Professional Documents
Culture Documents
Mildot Master - Simplifying Your Precision Shooting Solution
Mildot Master - Simplifying Your Precision Shooting Solution
Mildot Master - Simplifying Your Precision Shooting Solution
Subscribe Today
EQUIPMENT
This post contains affiliate links. Click here to learn more about what that means.
A mong some of the niftier experiences I had back in my active duty days was learning
more about nuclear weapons. I spent a year working through a graduate program in
Nuclear Weapons Effects, Proliferation, and Policy.
Matt
Matt is the primary author and owner of
The Everyday Marksman. He's a former
That sounds boring, but I’m a super nerd. military officer turned professional tech
sector trainer. He's a lifelong learner,
Significant portions of that program meant learning how to passionate outdoorsman, and steadfast
supporter of firearms culture.
calculate the effects of weapons by hand. Given things like the
amount of uranium, type of device, and other things, we
needed to figure out what would happen.
Join the Tribe
Gain insights from pros, new
I always appreciated that making us learn the calculations was content notifications, vendor
discount alerts, and more!
the first step. After we demonstrated that we could do it, we
got to use logarithmic charts to make things significantly
easier.
These charts were the end result of someone else doing all the
work and putting it into an easy to read curve. All we needed One small example from our text book
\\\ Related
to do was reference a value we were interested in and find the relating to calculating the shockwave from a
corresponding point on the curve. Of course, there was a little nuclear blast Project Warhammer: Beginning
a Shotgun Journey
more math after that, but it was significantly faster than doing
it all from scratch.
Beginner’s Guide to the Best
AR-15 Upgrades
One example of a pressure curve used to calculate the effects of a nuclear blast.
Yes, my friends and coworkers think I’m one of the scariest people they know. But that’s
beside the point.
A minutes of angle is one sixtieth of one degree of a circle. With 360 degrees in a circle, there
are 21600 minutes of angle.
The quick version of this is to understand that a radian is another way to measure rotation
around a point. A milliradian, sometimes called a mil or MRAD, is 1/1000 of a radian.
Let’s assume our target is 100 yards away. Go ahead and type .001, for 1/1000th, into your
trusty scientific calculator and hit the “tangent” button. Then multiply this by 100, the distance
to the target. Next, multiply that result by 36. This is inches per yard.
Tangent(.001)*100*36 = 3.6000012″
That’s the dirty way of saying that one MRAD is about 3.6 inches at 100 yards. It’s not exact,
just like one minute of angle isn’t a perfect 1″, but it’s close enough to work with.
The convenient part about this is that if you multiply that by 10, it’s 36 inches at 1000 yards.
One milliradian equals one yard at 1000 yards. A six-foot object at 1000 yards is two mils
measured this way.
That’s convenient.
As a bonus, milliradians work just as well with meters. One MRAD equals one meter at 1000
meters.
MRAD Formulas
Here’s a quick look at the math for calculating range. This isn’t comprehensive, that’s for
another post. I just want to illustrate how it works.
If you know the size of the target in either yard or meters, the math is straight forward.
If you know the size of the target in centimeters, and want your range in meters, it’s not too
bad.
However, if you want your range in meters like the rest of the military does, but you’re a red-
blooded American who uses inches instead of centimeters, it gets messier.
If you attend any precision rifle school, you’re going to memorize these formulas. Here’s the
thing though, nobody really wants to be sitting out in the field punching numbers into a
calculator.
Most of my audience is in the United States, which means we haven’t bought into using
centimeters for measuring things. We think in terms of inches and yards.
That being the case, measuring our target in a reticle and then multiplying by 25.4 or 27.8,
depending on if we want meters or yards, is dumb.
Like the logarithmic pressure curves I used when studying nuclear weapon effects, the handy
Mildot Master is a quick reference slide rule that’s already done the math for me.
The system has two major components. The first is an outer plastic sleeve with an MRAD scale
on it. There are two windows, one for determining range and one for calculating windage or
drop. Interestingly, the drop/windage window also has a MOA scale on it in case your turrets
are mismatched from the reticle.
The second component is the interior laminated card that slides back and forth. The card is
reversible, with yards on one side and meters on the other.
Once you have that, find the corresponding marking for the size of the target in the left
window. Slide that marking to the point that best matches what you measured. The range to
the target appears just to the right.
In this example, a 6-foot tall target measured about 3.2 mils in the optic. I slid the 6’0″ marking to that point on the left, and the target range is
Also handy is that the mildot master includes a simple way to estimate the angle to the target
using a string and pivot point on the back. If you are not level with the target, the notches
below “Target Range” give you the corrected range to target given the angle.
Remember, either aiming at an upward or downward angle affects the trajectory of the bullet
the same way: you’ll need to aim lower on the target as if it was closer to you.
Once you know the range to target, you need to calculate your drop and windage for a firing
solution.
If you’re on top of things, you’ve probably already got a dope card to tell you how much
elevation to dial for the given range. But wind is a different story.
The bullet drop and windage calculator on the Mildot Master, also useful because it lists MOA as well as Mils
A lot of precision rifle shooters track their windage in terms of inches per drift at each
distance given a 1 mph crosswind. So, if I know my shot will drift 2.3 inches at 500 yards in 1
mph of wind, a 5 mph crosswind means it will drift 11.5 inches.
Keeping the inner card at the same point, I look over to the right window and see that 11.5″
corresponds to about .5 mils of holdover (or dope) at 630 yards.
The Mildot Master lets you do the same thing. If you know the distance to the target and how
it measured in the reticle, you just work in reverse. In the left window, line up the distance to
the target with the target range indicator. On the left, scan for the measurement you saw in
the reticle. The size of the target is next to it.
Handy, right?
Matt
Matt is the primary author and owner of The Everyday Marksman. He's a former military officer turned
professional tech sector trainer. He's a lifelong learner, passionate outdoorsman, and steadfast supporter
of firearms culture.
Project Gungnir: My First Savotta Jääkäri S – The Raw The Recce Rifle: Builder’s Guide
Precision Bolt Gun Truth Review to Modern Classic
Discussion
Subscribe Login
{} [+]
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Tony
Guest
Reply
Replying to Tony
Hey Tony! It’s funny you mention that. It’s on my list of things to write about.
The very short version is that it’s a handy little piece of kit. I can tell a definite
difference in the optical quality between it and some of my $1K+ rifle optics,
but it’s not bad by any means. If you can wait a week or so, I should be able
to get something together!
Reply
Tony Guest
Thank you! I’ve been going back and forth on whether to buy the
cheaper one or to try to scratch up the money for the more expensive
version. Glass quality is mostly what I am worried about, as well as
overall sturdiness of the optic. I’m sure your review will be extremely
helpful. 🙂
Reply
Mark Carroll
Guest
When shooting on an angle at a material distance and angle, hold low – not higher
https://primitivesurvivors.com/high-angle-shooting-always-hold-low/
Reply
Matt Author
Reply