This document is a material safety data sheet that provides safety information for phosphorus white and phosphorus yellow. It lists the product and company identification. It describes the product as being a spontaneous combustion hazard if exposed to air, and being fatal if swallowed or inhaled. It also causes severe skin burns and eye damage. The document provides first aid measures, firefighting guidelines, handling and storage recommendations, and other safety information for the material.
This document is a material safety data sheet that provides safety information for phosphorus white and phosphorus yellow. It lists the product and company identification. It describes the product as being a spontaneous combustion hazard if exposed to air, and being fatal if swallowed or inhaled. It also causes severe skin burns and eye damage. The document provides first aid measures, firefighting guidelines, handling and storage recommendations, and other safety information for the material.
This document is a material safety data sheet that provides safety information for phosphorus white and phosphorus yellow. It lists the product and company identification. It describes the product as being a spontaneous combustion hazard if exposed to air, and being fatal if swallowed or inhaled. It also causes severe skin burns and eye damage. The document provides first aid measures, firefighting guidelines, handling and storage recommendations, and other safety information for the material.
Company Address: No. 93, Beijing East Road, Lianhe Street, Shashi District, Jingzhou, Hubei Province
Tel : -
Email: -
Identified uses: Industrial and scientific research uses.
Remark:The MSDS is prepared based on the information provided by client.
Hengwei Testing Technology(Huizhou) Co., Ltd.
HengWei Testing Technology (Huizhou)Co., Ltd.
ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891 MSDS Material Safety Data Sheets Date: Jun.29.2023 Report No.: H23062927060110 Page 1 of 6 Section 2 –Hazard identification Emergency Overview: Spontaneous combustion on exposure to air, fatal if swallowed, fatal if inhaled, causes severe skin burns and eye damage GHS Classification Self-igniting solids, category 1; Acute toxicity-oral, category 2; Acute toxicity - inhalation, category 2; Skin corrosion/irritation, Category 1A; Severe eye damage/eye irritation, category 1; Hazardous to the aquatic environment - acute hazard, category 1 GHS labeling elements, including precautionary statements Hazard type pictogram:
Signal word: Danger
Hazard statement: Spontaneous combustion on exposure to air, fatal if swallowed, fatal if inhaled, causes severe skin burns and eye damage, very toxic to aquatic organisms Precautionary statements Precautionary measures: Keep away from heat sources, sparks, open flames, and hot surfaces. Smoking is prohibited. No contact with air. Avoid contact with eyes, skin, and wash thoroughly after operation. No eating, drinking or smoking in the workplace. Avoid breathing dust and vapor. Operate only outdoors or in well ventilated areas. Wear respiratory protective equipment. Wear protective gloves, protective clothing, protective glasses and face shield. Prohibit discharge into the environment Incident response: In case of fire, use misted water to extinguish the fire. Wipe off particles from skin, immerse contact area in cold water, wrap with wet bandages. If inhaled: Move the patient to fresh air, rest, and maintain a position conducive to breathing. Skin (or hair) contact: Remove all contaminated clothing immediately. Rinse skin with water and shower. Contaminated clothing must be washed before reuse. Eye contact: Carefully flush with water for several minutes. If contact lenses are worn and can be easily removed, remove contact lenses and continue rinsing. Ingestion: Rinse mouth. Do not induce vomiting. Call a poison control center or seek medical attention immediately. Collect the spill Safe storage: Store in a well-ventilated place. Keep containers airtight. Keep under lock and key Disposal: This product and its contents, containers are disposed of according to national and local regulations Physical and chemical hazards: spontaneous combustion in contact with air Health hazards: Acute inhalation poisoning manifests as respiratory irritation, headache, dizziness, general weakness, vomiting, bradycardia, epigastric pain, jaundice, and hepatomegaly. HengWei Testing Technology (Huizhou)Co., Ltd. ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891 MSDS Material Safety Data Sheets Date: Jun.29.2023 Report No.: H23062927060110 Page 2 of 6 In severe cases, acute liver necrosis and toxic pulmonary edema appear. Oral poisoning develops oral erosion, acute gastroenteritis, and even esophageal and gastric perforation. Liver and kidney damage occurs after several days. In severe cases, liver and kidney failure occurs. This product can cause skin burns, phosphorus absorption through the burned skin causes poisoning, toxic liver disease, kidney damage, acute hemolysis, etc. in severe cases, resulting in death. Chronic poisoning neurasthenia syndrome, digestive disorders, toxic liver disease. Causes skeletal damage, especially in the mandible, with necrosis of the mandible and atrophy of the alveoli at a later stage. Environmental hazard Very toxic to aquatic organisms Section 3 – Composition/Information on Ingredients Substance/mixture Substance Chemical Name: Chemical Formula Concentration(%) CAS NO. phosphorus white; phosphorus yellow ≥99.5 12185-10-7 Section 4 –First-aid measures Inhalation : Get out of the scene quickly to fresh air. Keep airway open. If breathing is difficult, give oxygen infusion. If breathing and heartbeat stop, perform CPR immediately. seek medical attention Skin contact: Remove contaminated clothing and rinse immediately with plenty of running water. Followed by the application of 2% to 3% silver nitrate to extinguish phosphorus fire. Also use 1% copper sulfate solution