Professional Documents
Culture Documents
Coating Systems SP-1246 V.4 Protected
Coating Systems SP-1246 V.4 Protected
Coating Systems SP-1246 V.4 Protected
system 1:
primer:Hempadur Primer 15300 (Min DFT 50 microns)
Intermediate coat: Hempadur Hi-build 45200 (Min DFT 100 microns)
Top coat: Hempathane Topcoat 55210 (Min DFT 50 microns)
system 2:
First coat: Hampadur Mastic 45880/1 (Min DFT 150 Microns)
System 1:
primer: Penguard Primer (Min DFT 50 microns)
Intermediate coat: Penguard HB (Min DFT100microns)
Top coat: Durathane (Min DFT 50 microns)
System 2:
Primer:Penguard express (Red) (Min DFT 75 micron)
Intermediate coat: Penguard express (Grey) (Min DFT 75 micron)
Top Coat: Hard top XP (Min DFT50 micron)
system 3:
system 1:
primer: Sigmacap primer EP 7680 (Min DFT 50 microns)
Intermediate coat: Sigmacap Coating EP 7682 (Min DFT 100 microns)
Top Coat: Sigmacap finish PU 7690 (Min DFT 50 microns)
system 2:
First coat: Sigmacover 410Y - 150 microns DFT
system 1:
primer: Carboguard 893 (Min DFT 50 microns)
Intermediate coat: Carboguard 190HB (Min DFT 100 microns)
Top Coat: Carbothane 134(Min DFT 50 microns)
system 2:
First coat: Carboguard 890 (min 125 DFT)
Top Coat: Carbothane 134HP (min 75 DFT)
primer: Siprime 215 (Min DFT 50 microns )
Intermediate coat: Sipoxy Sheld 240 (Min DFT 100 Microns)
Top Coat: Sipthane 360 (Min DFT 50 Microne)
system 1:
- primer: Epilux 78 (Min DFT 50 Microns)
- Intermediate coat: Epilux 218 Hb (Min DFT 100 Microns)
- Top Coat: Luxethane 5000 (Min DFT 50 Microns)
system 2:
- First coat: Epimastic 7200 (Min DFT 150 micron)
- Top Coat: Luxethane 5000 (Min DFT 50 Microns)
system 1:
- Primer: Intergard 251 (Min DFT 50 Microns)
- Intermediate coat: Intergard 475 HS(Min DFT 100 Microns)
- Top Coat: Interthane 990SG (Min DFT 50 Microns)
System 2:
- First coat: Interseal 1052 (150 microns DFT)
- Top coat: Interthane 990SG (50 microns DFT)
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Chetan Kosambia
NO
[Chetan.k@sigmapaints.com]
Thomas Pinto
NO
[TPinto@stoncor-me.com]
NO
Anand Xavier
NO
[anand.xavier@asianpaints.com]
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
1. Barrier; 60 micron.
2. Jotacote univ.; 160 micron
3. Hardtop XP; 60 micron
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Chetan Kosambia
NO
[Chetan.k@sigmapaints.com]
Thomas Pinto
NO
[TPinto@stoncor-me.com]
Anand Xavier
NO
[anand.xavier@asianpaints.com]
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
system 1:
- primer: Hempel Gavosil 15700 Min DFT 75 microns
- Intermediate coat: Hempel Silicone Aluminium 56914 Min DFT 25
microns
- Top Coat: Hempel Silicone Aluminium 56914 Min DFT 25 microns
system 2:
2 layers of Hempadur 85671
Each layer 100 micron, TDFT 200 microns
system 1:
- first coat: Epoxy HR (DFT100 micron)
- Top coat: Epoxy HR (DFT 100 micron)
system 2:
- primer: Resist 86 AV Min DFT 75 microns
- Intermediate coat: Solvalitt Aluminium Min DFT 20 microns
Top coat : Solvalitt Aluminium Min DFT 20 microns
system 3:
system 2:
- primer: Sigma Zinc 158 Min DFT 75 microns
- Intermediate coat: Sigma therm 540 Min DFT 25 microns
- Top Coat: Sigma therm 540 Min DFT 25 microns
system 1:
- first coat: Interbond 2340UPC (min DFT 100 micron)
- Top coat: Interbond 2340UPC (min DFT 100 micron)
system 2:
- primer: Interzinc 22 (Min DFT 50 microns)
- Intermediate coat: Intertherm 50 (Min DFT 25 microns)
- Top Coat: Intertherm 50 (Min DFT 25 microns)
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Chetan Kosambia
NO
[Chetan.k@sigmapaints.com]
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
Anand Xavier
[anand.xavier@asianpaints.com]
