Level switches
Connections
ø 65
Cables
Please see "Automation and
electrical components"
27, 5
min. 40 mm
FTL20H
Measuring instruments
Description Denomination Part No.
10-35V DC 3-wire
Connection: Tri-Clamp FTL20H Tri-Cl.2" 10-35V DC 3-wire M12 90503-3191
El. connector: M12x1 circulare
connector PPSU
Material: Ra<1.5um SS house IP65
108.8
22.7
2008/11 223
4. Measuring instruments
Level / Level switches
FTL20H (Continued)
224 2008/11
4. Measuring instruments
Level / Level switches
FTL20H (Continued)
10-35V DC 3-wire
Connection: EE2
El. connector: M12x1 circulare
R D 5 2 x 1/6
connector PPSU
Material: Ra<1.5um SS house IP65
Coupling nut for weld-in adaptor is
included
22.7
116
Measuring instruments
52.9
47.9
19-253V AC 2-wire
Connection: EE2
R D 5 2 x 1/6 El. connector: QUICKON
Material: Ra<1.5um SS house IP65
Coupling nut for weld-in adaptor is
45
included
28. 5
45.5
138.8
47.9
52.9
2008/11 225
4. Measuring instruments
Level / Level switches
FTL50H
66,5
Connection: SMS 51
El. connection: Cable gland FTL50H SMS51 19-253VAC 2-wire 90503-2232
M20x1.5
Material: Ra<0.3 SS house IP66 FTL50H SMS51 Profibus PA 90503-2233
SMS nut is included
ma x . 1 5 0
~2 5
66,5
ø76 FTL50H, weld FTL50H 1" weld adapter 10-55V DC 3-w.PNP 90503-2221
Connection: EE2 weld
El. connection: Cable gland FTL50H 1" weld adapter 19-253V AC 2-w. 90503-2222
M20x1.5
Material: Ra<0.3 SS house IP66 FTL50H 1" weld adapter Profibus-PA 90503-1804
Coupling nut for weld-in
ma x . 1 5 0
adaptor is included
55,5
226 2008/11
4. Measuring instruments
Level / Level switches
FTL51H
FTL51H Stainless, clamp FTL51H Tri-Cl.11/2" 10-55V DC 3-wire PNP 6" 1 1/2" 90510-1526
Connection: Tri-Clamp
El. connection: NPT 1/2" FTL51H Tri-Cl.11/2" 10-55V DC 3-wire PNP 32" 1 1/2" 90510-1527
Material: Ra<0.3 SS house
NEMA 4x FTL51H Tri-Cl.11/2" 10-55V DC 3-wire PNP 24" 1 1/2" 90510-1528
Measuring instruments
2008/11 227
4. Measuring instruments
Level / Accessories, level
Welding necks
positioned.
~26
ø 65
228 2008/11
4. Measuring instruments
Weighing / Accessories, level
4.4 Weighing
Weighing
Tetra Pak provides weighing equipment for level measurment of tanks or for accurate
weighing, for example of mixing tanks.
The weighing range includes load cells and mounting equipment, both hygienic and
ordinary, as well as weighing transmitters and indicators. Earth-quake proof mouniting kits
can be ordered, but these must be configured for each special weighing case.
Measuring instruments
2008/11 229
4. Measuring instruments
Weighing / Load cell
PR6201
Application
PR6201 is a compression load cell, featuring absolute accuracy in tank and hopper weighing. It is made from
stainless steel and impervious to vibration, which makes it ideal for installing under tanks, silos, mixers and large
hoppers.
Benefits
• Extremly robust, reliable and accurate.
• Unique strain guauge technologie allows extended temperature range (-30 to + 95°C).
• Pre-calibrated output signal. Also available with 4-20 mA output signal.
• Capacity Range: 500kg - 20t.
• Accuracy: L, D1.
• Ingress Protection: IP68, eqiuvalent to NEMA 6.
PR6202
Measuring instruments
Application
PR6201 is a hygienic compression load cell, which features absolute accuracy in tank and hopper weighing. It is
made from stainless steel in a hygienic design, which makes it the first choice for food plants.
Benefits
• Hygineic and extremly robust, reliable and accurate.
• Unique strain guauge technologie allows extended temperature range (-30 to + 95°C).
• Pre-calibrated output signal.
• Capacity Range: 500kg - 25t.
• Accuracy: C1.
• Ingress Protection: IP68, eqiuvalent to NEMA 6.
PR6251
Application
PR6251 PanCake level cell is the ideal solution for all level control requirements using level-by-weight
measurements of liquids and solids. It is made from stainless steel.
Benefits
• Only 25/35 mm installation height.
• Also available with 4-20 mA output signal (LA).
• Capacity Range: 500kg - 16t.
• Accuracy: L.
• Hermetically welded seal, IP68 equivalent to NEMA 6.
• CENELEC Ex-version available (LE).
230 2008/11
4. Measuring instruments
Weighing / Load cell
PR6201
Measuring instruments
PR6201/14 nominal capacity 10t 90503-9913
2008/11 231
4. Measuring instruments
Weighing / Load cell
PR6202
PR6251
232 2008/11
4. Measuring instruments
Weighing / Weighing transmitter
PR1720
Application
PR1710 is a weighing transmitter for field mounting to be used with various tank load cells.
Benefits
• Calibration without weights (Smart Calibration).
• User friendly menu-prompted configuration without separate SW.
• Supplies up to 4 Load cells (350 Ohm) or 8 Load cells (650 Ohm).
• Configurable analogue output 0/4-20 mA
• Optional fieldbus boards are available: Profibus-DP or DeviceNet.
• Protection class IP 65.
PR5210
Application
Measuring instruments
PR5210 is a weighing transmitter, specifically designed for use in control cabinets. It combines convenient DIN rail
mounting with fast setup and straight forward configuration via a PC or a Palm PDA.
Benefits
• Smart Calibration feature for fast calibration even without weights.
• Supplies up to 4 Load cells (350 Ohm) or 8 Load cells (650 Ohm).
• Analogue output 0/4…20mA, 16 bit, galvanically isolated from supply, or
• Profibus-DP.
• Accuracy: L, D1.
• Protection class IP 20, DIN-Rail mounting.
MP30
Application
MP30 is a weighing transmitter with digital indicator, designed for use in control cabinets.
Benefits
• Easy set-up.
• Available with analogue output, 4 opto couplers or 4 relays.
• Protection class IP 65 when panel mounted.
2008/11 233
4. Measuring instruments
Weighing / Weighing transmitter
PR1720
PR5210
MP30
234 2008/11
4. Measuring instruments
Weighing / Accessories, weighing
PR6001
Application
PR6001 mounting kit is designed for tank weighing together with the specific load cell PR6201.
Benefits
• Best weighing performance because mounting kits and load cells form a complete weighing unit.
• Designed to withstand high lateral forces.
• Mounting kit with integrated lift-off protection, stops and dummy.
• Full stainless steel.
• Capacity Range: 500kg - 20t (and higher).
PR6002
Application
PR6002 mounting kit is designed for tank weighing together with the specific load cell PR6202.
Measuring instruments
Benefits
• Hygienic design in stainless steel.
• Best weighing performance because mounting kits and load cells form a complete weighing unit.
• Designed to withstand high lateral forces.
• Mounting kit with integrated lift-off protection, stops and dummy.
• Capacity Range: 500kg - 25t (and higher).
PR6051
Application
PR6051 mounting equipment should always be used together with the pancake load cell PR6251. One transition
plate and one base plate are needed per load cell.
Benefits
• Full stainless steel.
• Capacity Range: 500kg - 16t.
PR6101
Application
PR6101 mounting pivot for fixed tank legs, to be used together with load cells PR6201 or 6202.
2008/11 235
4. Measuring instruments
Weighing / Accessories, weighing
PR1720 accessories
Application
Field bus communication boards for the PR1720 transmitter.
MP30 accessories
Application
Output boards for MP30 transmitter/indicator for analogue and digital signals.
Connection accessories
Application
Junction boxes and cables for load cells.
Measuring instruments
236 2008/11
4. Measuring instruments
Weighing / Accessories, weighing
Measuring instruments
2008/11 237
4. Measuring instruments
Weighing / Accessories, weighing
238 2008/11
4. Measuring instruments
Weighing / Accessories, weighing
Measuring instruments
Mounting kits for PR6251
2008/11 239
4. Measuring instruments
Weighing / Accessories, weighing
Accessories
Grey, 10 m 90503-9952
Grey, 20 m 90503-9953
Grey, 30 m 90503-9954
Measuring instruments
240 2008/11
4. Measuring instruments
Position / Proximity switches
4.5 Position
Application
Proximity switches are used to detect the presence of various material, for example the position of swing-bends or
process pipes.
There are two principles to detect material, inductive or capacitive:
• Capacitive sensors are non-contact devices, which can detect the position of any conductive target.
• Inductive sensors are non-contact devices, which can detect the position of metallic targets.
Proximity switches
Measuring instruments
Inductive sensors M12x1 SS, M12-connector M12 70 M12 4 2/3wire 90510-0269
IP68/IP69K, flush mount
M18x1 SS, M12-connector M18 70 M12 8 2/3wire 90510-0270
2008/11 241
4. Measuring instruments
Pressure / Proximity switches
4.6 Pressure
The pressure meters are used for continues measuring of pressures in all kinds of
applications.
Pressure metering in pipes and vessels.
Differential pressure metering in pipe systems or closed tanks/vessels.
Pressure switches are used to detect high or low pressure for protection of equipment.
Measuring instruments
242 2008/11
4. Measuring instruments
Pressure / Pressure gauges
MIP120/MIP135
The gauge is ideal for advanced pressure measurement in extremely rugged conditions. The damping fluid
provides a guarantee for stable read off and low wear on moving parts especially with vibrations and pressure
variations with high frequency.
Stainless steel housing.
Measuring instruments
2008/11 243
4. Measuring instruments
Pressure / Pressure gauges
Vertical connection, SMS high pressure MIP135 SMS38 0-10MPa/0-100bar(g) HP nut 196 90503-6559
Damping fluid filled
Material housing: Stainless steel MIP135 SMS38 0-2.5MPa/0-25bar(g) HP nut 196 90503-6556
Connection: SMS 38 high pressure nut
MIP135 SMS38 0-4MPa/0-40bar(g) HP nut 196 90503-6557
244 2008/11
4. Measuring instruments
Pressure / Pressure gauges
Horisontal connection, SMS MIP135 SMS38 0-1MPa/0-10bar(g) horiz. 45 108 133 90503-6551
Damping fluid filled
Material housing: Stainless steel MIP135 SMS38 0-1.6MPa/0-16bar(g) horiz. 45 108 133 90503-6552
Connection: SMS 38 nut
MIP135 SMS38 -1-900kPa/-1-9bar(g) horiz. 45 108 133 90503-6553
Measuring instruments
Connection: ISO-G 3/8" B external
thread MIP120 G3/8" A -100-0kPa/-1-0bar(g) 45 81 15 NV17 90503-6560
2008/11 245
4. Measuring instruments
Pressure / Pressure gauges
246 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
FMB70
Application
The Deltapilot S product range is designed for continuous level measurement of liquids and pastes in the chemical,
pharmaceutical and foodstuffs industries as well as in water and wastewater treatment.
Together with an appropriate transmitter they can be used to:
- Determine level, volume, differential pressure, product weight, density
- Integrate the measuring point into various automation systems
Benefits
• Watertight, condensation-free, with long-term stability
• Linearity (better than 0.1% of measuring range)
• Low temperature coefficient (better than 0.1%/10 K)
PMP41/45
Application
Measuring instruments
The Cerabar M transmitters measure the gauge and absolute pressure of gases, vapours, liquids and dusts and
can be used in all areas of process engineering. The modular design of the Cerabar M enables it to be used in all
industrial environments.
Benefits
• Accuracy
- Linearity better than 0.2% of set span
- Adjustable measuring range with TD 10:1
- Long-term stability better than 0.1%
• Sensor
- Piezoresistive metal sensor for measuring ranges up to 400 bar (6000 psi)
• Electronics
- Analogue: low-cost and accurate with short response time especially for rapid processes
- Smart: intelligent with versatile operating procedures via HART protocol.
- PROFIBUS-PA: tried and tested for digital communications
• Housing
With its stainless steel housing without dead volume, the Cerabar M fulfils all the special hygienic requirements
of the food and pharmaceutical industries.
2008/11 247
4. Measuring instruments
Pressure / Pressure transmitters
PMP46
Application
The Cerabar M transmitter measures the gauge and absolute pressure of gases, vapours and liquids and can be
used in all areas of industry.
Installation and process conditions often make the use of diaphragm seals necessary.
Benefits
• Diaphragm seals for hygienic applications
• Accuracy
- Linearity better than 0.2% of set span
- Adjustable measuring range with TD 10:1
- Long-term stability better than 0.1%
• Piezoresistive metal sensor with metal diaphragm for measuring ranges up to 400 bar (6000 psi)
• Electronics
- Analogue: cost effective version with short response time especially for fast processes
- Smart: intelligent with versatile operating procedures via HART protocol
- PROFIBUS-PA: tried and tested for digital communications
• Housing
Measuring instruments
With its stainless steel housing and no dead volume, the Cerabar M fulfils all the special hygienic requirements
of the food and pharmaceutical industries
248 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
Connections
FMB70
FMB70 for DRD-flange FMB70 DRD-flange 0-400mbar w/o disp 132 102 65 204 90503-9803
4-20mA HART
El. connection: M20 FMB70 DRD-flange 0-1200mbar w/o disp 132 102 65 204 90503-9804
Material house: 316L
IP66 FMB70 DRD-flange 0-100mbar w/o disp 132 102 65 204 90503-9813
Measuring instruments
FMB70 DRD-flange 0-4Bar 132 102 65 204 90510-3964
FMB70 for DRD-flange FMB70 DRD-flange 0-100mbar w/o disp 132 102 65 204 90510-3531
Profibus PA
El. connection: M20 FMB70 DRD-flange 0-400mbar w/o disp 132 102 65 204 90510-3532
Material house: 316L
IP66 FMB70 DRD-flange 0-1200mbar w/o disp 132 102 65 204 90510-3533
2008/11 249
4. Measuring instruments
Pressure / Pressure transmitters
FMB70 (Continued)
FMB70 for universal FMB70 univ.adapter 0-1200mbar w/o disp 132 102 43.5 213 90503-9805
adapter
4-20mA HART FMB70 univ.adapter 0-4000mbar w/o disp 132 102 43.5 213 90503-9806
El. connection: M20 for mbar
ver. FMB70 univ.adapter 0-100mbar 132 102 43.5 213 90510-2612
and NPT 1/2" for psi ver.
Material house: 316L FMB70 univ.adapter 0-400mbar 132 102 43.5 213 90510-2613
IP66
FMB70 univ.adapter 0-1200mbar 132 102 43.5 213 90510-2614
250 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
FMB70 (Continued)
FMB70 for clamp FMB70 Tri-Cl 51.0 0-1200mbar w/o disp 132 102 DN51 204 90503-9810
4-20mA HART
El. connection: M20 for mbar FMB70 Tri-Cl 51.0 0-4000mbar w/o disp 132 102 DN51 204 90503-9811
ver.
