Professional Documents
Culture Documents
Table10 WeftRegenCellulosics 06.22
Table10 WeftRegenCellulosics 06.22
Table10 WeftRegenCellulosics 06.22
Table 10: WEFT KNIT – 100% Regenerated Cellulosics, Acrylic and Blends Fabric Manual
Non-Stretch Fabrics
(5A) 40°C Line Dry 7,200 revs
>150gsm ± 5%
10a All Weights ~ Single Jersey L +1 to -6% 5% max Grade 4
<150gsm -3/+8%
W +1 to -6% Comment on Appearance
Stretch Fabrics
(5A) 40°C Line Dry 7,200 revs >150gsm ± 5%
10d All Weights ~ Single Jersey L 0 to -5% 5% max Grade 4 Min 80% recovery
<150gsm -3/+8%
W 0 to -5% Comment on Appearance
Pile Fabrics: Accelerotor Next Test Method 31. Maximum of 16% pile loss and negligible visual assessment. To be done before and after laundering.
pH: Fabric pH between 5.0 and 7.5 is required (refer to Test Method 33).
Burst Strength Test Method 22: Burst strength is not mandatory, but is subject to testing where requested by the Fabric Technologist. Requirement 250kPa.
Legislation and Safety: It is the supplier’s responsibility to ensure that product meets all Next safety testing requirements and legislative standards.
Click here to view additional care codes that must be used on garments with specific
features e.g. trims / belts / prints / sets / trade marks / warning wording etc