Professional Documents
Culture Documents
User Manual: 一、 Device layout
User Manual: 一、 Device layout
MANUAL
Please read this manual before use and refer to the following steps to set up.
If you have any questions, please contact after-sales support.
一、Device layout
二、Operation introduction
light up.
• Turn off : At the power-on state, long press ON/OFF button for 3
seconds, both lights light off, and the camera will restart
(about 60 seconds).
• Charging : Connect the charging cable and display the red light;
Note 1: Please charge if you use it for the first time. It takes 3-4 hours to
fully charge.
3、APP download
page(figure 2).
Step 2: Select the download page according to the system of the mobile
phone.
• Method 2: For Android phones, download and install the APP software
四、Point-to-point mode
Step 1: On your phone’s WiFi page, please find the camera's WiFi signal
name(this is the machine UID number on the back of the camera), and
connect it.
Step 2: Open the APP (HDMiniCam) and add new online camera.
Step 3: Back to online camera home page , and you can watch videos.
Note 1: Please change your default device access password for security.
The original password (8888) does not need to be modified and you only
need to enter a new password.
Note 2: The effective range of this WiFi signal is within 10 meters.If the
phone is outside this range, it will automatically disconnect.If you want
to reuse it, please reconnect the camera signal.
五、Remote connection mode
Step 1: On the APP's(HDMiniCam) online camera home page, please
Step 2: Click the “Advance Config”, and then click the “WiFi config”.
Step 3: Select the WiFi signal that you want to access, and input your
password.
Step 4: Click the “OK” button, and then it’s done. You can see the
Note 1: After you are done, you need to wait for the camera to
restart(about 60s).The camera status will change from offline to online,
and you can access it remotely.
Note 2: Only supports 2.4GHZ WiFi, does not support 5GHZ WiFi.
Setting ---> Advance config ---> Alarm Config ---> Change motion
Note 2: When the activity detection prompt is enabled, the camera will
not give out alarm sound. This is the prompt information pushed by
mobile phone APP.
九、Specifications
十、FAQ
1. Use occasion:
Please abide by national relevant laws and regulations strictly.
Don’t use the product for any illegal purpose. Otherwise, the
consequence will be borne by the users.
2. About battery:
If it is not in use for a long time, please charge fully before use and
charge it once every three months at least to ensure charging activities
of the lithium battery.
3. Work temperature:
From -10℃ to 60℃
4. Work humidity:
20% - 80% RH. Don't place the product at dump work environment
as the product does not have waterproof function.
5. Photographing luminance:
Please use it at an environment with sufficient light. Don’t face the
camera towards extremely strong light to avoid damage to optical
elements.
6. Cleaning requirements:
Don’t use the product at a place with large dust concentration to
avoid that the lens and other components are polluted with dust so as to
affect the photographing effect.
7. Other matters:
The product belongs to precise electronic products. Don’t make it
suffer from violent impact and vibration. Don’t use it under strong
magnetic field and electric field.
8. Supplementary description:
Please make operation after reading the user manual completely to
avoid misguiding. Please contact with the distributor for matters that are
not mentioned.