and NPT 1/2" for psi ver. FMB70 Tri-Cl 51.0 0-1200mbar 132 102 DN51 204 90503-9814
Material house: 316L
IP66 FMB70 Tri-Cl.51.0 0-1.5psi 132 102 2" 204 90510-1416
FMB70 for clamp FMB70 Tri-Cl 51.0 0-10bar w/o disp 132 102 DN51 204 90510-4333
Profibus PA
El. connection: M20
Material house: 316L
IP66
Measuring instruments
FMB70 for DIN FMB70 DIN50 0-1200mbar w/o disp 132 102 DIN50 204 90503-9812
4-20mA HART
El. connection: M20
Material house: 316L
IP66
2008/11 251
4. Measuring instruments
Pressure / Pressure transmitters
FMB70 (Continued)
FMB70 for SMS FMB70 SMS51 0-100mbar w/o disp 132 102 SMS51 204 90503-9807
4-20mA HART
El. connection: M20 FMB70 SMS51 0-1200mbar w/o disp 132 102 SMS51 204 90503-9809
Material house: 316L
IP66 FMB70 SMS51 0-400mbar w/o disp 132 102 SMS51 204 90503-9808
Measuring instruments
252 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
PMP 41
PMP 41, Profibus PA PMP41 G1/2" 0-10bar(g) Profibus PA 2-w. 97 74 125 90503-2066
A Without display
B Material housing: 316L
El. connection: M20
Connection: Thread ISO 228 G1/2"
Measuring instruments
C
PMP 45
2008/11 253
4. Measuring instruments
Pressure / Pressure transmitters
PMP 45 (Continued)
PMP 45, Profibus PA - Clamp PMP45 Tri-Cl.38.0 -.95-0.3bar(g) Profibu 97 74 147 90503-2090
A 2-wire without display Profibus PA
B Material housing: 316L PMP45 Tri-Cl.38.0 0-0.1bar(g) Profibus P 97 74 147 90503-2091
El. connection: M20
Connection: DN38 Clamp ISO 2852 PMP45 Tri-Cl.38.0 0-0.4bar(g) Profibus P 97 74 147 90503-2092
254 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
PMP 45 (Continued)
PMP 45, Profibus PA - DIN PMP45 DIN25 -.95-0.3bar(g) Profibus PA 97 74 147 90503-2104
A 2-wire without display Profibus PA
B Material housing: 316L PMP45 DIN25 0-0.1bar(g) Profibus PA 97 74 147 90503-2105
El. connection: M20
Connection: DN25 DIN 11851 PMP45 DIN25 0-0.4bar(g) Profibus PA 97 74 147 90503-2106
PMP 45, Profibus PA - SMS PMP45 SMS38.0 -.95-0.3bar(g) Profibus PA 97 74 147 90503-2076
A 2-wire without display Profibus PA
B Material housing: 316L PMP45 SMS38.0 0-0.1bar(g) Profibus PA 97 74 147 90503-2077
El. connection: M20
Connection: SMS 38 PMP45 SMS38.0 0-0.4bar(g) Profibus PA 97 74 147 90503-2078
Measuring instruments
PMP45 SMS38.0 0-10bar(g) Profibus PA 97 74 147 90503-2075
2008/11 255
4. Measuring instruments
Pressure / Pressure transmitters
PMP 46
256 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
PMP 46 (Continued)
Measuring instruments
PMP46 SMS51.0 0-10bar(g) 4-20mA HART 97 74 259.5 90503-2125
PMP 46, Profibus PA - Clamp PMP46 Tri-Cl.38.0 0-10bar(g) Profibus PA 97 74 234.5 90503-2143
A 2-wire without display Profibus PA
B Material housing: 316L PMP46 Tri-Cl.38.0 0-1bar(g) Profibus PA 97 74 234.5 90503-2139
El. connection: M20
Connection: Clamp ISO 2852 PMP46 Tri-Cl.38.0 0-40bar(g) Profibus PA 97 74 234.5 90503-2145
2008/11 257
4. Measuring instruments
Pressure / Pressure transmitters
PMP 46 (Continued)
PMP 46, Profibus PA - DIN PMP46 DIN50 0-10bar(g) Profibus PA 97 74 245.5 90503-2161
A 2-wire without display Profibus PA
B Material housing: 316L PMP46 DIN50 0-1bar(g) Profibus PA 97 74 245.5 90503-2159
El. connection: M20
Connection: DN50 DIN 11851 PMP46 DIN50 0-40bar(g) Profibus PA 97 74 245.5 90503-2162
PMP 46, Profibus PA - SMS PMP46 SMS38.0 0-10bar(g) Profibus PA 97 74 254.5 90503-2130
A 2-wire without display Profibus PA
B Material housing: 316L PMP46 SMS38.0 0-1bar(g) Profibus PA 97 74 254.5 90503-2126
El. connection: M20
Connection: SMS PMP46 SMS38.0 0-4bar(g) Profibus PA 97 74 254.5 90503-2128
Measuring instruments
258 2008/11
4. Measuring instruments
Pressure / Pressure transmitters
PMC 45
PTP35
Measuring instruments
PTP35 Clamp PTP35 Cl.11/2" 0-10bar(g) 12-30V DC 38.7 24 122 90503-2255
a Material housing: 316L
El. connection: M12
b Connection: Clamp ISO 2852
PTP35 Cl.11/2" 0-1bar(g) 12-30V DC 38.7 24 122 90503-2253
2008/11 259
4. Measuring instruments
Pressure / Pressure switch
PTP31
Application
Pressure switch for monitoring absolute and gauge pressures in gases, vapours, liquids and dust.
Benefits
• Finely graduated measuring ranges from vacuum to 400 bar/ 6000 psi
• Integrated switching electronics for decentral and economic process monitoring and control
• Function check and information on site thanks to LEDs and digital display
• Metallic sensor diaphragm: corrosion-proof, abrasionproof and extremely overload-resistant
Measuring instruments
260 2008/11
4. Measuring instruments
Pressure / Pressure switch
PTP31
Measuring instruments
PTP31 PTP31 G1/2" 0-1bar(g) 12-30V DC 38.7 24 152 90503-2248
a El. connection: M12
Connection: Thread ISO 228 G1/2" PTP31 G1/2" 0-4bar(g) 12-30V DC
b Not for food applications
38.7 24 152 90503-2249
2008/11 261
4. Measuring instruments
Pressure / Pressure switch
PTP35
262 2008/11
4. Measuring instruments
Pressure / Differential pressure transmitters
FMD78
Application
The pressure transmitter is used for level, volume or mass measurement in liquids and for differential pressure
monitoring, e.g. of filters and tanks.
Benefits
• High accuracy: up to 0.075%
• Turn down 100:1
• Function-monitored from the measuring cell to the electronics
• Replaceable display
• Universal electronics for pressure and differential pressure
• Quick commissioning thanks to quick setup menu
• Easy and safe menu-guided operation on-site, via 4...20 mA with HART
• PROFIBUS PA or Foundation Fieldbus
Measuring instruments
FMD 78
With display aluminium house FMD78 Tri-Cl.63.5 capillary 3.5m 4-20mA HART 90503-5960
El. connection: M20
Connection: Clamp ISO 2852
2008/11 263
4. Measuring instruments
Pressure / Accessories, pressure
Welding necks
Welding neck for DRD flange DN50 316L w.seal ring PTFE / 91783-0000 125 20 90503-0680
For DB50L and FMB70
Material: 316L
B
Welding neck type G3/4" Weld-in adapter FTL50/51H 3/4" 55 26 6-31801 9546 3
For FTL50/51H
Material: 316L
Sensor can not be positioned
264 2008/11
4. Measuring instruments
Pressure / Accessories, pressure
ø 41 Welding neck type G1" Weld-in adapter FTL50/51H 1" 60 29.6 6-31801 9546 2
G1 For PMP45, PTP35 and FTL50/
IS O 228 51Hwith GW2 connection
Material: 316L
Sensor can not be positioned
B
øA – 0, 4
Welding neck type G1" Weld-in adapter FTL50/51H 1" 65 26 6-31801 9546 4
For PMP45, PTP35 and
FTL50/51H with
GW2 connection
Material: 316L
Sensor can be positioned
Measuring instruments
2008/11 265
4. Measuring instruments
Temperature / Accessories, pressure
4.7 Temperature
Temperature sensors are used for fast control and supervison of temperature in all
kinds of applications.
Measuring instruments
266 2008/11
4. Measuring instruments
Temperature / Temperature sensors
Weld-in connections
Measuring instruments
Connection: G1/8"
Sensor type: PT100 Pt-100 3-wire G1/8" Class A 25mm 20m 25 3 6-31801 5249 3
Material: 316L
Pt-100 3-wire G1/8" Class A 25mm 30m 25 3 6-31801 5249 6
2008/11 267
4. Measuring instruments
Temperature / Temperature transmitters
TPT12
Application
TPT12 is used for temperature measuring in pipelines, dimensions DN 25 - 100.
Benefits
• High accuracy
• Built-in transmitter = No need for transmitters in cabinet (saves space).
• Smaller sensor point lowers the risk of reading errors due to stem heat.
• Possible to use the existing wiring when you replace it with an existing sensor only adding a connector (and
removing transmitter in cabinet).
TMR35/TR44
Application
TMR35/TR44 is used for temperature measuring in tanks.
Measuring instruments
Benefits
• High accuracy
• Built-in transmitter = No need for transmitters in cabinet (saves space).
268 2008/11
4. Measuring instruments
Temperature / Temperature transmitters
Weld-in connections
For TPT12
G 1/8” See "Accessories, temperature"
ø 65
Measuring instruments
TPT12
2008/11 269
4. Measuring instruments
Temperature / Temperature transmitters
TMR35
TMR35, clamp TMR35 Cl.1" /1.5" 30mm 0-160Cdeg 4-20mA 30 6 77 M12x1 90510-4068
4-20mA
Sensor type: PT100
Connection: Clamp 1"/1.5"
El connection: M12x1
0-160ºC
270 2008/11
4. Measuring instruments
Temperature / Temperature transmitters
TR44
Measuring instruments
Profibus PA
Sensor type: PT100
Connection: G1"
0-100ºC
2008/11 271
4. Measuring instruments
Temperature / Accessories, temperature
Weld-in connections
Welding adaptor 1/8" ISO228/1-G1/8 f PT100 1.4404 T=1.25 R=19 1.25 6-31801 1894 1
G 1/8” For PT-100 1/8"
ISO228/1-G1/8 f PT100 1.4404 T=1.25 R=plain 1.25 90510-3521
R
ISO228/1-G1/8 f PT100 1.4404 T=1.5 R=19 1.5 90510-9098
a
Measuring instruments
Plug
272 2008/11
Select the right
components
Valves
5. Integration components
5.1 Seals ....................................................................275
5.1.1 Flange seals ........................................................ 275
5.1.2 O-rings for unions .............................................. 276
5.1.3 Seal rings for unions ........................................... 277
5.2 Pipes and Hoses .................................................285
Pumps
5.2.1 Sanitary pipes ..................................................... 286
5.2.2 Sanitary hoses ..................................................... 289
5.2.3 Non-Sanitary hoses ............................................ 293
5.2.4 Accessories ......................................................... 294
5.2.4.1 Hose clamps .................................................... 294
Measuring instruments
5.3 Fittings ................................................................296
5.3.1 Sanitary fittings ................................................... 297
5.3.1.1 Welding liners ................................................. 297
5.3.1.2 Hose liners ....................................................... 299
5.3.1.3 Welding male parts ......................................... 300
5.3.1.4 Adapter male parts ......................................... 302
5.3.1.5 Nuts .................................................................. 302
5.3.1.6 Pipe bends ....................................................... 304
Integration components
5.3.1.7 Concentric reducers ....................................... 313
5.3.1.8 Eccentric reducers .......................................... 318
5.3.1.9 T-pipes ............................................................. 320
5.3.1.10 Blanks ............................................................... 327
5.3.1.11 End caps .......................................................... 329 Automation and electrical
components
Index
Select the right
components
5.1 Seals
Tetra Pak gives you the possibility to select the best quality seal for your connections.
As standard we offer you the most commonly used seals in material NBR and EPDM for sanitary applications.
Application
Flange seals according to DIN 2690 and SMS 359 suitable for use in a wide range of non sanitary applications,
including hot and cold water, steam and a wide range of genera chemicals.
Integration components
DN50 107/61x1,5 107 61 1.5 PN16/PN40 6-736853 07
2008/11 275
5. Integration components
Seals / O-rings for unions
276 2008/11
5. Integration components
Seals / Seal rings for unions
SMS seal
NBR (Nitrile) SMS25 25.00/32.00x5.50 AL113 3033-76 NBR 32.0 5.5 25.0 6-190601 00
EPDM SMS25 25.0/32.0x5.5 AL113 3025-86 32.0 5.5 25.0 6-31317 0375 3
Integration components
SMS101.6 101.6/114.0x5.5 AL113 3025-86 114.0 5.5 101.6 6-31317 0886 2
2008/11 277
5. Integration components
Seals / Seal rings for unions
278 2008/11
5. Integration components
Seals / Seal rings for unions
Integration components
2008/11 279
5. Integration components
Seals / Seal rings for unions
NBR (Nitrile) CL25 22.80/52.70x5.50 NBR 52.7 5.5 22.8 6-9611 99 0765
280 2008/11
5. Integration components
Seals / Seal rings for unions
Integration components
2008/11 281
5. Integration components
Seals / Seal rings for unions
NBR (Nitrile) DIN CL10 10.20/36.20x5.50 NBR 36.2 5.5 10.2 6-9611 99 1999
DIN CL100 100.20 /121.20x5.50 NBR 121.2 5.5 100.2 6-9611 99 2008
EPDM DIN CL10 10.20/36.20x5.50 EPDM 36.2 5.5 10.2 6-9611 99 2009
282 2008/11
5. Integration components
Seals / Seal rings for unions
PTFE DIN CL10 10.00/36.20x5.10 PTFE 36.2 5.1 10.0 6-9611 99 2019
Integration components
2008/11 283
5. Integration components
Seals / Seal rings for unions
284 2008/11
5. Integration components
Pipes and Hoses / Seal rings for unions
Integration components
2008/11 285
5. Integration components
Pipes and Hoses / Sanitary pipes
286 2008/11
5. Integration components
Pipes and Hoses / Sanitary pipes
Integration components
DIN 11850, 2nd series
2008/11 287
5. Integration components
Pipes and Hoses / Sanitary pipes
288 2008/11
5. Integration components
Pipes and Hoses / Sanitary hoses
Features
Inside: White nature rubber
Temp: -30ºC to +70ºC (sterilizing 100ºC short periods)
Working pressure: 10 bar
Sanitary rubber hoses for food, FDA-approved, steel armoured, for fatty foods
For fatty and creamy milk products etc.