Product Cat Product Sub Cat Agent name Manufacturer
>200 °C to 450 °C
system 1:
- primer: Hempel Gavosil 15700 Min DFT 60 microns
- Intermediate coat: Hempel Silicone Aluminium 56914 Min DFT 25
microns
NO
- Top Coat: Hempel Silicone Aluminium 56914 Min DFT 25 microns
system 1:
- primer: Resist 86 AV Min DFT 75 microns
- Intermediate coat: Solvalitt Aluminium Min DFT 20 microns
Top coat : Solvalitt Aluminium Min DFT 20 microns NO
system 1:
- primer: Sigma Zinc 158 Min DFT 75 microns
- Intermediate coat: Sigma therm 540 Min DFT 25 microns NO
- Top Coat: Sigma therm 540 Min DFT 25 microns
system 1:
- primer: Interzinc 22 (Min DFT 50 microns)
- Intermediate coat: Intertherm 50 (Min DFT 25 microns) NO
- Top Coat: Intertherm 50 (Min DFT 25 microns)
Approved up to 400 degC
contact commants
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Product Cat Product Sub Cat Agent name Manufacturer
Unni Krishnan
[sales@gpsoman.com]
Alan D'Souza
[alan.dsouza@shawcor.com]
Ahmed Abdulrazek
<ahmed.abdulrazek@skps.com>
Product Cat Product Sub Cat Agent name Manufacturer
NO Not available
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
Anand Xavier
[anand.xavier@asianpaints.com]
Product Cat Product Sub Cat Agent name Manufacturer
system 1:
Hempadur 85531 - one coat 600 microns
system 2:
Hempadur XP 87550 (500 micron)
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Anand Xavier
NO
[anand.xavier@asianpaints.com]
Chetan Kosambia
NO
[Chetan.k@sigmapaints.com]
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
Product Cat Product Sub Cat Agent name Manufacturer
not available
Thomas Pinto
[TPinto@stoncor-me.com]
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Product Cat Product Sub Cat Agent name Manufacturer
Tanks in
water/hydrocarbon
service ≤ 60 °C
Rest of tank above
Internal coating systems for
liquid level (PCS-7A) No local Agent Carboline
carbon steels
and interior of tank roof
where PCS-7A cannot
be applied
Tanks in
water/hydrocarbon
service ≤ 60 °C
Rest of tank above
Internal coating systems for
liquid level (PCS-7A) No local Agent Berger
carbon steels
and interior of tank roof
where PCS-7A cannot
be applied
Tanks in
water/hydrocarbon
service ≤ 60 °C
Rest of tank above
Internal coating systems for
liquid level (PCS-7A) No local Agent Sigma
carbon steels
and interior of tank roof
where PCS-7A cannot
be applied
Tanks in
water/hydrocarbon
service ≤ 60 °C
Rest of tank above
Internal coating systems for
liquid level (PCS-7A) No local Agent Jotun
carbon steels
and interior of tank roof
where PCS-7A cannot
be applied
Tanks in
water/hydrocarbon
service ≤ 60 °C
Rest of tank above
Internal coating systems for
liquid level (PCS-7A) No local Agent Hempel
carbon steels
and interior of tank roof
where PCS-7A cannot
be applied
Tanks in
water/hydrocarbon
service ≤ 60 °C
Rest of tank above
Internal coating systems for
liquid level (PCS-7A) No local Agent Akzonobel
carbon steels
and interior of tank roof
where PCS-7A cannot
be applied
Comments and Quality Alerts Country of Origin
System 1:
- primer: Hempadur 85671 at min 50 microns DFT
- Hempadur 35900 at min 450 microns DFT
Thomas Pinto
NO
[TPinto@stoncor-me.com]
Anand Xavier
NO
[anand.xavier@asianpaints.com]
Chetan Kosambia
NO
[Chetan.k@sigmapaints.com]
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Internal coating systems for water/hydrocarbon
No local Agent Carboline
carbon steels service if temperature >
60°C
In conjunction with CP
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Internal coating systems for water/hydrocarbon
No local Agent Hempel
carbon steels service if temperature >
