Professional Documents
Culture Documents
MQL System Lubrix v5 v7 Flyer Eng
MQL System Lubrix v5 v7 Flyer Eng
• Transfer units
• Portal milling machines
• Turning-milling-centres
• Flexible production systems
• Double-spindle machine tools
• Multi spindel heads (V7 / V7 TWIN)
The experts at LUBRIX work out the optimum strategy for every
tool and every material. To offer each user an ideal solution,
LUBRIX has developed a modular building block concept, which
is used to fit the MQL-System perfectly to the demand of the
process concerning the part, the tools and the machine tool.
The series V5 / V5TWIN and V7 / V7 TWIN are available in different
versions:
• as
a basic MQL-System including contol unit, process monitoring
and automatic refill system
• w ith or without high pressure modul
• with or without an integrated field bus interface
(PROFIBUS / PROFINET)
LUBRIX GmbH
Heinkelstraße 7-9
73230 Kirchheim/Teck
Germany
Phone: +49(0)7021-48 29 000
Fax: +49(0)7021-72 09 50
info@lubrix.de
BETTER MINIMAL www.lubrix.de
Visionary ideas … …Revolutionary results
Better on principle
-25% LUBRIX MQL-Systems replace conventional coolant
within modern machining processes. Thanks to
the special technology, the friction between work
piece, chip and tool becomes distinctly reduced.
Because of that, less heat is produced, the tools
last longer, the cutting speeds increase and thus,
the complete process time lowers down. Depending
-20% on the individual machining process, cost savings
up to 30% can be achieved.
-15% •
•
shorter processing times
better surface quality
• dry chip and work pieces
• less space required
To reduce energy consumption within cutting processes and to realize a • no cost for coolant or disposal
resource saving and thereby ecological production – this goal is a focus • clean workplaces
of technological development. Dry machining and minimum quantity • employees exposed to less pollution
lubrication can offer enormous potential for optimization that lead to • more environmentally friendly
valuable competitive advantages. Ingo Grausam, CEO LUBRIX GmbH • longer useful lifespan of the machine
Aerosol delivery
Aerosol can be transported to the cutting edge of the tool either through We set trends
the tool or via nozzles on the side. It is produced within the MQL-System Today, many automotive manufacturers,
using process-technical regulating algorithms and can be transported suppliers and other industrial organisations
through the machine to the tool by simple piping. from all kind of industrial areas are satisfied
customers of the LUBRIX technology.
Innovation price of
the state of Baden-
Württemberg
TOP-10-UNTERNEHMEN 2008
Lubrication oil
Recommended MQL lubricants consist exclusively of synthetic
or biological based materials. The filling of the system is carried
out fully automatically, free of maintenance and is absolutely
process safe. Stuttgart, 4. November 2008
System control
Price of Baden-
The individual volume flows are optimally regulated Günther H. Oettinger
Ministerpräsident
des Landes Baden-Württemberg
Christian Brand
Vorsitzender des Vorstands
der L-Bank
Württemberg
by the internal control of the MQL-System and all for succesfull
data for process montioring is transfered to the companies.
control of the machine tool. A particular advantage
of LUBRIX is the instrument response time of
< 0.1 seconds, so that the systems also function safely
in highly dynamic and fast machine tools. Communication
• PROFIBUS
• PROFINET
• Field bus
• Digital I/Os