to rinse. Seek medical attention. Forbid the use of oily dressings Eye contact: Immediately separate eyelids and rinse thoroughly with plenty of running water or saline for 10 to 15 min. Ingestion: Immediately drink 0.2% copper sulfate and then stimulate the pharynx with fingers to induce vomiting of gluten can be repeated several times until the vomit is free of garlic taste. After that, take 10ml of 0.2% copper sulfate solution orally every 10 minutes for 3 times. Then give 25% magnesium sulfate or sodium sulfate solution orally to induce diarrhea. Do not drink vegetable oil and milk. Seek medical attention Advice for those who protect the rescuer: use personal protective equipment as needed Special advice to doctors: treat the symptoms Section 5 - Fire Fighting Measures Extinguishing agent Extinguish with foggy water Special hazard: White phosphorus can spontaneously combust and cause combustion and explosion when in contact with air. The spontaneous combustion point in moist air is lower than that in dry air. Explosion occurs when mixed with oxidizing agents such as chlorates. Its fragments and debris on contact with dry skin will catch fire and can cause severe skin burns. Burning to generate harmful phosphorus oxide
HengWei Testing Technology (Huizhou)Co., Ltd.
ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891 MSDS Material Safety Data Sheets Date: Jun.29.2023 Report No.: H23062927060110 Page 3 of 6 Firefighting precautions and protective measures: firefighters must wear full-body acid and alkali-resistant firefighting suits, wearing air breathing apparatus to extinguish the fire. Move the container from the fire to an open area if possible. Spray water to keep the fire container cool until the end of the fire Section 6 –Accidental release measures Worker protective measures, protective equipment and emergency disposal procedures: Eliminate all ignition sources. Isolate the spill contaminated area and restrict access. Recommend emergency response personnel to wear dust masks, anti-static, anti-corrosion, anti-toxic clothing, and rubber gloves. Prohibit contact with or crossing the spill. Access to ruptured containers and spills is strictly prohibited until appropriate protective clothing is worn. Cut off the source of the spill if possible Environmental protection measures: prevent spills from entering bodies of water, sewers, basements or confined spaces The method of sheltering and removing spilled chemicals and the disposal materials used: Small spills: Cover with water, sand or soil, and keep in metal containers and in water. Large amount of spill: Construct a dike or dig a pit and cover it with moist sand and soil. Section 7 –Handling and storage Operating precautions: operate airtight and provide adequate local exhaust air. Operation is mechanized and automated as much as possible. Operators must be specially trained and strictly follow the operating procedures. It is recommended that the operator wears a self-absorbing filtering gas mask (full face mask), rubberized gas- proof clothing and rubber gloves to keep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation system and equipment. Avoid contact with oxidizers, acids and halogens. Handle lightly to prevent damage to packaging and containers. Equip with appropriate variety and quantity of fire-fighting equipment and leak emergency handling equipment. Emptying the container may leave harmful substances Storage precautions: It should be kept in water and must be submerged underwater to isolate the air. Stored in a cool, well-ventilated special storage room. The temperature of the storage room should be kept above 1℃. Keep away from fire and heat source. It should be stored separately from oxidizers, acids, halogens and edible chemicals, and should not be mixed. Use explosion-proof lighting and ventilation facilities. Prohibit the use of spark-prone machinery and tools. The storage area should be equipped with suitable materials to shelter leaks. Section 8 –Exposure controls/personal protection Occupational exposure limits: China PC-TWA:0.050.05mg/m3;PC-STEL:0.1mg/ USA (ACGIH) TLV0.1mg/m3 Biological exposure limits: No standard has been established Monitoring method: Toxic substances in air measurement method: Absorbent collection - gas chromatography method Biological monitoring test method: No standard set HengWei Testing Technology (Huizhou)Co., Ltd. ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891 MSDS Material Safety Data Sheets Date: Jun.29.2023 Report No.: H23062927060110 Page 4 of 6 Engineering control: tightly enclose and provide adequate local exhaust air. Provide safety showers and eyewash equipment Individual protective equipment: Respiratory protection: Filtered gas masks (full face masks) should be worn when exposure to toxins is possible Eye protection: Protection has been made in respiratory protection Skin and body protection: Wear insulated gas-protective clothing Hand protection: Wear rubber gloves Section 9 –Physical and chemical properties Appearance: Solid Color: Colorless to yellow Odour: Garlic odor Ignition temperature : Not available pH-value : Not available Change in condition Melting point/Freezing point : 280.5℃ Initial boiling point and boiling range : 44.1℃ Flash point : Not available Flammability (solid, gas): Not available Auto-ignition temperature: 30℃ Decomposition temperature : Not available Self-igniting : Product is not selfigniting. Explosive properties: Product does not present an explosion hazard. Explosion limits Lower: Not available Upper: Not available Oxidising properties: Not available Vapour pressure : Not available Density : 1.88 Relative density: Not available Vapour density: Not available Evaporation rate: Not available Solubility in / Miscibility with water: Insoluble in water Partition coefficient: n-octanol/water : Not available Viscosity Dynamic: Not available Kinematic : Not available
HengWei Testing Technology (Huizhou)Co., Ltd.
ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891 MSDS Material Safety Data Sheets Date: Jun.29.2023 Report No.: H23062927060110 Page 5 of 6 Section 10 –Stability and reactivity Stability: stable Hazardous reactions: contact with strong oxidizers, halogens, chlorates and other forbidden substances, there is a risk of fire and explosion Conditions to avoid contact: Air Prohibited substances: strong oxidizers, acids, halogens, sulfur, chlorates, etc. Dangerous decomposition products: meaningless Section 11 –Toxicological information Acute toxicity Oral: LD50: 3.03mg./kg (rat orally); 4.82mg/kg (mouse orally) Inhalation: no data available Dermal: no data available Skin corrosion/irritation no data available Serious eye damage/irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity no data available Reproductive toxicity no data available STOT-single exposure no data available STOT-repeated exposure no data available Aspiration hazard no data available Section 12 –Ecological information Toxicity Toxicity to fish: LC50:<0.1mg/L(96h) Toxicity to daphnia and other aquatic invertebrates: no data available Toxicity to algae: no data available Toxicity to microorganisms: no data available
HengWei Testing Technology (Huizhou)Co., Ltd.
ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891 MSDS Material Safety Data Sheets Date: Jun.29.2023 Report No.: H23062927060110 Page 6 of 6 Persistence and degradability: no data available Bioaccumulative potential: no data available Mobility in soil: no data available Section 13 –Disposal considerations Waste chemicals: Dispose of in accordance with relevant national and local regulations, or contact the factory or manufacturer to determine the disposal method. Contaminated packaging: Return container to manufacturer or dispose of in accordance with national or local regulations Disposal Notes: Please refer to relevant national and local regulations before disposal Section 14 –Transport information UN-Number ADR/RID/ADN, IMDG, IATA : 1381 (dry, or immersed in water or solution); 2447 (molten) UN proper shipping name ADR/RID/ADN, IMDG, IATA : White phosphorus (dry, or immersed in water or solution); molten white phosphorus (molten) Transport hazard class(es) ADR/RID/ADN, IMDG, IATA : 4.2,6.1 (dry, or immersed in water or solution); 4.2,6.1 (molten) Packing group ADR/RID/ADN, IMDG, IATA : I Environmental hazards Marine pollutant: Yes Section 15 –Regulatory information Regulatory information: ISO 11014-2009 Safety data sheets for chemical products - Contents and sequence of parts. Regulation (EC) No. 1272/2008 Classification, labelling and packaging of substances and mixtures. Section 16 – Other information 16.1 Release record Date of issue / Date of revision : 2023.06.29 16.2 DISCLAIMER OF LIABILITY The information in this SDS was obtained from sources which we believe are reliable.However,the information is provided without any warranty, express or implied,regarding its correctness.The conditions or methods of handling,storge,use or disposal of the product are beyond our control and may be beyondour knowledge.For this and other reason,we do not assume responsibility and expressly disclaim liability for loss,damage or expense arising out of or in any way connected with the handling,storage,use or disposal of the product.This SDS was prepared and is to be used only for this product.If the product is used as a component in another,this SDS information may not be applicable.
HengWei Testing Technology (Huizhou)Co., Ltd.
ADD:No.6, Songlin Road, Zhongkai High-tech Zone, Huizhou, Guangdong Province (Plant C) A E-mail: info@ctbv-test.com;Tel:0752-2326 891
DR Amsalu Bekele Ass - Professor of Medicine Head of Chest Unit Department of Internal Medicine Addis Ababa University, School of Medicine Addis Ababa, Ethiopia