Features
Inside: White NBR rubber
Temp: -25ºC to +70ºC (sterilizing 110ºC short periods)
Working pressure: 10 bar
Integration components
2008/11 289
5. Integration components
Pipes and Hoses / Sanitary hoses
290 2008/11
5. Integration components
Pipes and Hoses / Sanitary hoses
With SMS female 1369 25/35 L=1m SMS 25/F 25/35x5.0 1" 1m 90503-2811
Material inside: White nature
rubber 1369 25/35 L=2m SMS 25/F 25/35x5.0 1" 2m 90503-2812
Fixed lenghts with SMS female
in both ends 1369 25/35 L=4m SMS 25/F 25/35x5.0 1" 4m 90503-2813
Integration components
1369 63/76 L=10m SMS 63.5/F 63/76x6.5 2 1/2" 10m 90503-2830
2008/11 291
5. Integration components
Pipes and Hoses / Sanitary hoses
Sanitary rubber hoses for food, FDA-approved, steel armoured, for fatty foods
With SMS female 1369F 25/37 L=1m SMS 25/F 25/37x6.0 1m 1" 90503-2841
Material inside: White NBR rubber
Fixed lenghts with SMS female in both ends 1369F 25/37 L=2m SMS 25/F 25/37x6.0 2m 1" 90503-2842
292 2008/11
5. Integration components
Pipes and Hoses / Non-Sanitary hoses
Integration components
2008/11 293
5. Integration components
Pipes and Hoses / Accessories
5.2.4 Accessories
Hose clamps
294 2008/11
5. Integration components
Pipes and Hoses / Accessories
Integration components
2008/11 295
5. Integration components
Fittings / Accessories
5.3 Fittings
296 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L), Short SMS25 AISI304 short 25/22.6x1.2 35.5 7.5 6-190704 00
Semi bright
SMS38 AISI304 short 38/35.6x1.2 55.0 9.0 6-190706 00
1.4404 (316L), Short SMS25 AISI316L short 25/22.6x1.2 35.5 7.5 6-190994 00
Semi bright
SMS38 AISI316L short 38/35.6x1.2 55.0 9.0 6-190996 00
1.4404 (316L), Long SMS25 AISI316L long 25/22.6x1.2 35.5 17.0 6-9611 30 9611
Semi bright
SMS38 AISI316L long 38/35.6x1.2 55.0 20.0 6-9611 30 9613
Integration components
SMS51 AISI316L long 51/48.6x1.2 65.0 20.0 6-9611 30 9614
2008/11 297
5. Integration components
Fittings / Sanitary fittings
Welding Liner DIN 11851 for DIN 11850 2nd series pipes
1.4307 (304L), Short DIN10 AISI304 short semi bright 13/10x1.5 22.0 13.0 6-9611 30 5950
Semi Bright
DIN15 AISI304 short semi bright 19/16x1.5 28.0 13.0 6-9611 30 5960
DIN20 AISI304 short semi bright 23/20x1.5 36.0 13.0 6-9611 29 0041
DIN25 AISI304 short semi bright 29/26x1.5 44.0 15.0 6-9611 30 1095
DIN32 AISI304 short semi bright 35/32x1.5 50.0 15.0 6-9611 30 1096
DIN40 AISI304 short semi bright 41/38x1.5 56.0 15.0 6-9611 30 1097
DIN50 AISI304 short semi bright 53/50x1.5 68.0 16.0 6-9611 30 1098
DIN65 AISI304 short semi bright 70/66x2.0 86.0 17.0 6-9611 30 1099
DIN80 AISI304 short semi bright 85/81x2.0 100.0 17.0 6-9611 30 1100
DIN100 AISI304 short semi bright 104/100x2.0 121.0 20.0 6-9611 30 1102
1.4404 (316L), Short DIN10 AISI316L short semi bright 13/10x1.5 22.0 13.0 6-9611 30 5951
Semi bright
DIN15 AISI316L short semi bright 19/16x1.5 28.0 13.0 6-9611 30 5961
DIN20 AISI316L short semi bright 23/20x1.5 36.0 13.0 6-9611 29 0042
DIN25 AISI316L short semi bright 29/26x1.5 44.0 15.0 6-9611 33 1095
DIN32 AISI316L short semi bright 35/32x1.5 50.0 15.0 6-9611 33 1096
DIN40 AISI316L short semi bright 41/38x1.5 56.0 15.0 6-9611 33 1097
DIN50 AISI316L short semi bright 53/50x1.5 68.0 16.0 6-9611 33 1098
DIN65 AISI316L short semi bright 70/66x2.0 86.0 17.0 6-9611 33 1099
Integration components
DIN80 AISI316L short semi bright 85/81x2.0 100.0 17.0 6-9611 33 1100
DIN100 AISI316L short semi bright 104/100x2.0 121.0 20.0 6-9611 33 1102
Welding Liner Aseptic DIN 11864-1A for DIN 11850 2nd series pipes
1.4404 (316L) DIN11864-A DN25 316L s br 29/26x1.5 42.9 22.0 6-9612 92 8844
Semi bright
Type "Form A" for o-ring DIN11864-A DN32 316L s br 35/32x1.5 48.9 25.0 6-9612 92 8845
298 2008/11
5. Integration components
Fittings / Sanitary fittings
Hose liner
SMS liner and nut SMS 25 female with safetyclamp 25x6.0 90503-6422
Material: AISI 316
SMS 38 female with safetyclamp 38x6.5 90503-6423
Integration components
SMS 63 female with safetyclamp 63x7.0 90503-6425
2008/11 299
5. Integration components
Fittings / Sanitary fittings
SMS seal
Male Part DIN 11851 for DIN 11850 2nd series pipes
1.4307 (304L), Short DIN10 AISI304 short semi br 13/10x1.5 17.0 28x1/8 6-9611 30 5900
Integration components
Semi bright
DIN15 AISI304 short semi br 19/16x1.5 17.0 34x1/8 6-9611 30 5910
300 2008/11
5. Integration components
Fittings / Sanitary fittings
Male Part DIN 11851 for DIN 11850 2nd series pipes (Continued)
1.4404 (316L), Short DIN10 AISI316L short semi br 13/10x1.5 17.0 28x1/8 6-9611 30 5901
Semi bright
DIN15 AISI316L short semi br 19/16x1.5 17.0 34x1/8 6-9611 30 5911
Male Part Aseptic DIN 11864-1A for DIN 11850 2nd series pipes
1.4404 (316L) DIN11864-A DN25 316L s br 29/26x1.5 26.0 52x1/6 6-9612 92 8834
Semi bright
Type "Form A" for o-ring DIN11864-A DN32 316L s br 35/32x1.5 30.0 58x1/6 6-9612 92 8835
Use the DIN 11851 nut
DIN11864-A DN40 316L s br 41/38x1.5 31.0 65x1/6 6-9612 92 8836
Integration components
DIN11864-A DN100 316L s br 104/100x2.0 50.0 130x1/4 6-9612 92 8840
2008/11 301
5. Integration components
Fittings / Sanitary fittings
SMS seal
SMS male to BSP male SMS25-ISO228/1-G1A AISI304 40x1/6 30.0 1" 22.5 15.0 6-190502 00
Semi bright
SMS38-ISO228/1-G1 1/2A AISI304 60x1/6 42.0 1 1/2" 35.5 23.0 6-190506 00
SMS male to BSP female SMS25-ISO228/1-G1 AISI304 40x1/6 15.0 1" 22.5 23.0 6-190514 00
Semi bright
SMS38-ISO228/1-G1 1/2 AISI304 60x1/6 22.0 1 1/2" 35.5 32.0 6-190518 00
5.3.1.5 Nuts
SMS seal
Integration components
302 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4301 (304) DN10/13.5/1/2" AISI304 DIN11851 38.0 18.0 28x1/8 14.0 6-9611 30 6420
Semi bright
Also for Aseptic DIN 11864-1 DN15/17.2/3/4" AISI304 DIN11851 44.0 18.0 34x1/8 25.0 6-9611 30 6430
DN40/42.4/1 1/2" AISI304 DIN11851 78.0 21.0 65x1/6 49.0 6-31318 0014 3
DN65/60.3/2 1/2" AISI304 DIN11851 112.0 25.0 95x1/6 80.0 6-31318 0014 5
Integration components
2008/11 303
5. Integration components
Fittings / Sanitary fittings
Expanding/welding ends, 90 1xD Exp ISO25.0x1.2 AISI304 25/22x1.2 55.0 25.0 6-190683 00
R=1xD, 1.4307 (304L)
Semi bright 90 1xD Exp ISO38.0x1.2 AISI304 38/35.6x1.2 70.0 38.0 6-31319 0210 1
Expanding/welding ends, 90 1xD Exp ISO25.0x1.2 AISI316L 25/22.6x1.2 55.0 25.0 6-191507 00
R=1xD, 1,4404 (316L)
Semi bright 90 1xD Exp ISO38.0x1.2 AISI316L 38/35.6x1.2 70.0 38.0 6-31319 0211 1
Expanding/welding ends, 90 1.5xD Exp ISO25.0x1.2 AISI316L 25/22.6x1.2 65.0 37.5 6-9611 31 0011
R=1.5xD, 1.4404 (316L)
Semi bright 90 1.5xD Exp ISO38.0x1.2 AISI316L 38/35.6x1.2 85.0 57.0 6-9611 31 0021
Expanding/welding ends, 90 1.5xD Exp ISO25.0x1.2 AISI304 25/22.6x1.2 65.0 37.5 6-9611 31 0010
R=1.5xD, 1.4307 (304L)
Semi bright 90 1.5xD Exp ISO38.0x1.2 AISI304 38/35.6x1.2 85.0 57.0 6-9611 31 0020
Integration components
Welding ends, R=1.5xD, 90 1.5xD W ISO25.0x1.2 AISI304 25/22.6x1.2 38.0 37.5 6-9611 31 2661
1.4307 (304L)
Semi bright 90 1.5xD W ISO38.0x1.2 AISI304 38/35.6x1.2 57.0 57.0 6-9611 31 2662
Welding ends, R=1.5xD, 90 1.5xD W ISO25.0x1.2 AISI316L 25/22.6x1.2 38.0 37.5 6-9611 31 2671
1.4404 (316L)
Semi bright 90 1.5xD W ISO38.0x1.2 AISI316L 38/35.6x1.2 57.0 57.0 6-9611 31 2672
304 2008/11
5. Integration components
Fittings / Sanitary fittings
Expanding/welding ends, 45 Exp ISO25.0x1.2 AISI304 25/22.6x1.2 70.0 47.0 6-9611 30 0661
1.4307 (304L)
Semi bright 45 Exp ISO38.0x1.2 AISI304 38/35.6x1.2 87.0 63.0 6-9611 30 0662
Expanding/welding ends, 45 Exp ISO25.0x1.2 AISI316L 25/22.6x1.2 70.0 47.0 6-9611 30 0809
1.4404 (316L)
Semi bright 45 Exp ISO38.0x1.2 AISI316L 38/35.6x1.2 87.0 63.0 6-9611 30 0810
Integration components
90° - DIN
Expanding/welding ends, 90 Exp DIN10 12.0x1.5 AISI304 s br/s br 12/9x1.5 38.0 26.0 6-9611 30 4120
1.4307 (304L)
Finish 90 Exp DIN15 18.0x1.5 AISI304 s br/s br 18/15x1.5 47.0 35.0 6-9611 30 4130
ID: Raw
OD: Polished 90 ExpDIN20 22.0x1.5 AISI304 s br/s br 22/19x1.5 52.0 40.0 6-9611 29 3921
90 Exp DIN25 28.0x1.5 AISI304 s br/s br 28/25x1.5 70.0 50.0 6-9611 30 4140
90 Exp DIN32 34.0x1.5 AISI304 s br/s br 34/31x1.5 78.0 55.0 6-9611 30 4150
90 Exp DIN40 40.0x1.5 AISI304 s br/s br 40/37x1.5 85.0 60.0 6-9611 30 4160
90 Exp DIN50 52.0x1.5 AISI304 s br/s br 52/49x1.5 97.0 70.0 6-9611 30 4170
2008/11 305
5. Integration components
Fittings / Sanitary fittings
Expanding/welding ends, 90 Exp DIN10 12.0x1.5 AISI304 mat/raw 12/9x1.5 38.0 26.0 6-9611 30 4121
1.4307 (304L)
Finish 90 Exp DIN15 18.0x1.5 AISI304 mat/raw 18/15x1.5 47.0 35.0 6-9611 30 4131
ID: Mat
OD: Mat 90 ExpDIN20 22.0x1.5 AISI304 mat/raw 22/19x1.5 52.0 40.0 6-9611 29 3923
90 Exp DIN25 28.0x1.5 AISI304 mat/raw 28/25x1.5 70.0 50.0 6-9611 30 4141
90 Exp DIN32 34.0x1.5 AISI304 mat/raw 34/31x1.5 78.0 55.0 6-9611 30 4151
90 Exp DIN40 40.0x1.5 AISI304 mat/raw 40/37x1.5 85.0 60.0 6-9611 30 4161
90 Exp DIN50 52.0x1.5 AISI304 mat/raw 52/49x1.5 97.0 70.0 6-9611 30 4171
Expanding/welding ends, 90 Exp DIN10 12.0x1.5 AISI316L s br/s br 12/9x1.5 38.0 26.0 6-9611 30 4122
1.4404 (316L)
Finish 90 Exp DIN15 18.0x1.5 AISI316L s br/s br 18/15x1.5 47.0 35.0 6-9611 30 4132
ID: Raw
OD: Polished 90 ExpDIN20 22.0x1.5 AISI316L s br/s br 22/19x1.5 52.0 40.0 6-9611 29 3922
90 Exp DIN25 28.0x1.5 AISI316L s br/s br 28/25x1.5 70.0 50.0 6-9611 30 4142
90 Exp DIN32 34.0x1.5 AISI316L s br/s br 34/31x1.5 78.0 55.0 6-9611 30 4152
90 Exp DIN40 40.0x1.5 AISI316L s br/s br 40/37x1.5 85.0 60.0 6-9611 30 4162
90 Exp DIN50 52.0x1.5 AISI316L s br/s br 52/49x1.5 97.0 70.0 6-9611 30 4172
Expanding/welding ends, 90 Exp DIN10 12.0x1.5 AISI316L mat/raw 12/9x1.5 38.0 26.0 6-9611 30 4123
1.4404 (316L)
Finish 90 Exp DIN15 18.0x1.5 AISI316L mat/raw 18/15x1.5 47.0 35.0 6-9611 30 4133
ID: Mat
OD: Mat 90 ExpDIN20 22.0x1.5 AISI316L mat/raw 22/19x1.5 52.0 40.0 6-9611 29 3924
90 Exp DIN25 28.0x1.5 AISI316L mat/raw 28/25x1.5 70.0 50.0 6-9611 30 4143
90 Exp DIN32 34.0x1.5 AISI316L mat/raw 34/31x1.5 78.0 55.0 6-9611 30 4153
Integration components
90 Exp DIN40 40.0x1.5 AISI316L mat/raw 40/37x1.5 85.0 60.0 6-9611 30 4163
90 Exp DIN50 52.0x1.5 AISI316L mat/raw 52/49x1.5 97.0 70.0 6-9611 30 4173
Welding ends, 1.4307 (304L) 90 W DIN10 12.0x1.5 AISI304 s br/s br 12/9x1.5 26.0 26.0 6-9611 30 9100
Finish
ID: Raw 90 W DIN15 18.0x1.5 AISI304 s br/s br 18/15x1.5 35.0 35.0 6-9611 30 1060
OD: Polished
90 W DIN20 22.0x1.5 AISI304 s br/s br 22/19x1.5 40.0 40.0 6-9611 30 1061
Welding ends, 1.4307 (304L) 90 W DIN10 12.0x1.5 AISI304 mat/raw 12/9x1.5 26.0 26.0 6-9611 30 9102
Finish
ID: Mat 90 W DIN15 18.0x1.5 AISI304 mat/raw 18/15x1.5 35.0 35.0 6-9611 30 9112
OD: Mat
90 W DIN20 22.0x1.5 AISI304 mat/raw 22/19x1.5 40.0 40.0 6-9611 30 9132
306 2008/11
5. Integration components
Fittings / Sanitary fittings
Welding ends, 1.4404 (316L) 90 W DIN10 12.0x1.5 AISI316L s br/s br 12/9x1.5 26.0 26.0 6-9611 30 9101
Finish
ID: Raw 90 W DIN15 18.0x1.5 AISI316L s br/s br 18/15x1.5 35.0 35.0 6-9611 30 9111
OD: Polished
90 W DIN20 22.0x1.5 AISI316L s br/s br 22/19x1.5 40.0 40.0 6-9611 30 9131
Welding ends, 1.4404 (316L) 90 W DIN10 12.0x1.5 AISI316L mat/raw 12/9x1.5 26.0 26.0 6-9611 30 9103
Finish
ID: Mat 90 W DIN15 18.0x1.5 AISI316L mat/raw 18/15x1.5 35.0 35.0 6-9611 30 9113
OD: Mat
90 W DIN20 22.0x1.5 AISI316L mat/raw 22/19x1.5 40.0 40.0 6-9611 30 9133
Integration components
2008/11 307
5. Integration components
Fittings / Sanitary fittings
Expanding/welding ends, 90 Exp DIN10 13.0x1.5 AISI304 s br/s br 13/10x1.5 38.0 26.0 6-9612 15 4558
1.4307 (304L)
Finish 90 Exp DIN15 19.0x1.5 AISI304 s br/s br 19/16x1.5 47.0 35.0 6-9612 15 4559
ID: Raw
OD: Polished 90 Exp DIN20 23.0x1.5 AISI304 s br/s br 23/20x1.5 52.0 40.0 6-9612 15 4560
90 Exp DIN25 29.0x1.5 AISI304 s br/s br 29/26x1.5 70.0 50.0 6-9612 15 4561
90 Exp DIN32 35.0x1.5 AISI304 s br/s br 35/32x1.5 78.0 55.0 6-9612 15 4562
90 Exp DIN40 41.0x1.5 AISI304 s br/s br 41/38x1.5 85.0 60.0 6-9612 15 4563
90 Exp DIN50 53.0x1.5 AISI304 s br/s br 53/50x1.5 97.0 70.0 6-9612 15 4564
90 Exp DIN40 70.0x2.0 AISI304 s br/s br 70/66x2.0 110.0 80.0 6-9611 30 4060
90 Exp DIN80 85.0x2.0 AISI304 s br/s br 85/81x2.0 118.0 90.0 6-9611 30 4080
90 Exp DIN100 104.0x2.0 AISI304 s br/s b 104/100x2.0 140.0 100.0 6-9611 30 4090
Expanding/welding ends, 90 Exp DIN10 13.0x1.5 AISI304 mat/raw 13/10x1.5 38.0 26.0 6-9612 15 4565
1.4307 (304L)