60°C
In conjunction with CP
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Internal coating systems for water/hydrocarbon
No local Agent Berger
carbon steels service if temperature >
60°C
In conjunction with CP
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Advanced OilField
Internal coating systems for water/hydrocarbon
Technology Belzona
carbon steels service if temperature >
Company LLC
60°C
In conjunction with CP
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Internal coating systems for water/hydrocarbon
No local Agent Corrocoat UK
carbon steels service if temperature >
60°C
In conjunction with CP
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Internal coating systems for water/hydrocarbon
No local Agent International
carbon steels service if temperature >
60°C
In conjunction with CP
Vessels, Temperature
below ≤ 93 °C /
For Tanks in
Internal coating systems for water/hydrocarbon
No local Agent Jotun
carbon steels service if temperature >
60°C
In conjunction with CP
Comments and Quality Alerts Country of Origin SRM
NO
Hempel’s Vinyl Ester GF 35910 (formerly 359QA) TDFT 1500 Microns
Thomas Pinto
[TPinto@stoncor-me.com]
Anand Xavier
[anand.xavier@asianpaints.com]
Yunus Maniyar
[yunus@aotcglobal.com]
Not available
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Product Cat Product Sub Cat Agent name Manufacturer
It can be applied in 2 coats each 150 microns; TDFT 300 microns (as per
latest manufacturer datasheet) and with written approval from Hempel
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Product Cat Product Sub Cat Agent name Manufacturer
Anand Xavier
NO
[anand.xavier@asianpaints.com]
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
Thomas Pinto
NO
[TPinto@stoncor-me.com]
Product Cat Product Sub Cat Agent name Manufacturer
Coating under
insulation for Carbon
Corrosion protection of under
steel and alloy steel
insulation carbon steel and No local Agent Hempel
surface in atmospheric
alloy steel surfaces
exposure
≤ 175 °C
Coating under
insulation for Carbon
Corrosion protection of under
steel and alloy steel
insulation carbon steel and No local Agent International
surface in atmospheric
alloy steel surfaces
exposure
≤ 175 °C
Coating under
insulation for Carbon
Corrosion protection of under
steel and alloy steel
insulation carbon steel and No local Agent Berger
surface in atmospheric
alloy steel surfaces
exposure
≤ 175 °C
Coating under
insulation for Carbon
Corrosion protection of under
steel and alloy steel
insulation carbon steel and No local Agent Sigma
surface in atmospheric
alloy steel surfaces
exposure
≤ 175 °C
Coating under
insulation for Carbon
Corrosion protection of under
steel and alloy steel
insulation carbon steel and No local Agent Jotun
surface in atmospheric
alloy steel surfaces
exposure
≤ 175 °C
Coating under
insulation for Carbon
Corrosion protection of under
steel and alloy steel
insulation carbon steel and No local Agent Carboline
surface in atmospheric
alloy steel surfaces
exposure
≤ 175 °C
Comments and Quality Alerts Country of Origin
system 1:
Intertherm 228HS, 100 micron DFT X 2 layrs; TDFT 200 microns
system 2:
Interbond 2340UPC, 100 micron DFT X 2 layers; TDFT 200 microns
Thermaline 450 EP; 100 micron DFT X 2 layers; TDFT 200 microns
SRM contact comments
Nair, V. (Vinod)
NO
[Vinod.Nair@akzonobel.com]
Anand Xavier
NO
[anand.xavier@asianpaints.com]
Chetan Kosambia
NO
[Chetan.k@sigmapaints.com]
Ibrahim Al Sukry
NO
ibrahim.al.sukry@jotun.com
Thomas Pinto
NO
[TPinto@stoncor-me.com]
Product Cat Product Sub Cat Agent name Manufacturer
NO
PPG HI-TEMP 1027, 100 micron DFT X 2 layers; TDFT=200 microns