Finish 90 Exp DIN15 19.0x1.5 AISI304 mat/raw 19/16x1.5 47.0 35.0 6-9612 15 4566
ID: Mat
OD: Mat 90 Exp DIN20 23.0x1.5 AISI304 mat/raw 23/20x1.5 52.0 40.0 6-9612 15 4567
90 Exp DIN25 29.0x1.5 AISI304 mat/raw 29/26x1.5 70.0 50.0 6-9612 15 4568
90 Exp DIN32 35.0x1.5 AISI304 mat/raw 35/32x1.5 78.0 55.0 6-9612 15 4569
90 Exp DIN40 41.0x1.5 AISI304 mat/raw 41/38x1.5 85.0 60.0 6-9612 15 4570
90 Exp DIN50 53.0x1.5 AISI304 mat/raw 53/50x1.5 97.0 70.0 6-9612 15 4571
90 Exp DIN40 70.0x2.0 AISI304 mat/raw 70/66x2.0 110.0 80.0 6-9611 30 4061
Integration components
90 Exp DIN80 85.0x2.0 AISI304 mat/raw 85/81x2.0 118.0 90.0 6-9611 30 4081
90 Exp DIN100 104.0x2.0 AISI304 mat/raw 104/100x2.0 140.0 100.0 6-9611 30 4091
Expanding/welding ends, 90 Exp DIN10 13.0x1.5 AISI316L s br/s br 13/10x1.5 38.0 26.0 6-9612 15 4508
1.4404 (316L)
Finish 90 Exp DIN15 19.0x1.5 AISI316L s br/s br 19/16x1.5 47.0 35.0 6-9612 15 4509
ID: Raw
OD: Polished 90 Exp DIN20 23.0x1.5 AISI316L s br/s br 23/20x1.5 52.0 40.0 6-9612 15 4510
90 Exp DIN25 29.0x1.5 AISI316L s br/s br 29/26x1.5 70.0 50.0 6-9612 15 4511
90 Exp DIN32 35.0x1.5 AISI316L s br/s br 35/32x1.5 78.0 55.0 6-9612 15 4512
90 Exp DIN40 41.0x1.5 AISI316L s br/s br 41/38x1.5 85.0 60.0 6-9612 15 4513
90 Exp DIN50 53.0x1.5 AISI316L s br/s br 53/50x1.5 97.0 70.0 6-9612 15 4514
90 Exp DIN40 70.0x2.0 AISI316L s br/s br 70/66x2.0 110.0 80.0 6-9611 30 4062
90 Exp DIN80 85.0x2.0 AISI316L s br/s br 85/81x2.0 118.0 90.0 6-9611 30 4082
90 Exp DIN100 104.0x2.0 AISI316L s br/s 104/100x2.0 140.0 100.0 6-9611 30 4092
308 2008/11
5. Integration components
Fittings / Sanitary fittings
Expanding/welding ends, 90 Exp DIN10 13.0x1.5 AISI316L mat/raw 13/10x1.5 38.0 26.0 6-9612 15 4527
1.4404 (316L)
Finish 90 Exp DIN15 19.0x1.5 AISI316L mat/raw 19/16x1.5 47.0 35.0 6-9612 15 4528
ID: Mat
OD: Mat 90 Exp DIN20 23.0x1.5 AISI316L mat/raw 23/20x1.5 52.0 40.0 6-9612 15 4529
90 Exp DIN25 29.0x1.5 AISI316L mat/raw 29/26x1.5 70.0 50.0 6-9612 15 4530
90 Exp DIN32 35.0x1.5 AISI316L mat/raw 35/32x1.5 78.0 55.0 6-9612 15 4531
90 Exp DIN40 41.0x1.5 AISI316L mat/raw 41/38x1.5 85.0 60.0 6-9612 15 4532
90 Exp DIN50 53.0x1.5 AISI316L mat/raw 53/50x1.5 97.0 70.0 6-9612 15 4533
90 Exp DIN40 70.0x2.0 AISI316L mat/raw 70/66x2.0 110.0 80.0 6-9611 30 4063
90 Exp DIN80 85.0x2.0 AISI316L mat/raw 85/81x2.0 118.0 90.0 6-9611 30 4083
90 Exp DIN100 104.0x2.0 AISI316L mat/raw 104/100x2.0 140.0 100.0 6-9611 30 4093
Welding ends, 1.4307 (304L) 90 W DIN10 13.0x1.5 AISI304 mat/raw 13/10x1.5 26.0 26.0 6-9612 15 0565
Finish
ID: Mat 90 W DIN15 19.0x1.5 AISI304 mat/raw 19/16x1.5 35.0 35.0 6-9612 15 0566
OD: Mat
90 W DIN20 23.0x1.5 AISI304 mat/raw 23/20x1.5 40.0 40.0 6-9612 15 0567
Integration components
90 W DIN100 104.0x2.0 AISI304 mat/raw 104/100x2.0 100.0 100.0 6-9611 30 9192
Welding ends, 1.4307 (304L) 90 W DIN10 13.0x1.5 AISI304 s br/s br 13/10x1.5 26.0 26.0 6-9612 15 0558
Finish
ID: Raw 90 W DIN15 19.0x1.5 AISI304 s br/s br 19/16x1.5 35.0 35.0 6-9612 15 0559
OD: Polished
90 W DIN20 23.0x1.5 AISI304 s br/s br 23/20x1.5 40.0 40.0 6-9612 15 0560
2008/11 309
5. Integration components
Fittings / Sanitary fittings
Welding ends, 1.4404 (316L) 90 W DIN10 13.0x1.5 AISI316L mat/raw 13/10x1.5 26.0 26.0 6-9612 15 0527
Finish
ID: Mat 90 W DIN15 19.0x1.5 AISI316L mat/raw 19/16x1.5 35.0 35.0 6-9612 15 0528
OD: Mat
90 W DIN20 23.0x1.5 AISI316L mat/raw 23/20x1.5 40.0 40.0 6-9612 15 0529
Welding ends, 1.4404 (316L) 90 W DIN10 13.0x1.5 AISI316L s br/s br 13/10x1.5 26.0 26.0 6-9612 15 0508
Finish
ID: Raw 90 W DIN15 19.0x1.5 AISI316L s br/s br 19/16x1.5 35.0 35.0 6-9612 15 0509
OD: Polished
90 W DIN20 23.0x1.5 AISI316L s br/s br 23/20x1.5 40.0 40.0 6-9612 15 0510
310 2008/11
5. Integration components
Fittings / Sanitary fittings
45° - DIN
Welding ends, 1.4404 (316L) 45 W DIN25 28.0x1.5 AISI316L mat/raw 28/25x1.5 34.0 50.0 6-9611 29 3824
Finish: Mat
45 W DIN32 34.0x1.5 AISI316L mat/raw 34/31x1.5 37.0 55.0 6-9611 29 3834
Welding ends, 1.4301 (304) 45 W DIN25 28.0x1.5 AISI304 s br/s br 28/25x1.5 34.0 50.0 6-9611 29 3821
Finish
ID:Raw 45 W DIN32 34.0x1.5 AISI304 s br/s br 34/31x1.5 37.0 55.0 6-9611 29 3831
OD: Semi bright
45 W DIN40 40.0x1.5 AISI304 s br/s br 40/37x1.5 41.0 60.0 6-9611 29 3841
Welding ends, 1.4404 (316L) 45 W DIN25 28.0x1.5 AISI304 mat/raw 28/25x1.5 34.0 50.0 6-9611 29 3823
Finish: Mat
45 W DIN32 34.0x1.5 AISI304 mat/raw 34/31x1.5 37.0 55.0 6-9611 29 3833
Integration components
Welding ends, 1.4404 (316L) 45 W DIN25 28.0x1.5 AISI316L s br/s br 28/25x1.5 34.0 50.0 6-9611 29 3822
Finish
ID: Raw 45 W DIN32 34.0x1.5 AISI316L s br/s br 34/31x1.5 37.0 55.0 6-9611 29 3832
OD: Semi bright
45 W DIN40 40.0x1.5 AISI316L s br/s br 40/37x1.5 41.0 60.0 6-9611 29 3842
2008/11 311
5. Integration components
Fittings / Sanitary fittings
Welding ends, 1.4404 (316L) 45 W DIN65 70.0x2.0 AISI316L mat/raw 70/66x2.0 55.0 80.0 6-9611 29 3864
Finish: Mat
45 W DIN80 85.0x2.0 AISI316L mat/raw 85/81x2.0 62.0 90.0 6-9611 29 3874
Welding ends, 1.4301 (304) 45 W DIN65 70.0x2.0 AISI304 mat/raw 70/66x2.0 55.0 80.0 6-9611 29 3863
Finish
ID: Mat 45 W DIN80 85.0x2.0 AISI304 mat/raw 85/81x2.0 62.0 90.0 6-9611 29 3873
OD: Mat
45 W DIN100 104.0x2.0 AISI304 mat/raw 104/100x2.0 69.0 100.0 6-9611 29 3883
Welding ends, 1.4404 (316L) 45 W DIN65 70.0x2.0 AISI316L s br/s br 70/66x2.0 55.0 80.0 6-9611 29 3862
Finish: Semi bright
45 W DIN80 85.0x2.0 AISI316L s br/s br 85/81x2.0 62.0 90.0 6-9611 29 3872
Welding ends, 1.4301 (304) 45 W DIN65 70.0x2.0 AISI304 s br/s br 70/66x2.0 55.0 80.0 6-9611 29 3861
Semi bright
45 W DIN80 85.0x2.0 AISI304 s br/s br 85/81x2.0 62.0 90.0 6-9611 29 3871
312 2008/11
5. Integration components
Fittings / Sanitary fittings
ISO 2037
Integration components
2008/11 313
5. Integration components
Fittings / Sanitary fittings
DIN, Mat
Description Denomination A B C Part No.
1.4307 (304L) 15/10 AISI304 mat 15.0 9.0 16.0 6-9612 64 8546
Finish: Mat
20/10 AISI304 mat 19.0 9.0 25.0 6-9612 64 8547
20/15 AISI304 mat 25.0 9.0 29.5 6-9612 64 8548
25/10 AISI304 mat 25.0 15.0 17.0 6-9612 64 8549
25/15 AISI304 mat 25.0 19.0 19.5 6-9612 64 8550
25/20 AISI304 mat 31.0 15.0 22.0 6-9612 64 8551
32/15 AISI304 mat 31.0 19.0 22.0 6-9612 64 8552
32/20 AISI304 mat 31.0 25.0 20.0 6-9612 64 8553
32/25 AISI304 mat 37.0 15.0 45.0 6-9612 64 8554
40/15 AISI304 mat 37.0 19.0 33.5 6-9612 64 8555
40/20 AISI304 mat 37.0 19.0 33.5 6-9612 64 8556
40/25 AISI304 mat 37.0 25.0 28.0 6-9612 64 8557
40/32 AISI304 mat 37.0 31.0 28.0 6-9612 64 8558
50/25 AISI304 mat 49.0 25.0 44.0 6-9612 64 8559
50/32 AISI304 mat 49.0 31.0 32.0 6-9612 64 8560
50/40 AISI304 mat 49.0 37.0 37.0 6-9612 64 8561
65/25 AISI304 mat 66.0 25.0 58.5 6-9612 64 8562
65/32 AISI304 mat 66.0 31.0 52.0 6-9612 64 8563
65/40 AISI304 mat 66.0 37.0 38.0 6-9612 64 8564
65/50 AISI304 mat 66.0 49.0 31.0 6-9612 64 8565
80/25 AISI304 mat 81.0 25.0 89.5 6-9612 64 8566
80/32 AISI304 mat 81.0 31.0 83.0 6-9612 64 8567
80/40 AISI304 mat 81.0 37.0 61.0 6-9612 64 8568
80/50 AISI304 mat 81.0 49.0 31.5 6-9612 64 8569
Integration components
314 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4404 (316L) 15/10 AISI316L mat 15.0 9.0 16.0 6-9612 64 8646
Finish: Mat
20/10 AISI316L mat 19.0 9.0 25.0 6-9612 64 8647
20/15 AISI316L mat 19.0 15.0 17.0 6-9612 64 8648
25/10 AISI316L mat 25.0 9.0 29.5 6-9612 64 8649
25/15 AISI316L mat 25.0 15.0 17.0 6-9612 64 8650
25/20 AISI316L mat 25.0 19.0 19.5 6-9612 64 8651
32/15 AISI316L mat 31.0 15.0 22.0 6-9612 64 8652
32/20 AISI316L mat 31.0 19.0 22.0 6-9612 64 8653
32/25 AISI316L mat 31.0 25.0 20.0 6-9612 64 8654
40/15 AISI316L mat 37.0 15.0 45.0 6-9612 64 8655
40/20 AISI316L mat 37.0 19.0 33.5 6-9612 64 8656
40/25 AISI316L mat 37.0 25.0 28.0 6-9612 64 8657
40/32 AISI316L mat 37.0 31.0 28.0 6-9612 64 8658
50/25 AISI316L mat 49.0 25.0 44.0 6-9612 64 8659
50/32 AISI316L mat 49.0 31.0 32.0 6-9612 64 8660
50/40 AISI316L mat 49.0 37.0 37.0 6-9612 64 8661
65/25 AISI316L mat 66.0 25.0 58.5 6-9612 64 8662
65/32 AISI316L mat 66.0 31.0 52.0 6-9612 64 8663
65/40 AISI316L mat 66.0 37.0 38.0 6-9612 64 8664
65/50 AISI316L mat 66.0 49.0 31.0 6-9612 64 8665
80/25 AISI316L mat 81.0 25.0 89.5 6-9612 64 8666
80/32 AISI316L mat 81.0 31.0 83.0 6-9612 64 8667
80/40 AISI316L mat 81.0 37.0 61.0 6-9612 64 8668
80/50 AISI316L mat 81.0 49.0 31.5 6-9612 64 8669
80/65 AISI316L mat 81.0 66.0 31.5 6-9612 64 8670
Integration components
100/25 AISI316L mat 100.0 25.0 112.0 6-9612 64 8671
100/32 AISI316L mat 100.0 31.0 105.5 6-9612 64 8672
100/40 AISI316L mat 100.0 37.0 91.5 6-9612 64 8673
100/50 AISI316L mat 100.0 49.0 87.0 6-9612 64 8674
100/65 AISI316L mat 100.0 66.0 54.0 6-9612 64 8675
100/80 AISI316L mat 100.0 81.0 38.0 6-9612 64 8676
125/25 AISI316L mat 125.0 25.0 147.5 6-9612 64 8677
125/32 AISI316L mat 125.0 31.0 141.0 6-9612 64 8678
125/40 AISI316L mat 125.0 37.0 127.0 6-9612 64 8679
125/50 AISI316L mat 125.0 49.0 122.5 6-9612 64 8680
125/65 AISI316L mat 125.0 66.0 129.0 6-9612 64 8681
125/80 AISI316L mat 125.0 81.0 61.0 6-9612 64 8682
125/100 AISI316L mat 125.0 100.0 36.0 6-9612 64 8683
150/65 AISI316L mat 150.0 66.0 129.0 6-9612 64 8684
150/80 AISI316L mat 150.0 81.0 93.0 6-9612 64 8685
150/100 AISI316L mat 150.0 100.0 66.5 6-9612 64 8686
150/125 AISI316L mat 150.0 125.0 40.0 6-9612 64 8687
200/100 AISI316L mat 200.0 100.0 134.0 6-9612 64 8688
200/125 AISI316L mat 200.0 125.0 107.5 6-9612 64 8689
200/150 AISI316L mat 200.0 150.0 68.0 6-9612 64 8690
2008/11 315
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) 15/10 AISI304 semi bright 15.0 9.0 16.0 6-9612 64 8501
Finish
ID: Raw 20/10 AISI304 semi bright 19.0 9.0 25.0 6-9612 64 8502
OD: Semi bright 20/15 AISI304 semi bright 19.0 15.0 17.0 6-9612 64 8503
25/10 AISI304 semi bright 25.0 9.0 29.5 6-9612 64 8504
25/15 AISI304 semi bright 25.0 15.0 17.0 6-9612 64 8505
25/20 AISI304 semi bright 25.0 19.0 19.5 6-9612 64 8506
32/15 AISI304 semi bright 31.0 15.0 22.0 6-9612 64 8507
32/20 AISI304 semi bright 31.0 19.0 22.0 6-9612 64 8508
32/25 AISI304 semi bright 31.0 25.0 20.0 6-9612 64 8509
40/15 AISI304 semi bright 37.0 15.0 45.0 6-9612 64 8510
40/20 AISI304 semi bright 37.0 19.0 33.5 6-9612 64 8511
40/25 AISI304 semi bright 37.0 25.0 28.0 6-9612 64 8512
40/32 AISI304 semi bright 37.0 31.0 28.0 6-9612 64 8513
50/25 AISI304 semi bright 49.0 25.0 44.0 6-9612 64 8514
50/32 AISI304 semi bright 49.0 31.0 32.0 6-9612 64 8515
50/40 AISI304 semi bright 49.0 37.0 37.0 6-9612 64 8516
65/25 AISI304 semi bright 66.0 25.0 58.5 6-9612 64 8517
65/32 AISI304 semi bright 66.0 31.0 52.0 6-9612 64 8518
65/40 AISI304 semi bright 66.0 37.0 38.0 6-9612 64 8519
65/50 AISI304 semi bright 66.0 49.0 31.0 6-9612 64 8520
80/25 AISI304 semi bright 81.0 25.0 89.5 6-9612 64 8521
80/32 AISI304 semi bright 81.0 31.0 83.0 6-9612 64 8522
80/40 AISI304 semi bright 81.0 37.0 61.0 6-9612 64 8523
80/50 AISI304 semi bright 81.0 49.0 31.5 6-9612 64 8524
Integration components
316 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4404 (316L) 15/10 AISI316L semi bright 15.0 9.0 16.0 6-9612 64 8601
Finish:
ID: Raw 20/10 AISI316L semi bright 19.0 9.0 25.0 6-9612 64 8602
OD: Semi bright 20/15 AISI316L semi bright 19.0 15.0 17.0 6-9612 64 8603
25/10 AISI316L semi bright 25.0 9.0 29.5 6-9612 64 8604
25/15 AISI316L semi bright 25.0 15.0 17.0 6-9612 64 8605
25/20 AISI316L semi bright 25.0 19.0 19.5 6-9612 64 8606
32/15 AISI316L semi bright 31.0 15.0 22.0 6-9612 64 8607
32/20 AISI316L semi bright 31.0 19.0 22.0 6-9612 64 8608
32/25 AISI316L semi bright 31.0 25.0 20.0 6-9612 64 8609
40/15 AISI316L semi bright 37.0 15.0 45.0 6-9612 64 8610
40/20 AISI316L semi bright 37.0 19.0 33.5 6-9612 64 8611
40/25 AISI316L semi bright 37.0 25.0 28.0 6-9612 64 8612
40/32 AISI316L semi bright 37.0 31.0 28.0 6-9612 64 8613
50/25 AISI316L semi bright 49.0 25.0 44.0 6-9612 64 8614
50/32 AISI316L semi bright 49.0 31.0 32.0 6-9612 64 8615
50/40 AISI316L semi bright 49.0 37.0 37.0 6-9612 64 8616
65/25 AISI316L semi bright 66.0 25.0 58.5 6-9612 64 8617
65/32 AISI316L semi bright 66.0 31.0 52.0 6-9612 64 8618
65/40 AISI316L semi bright 66.0 37.0 38.0 6-9612 64 8619
65/50 AISI316L semi bright 66.0 49.0 31.0 6-9612 64 8620
80/25 AISI316L semi bright 81.0 25.0 89.5 6-9612 64 8621
80/32 AISI316L semi bright 81.0 31.0 83.0 6-9612 64 8622
80/40 AISI316L semi bright 81.0 37.0 61.0 6-9612 64 8623
80/50 AISI316L semi bright 81.0 49.0 31.5 6-9612 64 8624
80/65 AISI316L semi bright 81.0 66.0 31.5 6-9612 64 8625
Integration components
100/25 AISI316L semi bright 100.0 25.0 112.0 6-9612 64 8626
100/32 AISI316L semi bright 100.0 31.0 105.5 6-9612 64 8627
100/40 AISI316L semi bright 100.0 37.0 91.5 6-9612 64 8628
100/50 AISI316L semi bright 100.0 49.0 87.0 6-9612 64 8629
100/65 AISI316L semi bright 100.0 66.0 54.0 6-9612 64 8630
100/80 AISI316L semi bright 100.0 81.0 38.0 6-9612 64 8631
125/25 AISI316L semi bright 125.0 25.0 147.5 6-9612 64 8632
125/32 AISI316L semi bright 125.0 31.0 141.0 6-9612 64 8633
125/40 AISI316L semi bright 125.0 37.0 127.0 6-9612 64 8634
125/50 AISI316L semi bright 125.0 49.0 122.5 6-9612 64 8635
125/65 AISI316L semi bright 125.0 66.0 89.5 6-9612 64 8636
125/80 AISI316L semi bright 125.0 81.0 61.0 6-9612 64 8637
125/100 AISI316L semi bright 125.0 100.0 36.0 6-9612 64 8638
150/65 AISI316L semi bright 150.0 66.0 129.0 6-9612 64 8639
150/80 AISI316L semi bright 150.0 81.0 93.0 6-9612 64 8640
150/100 AISI316L semi bright 150.0 100.0 66.5 6-9612 64 8641
150/125 AISI316L semi bright 150.0 125.0 40.0 6-9612 64 8642
200/100 AISI316L semi bright 200.0 100.0 134.0 6-9612 64 8643
200/125 AISI316L semi bright 200.0 150.0 107.5 6-9612 64 8644
200/150 AISI316L semi bright 200.0 150.0 68.0 6-9612 64 8645
2008/11 317
5. Integration components
Fittings / Sanitary fittings
ISO 2037
1.4404 (316L) 38.0/25.0 AISI316L semi bright 22/22.6x1.2 38/35.9x1.2 44.0 6-31317 0896 1
Finish: Semi bright
51.0/25.0 AISI316L semi bright 25/22x1.2 51/48.6x1.2 86.0 6-31317 0896 2
1.4307 (304L) 15/10 AISI316L Mat 16.0 10.0 11.5 6-9612 64 8701
Finish: Mat
20/15 AISI304 Mat 20.0 16.0 9.0 6-9612 64 8702
318 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) 15/10 AISI304 semi bright 16.0 10.0 11.5 6-9612 64 8743
Finish
ID: Raw 20/15 AISI316L semi bright 20.0 16.0 9.0 6-9612 64 8744
OD: Semi bright
25/15 AISI304 semi bright 26.0 16.0 19.0 6-9612 64 8745
Integration components
150/100 AISI316L semi bright 150.0 100.0 98.5 6-9612 64 8762
2008/11 319
5. Integration components
Fittings / Sanitary fittings
5.3.1.9 T-pipes
1.4404 (316L) W ISO 38/25 AISI316L s br short 38/35.6x1.2 25/22.6x1.2 70.0 40.7 6-31801 9039 1
Finish: Polished
W ISO 51/25 AISI316L s br short 51/48.6x1.2 25/22.6x1.2 82.0 54.1 6-31801 9039 2
W ISO 51/38 AISI316L s br short 51/48.6x1.2 38/35.6x1.2 82.0 54.1 6-31801 9039 3
W ISO 63.5/25 AISI316L s br short 63.5/61.1x1.2 25/21.8x1.6 105.0 66.5 6-31801 9039 4
W ISO 63.5/38 AISI316L s br short 63.5/61.1x1.2 38/34.8x1.6 105.0 67.6 6-31801 9039 5
W ISO 63.5/51 AISI316L s br short 63.5/61.1x1.2 51/47.8x1.6 105.0 66.5 6-31801 9039 6
W ISO 76.1/25 AISI316L s br short 76.1/73.7x1.6 25/31x2.0 110.0 79.3 6-31801 9039 7
W ISO 76.1/38 AISI316L s br short 76.1/73.7x1.6 38/34x2.0 110.0 80.6 6-31801 9039 8
W ISO 76.1/51 AISI316L s br short 76.1/73.7x1.6 51/47x2.0 110.0 80.6 6-31801 9039 9
W ISO 76.1/63.5 AISI316L s br short 76.1/72.9x1.6 63.5/59.5x2.0 110.0 80.0 6-31801 9040 1
W ISO 101.6/25 AISI316L s br short 101.6/99.2x1.2 25/21x2.0 150.0 105.0 6-31801 9040 2
W ISO 101.6/38 AISI316L s br short 101.6/99.2x1.2 38/34x2.0 150.0 106.6 6-31801 9040 3
W ISO 101.6/51 AISI316L s br short 101.6/99.2x1.2 51/47x2.0 150.0 106.6 6-31801 9040 4
W ISO 101.6/63.5 AISI316L s br short 101.6/98.4x1.6 63.5/59.5x2.0 150.0 106.6 6-31801 9040 5
W ISO 101.6/76.1 AISI316L s br short 101.6/98.4x1.6 76.1/72.1x2.0 150.0 106.6 6-31801 9040 6
ISO 2037
Integration components
1.4307 (304L) T-pipe W ISO25.0 AISI304 semi bright 25/22.6x1.2 55.0 6-190725 00
Finish: Polished
T-pipe W ISO38.0 AISI304 semi bright 38/35.6x1.2 70.0 6-190727 00
1.4404 (316L) T-pipe W ISO25.0 AISI316L semi bright 25/22.6x1.2 55.0 6-191652 00
Finish: Polished
T-pipe W ISO38.0 AISI316L semi bright 38/35.6x1.2 70.0 6-191654 00
320 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) T-pipe W ISO25.0 AISI304 semi br short 22/22.6x1.2 55.0 27.0 6-9611 30 2052
Finish: Polished
T-pipe W ISO38.0 AISI304 semi br short 38/35.6x1.2 70.0 40.5 6-9611 30 2053
T-pipe W ISO51.0 AISI304 semi br short 51/48.6x1.2 82.0 54.5 6-9611 30 2054
T-pipe W ISO63.5 AISI304 semi br short 63.5/60.3x1.6 105.0 67.0 6-9611 30 2055
T-pipe W ISO76.1 AISI304 semi br short 76.1/72.1x2.0 110.0 81.0 6-9611 30 2056
T-pipe W ISO101.6 AISI304 semi br short 101.6/97.6x2.0 150.0 107.0 6-9611 30 2057
1.4404 (316L) T-pipe W ISO25.0 AISI316L semi br short 25/22.6x1.2 55.0 27.0 6-9611 30 2155
Finish: Polished
T-pipe W ISO38.0 AISI316L semi br short 38/35.6x1.2 70.0 40.5 6-9611 30 2156
T-pipe W ISO51.0 AISI316L semi br short 51/48.6x1.2 82.0 54.5 6-9611 30 2157
T-pipe W ISO63.5 AISI316L semi br short 63.5/60.3x1.6 105.0 67.0 6-9611 30 2158
T-pipe W ISO76.1 AISI316L semi br short 76.1/72.1x2.0 110.0 81.0 6-9611 30 2159
T-pipe W ISO101.6 AISI316L semi br short 101.6/97.6x2.0 150.0 107.0 6-9611 30 2160
1.4404 (316L) T-pipe W ISO51.0/38.0 AISI316L semi br l 51/48.6x1.2 38/35.6x1.2 82.0 70.0 6-31317 0806 1
Finish: Polished
T-pipe W ISO63.5/38.0 AISI316L semi br l 63.5/60.3x1.6 38/35.6x1.2 105.0 70.0 6-31317 0807 1
T-pipe W ISO63.5/51.0 AISI316L semi br l 63.5/60.3x1.6 51/48.6x1.2 105.0 82.0 6-31317 0808 1
Integration components
T-pipe W ISO76.1/38.0 AISI316L semi br l 76.1/72.1x2.0 38.1/34.9x1.6 110.0 80.0 6-31317 0809 1
T-pipe W ISO76.1/51.0 AISI316L semi br l 76.1/72.1x2.0 50.8/47.6x1.6 110.0 82.0 6-31317 0810 1
1.4307 (304L) W DIN10 12.0x1.5 AISI304 semi bright 12/9x1.5 26.0 6-9611 30 9220
Finish: Polished
W DIN15 18.0x1.5 AISI304 semi bright 18/15x1.5 35.0 6-9611 30 9230
2008/11 321
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) W DIN10 12.0x1.5 AISI304 mat 12/9x1.5 26.0 6-9611 30 9222
Finish: Mat
W DIN15 18.0x1.5 AISI304 mat 18/15x1.5 35.0 6-9611 30 9232
1.4404 (316L) W DIN10 12.0x1.5 AISI316L mat 12/9x1.5 26.0 6-9611 30 9223
Finish: Mat
W DIN15 18.0x1.5 AISI316L mat 18/15x1.5 35.0 6-9611 30 9233
1.4404 (316L) W DIN10 12.0x1.5 AISI316L semi bright 12/9x1.5 26.0 6-9611 30 9221
Finish: Polished
W DIN15 18.0x1.5 AISI316L semi bright 18/15x1.5 35.0 6-9611 30 9231
322 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) W DIN10 13.0x1.5 AISI304 semi bright 13/10x1.5 26.0 6-9612 15 5558
Finish: Polished
W DIN15 19.0x1.5 AISI304 semi bright 19/16x1.5 35.0 6-9612 15 5559
1.4307 (304L) W DIN10 13.0x1.5 AISI304 mat 13/10x1.5 26.0 6-9612 15 5565
Finish: Mat
W DIN15 19.0x1.5 AISI304 mat 19/16x1.5 35.0 6-9612 15 5566
Integration components
W DIN50 53.0x1.5 AISI304 mat 53/50x1.5 70.0 6-9612 15 5571
2008/11 323
5. Integration components
Fittings / Sanitary fittings
1.4404 (316L) W DIN10 13.0x1.5 AISI316L semi bright 13/10x1.5 26.0 6-9612 15 5508
Finish: Polished
W DIN15 19.0x1.5 AISI316L semi bright 19/16x1.5 35.0 6-9612 15 5509
1.4404 (316L) W DIN10 13.0x1.5 AISI316L mat 13/10x1.5 26.0 6-9612 15 5527
Finish: Mat
W DIN15 19.0x1.5 AISI316L mat 19/16x1.5 35.0 6-9612 15 5528
324 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4301 (304) W DIN25 AISI304 semi bright short 28/25x1.5 50.0 15.5 6-9612 15 0004
Finish: Polished
W DIN32 AISI304 semi bright short 34/31x1.5 55.0 18.5 6-9612 15 0005
W DIN40 AISI304 semi bright short 40/37x1.5 60.0 21.5 6-9612 15 0006
W DIN50 AISI304 semi bright short 52/49x1.5 70.0 29.5 6-9612 15 0007
1.4404 (316L) W DIN25 AISI316L semi bright short 28/25x1.5 50.0 15.5 6-9612 15 0032
Finish: Polished
W DIN32 AISI316L semi bright short 34/31x1.5 55.0 18.5 6-9612 15 0033
W DIN40 AISI316L semi bright short 40/37x1.5 60.0 21.5 6-9612 15 0034
W DIN50 AISI316L semi bright short 52/49x1.5 70.0 29.5 6-9612 15 0035
1.4301 (304) W DIN25 AISI304 mat short 28/25x1.5 50.0 15.5 6-9612 15 0011
Finish: Mat
W DIN32 AISI304 mat short 34/31x1.5 55.0 18.5 6-9612 15 0012
1.4404 (316L) W DIN25 AISI316L mat short 28/25x1.5 50.0 15.5 6-9612 15 0044
Finish: Mat
W DIN32 AISI316L mat short 34/31x1.5 55.0 18.5 6-9612 15 0045
Integration components
Description Denomination OD/IDxt L1 L2 Part No.
1.4307 (304L) W DIN65 AISI304 semi bright short 70/66x2.0 80.0 40.0 6-9611 30 4580
Finish: Polished
W DIN80 AISI304 semi bright short 85/81x2.0 90.0 45.5 6-9611 30 4600
W DIN100 AISI304 semi bright short 104/100x2.0 100.0 58.5 6-9611 30 4620
W DIN125 AISI304 semi bright short 129/125x2.0 187.5 71.5 6-9611 30 4640
W DIN150 AISI304 semi bright short 154/150x2.0 225.0 87.0 6-9612 15 0053
1.4404 (316L) W DIN65 AISI316L semi bright short 70/66x2.0 80.0 40.0 6-9611 30 4582
Finish: Polished
W DIN80 AISI316L semi bright short 85/81x2.0 90.0 45.5 6-9611 30 4602
W DIN100 AISI316L semi bright short 104/100x2.0 100.0 58.5 6-9611 30 4622
W DIN125 AISI316L semi bright short 129/125x2.0 187.5 71.5 6-9611 30 4642
W DIN150 AISI316L semi bright short 154/150x2.0 225.0 87.0 6-9612 15 0040
2008/11 325
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) W DIN65 AISI304 mat short 70/66x2.0 80.0 40.0 6-9611 30 4581
Finish: Mat
W DIN80 AISI304 mat short 85/81x2.0 90.0 45.5 6-9611 30 4601
1.4404 (316L) W DIN65 AISI316L mat short 70/66x2.0 80.0 40.0 6-9611 30 4583
Finish: Mat
W DIN80 AISI316L mat short 85/81x2.0 90.0 45.5 6-9611 30 4603
Reduced - DIN
1.4404 (316L) W DIN32/25 AISI316L semi bright 34/31x1.5 28/25x1.5 55.0 6-9612 15 7434
Finish: Polished
W DIN40/25 AISI316L semi bright 40/34x1.5 28/25x1.5 60.0 6-9612 15 7435
1.4404 (316L) W DIN32/25 AISI316L mat 34/31x1.5 28/25x1.5 55.0 6-9612 15 7423
Finish: Mat
W DIN40/25 AISI316L mat 40/37x1.5 28/25x1.5 60.0 6-9612 15 7424
326 2008/11
5. Integration components
Fittings / Sanitary fittings
5.3.1.10 Blanks
SMS seal
Integration components
GC-Clamp-3A,AISI 316L- 4" 118.9 6.4 6-9611 34 0604
2008/11 327
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) DIN10 AISI304 semi bright 22.5 6.0 18.0 9.0 6-9611 30 6470
Finish: Semi bright
DIN15 AISI304 semi bright 28.0 6.0 24.0 9.0 6-9611 30 6480
DIN20 AISI304 semi bright 36.5 8.0 30.0 11.0 6-9611 29 1111
DIN25 AISI304 semi bright 44.0 10.0 35.0 13.0 6-31318 0035 1
DIN32 AISI304 semi bright 50.0 10.0 41.0 13.0 6-31318 0035 2
DIN40 AISI304 semi bright 56.0 10.0 48.0 13.0 6-31318 0035 3
DIN50 AISI304 semi bright 68.5 11.0 61.0 14.0 6-31318 0035 4
DIN65 AISI304 semi bright 86.0 12.0 79.0 16.0 6-31318 0035 5
DIN75 AISI304 semi bright 93.7 12.0 86.0 16.0 6-9611 30 6490
DIN80 AISI304 semi bright 100.0 12.0 93.0 16.0 6-31318 0035 6
DIN100 AISI304 semi bright 121.0 15.0 114.0 20.0 6-31318 0035 8
DIN125 AISI304 semi bright 150.0 17.0 137.0 22.0 6-9611 30 6500
DIN150 AISI304 semi bright 176.0 18.0 163.0 24.0 6-9611 30 6510
Integration components
328 2008/11
5. Integration components
Fittings / Sanitary fittings
SMS seal
1.4301 (304) SMS25 AISI304 w chain 51.0 20.0 40x1/6 6.5 6-9612 14 5101
Finish: Semi bright
SMS38 AISI304 w chain 74.0 25.0 60x1/6 6.5 6-9612 14 5102
1.4301 (304) DIN10 AISI304 chain semi bright 38.0 18.0 28x1/8 8.0 6-9611 29 1411
Finish: Semi bright
Gasket: NBR DIN15 AISI304 chain semi bright 44.0 18.0 34x1/8 8.0 6-9611 29 1421
DIN20 AISI304 chain semi bright 54.0 21.0 44x1/6 8.0 6-9611 29 1431
DIN25 AISI304 chain semi bright 63.0 21.0 52x1/6 8.0 6-9611 29 1441
DIN32 AISI304 chain semi bright 70.0 21.0 58x1/6 8.0 6-9611 29 1451
DIN40 AISI304 chain semi bright 78.0 21.0 65x1/6 8.0 6-9611 29 1461
DIN50 AISI304 chain semi bright 92.0 22.0 78x1/6 8.0 6-9611 29 1471
Integration components
DIN65 AISI304 chain semi bright 112.0 25.0 95x1/6 8.0 6-9611 29 1481
DIN80 AISI304 chain semi bright 127.0 29.0 110x1/4 8.0 6-9611 29 1491
DIN100 AISI304 chain semi bright 148.0 31.0 130x1/4 8.0 6-9611 29 1511
DIN125 AISI304 chain semi bright 178.0 34.0 160x1/4 8.0 6-9611 29 1521
DIN150 AISI304 chain semi bright 210.0 40.0 190x1/4 8.0 6-9611 29 1531
2008/11 329
5. Integration components
Fittings / Sanitary fittings
SMS seal
1.4307 (304L) SMS25.0 W AISI304 s br. Nitrile 25/22x1.2 51.0 23.5 6-9611 30 0382
Finish: Semi bright
Seals: Nitrile (NBR) SMS38.0 W AISI304 s br. Nitrile 38/35.6x1.2 74.0 30.0 6-9611 30 0383
1.4404 (316L) SMS25 W AISI316L s br. Nitrile 25/22.6x1.2 51.0 23.5 6-9611 33 0382
Finish: Semi bright
Seals: Nitrile (NBR) SMS38 W AISI316L s br. Nitrile 38/35.6x1.2 74.0 30.0 6-9611 33 0383