NO
Interbond 1202 UPC 100 micron DFT X 2 layers; TDFT=200 micron
contact comments
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Product Cat Product Sub Cat Agent name Manufacturer
System 1:
Interbond 1202 UPC 100 micron DFT X 2 layers; TDFT=200 microns
- Air curing, Interbond 1202UP (titanium modified inorganic
copolymer)– Touch Dry, 30 minutes, Hard dry 3 hours at 25°C
NO
System2: (Heat cured: Used Only if opertaing temperature is >200°C)
Intertherm 751 CSA 100 micron DFT X 2 layers; TDFT=200 microns
-Heat curing, Intertherm 751CSA(cold spray Aluminum) – Touch Dry, 60
minutes, Hard dry 8 hours at 25°C
Mist coat as a first layer (a thin coat of Versiline CUI 56990 on TSA before
applying the full system)
NO
Versiline CUI 56990 at 150 microns X 2 layers; TDFT 300 microns
contact commants
system 1:
Intertherm 228HS, 100 micron DFT X 2
layers; TDFT 200 microns Nair, V. (Vinod)
NO
system 2: [Vinod.Nair@akzonobel.com]
Interbond 2340UPC, 100 micron DFT X 2
layers; TDFT 200 microns
system 1:
Intertherm 228HS, 100 micron DFT X 2
layers; TDFT 200 microns Nair, V. (Vinod)
NO
system 2: [Vinod.Nair@akzonobel.com]
Interbond 2340UPC, 100 micron DFT X 2
layers; TDFT 200 microns
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent Hempel
Galvanised surfaces
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent Jotun
Galvanised surfaces
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent Sigma
Galvanised surfaces
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent Berger
Galvanised surfaces
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent International
Galvanised surfaces
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent Sigma
Galvanised surfaces
Atmospheric exposure
≤ 120 C
External coating systems for un
insulated stainless steels and No local Agent Carboline
Galvanised surfaces
Comments and Quality Alerts Country of Origin SRM
System 1:
First layer: Jotacote Univ 150 microns DFT
NO
Top layer:Hardtop XP 50 microns DFT
System 2:
First layer: Penguard Universal 125 microns DFT
Top layer: Hardtrop XP 75 microns DFT
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Anand Xavier
[anand.xavier@asianpaints.com]
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Thomas Pinto
[TPinto@stoncor-me.com]
Product Cat Product Sub Cat Agent name Manufacturer
Atmospheric exposure
>120 °C to 200 °C
Atmospheric exposure
>120 °C to 200 °C
Atmospheric exposure
>120 °C to 200 °C
Atmospheric exposure
>120 °C to 200 °C
Atmospheric exposure
>120 °C to 200 °C
Atmospheric exposure
>120 °C to 200 °C
NO
Thermaline 450 EP; 100 microns X 2 layers; TDFT 200 microns
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Thomas Pinto
[TPinto@stoncor-me.com]
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Anand Xavier
[anand.xavier@asianpaints.com]
Product Cat Product Sub Cat Agent name Manufacturer
Atmospheric exposure
External coating system for un
>200 °C to 450 °C No local Agent HEMPEL
insulated stainless steels
Atmospheric exposure
External coating system for un
>200 °C to 450 °C No local Agent Jotun
insulated stainless steels
Atmospheric exposure
External coating system for un
>200 °C to 450 °C No local Agent International
insulated stainless steels
Atmospheric exposure
External coating system for un
>200 °C to 450 °C No local Agent Sigma
insulated stainless steels
Comments and Quality Alerts Country of Origin SRM
Ibrahim Al Sukry
ibrahim.al.sukry@jotun.com
Nair, V. (Vinod)
[Vinod.Nair@akzonobel.com]
Chetan Kosambia
[Chetan.k@sigmapaints.com]
Product Cat Product Sub Cat Agent name Manufacturer
TUBO-WRAP NO
contact