330 2008/11
5. Integration components
Fittings / Sanitary fittings
1.4307 (304L) DIN10 W AISI304 s br. short Nitrile 13/10x1.5 38.0 25.0 6-9611 30 5790
Finish: Semi bright
Seals: Nitrile (NBR) DIN20 W AISI304 s br. short Nitrile 23/20x1.5 54.0 25.0 6-9611 29 0011
DIN25 W AISI304 s br. short Nitrile 29/26x1.5 63.0 31.0 6-9611 30 1119
DIN32 W AISI304 s br. short Nitrile 35/32x1.5 70.0 31.0 6-9611 30 1120
DIN40 W AISI304 s br. short Nitrile 41/38x1.5 78.0 31.0 6-9611 30 1121
DIN50 W AISI304 s br. short Nitrile 53/50x1.5 92.0 33.0 6-9611 30 1122
DIN65 W AISI304 s br. short Nitrile 70/66x2.0 112.0 35.0 6-9611 30 1123
DIN80 W AISI304 s br. short Nitrile 85/81x2.0 127.0 35.0 6-9611 30 1124
DIN100 W AISI304 s br. short Nitrile 104/100x2.0 148.0 41.0 6-9611 30 1126
1.4404 (316L) DIN10 W AISI316L s br. short Nitrile 13/10x1.5 38.0 25.0 6-9611 30 5791
Finish: Semi bright
Seals: Nitrile (NBR) DIN20 W AISI316L s br. short Nitrile 23/20x1.5 54.0 25.0 6-9611 29 0012
DIN25 W AISI316L s br. short Nitrile 29/26x1.5 63.0 31.0 6-9611 33 1119
DIN32 W AISI316L s br. short Nitrile 35/32x1.5 70.0 31.0 6-9611 33 1120
DIN40 W AISI316L s br. short Nitrile 41/38x1.5 78.0 31.0 6-9611 33 1121
DIN50 W AISI316L s br. short Nitrile 53/50x1.5 92.0 33.0 6-9611 33 1122
DIN65 W AISI316L s br. short Nitrile 70/66x2.0 112.0 35.0 6-9611 33 1123
DIN80 W AISI316L s br. short Nitrile 85/81x2.0 127.0 35.0 6-9611 33 1124
DIN100 W AISI316L s br. short Nitrile 104/100x2.0 148.0 41.0 6-9611 33 1126
Integration components
2008/11 331
5. Integration components
Fittings / Sanitary fittings
Clamp
1.4301 (304) A13MHM-1 1/2-S Clamp Assembly 25/38 25/40 90.9 63.8 54.0 6-2110 53
332 2008/11
5. Integration components
Fittings / Sanitary fittings
Integration components
1.4404 (316L) Cl25 AISI316L 25.6/22.6x1.5 50.5 21.5 6-9611 31 0190
Semi bright
Cl38 AISI316L 38.6/35.6x1.5 50.5 21.5 6-9611 31 0200
2008/11 333
5. Integration components
Fittings / Sanitary fittings
334 2008/11
5. Integration components
Fittings / Non-sanitary fittings
Accessories
Flange seals
See "Seals"
DN32 42.4x2.6 PN16 42.4 140 100 40 2.6 78 4x18 M16 6-990006 03
DN40 48.3x2.6 PN16 48.3 150 110 42 2.6 88 4x18 M16 6-990006 04
DN50 60.3x2.9 PN16 60.3 165 125 45 2.9 102 4x18 M16 6-990006 05
DN65 76.1x2.9 PN16 76.1 185 145 45 2.9 122 4x18 M16 6-990006 06
Integration components
DN80 88.9x3.2 PN16 88.9 200 160 50 3.2 138 8x18 M16 6-990006 07
DN100 114.3x3.6 PN16 114.3 220 180 52 3.6 158 8x18 M16 6-990006 09
DN32 42.4x2.6 PN40 42.4 140 100 42 2.6 78 4x18 M16 6-31801 9711 4
DN40 48.3x2.6 PN40 48.3 150 110 45 2.6 88 4x18 M16 6-31801 9711 5
DN50 60.3x2.9 PN40 60.3 165 125 48 2.9 102 4x18 M16 6-31801 9711 6
DN65 76.1x2.9 PN40 76.1 185 145 52 2.9 122 8x18 M16 6-990451 79
DN80 88.9x3.2 PN40 88.9 200 160 58 3.2 138 8x18 M16 6-990451 80
DN100 114.3x3.6 PN40 114.3 235 190 65 3.6 162 8x22 M20 6-990451 81
2008/11 335
5. Integration components
Fittings / Non-sanitary fittings
150 lbs 1" 316 ANSI B 16.5 Class 150 33.4 108 79.2 55.6 1.6 50.8 15.7 1/2" 6-32451 0116 1
According to ANSI B 16.5
class 150 1 1/2" 316 ANSI B 16.5 Class 150 48.3 127 98.6 62 1.6 73.2 15.7 1/2" 6-32451 0116 2
Material: AISI 316L
Nominal pressure: 150 lbs 2" 316 ANSI B 16.5 Class 150 60.3 152.4 121 63.5 1.6 91.9 19.1 5/8" 6-32451 0116 3
2 1/2" 316 ANSI B 16.5 Class 150 73 177.8 140 69.9 1.6 104.6 19.1 5/8" 6-32451 0116 4
3" 316 ANSI B 16.5 Class 150 88.9 190.5 152 69.9 1.6 127 19.1 5/8" 6-32451 0116 5
4" 316 ANSI B 16.5 Class 150 114.3 228.6 191 76.2 1.6 157.2 19.1 5/8" 6-32451 0116 6
Integration components
336 2008/11
5. Integration components
Fittings / Non-sanitary fittings
Hose nipples
Integration components
2008/11 337
5. Integration components
Fittings / Non-sanitary fittings
Welding bend
338 2008/11
5. Integration components
Fittings / Non-sanitary fittings
Concentric reducer
Integration components
114.3x88.9x2mm L=75 1.4404 6-990451 77
2008/11 339
5. Integration components
Fittings / Non-sanitary fittings
5.3.2.5 T-pipe
T-pipe
340 2008/11
5. Integration components
Other Components / Non-sanitary fittings
Integration components
2008/11 341
5. Integration components
Other Components / Sanitary
5.4.1 Sanitary
LKGG-1
342 2008/11
5. Integration components
Other Components / Sanitary
Application
In-line mixing of fluid, viscous and particulate products, such as sugar solution into juice, fruit into yoghurt and
diced carrots and peas. Equalising of temperature of two mixed viscous products having different temperatures.
Installation
The mixer should normally be installed vertically with inlet at the bottom for proper function. For more capacity, use
several mixers. As option they can be delivered with a frame.
Options
More than one mixer might be required to reach the requested mixing degree.
Contact your local Tetra Pak representative to get more information about sizing and options.
Tetra Aline
Integration components
2008/11 343
5. Integration components
Other Components / Sanitary
5.4.1.3 Filters
LKIF - Clamp
LKIF - DS/SMS
344 2008/11
5. Integration components
Other Components / Sanitary
5.4.1.4 Strainers
LKSF-BL
Slot
Description Denomination OD1/ID1xt1 OD2/ID2xt2 A2 B2 Part No.
size
Welding ends LKSF-BL-W-38-74 micron EPDM 74 38.1/34.9x1.6 38/35.6x1.2 808 712 6-9612 92 6650
Material: 1.4401 (316)
Seals: EPDM LKSF-BL-W-38-105 micron EPDM 105 38.1/34.9x1.6 38/35.6x1.2 808 712 6-9612 92 6651
Connections: Welding ends
Strainer element with 74, 105, LKSF-BL-W-38-177 micron EPDM 177 38.1/34.9x1.6 38/35.6x1.2 808 712 6-9612 92 6652
177 or 500 micron slot size
included LKSF-BL-W-38-500 micron EPDM 500 38.1/34.9x1.6 38/35.6x1.2 808 712 6-9612 92 6653
LKSF-BL-W-51-105 micron EPDM 105 50.8/47.6x1.6 51/47.8x1.6 766 670 6-9612 92 6658
LKSF-BL-W-51-177 micron EPDM 177 50.8/47.6x1.6 51/47.8x1.6 766 670 6-9612 92 6659
LKSF-BL-W-51-500 micron EPDM 500 50.8/47.6x1.6 51/47.8x1.6 766 670 6-9612 92 6660
LKSF-BL-W-63.5-105 micron EPDM 105 63.5/60.3x1.6 63.5/60.3x1.6 727 631 6-9612 92 6665
LKSF-BL-W-63.5-177 micron EPDM 177 63.5/60.3x1.6 63.5/60.3x1.6 727 631 6-9612 92 6666
LKSF-BL-W-63.5-500 micron EPDM 500 63.5/60.3x1.6 63.5/60.3x1.6 727 631 6-9612 92 6667
LKSF-BL-W-76.1-105 micron EPDM 105 76.2/73x1.6 76.1/72.1x2.0 688 592 6-9612 92 6672
LKSF-BL-W-76.1-177 micron EPDM 177 76.2/73x1.6 76.1/72.1x2.0 688 592 6-9612 92 6673
LKSF-BL-W-76.1-500 micron EPDM 500 76.2/73x1.6 76.1/72.1x2.0 688 592 6-9612 92 6674
Integration components
LKSF-BL-W-101.6-105 micron EPDM 105 101.6/97.6x1.6 101.6/97.6x2.0 683 583 6-9612 92 6679
LKSF-BL-W-101.6-177 micron EPDM 177 101.6/97.6x1.6 101.6/97.6x2.0 683 583 6-9612 92 6680
LKSF-BL-W-101.6-500 micron EPDM 500 101.6/97.6x1.6 101.6/97.6x2.0 683 583 6-9612 92 6681
2008/11 345
5. Integration components
Other Components / Sanitary
LKVF
346 2008/11
5. Integration components
Other Components / Sanitary
5.4.1.5 Sprayballs
LKRK
Diameter = 94 mm LKRK-2F for pipe DIN 50 D=94mm 77.5 22.5 52.4 6-9611 71 0973
Finish: Bright
Material: 1.4404 (316L) LKRK-2F for pipe ISO 51 D=94mm 77.5 22.5 51.4 6-9611 71 0971
Fully drilled with 2 mm holes
Diameter = 64 mm LKRK-2F for pipe DIN 25 D=64mm 58 17.5 28.5 6-9611 71 0872
Finish: Bright
Material: 1.4404 (316L) LKRK-2F for pipe ISO 25 D=64mm 58 17.5 25.5 6-9611 71 0871
Fully drilled with 2 mm holes
Integration components
2008/11 347
5. Integration components
Other Components / Sanitary
TJ 20G
Application
For storage tanks and vessels between 15 and 150 m3.
Technical data
Materials: 1.4404, SAF 2205, UNS S 21800, EPDM, PEEK, PVDF, PFA
External surface finish: Ra = 0.5 µm
Weight: 5.1 kg
Working pressure: 3-8 bar
Recommended pressure: 4-7 bar
Max. working temperature: 95ºC
Max. ambient temperature: 140ºC
Max throw length: 9-14 m
Impact throw lenght: 4-8 m
TZ-74
Application
For storage tanks and vessels between 50 and 500 m3.
Technical data
Materials: 1.4404, PTFE, PEEK, Tefzel, TFM
External surface finish: Ra = 0.5 µm
Weight: 6.1 kg
Working pressure: 3-12 bar
Recommended pressure: 5-6.5 bar
Max. working temperature: 95ºC
Max. ambient temperature: 140ºC
Integration components
348 2008/11
5. Integration components
Other Components / Sanitary
TJ 20G
M3/h -
Description Denomination No. A C E F Part No.
5 bar
Integration components
2008/11 349
5. Integration components
Other Components / Sanitary
TZ-74
M3/h -
Description Denomination No. A C E F Part No.
5 bar
1 1/2" BSP TZ-74 1½ BSP 100% 4X6 TE21D208 14 297 50 16 152 90503-6502
1 1/2" NPT TZ-74 1½ NPT 100% 4X6 TE21D108 14 297 50 16 152 90503-6498
350 2008/11
5. Integration components
Other Components / Sanitary
Midget MiniFlow
m3/h -
Description Denomination No. Type A B Part No.
2 bar
Threaded BSP Midget MiniFlow 1/2" BSP TE10A02001 2.7 360º 90 35 90503-6135
Surface finish: Bright
Material inlet connection: Midget MiniFlow 3/4" BSP TE10A02101 2.7 360º 90 35 6-9612 99 1720
1.4404 (316L)
Material head: 1.4404 (316L)
Material balls: 1.4404 (316L)
SaniMidget Clip-on
m3/h -
Description Denomination No. Type A B ID Part No.
2 bar
Clip-on SaniMidget Clip-on ISO 360° TE10B10001 6 360º 133.5 45 25.3 6-9612 99 1949
Surface finish: Bright
Material inlet connection: SaniMidget Clip-on ISO 25.3 TE10B12001 4 180ºD 133.5 45 25.3 6-9612 99 1950
1.4404 (316L)
Material head: 1.4404 (316L) SaniMidget Clip-on ISO 25.3 TE10B13001 6.5 270ºU 133.5 45 25.3 6-9612 99 1951
Material balls: 1.4401 (316)
Integration components
2008/11 351
5. Integration components
Other Components / Sanitary
SaniMidget Weld-on
m3/h -
Description Denomination No. Type A B OD/IDxt Part No.
2 bar
SaniMidget Threaded
m3/h -
Description Denomination No. Type A B Part No.
2 bar
Threaded SaniMidget 3/4" BSP TE10B00101 5.5 360º 102 45 6-9612 99 2025
Integration components
352 2008/11
5. Integration components
Other Components / Sanitary
SaniMagnum Clip-on
m3/h -
Description Denomination No. Type A B ID Part No.
2 bar
Clip-on SaniMagnum Clip-on 1 1/2" TE11B100 16.5 360º 161.5 65 38.4 6-9612 99 1858
Surface finish: Bright
Material inlet connection: SaniMagnum Clip-on 1 1/2" TE11B130 16.5 270ºU 161.5 65 38.4 6-9612 99 1861
1.4404 (316L)
Material head: 1.4404 (316L) SaniMagnum Clip-on 2" TE11B104 16.5 360º 161.5 65 51.3 6-9612 99 1866
Material balls: 1.4401 (316)
SaniMagnum Weld-on
m3/h -
Description Denomination No. Type A B OD/IDxt Part No.
2 bar
Integration components
2008/11 353
5. Integration components
Other Components / Sanitary
SaniMagnum Threaded
m3/h -
Description Denomination No. Type A B Part No.
2 bar
MultiMidget Clip-on
m3/h -
Description Denomination No. Type A B ID Part No.
2 bar
Clip-on MultiMidget Clip-on 1" TE10M100 6 360º 155 45 25.6 6-9612 99 1765
Surface finish: Bright
Material inlet connection:
1.4404 (316L)
Material head: 1.4404 (316L)
Material balls: 1.4401 (316)
Integration components
354 2008/11
5. Integration components
Other Components / Sanitary
MultiMidget Weld-on
m3/h -
Description Denomination No. Type A B OD/IDxt Part No.
2 bar
Weld-on MultiMidget W 1" TE10M200 5.5 360º 500 45 25/21x1.6 6-9612 99 1773
Surface finish: Bright
Material inlet connection:
1.4404 (316L)
Material head: 1.4404 (316L)
Material balls: 1.4401 (316)
MultiMidget Threaded
Integration components
m3/h -
Description Denomination No. Type A B Part No.
2 bar
Threaded MultiMidget 3/4" BSP TE10M001 5.5 360º 137 45 6-9612 99 1789
Surface finish: Bright
Material inlet connection: MultiMidget 3/4" NPT TE10M003 5.5 360º 137 45 6-9612 99 1793
1.4404 (316L)
Material head: 1.4404 (316L)
Material balls: 1.4401 (316)
2008/11 355
5. Integration components
Other Components / Sanitary
MultiMagnum Clip-on
m3/h -
Description Denomination No. Type A B ID Part No.
2 bar
MultiMagnum Weld-on
m3/h -
Description Denomination No. Type A B OD/IDxt Part No.
2 bar
356 2008/11
5. Integration components
Other Components / Sanitary
MultiMagnum Threaded
m3/h -
Description Denomination No. Type A B Part No.
2 bar
Integration components
2008/11 357
5. Integration components
Other Components / Sanitary
Application
Holding a product at a steady temperature for a specific time.
Working principle
The product flows through the spiral holding tube with a negligible temperature loss. The time for passing through
the tube depends on the volume of the tube and the flow rate.
Features
-Tube volume: 23-2900 liter
-Tube size: 38-76 mm
-Height: 1.0-2.7 m
358 2008/11
5. Integration components
Other Components / Non sanitary
S1
S1 Threaded S1 1/2" BSP GGG-40 PN16 124 225 86 88 1/2" 1" 2.7 0.53 l 6-31801 5425 1
Material: SG Iron
Connection: BSP or NPT S1 1/2" NPT GGG-40 PN16 124 225 86 88 1/2" 1" 2.7 0.53 l 90510-3561
S5 and S7
S5 Flanged S5 DN15 CS BS4504(DIN) PN40 292 162 204 1/2" 1" 4.5 0.85 l 6-31801 9821 1
Material: Carbon Steel
Connection: Flanges EN 1092 S5 DN20 CS BS4504(DIN) PN40 345 158 212 1/2" 1" 5.0 1.03 l 6-31801 9821 2
S5 DN25 CS BS4504(DIN) PN40 387 184 260 1/2" 1" 9.5 2.60 l 6-31801 9821 3
S5 DN40 CS BS4504(DIN) PN40 508 221 310 1" 1" 27.0 7.90 l 6-31801 9821 5
S5 DN50 CS BS4504(DIN) PN40 558 221 310 1" 1" 29.0 8.70 l 6-31801 9821 6
Integration components
S7 S7 DN65 CS BS4504(DIN) PN40 638 252 420 3/4" 1" 49 18 l 90511-1331
Material: Carbon Steel
Connection: Flanges EN 1092 S7 DN80 CS BS4504(DIN) PN40 735 332 523 3/4" 2" 88 33 l 90511-1332
S7 DN100 CS BS4504(DIN) PN40 795 337 574 3/4" 2" 106 51 l 6-31801 9821 9
2008/11 359
5. Integration components
Other Components / Non sanitary
S6 and S8
S6 Flanged S6 DN15 AISI316L BS4504(DIN) PN40 292 162 1" 204 1/2" 4.5 0.85 l 6-31801 9826 1
Material: Body = 316L / Flange
and cover = 316L S6 DN20 AISI316L BS4504(DIN) PN40 345 158 1" 212 1/2" 5.0 1.03 l 6-31801 9826 2
Connection: Flanges EN 1092
S6 DN25 AISI316L BS4504(DIN) PN40 387 184 1" 260 1/2" 9.5 2.60 l 6-31801 9826 3
S6 DN40 AISI316L BS4504(DIN) PN40 508 221 1" 310 1" 27.0 7.90 l 6-31801 9826 5
S6 DN50 AISI316L BS4504(DIN) PN40 558 221 1" 310 1" 29.0 8.70 l 6-31801 9826 6
S8 Flanged S8 DN65 AISI316L BS4504(DIN) PN40 638 252 1" 420 3/4" 47 18 l 90511-1329
Material: Body = 316L / Flange
and cover = 316L S8 DN80 AISI316L BS4504(DIN) PN40 735 332 2" 523 3/4" 64 34l 90511-1330
Connection: Flanges EN 1092
S8 DN100 AISI316L BS4504(DIN) PN40 795 337 2" 574 3/4" 88 53 l 90510-9516
Integration components
S13
S13 Flanged S13 DN40 GGG-40 BS4504(DIN) PN16 1/2" 365 94 14 90503-7756
Material body: SG iron
Connection: Flange EN 1092 S13 DN50 GGG-40 BS4504(DIN) PN16 1/2" 456 98 25 90503-7757
360 2008/11
5. Integration components
Other Components / Non sanitary
FT14 ENP FT14-4.5 R-L, G1/2" PN16 121 107 67 147 2.9 6-31801 5045 5
Connection: BSP threaded
Body outside surface: Electro FT14-4.5 R-L, G3/4" PN16 121 107 67 147 2.9 6-31801 5045 1
Nickel Plated
Material body: SG or Cast Iron FT14-10 R-L DN15 1/2" PN16 121 107 67 147 2.9 6-31801 5046 5
Material inserts: Stainless
Steel FT14-10 R-L, DN20 G3/4" PN16 121 107 67 147 2.9 6-31801 5046 1
FT14 FT14-4.5 1/2" NPT PN16 121 107 67 147 2.9 90503-7742
Connection: NPT threaded
Body outside surface: Painted FT14-4.5 1" NPT PN16 145 107 75 166 4.0 90503-7743
black
Material body: SG or Cast Iron
Material inserts: Stainless
Steel
Integration components
2008/11 361
5. Integration components
Other Components / Non sanitary
FT14HC FT14-4.5 HC, G1" PN25 120 110 80 160 220 6.8 6-31801 5045 2
Connection: BSP or NPT
threaded FT14-10 HC, DN25 G1" PN25 120 110 80 160 220 6.8 6-31801 5046 2
Body outside surface: Painted
black FT14-4.5 HC, 1" NPT PN25 120 110 80 160 220 6.8 90510-1990
Material body: SG or Cast Iron
Material inserts: Stainless FT14-10 HC, 1" NPT PN25 120 110 80 160 220 6.8 90510-1991
Steel
FT14-14 HC, 1" NPT PN25 120 110 80 160 220 6.8 90510-1992
FT14 FT14-4.5, G11/2" PN16 270 130 108 200 270 17.5 6-31801 5045 3
Connection: BSP or NPT
threaded FT14-4.5, G2" PN16 300 138 125 200 288 22.0 6-31801 5045 4
Body outside surface: Painted
black FT14-10, DN40 G11/2" PN16 270 130 108 200 270 17.5 6-31801 5046 3
Material body: SG or Cast Iron
Material inserts: Stainless FT14-10, DN50 G2" PN16 300 138 125 200 288 22.0 6-31801 5046 4
Steel
FT14-4.5, 1 1/2" NPT PN16 270 130 108 200 270 17.6 90510-1984
FT14-10, 1 1/2" NPT PN16 270 130 108 200 270 17.6 90510-1985
FT14-14, 1 1/2" NPT PN16 270 130 108 200 270 17.6 90510-1986
FT14-4.5, 2" NPT PN16 300 138 125 200 288 22.0 90510-1987
FT14-10, 2" NPT PN16 300 138 125 200 288 22.0 90510-1988
Integration components
FT14-14, 2" NPT PN16 300 138 125 200 288 22.0 90510-1989
362 2008/11
5. Integration components
Other Components / Non sanitary
DN15 and DN20 FT47-4.5TV, DN15, PN40 150 80 80 215 120 10.8 6-31801 2772 1
Connection: Flanges EN 1092
Body outside surface: Painted FT47-4.5TV, DN20, PN40 150 80 80 225 120 10.8 6-31801 2772 2
black
Material: Body = SG Iron, FT47-10TV, DN15, PN40 150 80 80 215 120 10.8 6-31801 2773 1
Inserts = Stainless Steel
FT47-10TV, DN20, PN40 150 80 80 225 120 10.8 6-31801 2773 2
DN25, DN40 and DN50 FT47-4.5TV, DN25, PN40 160 115 85 276 170 15.0 6-31801 2772 3
Connection: Flanges EN 1092
Body outside surface: Painted FT47-4.5TV, DN40, PN40 230 130 115 326 200 33.0 6-31801 2772 4
black
Material body: SG Iron FT47-4.5TV, DN50, PN40 230 141 123 332 200 43.0 6-31801 2772 5
Material inserts: Stainless
Steel FT47-10TV, DN25, PN40 160 115 85 276 170 15.0 6-31801 2773 3
FT47-10TV, DN40, PN40 230 130 115 326 200 33.0 6-31801 2773 4
FT47-10TV, DN50, PN40 230 141 123 332 200 43.0 6-31801 2773 5
Integration components
Description Denomination A B C E Kg Part No.
2008/11 363
5. Integration components
Other Components / Non sanitary
MST21 MST21 -1/2" BSP E-fill PN25 61.0 45 0.48 6-31801 9655 1
Connection: BSP threaded
Material: Stainless steel MST21 -1/2" BSP G-fill PN25 61.0 45 0.48 6-31801 9809 1
364 2008/11
5. Integration components
Other Components / Non sanitary
Integration components
TD42 Thermodynamic Steam Trap
2008/11 365
5. Integration components
Other Components / Non sanitary
APT10 APT10-4.5 BSP 3/4" PN10 187 23 223 277 171 14 90503-7744
Connection inlet/outlet: 3/4"
Connection motive/exhaust: 1/2"
Material body: SG Iron, GGG 40.3
Material inserts: Stainless steel
366 2008/11
5. Integration components
Other Components / Non sanitary
5.4.2.3 Strainers
Fig 12
Fig 12 SG 1 1/4" PN25 GGG-40 155 103 140 60 26.0 2.15 6-31801 5609 4
Fig 12 SG 1 1/2" PN25 GGG-40 190 115 153 65 41.0 3.30 6-31801 5609 5
Fig 12 SG 2" PN25 GGG-40 230 140 177 76 68.0 5.10 6-31801 5609 6
Fig 34
Fig 34 Fig 34, 1"ANSI 150, 1/32" perf. 154 95 150 13.0 3.8 90510-3505
Connection: ANSI 150 flanges
Material body: Carbon steel Fig 34, 1 1/2"ANSI 150, 1/32" perf. 200 146 260 29.0 9.0 90510-3506
Material strainer screen: 316L
(Picture shows DN15 to DN25) Fig 34, 2"ANSI 150, 1/32" perf. 230 180 320 46.0 10.5 90510-3507
Fig 34, 2 1/2"ANSI 150, 1/32" perf. 290 200 325 72.0 17.5 90510-3508
Fig 34, 3"ANSI 150, 1/32" perf. 310 205 330 103.0 24.0 90510-3509
Fig 34, 4"ANSI 150, 1/8" perf. 351 255 405 155.0 30.0 90510-3510
Fig 34, 6"ANSI 150, 1/8" perf. 473 345 560 340.0 68.0 90510-3511
Integration components
Fig 37
Fig 37 Fig 37 SG DN20 PN40 GGG-40 150 80 130 8.0 2.8 90503-8975
Connection: Flanges
Material body: SG Iron Fig 37 SG DN25 PN40 GGG-40 160 95 150 13.0 3.5 6-31801 5044 1
Material strainer screen: 316L
(Picture shows DN20 to DN50) Fig 37 SG DN32 PN40 GGG-40 180 135 225 22.0 6.2 6-31801 5044 2
Fig 37 SG DN40 PN40 GGG-40 200 145 240 29.0 7.4 6-31801 5044 3
Fig 37 SG DN50 PN40 GGG-40 230 175 300 46.0 11.2 6-31801 5044 4
Fig 37 SG DN65 PN40 GGG-40 290 200 335 72.0 20.0 6-31801 5044 5
Fig 37 SG DN80 PN40 GGG-40 310 210 340 103.0 24.0 6-31801 5044 6
Fig 37 SG DN100 PN40 GGG-40 350 255 415 155.0 36.0 6-31801 5044 7
2008/11 367
5. Integration components
Other Components / Non sanitary
Vacuum breakers
368 2008/11
5. Integration components
Pneumatic Components / Valves
5.5.1 Valves
SY3000
Application
Valve terminals are used in cabinets for activating process valves, cylinders and other pneumatic devices.
Features
Base plate and fittings included.
Communication by 25 pin D-sub, Profibus or DeviceNet.
Valve terminals
Integration components
Valve terminal accessories
2008/11 369
5. Integration components
Pneumatic Components / Air treatment/
Application
For regulating and filtration of in-coming air to modules and systems
Features
- Manual on/off valve, lockable
- Filter regulator 5 µm
- Pressure gauge
- Pressure switch pre-set to 4.5 bar, 5 m cable
- 1550 liter/min
- 1.5-10 bar
- ISO 228/1 G3/8 inlet
- Female 10 mm push-in fitting outlet
Option
- With softstart
Integration components
370 2008/11
5. Integration components
Pneumatic Components / Air treatment/
FRL
FRL w softstart G3/8 1.5-10bar 5um+switch 4.5bar+softst. 212 284 151 90511-1073
Accessories
Integration components
2008/11 371
5. Integration components
Pneumatic Components / Air treatment/
Application
I/P transducers are used to maintain a certain pressure constant at a given current input. They can be used with
various equipment were a regulated pressure are needed, e.g. CPM valves.
Features
-Input signal: 4-20 mA
-Out-put: 0-0.9 MPa
I/P
372 2008/11
5. Integration components
Pneumatic Components / Fittings and hoses
Application
Air hoses for processing solutions. The PA hose is most common in dairy industri but PVDF hose is more resistant
against chloride. PE hoses have better flexibility.
Recommendation
- PA, general usage
- PVDF, general usage, especially in CIP areas
- PE, inside cabinets only
Air hoses
Integration components
PE LDPE natural Ø6/4 6-1995 101 047
Polyethylene hose type LDPE,
(Low Density Polyethylene) LDPE natural Ø10/8 6-1995 101 049
Colour: Natural
Working temperature -10ºC to
+50ºC
2008/11 373
5. Integration components
Pneumatic Components / Fittings and
5.5.3.2 Fittings
Push-in connectors
Application
Vacuum and compressed air
Features
Material body: Nickel plated brass
Material gripper spring: Stainless steel (R31 and R32 = brass)
Material release ring: Technopolymer
Material gasket: NBR
Temperature range: -20ºC to +80ºC
Pressure range: -0.99 bar to 16 bar
Integration components
374 2008/11
5. Integration components
Pneumatic Components / Fittings and hoses
Push-in connectors
Integration components
R5 T-connector T Push-in 6mm RL5 6 - 18.3 36.6 - 6-31801 5158 2
2008/11 375
5. Integration components
Pneumatic Components / Fittings and
R18 Straight adapter long extG1/8"-6mm, male long R18 6 1/8 43.4 - - 6-31801 5158 5
Parallell external thread
R8 Straight reducer Push-in female 6mm-male 10mm RL8 10 - 32.9 - 6 6-31801 5161 3
Integration components
376 2008/11
5. Integration components
Pneumatic Components / Fittings and hoses
RL10 Bulkhead connector Push-in bulkhead 6mm-6mm M13x1 RL10 6 M13x1 31.2 - 6 90510-0915
R31 L-connector rotating L Push-in rotate extG1/8"-6mm RL31 6 1/8 20.9 19.1 - 90503-0903
Parallell external thread
L Push-in rotate extG1/4"-6mm RL31 6 1/4 20.9 21.1 - 90510-8972
R32 T-connector rotating T Push-in rotate extG1/8"-6mm RL32 6 1/8 41.8 19.1 - 90510-8977
Parallell external thread
T Push-in rotate extG1/4"-6mm RL32 6 1/4 41.8 21.1 - 90510-8978
Integration components
2008/11 377
5. Integration components
Tanks and heat exchangers / Fittings and
Balances Tanks
Tanks for regulating and equalising flow
AISI 316L stainless steel as standard
standard sizes: 100, 350 and 500 litres
Integration components
378 2008/11
5. Integration components
Tanks and heat exchangers / Balance tanks
Application
Regulation and equalisation of flow.
Features
Versions of the balance tank equipped with a special CIP cover can be connected by means of a CIP pipe to a CIP
nozzle on top of the cover. The valve of the tank is thus regularly cleaned by the CIP flow through the tank.
Some versions of the tank have a spillway to direct any overflow of liquid that may occur. These versions are not
available with CIP cover.
Equiped with mechanical level control but can also be delivered with connections for level indication instruments.
Integration components
2008/11 379
5. Integration components
Tanks and heat exchangers / Balance tanks
BTD-100
BTD-100 w Spillway BTD-100 AISI316 sp.-w low legs no cover 400 1000 660 600 6-31542 0569 1
Max inlet pressure: 5 bar
Capacity: 0-8 m3/h BTD-100 AISI316 sp.-w low legs cover 400 1000 660 600 6-31542 0569 2
Connection in: 51 mm
Connection out: 63.5 mm BTD-100 AISI316 sp.-w high legs no cover 400 1100 660 600 6-31542 0569 3
Connection return: 51 mm
With mechanical level control BTD-100 AISI316 sp.-w high legs cover 400 1100 660 600 6-31542 0569 4
BTD-100 without Spillway BTD-100 AISI316 low legs no cover 400 1000 365 600 6-31542 0570 1
Max inlet pressure: 5 bar
Capacity: 0-8 m3/h BTD-100 AISI316 low legs cover 400 1000 365 600 6-31542 0570 2
Connection in: 51 mm
Connection out: 63.5 mm BTD-100 AISI316 low legs CIP cover 400 1000 365 600 6-31542 0570 3
Connection return: 51 mm
With mechanical level control BTD-100 AISI316 high legs no cover 400 1100 365 600 6-31542 0570 4
BTD-100 AISI316 high legs cover 400 1100 365 600 6-31542 0570 5
BTD-100 AISI316 high legs CIP cover 400 1100 365 600 6-31542 0570 6
Integration components
380 2008/11
5. Integration components
Tanks and heat exchangers / Balance tanks
BTD-350
BTD-350 w Spillway BTD-350 AISI316 sp.-w low legs no cover 800 1100 6-31542 0572 1
Max inlet pressure: 5 bar
Capacity: 5-35 m3/h BTD-350 AISI316 sp.-w low legs cover 800 1100 6-31542 0572 2
Connection in: 63.5 mm
Connection out: 76 mm BTD-350 AISI316 sp.-w low legs CIP cover 800 1100 6-31542 0572 3
Connection return: 76 mm
With mechanical level control BTD-350 AISI316 sp.-w high legs no cover 800 1200 6-31542 0572 4
BTD-350 AISI316 sp.-w high legs cover 800 1200 6-31542 0572 5
BTD-350 AISI316 sp-w high legs CIP cover 800 1200 6-31542 0572 6
BTD-350 BTD-350 AISI316 low legs no cover 800 1100 6-31542 0573 1
Max inlet pressure: 5 bar
Capacity: 5-35 m3/h BTD-350 AISI316 low legs cover 800 1100 6-31542 0573 2
Connection in: 63.5 mm
Connection out: 76 mm BTD-350 AISI316 low legs CIP cover 800 1100 6-31542 0573 3
Connection return: 76 mm
With mechanical level control BTD-350 AISI316 high legs no cover 800 1200 6-31542 0573 4
BTD-350 AISI316 high legs CIP cover 800 1200 6-31542 0573 6
BTD-500
Integration components
Connection return: 76 mm
With mechanical level control
Contact your local TP
representative to get more
information about this type.
2008/11 381
5. Integration components
Tanks and heat exchangers / Brazed plate
Application
Brazed plate heat exchangers, (BHE), is used for heating of water with steam.
Design
The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel
plates are corrugated to improve heat transfer efficiency and to make them rigid.
The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are
also brazed to withstand the pressure of the media handled.
Features
-Material plates and connections: AISI 316
-Brazing material: Copper
-Min working temp: -160ºC
-Max working temp: 175ºC
-Max working pressure: 25-32 bar
-Max flowrate at 5 m/s: CB14=3.6 m3/h, CB76=39 m3/h
Benefits
High heat efficiency makes it extremely compact and easy to install where space is limited.
The unit has no gaskets and is therefore suitable in applications where temperature and/or pressure is high.
Options
A wider range of plate heat exchangers and accessories are available, please contact your Tetra Pak representative
for sizing and selection.
Integration components
382 2008/11
5. Integration components
Tanks and heat exchangers / Brazed plate heat
BHE
CB76 CB76-20H B23 B23 G2"B 519 92 63 191 618 6-32361 7020 1
S1-S4 = G2"B
CB76-30H B23 B23 G2"B 519 92 92 191 618 6-32361 7030 1
CB76-40H B23 B23 G2"B 519 92 120 191 618 6-32361 7040 1
CB76-50H B23 B23 G2"B 519 92 149 191 618 6-32361 7050 1
CB76-60H B23 B23 G2"B 519 92 177 191 618 6-32361 7060 1
CB76-40L B23 B23 G2"B 519 92 123 191 618 6-32361 7240 1
Integration components
2008/11 383
5. Integration components
Tanks and heat exchangers / Brazed plate
Integration components
384 2008/11
Select the right
components
Valves
6. Automation and electrical
components
6.1 Cables .................................................................386
6.1.1 Cables for sensors .............................................. 386
6.2 Communication ...................................................387
Pumps
6.2.1 Equipment .......................................................... 387
6.2.2 Accessories ......................................................... 389
6.2.3 Cables ................................................................. 392
6.3 Instruments .........................................................394
6.3.1 Indicators / Meters ............................................. 395
6.3.2 Recorders ............................................................ 396
Measuring instruments
6.3.3 Accessories ......................................................... 399
6.3.4 Controllers .......................................................... 400
6.4 Motor drive systems ...........................................402
6.4.1 Frequency converters ........................................ 403
6.4.2 Frequency converters, Accessories .................. 413
6.5 Operator panels ..................................................414
6.5.1 PC based operator panels ................................. 415
Integration components
6.5.2 Graphical operator panels ................................. 416
6.5.3 Accessories ......................................................... 417
6.1 Cables
Application
Sensor cables are used to connect process devices with M12-connectors. The demands on sensor cables in process
lines are very high, which means that high quality cables should always be used.
Sensor cables
386 2008/11
6. Automation and electrical
components
Communication / Equipment
6.2 Communication
6.2.1 Equipment
Communication equipment
Application
Communication equipment are used in control systems to connect, bridge or extend Ethernet and fieldbus
networks.
Benefits
• Industrial design and highest reliability
• Tested and verified communication equipment
2008/11 387
6. Automation and electrical components
Communication / Equipment
Unmanaged switches
Managed switch
Modems
Fieldbus equipment
388 2008/11
6. Automation and electrical
components
Communication / Accessories
6.2.2 Accessories
Communication accessories
Application
Communication accessories for Ethernet and fieldbus networks.
Benefits
• Industrial design and highest reliability
2008/11 389
6. Automation and electrical components
Communication / Accessories
Connectors
Patch panel
Patch code
GSM accessories
390 2008/11
6. Automation and electrical
components
Communication / Accessories
SMCS accessories
2008/11 391
6. Automation and electrical components
Communication / Cables
6.2.3 Cables
Communication cables
Application
Communication cables are used for connecting Ethernet and fieldbus networks.
Benefits
• Industrial design and highest reliability
• Tested and verified communication cables and connectors
Automation and electrical
components
392 2008/11
6. Automation and electrical
components
Communication / Cables
Programming cables
components
2008/11 393
6. Automation and electrical components
Instruments / Cables
6.3 Instruments
394 2008/11
6. Automation and electrical
components
Instruments / Indicators / Meters
Indicators
Application
Indicators are used to display actual process data.
Benefits
• Hygienic design in protection class IP65/NEMA 3
• High visibility LED display
• Universal process input with transmitter power supply
Indicators
Commander C150 C150 6-digits single loop 24 V DC 48 96 91.6 44.6 119 90503-5573
Universal indicator
2008/11 395
6. Automation and electrical components
Instruments / Recorders
6.3.2 Recorders
Recorders
Application
Recorders are used to record process data and are available in various versions:
- Circular chart recorders
- Strip chart recorders
- Graphic recorders (paperless) storing data on memory boards
Benefits
• Hygienic design in protection class IP66/NEMA 4X
• Universal process inputs
• FDA-approved versions are available
Automation and electrical
components
396 2008/11
6. Automation and electrical
components
Instruments / Recorders
Chart recorders
Type C1900 C1900 1-pen, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 1
Circular chart recorder
C1900 1-pen+EVP, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 2
C1900 2-pen, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 3
C1900 2-pen+EVP, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 4
C1900 3-pen, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 5
C1900 3-pen+EVP, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 6
C1900 4-pen, 115/230VAC 382 386.8 320.8 320.8 101.1 6-31801 9704 7
Type C1900 C1900 2-pen, 2 controllers 115/230VAC 382 386.8 320.8 320.8 101.1 90503-2902
Circular chart recorder with
controllers
Type C1900 C1900 2-pens+EVP, FDA module, 115/230VAC 382 386.8 320.8 320.8 101.1 6-990407 40
Circular chart recorder with
FDA-module
Commander SR100 SR103A 3-pen, strip chart, 24 V DC 144 144 138 138 230 90503-5553
Multipoint strip chart recorder
for panel mount SR106A 6-pen, strip chart, 24 V DC 144 144 138 138 230 90503-5554
2008/11 397
6. Automation and electrical components
Instruments / Recorders
Graphic recorders
ScreenMaster SM1000 SM1000 6-channel Colour screen 24 V DC 144 138 195 90503-5563
FDA-approved recorder for
panel mount, CF-memory
data storage
Type SM2000 SM2000 12-channel Colour screen 24 V DC 144 138 195 90503-7020
FDA-approved recorder for
panel mount, touch screen, SM2000 6-channel Colour screen 85-265VAC 144 138 195 90503-3548
CF-memory data storage
Automation and electrical
components
398 2008/11
6. Automation and electrical
components
Instruments / Accessories
6.3.3 Accessories
Accessories
Application
The range includes acessories for recorders.
Recorder accessories
2008/11 399
6. Automation and electrical components
Instruments / Controllers
6.3.4 Controllers
Controllers
Application
Controllers are used to regulate process parameters and are available in two versions:
- Advanced controllers
- Controllers
Benefits
• Advanced controllers are in protection class IP66/NEMA 4X
• High-visability LED-displays
• Universal process inputs
Automation and electrical
components
400 2008/11
6. Automation and electrical
components
Instruments / Controllers
Advanced controllers
Controllers
Commander C50 C50 single loop contr. 24V DC analog out 48 48 44.6 44.6 110 90503-7084
Compact single-loop
controller for panel mount C50 single loop contr. 24V DC dig. out 48 48 44.6 44.6 110 90503-7085
2008/11 401
6. Automation and electrical components
Motor drive systems / Controllers
402 2008/11
6. Automation and electrical
components
Motor drive systems / Frequency converters
Frequency converters
Application
Frequency converters are used to control the motor speed of pumps, homogenisers or separators.
When selecting frequency converters, proceed as follows:
1. Choose protection class: IP20/21 (cabinet mounting) or IP66 (for field mounting).
2. Choose frequency converter type: FC 301 or FC 302 (for advanced tasks, safe stop or long cables).
3. Choose mains voltage: 3x200-240 V, 3x380-480/500 V or 3x525-60 V.
4. Choose type of filter: class A2 (no RFI-filter) or A1/B (fulfills EMC demands and Corporate standard).
5. Choose add-ons: LCP (operator panel), fieldbus version, brake.
6. Select the frequency converter with correct power rating for the motor.
Benefits
• FC 300 frequency converters are compact and available in IP20/IP21 (Nema 1) or IP66 (Nema 4x).
• FC 300 frequency converters are available without fieldbus, or with Profibus-DP or DeviceNet.
• FC 300 frequency converters are backwards compatible with the old VLT-drives.
• FC 300 frequency converters can be configured with the MCT 10 set-up software.
• FC 302 frequency converters have safe stop as a standard.
2008/11 403
6. Automation and electrical components
Motor drive systems / Frequency converters
Class A2 filter FC 301 PK75 IP20 1.0 HP (0.75 kW) 268 90 205 A2 90503-5356
with LCP graphical display
FC 301 P1K1 IP20 1.5 HP (1.1 kW) 268 90 205 A2 90503-5357
FC 301 P4K0 IP20 5.0 HP (3.7 kW) 268 130 205 A3 90503-5361
FC 301 P5K5 IP20 7.5 HP (5.5 kW) 480 242 260 B1 90503-5362
FC 301 P11K0 IP20 15/20 HP (11/15 kW) 650 242 260 B2 90503-5364
FC 301 P15K0 IP20 20/25 HP (15/18.5 kW) 680 308 310 C1 90503-5365
FC 301 P18K5 IP20 25/30 HP (18.5/22 kW) 680 308 310 C1 90503-5366
FC 301 P22K0 IP20 30/40 HP (22/30 kW) 680 308 310 C1 90503-5367
FC 301 P30K0 IP20 40/50 HP (30/37 kW) 770 370 335 C2 90503-5368
FC 301 P37K0 IP20 50/60 HP (37/45 kW) 770 370 335 C2 90503-5369
Class A2-filter FC 301 PK75 NEMA1 1.0 HP (0.75 kW) 268 90 205 A2 90503-9337
with LCP graphical display and
DeviceNet FC 301 P1K1 NEMA1 1.5 HP (1.1 kW) 268 90 205 A2 90503-9338
FC 301 P3K7 NEMA1 5.0 HP (3.7 kW) 268 130 205 A3 90503-9342
FC 301 P5K5 NEMA1 7.5 HP (5.5 kW) 480 242 260 B1 90503-9343
FC 301 P11K0 NEMA1 15/20 HP (11/15 kW) 650 242 260 B2 90503-9345
FC 301 P15K0 NEMA1 20/25 HP (15/18.5 kW) 680 308 310 C1 90503-9346
FC 301 P18K5 NEMA1 25/30 HP (18.5/22 kW) 680 308 310 C1 90503-9347
Automation and electrical
FC 301 P22K0 NEMA1 30/40 HP (22/30 kW) 680 308 310 C1 90503-9348
FC 301 P30K0 NEMA1 40/50 HP (30/37 kW) 770 370 335 C2 90503-9349
components
FC 301 P37K0 NEMA1 50/60 HP (37/45 kW) 770 370 335 C2 90503-9350
404 2008/11
6. Automation and electrical
components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 301 PK75 IP20 0.75 kW EMC 268 90 205 A2 90503-5371
no display
FC 301 P1K1 IP20 1.1 kW EMC 268 90 205 A2 90503-5372
EMC-filter class A1/B FC 301 PK55 IP20 0.55 kW EMC 268 90 205 A2 90503-5379
with LCP graphical display
FC 301 PK75 IP20 0.75 kW EMC 268 90 205 A2 90503-5380
2008/11 405
6. Automation and electrical components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 301 PK75 IP20 0.75 kW EMC 268 90 205 A2 90503-5398
with LCP graphical display and
Profibus-DP FC 301 P1K1 IP20 1.1 kW EMC 268 90 205 A2 90503-5399
EMC-filter class A1/B FC 301 PK75 IP20 0.75 kW EMC 268 90 205 A2 90503-5414
with LCP graphical display and
DeviceNet FC 301 P1K1 IP20 1.1 kW EMC 268 90 205 A2 90503-5415
406 2008/11
6. Automation and electrical
components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 301 PK75 NEMA 4X 0.75 kW 420 242 195 A5 90510-4854
with LCP graphical display
FC 301 P1K1 NEMA 4X 1.1 kW 420 242 195 A5 90510-4855
EMC-filter class A1/B FC 301 PK75 NEMA 4X 0.75 kW 420 242 195 A5 90510-4872
with LCP graphical display and
Profibus-DP FC 301 P1K1 NEMA 4X 1.1 kW 420 242 195 A5 90510-4873
2008/11 407
6. Automation and electrical components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 301 PK75 NEMA 4X 0.75 kW 420 242 195 A5 90510-4890
with LCP graphical display and
DeviceNet FC 301 P1K1 NEMA 4X 1.1 kW 420 242 195 A5 90510-4891
408 2008/11
6. Automation and electrical
components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 302 PK75 IP20 0.75 kW EMC 268 90 205 A2 90503-5499
with LCP graphical display
FC 302 P1K1 IP20 1.1 kW EMC 268 90 205 A2 90503-5500
2008/11 409
6. Automation and electrical components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 302 PK75 IP20 0.75 kW EMC 268 90 205 A2 90503-5523
with LCP graphical display and
Profibus-DP FC 302 P1K1 IP20 1.1 kW EMC 268 90 205 A2 90503-5524
410 2008/11
6. Automation and electrical
components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 302 PK75 NEMA 4X/IP66 0.75 kW 420 242 195 A5 90510-7970
with LCP graphical display
FC 302 P1K1 NEMA 4X/IP66 1.1 kW 420 242 195 A5 90510-7971
2008/11 411
6. Automation and electrical components
Motor drive systems / Frequency converters
EMC-filter class A1/B FC 302 PK75 NEMA 4X/IP66 0.75 kW 420 242 195 A5 90510-7987
with LCP graphical display and
DeviceNet FC 302 P1K1 NEMA 4X/IP66 1.1 kW 420 242 195 A5 90510-7988
412 2008/11
6. Automation and electrical
components
Motor drive systems / Frequency converters, Accessories
Accessories
Application
Normally, frequency converters already include necessary accessories when ordered.
However, accessories can be added to frequency converters at a later state to increase
the functionality of the frequency converter or they can be purchased as spare parts.
Benefits
• Fieldbus boards enable communication with Profibus-DP or DeviceNet
• External power supply maintains power to the control section of a frequency converter
• Graphical operator panels are used to parametrise and inspect a frequency converter
FC 300 options
Cover plates for IP21 drives MCF 101, IP21 for size A2 90503-5545
2008/11 413
6. Automation and electrical components
Operator panels / Frequency converters, Accessories
414 2008/11
6. Automation and electrical
components
Operator panels / PC based operator panels
Application
PC-based operator panels are used as HMI in procesing plants and lines.
The operator equipment is split in two units, which are connected with the SDL cable.
• Operator screen 5AP920.
Touch TFT-screen, 15 inch, with resolution 1024x768 pixels.
Design in IP65 with Tetra Pak look and logo.
• Industrial PC APC620.
Compact Flash memory elimates the need of harddisk.
• Cable SDL, 1,8 m (see Accessories).
Allows separate mounting of screen and Industrial PC.
Benefits
• A common Tetra Pak look with Tetra Pak logo
• Front design in IP65
• Design without any fans or harddisks gives very high reliability
• Can be used with InTouch, RSView, WinCC, etc.
Industrial PC
Automation and electrical
Industrial pC
2008/11 415
6. Automation and electrical components
Operator panels / Graphical operator panels
Application
Graphical operator panels are used as HMI for process modules and are available in various sizes:
- 6 inch touch TFT-screen for smaller applications
- 10 inch touch TFT-screen
- 12 inch touch TFT-screen
- 15 inch touch TFT-screen when more information is needed
All operator panels are supplied with Tetra Pak look and logo.
Benefits
• A common Tetra Pak look with Tetra Pak logo
• Hygienic front design in IP66
• Windows CE operating system
416 2008/11
6. Automation and electrical
components
Operator panels / Accessories
6.5.3 Accessories
2008/11 417
Plant components catalogue
Plant components
catalogue
© 2008 Tetra Pak Processing Components AB, Lund, Sweden, TPPS10433 en, 2008-12.
www.tetrapak.com